Martin Klebetechnik

Condition: excellent (used), Year of construction: 2001, Jumbo roll Ø max. 1600 mm Jumbo roll width min. 560 mm Jumbo roll width max. 1400 mm Expanding chucks Ø 76 mm, 100 mm, 150 mm and 300 mm Fsdpfx Asxlkckefpegh Speed depending on material: 200 to 300 m/min Paper grammage: 120 to 600 g/m² Machine can be demonstrated in operation.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, The Easymount Double Hot EM-1200DH is a 1200mm/47″ heat-assisted wide format laminating and mounting system, which contains rollers that heat up when used. Specifications Laminating Speed (m/min / feet/min) 3.9 / 13 Max. Width (mm / inches) 1200 / 47 Mounting Thickness (mm / inches) 25 / 1 Roller Diameter (mm / inches) 112 / 4 Warm-up Time (mins) 15 Hot Roller Heater System infrared Laminating Temperature Range (°C/°F) 0-130 / 32-266 Control Panel Digital Pressure Adjustment Manual/Gauge Film Core (mm / inches) 77 / 3 Power Supply AC (v, 50Hz) 220/240 Power Supply AC (v, 60Hz) 110 Fgjdsxlaqdspfx Afpoh Power Supply Required (Amps) 32 Power Consumption (W) 3950 Dimensions – Width (mm / inches) 1700/67 Dimensions – Depth x Height (mm / inches) 785 x 1255 / 31×49 Gross Machine Weight (Kg / lbs) 270 / 595

Condition: used, Year of construction: 2003, • Web width: 1300 mm • Max mechanical speed: 400 m/min (depending on materials and process) • Substrate types: Film, foil, paper, and combinations thereof Main Components and Features Automatic web tension control across all unwinds and rewinds Motorized adjustment for nip pressure and web alignment Touchscreen HMI for process control and recipe management Modular design for easy access and maintenance Web inspection and defect detection (if installed) Corona Treatment Unit Nordmeccanica Solventless Mixing Unit Continuous, inline mixing of two-component adhesive system Equipped with: Precision gear pumps for both A and B components Automatic ratio control and monitoring Pumps for continuous filling to ensure uninterrupted production Fsdpfsxg Hqaex Afpsgh Easy-access design for cleaning and maintenance Drying Tunnel Equipped with 2 thermal oil heating batteries Provide stable and efficient heat transfer Maintain consistent tunnel temperature, essential for proper adhesive drying Integrated with 2 modulating valves Automatically adjust the thermal oil flow Enable fine control of tunnel temperature for different lamination applications LEL (Lower Explosive Limit) Monitoring System Zellweger LEL sensor. Continuously monitors solvent vapor concentration

Condition: good (used), Year of construction: 1991, Very good condition. Fully overhauled in 2023. Flat handle unit installed. The machine offers both 1-ply and 2-ply operation modes. It is equipped with slit equipment for the bag bottom formation. Bag width (without handle): min. 160 mm – max. 320 mm Bag width (with handle): min. 250 mm (between handle centers) – max. 320 mm Bag gusset (without handle): min. 60 mm – max. 180 mm Fsdpfx Aoxfl Izefpogh Bag gusset (with handle): min. 250 mm (between handle centers) – max. 180 mm Bag cutting length (without handle): min. 350 mm – max. 610 mm Bag cutting length (with handle): min. 350 mm – max. 580 mm Roll width: min. 460 mm – max. 1020 mm Maximum roll diameter: outer layer – 1500 mm / inner layer – 1300 mm Core diameter (paper roll): 76 mm Paper grammage: 1 ply – 50-120 gsm / 2 ply – up to 100 + 80 gsm (as produced) Number of forming plates (for bag width): 7 Forming plate sizes: 160, 180, 240, 260, 280, 300, 320 mm Gear sizes (for cutting length): 35, 36, 41, 45, 48, 50, 55, 56, 57, 58, 62 Approximate production speed with handle: 100 pcs/min Approximate production speed without handle (1 ply): 150 pcs/min Approximate production speed without handle (2 ply): 120 pcs/min Total electrical load: 25 kW Paper roll loading mechanism: automatic for outer layer, by forklift for inner layer Machine dimensions (W x L x H): 4.5 m x 13 m x 3.3 m

Condition: used, Year of construction: 2012, High-speed polyethylene extrusion line, used for single-side polyethylene coating on paper cups and other paper containers. This is an industrial extrusion coating line designed for laminating polyethylene onto paper substrates. The machine produces PE-laminated paper, commonly used in the manufacturing of food packaging (paper cups, trays, boxes, etc.). It is a specialized piece of equipment for the paper packaging industry, providing barrier properties against liquids and grease. Fgedexdimfjpfx Afpjh Main technical specifications Melt slot length: 1200 mm Finished product width: 500–1150 mm Operating speed: 100–150 m/min Extruded film thickness: 0.01–0.08 mm Maximum roll diameter: 1200 mm Maximum extrusion capacity: 120 kg/h Installed power: 97 kW Dimensions: 7500 × 7800 × 3200 mm Weight: 14 tons

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, working width: 1,420 mm, Year: 1986 Width/mm: 1420 Thickness/µm: 14-400 Material: PO, PE, paper, HDPE, LDPE Detail: Plant consists of: 2x Fife edge trim control 2x Ahlbrand MFD 2000 pre-treatment units (year 2001) 1x Print Concept UV unit type PC 2w-1600-2x1 (year 2001) Coating unit with individually temperature-controlled rollers. Fgedpsxcy Hyofx Afpsh Sleeve system D: 76mm. Several spare parts included.

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 6878, working width: 1,020 mm, total width: 2,000 mm, total length: 12,000 mm, total height: 3,000 mm, stack height: 840 mm, Laminating machine FK 102 S in very good used condition Sheet size min 30 x 45 cm Sheet size max 102 x 124 cm Feeder: Billhöfer A-20-P Smoothing calender: GK-4-1080 Sheet separator: Achilles BT 4.1 Fedpfxexb Dq Tj Afpogh Stacker: Bremser S102A1 Additional equipment: pneumatic side lay by TPM electronic overlap control by PME automatic film brake by Achilles film cutting device by TPM spare roller (lamination counterpressure) new, included The machine can laminate using both water-based and thermal films (heating units required) Dismantling/transport/possible customs duties etc. must be organized by the buyer.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, working width: 1,250 mm, type of input current: three-phase, total width: 3,500 mm, total length: 30,000 mm, total height: 3,000 mm, stack height: 2,000 mm, Equipment: double-sided, For sale: Production line designed for manufacturing honeycomb structure laminate. Fsdpfx Aew Tbawsfpegh The machine was custom-built for in-house use. Equipment includes: Paper unwind modules, cell forming and unwind roller module, gluing unit, calibrator, conveyors, presses, longitudinal and cross-cutting modules. The machine is ready for testing and features automatic core feeding, automatic glue feeding, stepless speed adjustment, plate heating chamber, 9 longitudinal saw sections, and a cross-cutting section. Line speeds: 2 to 6 m/min. Videos available via WhatsApp.

Condition: used, Year of construction: 1996, Web width: 1,300 mm Mechanical speed: 300 m/min Unwind diameter: 800 mm (shaftless, single-position) Rewind diameter: 800 mm (shaftless, single-position) Core diameter: 3" Web direction control: Integrated web guiding system Fjdpfx Afow N Nhzopsgh

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: MATRICOLA NR 1155-06, working width: 1,200 mm, type of input current: three-phase, total width: 4,000 mm, total length: 12,000 mm, total height: 3,000 mm, stack height: 1,500 mm, overall weight: 13,000 kg, Sheet laminating machine with water-based glue system + dryer. Max. format 120x160. Hot knife. Automatic stacker. Overhauled in 2020: coating rollers and heating units replaced. Fsdpfx Asw Hr Imefpjgh

Condition: good (used), Year of construction: 1991, Asitrade - Bobst Laminating from reel to sheet. Corrugated board: F-, E-, B-flute Year: 1991 Fedpfxjwtxy No Afpegh Max. speed: 120 m/min Max. size: 1450x1650 mm Min. size: 680x550 mm Pile turner 2x automatic splicer 4x automatic rewinder/rolls

Condition: excellent (used), Year of construction: 2021, Coated web width 1315 mm Max. web width 1330 mm Max Core width with expanding chucks 1300 mm Max Core width with Standard cones. 1340 mm Minimum web width 650 mm Unwinder reel diameter 1000 mm Rewinder reel diameter. 1000 mm Fodpfxswqdikj Afpegh Core size - unwinder: 3”= 76 mm & 6”= 152 mm - rewinder 6”= 152 mm Max. web tension - unwinder 40 kg (400 N) - rewinder 55 kg (550 N) Taper tension on rewinder up to 60% of the set value. Min. web tension - unwinder: 2 kg (20 N) - rewinder: 4 kg (40 N) Max reel weight: 1.000 kg Max mechanical speed: 450 m/min

Condition: used, Year of construction: 2014, functionality: fully functional, Coated web width 1315 mm Max. web width 1330 mm primary unwinder: 1000 mm secondary unwinder: 1200 mm rewinder: 1200 mm speed: 400 m/min Accessories: - Solvent-less mixer Nordmeccanica - Continuous filling World Mixer (with 4 tanks of 200 kg) - 5 rolls Materials: COATED WEB Fgsdpfx Afswp R Htepoh BOPP 12 - 80 μ, PETP 10 - 30 μ, LDPE, LLDPE 30 - 200 μ, OPA 12 - 18 μ, NYLON CAST 30 - 80 μ ALU (Foil) 6,3 - 40 μ, PP CAST 60 - 150 μ, PAPER 40 - 150 gr/m2 LAMINATED WEB BOPP 12 - 80 μ, PETP 8 - 30 μ, LDPE, LLDPE 20 - 200 μ, OPA 12 - 18 μ, NYLON CAST 20 - 80 μ ALU (Foil) 6,3 - 40 μ, PP CAST 20 - 150 μ, COEX FILM 25 - 200 μ PAPER 40 - 150 gr/ m2

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, Lamina GL 1400 Year: 2017 Max size: 1400 x 2150 mm Min width: 70 mm Glue type: 2 guns with hot melt by Nordson Extras: 2 cold tape guns adhesive Very good condition Available immediately Fgodpfswna R Eox Afpsh Located: Europe Eastern

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: 610, Cutting and printing line for 3-layer cardboard with flexo printers (2-colour printing) - maximum sheet size 950 x 2200 mm (skip - feed 1200 mm) - minimum sheet size 260 x 280 mm Machine dimensions length - 3550 mm width - 3660 mm height - 3500 mm weight 8000 kg power consumption - 8 kW Fedowl Izyspfx Afpsgh Feeding unit to the device using a strip. The operation is supported by sucking the sheet with an air pump

Condition: good (used), Year of construction: 2007, stream feeder single-side lamination hot lamination using thermofoil or dispersion glue max speed when applying water dispersion glue 50m/min max speed hot lamination 70m/min material 80 - 600 g/m2 Fgodpfewl Hw Hox Afpeh delivery

Condition: ready for operation (used), Year of construction: 1984, Minimum sheet size: 210mm/300mm, maximum sheet size: 1180mm/1600mm, production speed: 45m/min, paper weight range: 80g-600g/m², total machine length: 11000mm, total machine width: 3500mm. An on-site inspection is possible. Fgjdev T Apvepfx Afpsh

Condition: ready for operation (used), Year of construction: 2021, A complete laminating line is available. General data: Fabric weight range: 125g/m²-1800g/m², fabric width range: 1050mm-3200mm, upper roller width: 3400mm, creep speed: 2m/min, creep speed: 10m/min, production speed: 100m/min, total system length: 28100mm. 1) Fabric storage infeed and outfeed Suchy, year of construction: 2012, roller width: 3400mm, guide roller diameter: 200mm, max. fabric thickness: 20mm, max. fabric width: 3200mm, fabric storage: approx. 50m, operating speed: 60m/min, machine dimensions X/Y/Z: approx. 4200mm/5550mm/3600mm, weight: approx. 4250kg. 2) Powder control Klieverik, scattering roller width: 3500mm, scattering roller diameter: 188mm, max. scattering width: 3200mm, max. scattering capacity: 2000g/m/min, powder size range: 100µm-600µm, machine dimensions X/Y/Z: approx. 4750mm/600mm/700mm, weight: approx. 1100kg. 3) Laminating machine Klieverik, year of construction: 2012, printing blanket dimensions X/Y/Z: 7310mm/3500mm/7mm, heating power: 100kW, heating cylinder diameter: 760mm, thermal oil tank: 800l, max. working temperature: 240°C, heating time at 3m/min and 6m/min: approx. 2h/3h, machine dimensions X/Y/Z: approx. 2100mm/5000mm/2300mm, weight: approx. 9000kg. 4) Winder Tekatex WL-35, year of construction: 2022/2023, working width: 3500mm, machine dimensions X/Y: 4500mm/1050mm, weight: approx. 1300kg. Documentation available. On-site inspection is possible. Fodpfx Afsv R Ex Iepsgh

Condition: used, Year of construction: 1960, We are closing the production line for decorative paper used in furniture production, including finish foils and paper edges. The entire equipment listed below is now available for sale. Prices are negotiable. For more information or to make an inquiry, please contact us via email or phone. 1. Cerutti Printer + Rewinder + Laboratory Printer Cerutti Printer Year of manufacture: 1987 Control software: No data, manual control Working width: 600 mm to 2200 mm Number of printing columns: 4 Dryer type: Electric Speed: 120 m/min Unwinder: 2-axis Winder: 3-axis Approximately 50 printing cylinders available Automatic ink mixing system Rewinder Year of manufacture: 2010 Working width: Up to 2200 mm Rewind roll diameter: Up to 1000 mm Speed: Up to 300 m/min Automatic web guide system, three cutting knives Shaft diameters: 76 mm and 152 mm Laboratory Printer Year of manufacture: 2018 Control software: LENZE Working width: Up to 730mm Number of printing columns: 4 Dryer type: Oil (one converted to electric) Speed: 100 m/min Shaft diameter: 76 mm 2. Impregnator + Related Equipment Manufacturer: Vits Year of Manufacture: 1970s Working width: 600 mm to 2100 mm Control software: Manual Dryer components: 2 dryers, each 10 m long Installed components: Impregnating tank, varnishing station Dryer medium: Oil, heated by a gas furnace Working speed: Impregnation: 12-17 m/min, Varnishing: 40 m/min, Maximum mechanical speed: 50 m/min Resema Cutting Machine Cuts paper rolls up to 600 mm in diameter, with a 152 mm core Kacper Edge Cutting Machine Edge cutting width: 700 mm Automatic web guide system Available knives and sleeves for cutting widths from 16 mm to 60 mm Unwinder and winder shafts: 152 mm Hardo Edge Gluing Machine For applying hot-melt glue to edges, can process up to 4 rolls simultaneously Speed: 35 m/min Power supply: 400V 1 complete unit, 2 units for parts Rewinders for Edges Programmable rewinding meters - 6 units 3. Film Embossing Machine + Related Equipment Full documentation available separately 4. Laboratory Press Year of manufacture: approx. 2015 Heating method: Electric, 400V Maximum temperature: 250°C Cylinder diameter and stroke: 100 mm (distance between press plates) Maximum hydraulic pressure: Not available Heating plate dimensions: 320 mm x 320 mm 5. Other Laboratory Equipment Laboratory dryers: BINDER, up to 300°C Microscope Fodpfxsv Dxfbj Afpegh Platform scale: 2000 kg 6. Reactors, Mixers Water-heated jacketed mixer (new), capacity: 1500 l, 400 W Dispersion mixer with two stirrers and interchangeable tanks: 2 x 500 l and 1 x 100 l, speed: 800-1200 rpm, rotor diameter: 270 mm, 400V Slow-speed mixer with two stirrers, capacity: 2000 l Storage tanks: 2 tanks, capacity: 30,000 l For more details or to schedule a viewing, please contact us via email or phone.

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Fjdpfx Aovy Aipjfpogh Film thickness 10-50 microns Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Very good technical and visual condition. Fjdpfx Afsvkg H Tepjgh The machine in continuous operation – test and presentation possible. Availability: January 2025 Location: European Union     Machine imported, installed, and under service care by the official GMB distributor. Only one user.   The best-selling model of GMB's automatic laminator.   A renowned manufacturer specializing exclusively in laminating machines since 1985. Exporting to 150 countries, GMB holds a 40% share of the domestic Chinese market and international exports.   Automatic Pallet Feeder Front and side-lay margin control Touchscreen controller Large diameter chrome-plated calender Electromagnetic heating – rapid heating within 90 seconds Stable operating temperature Hydraulic pressure Pneumatic sheet separation unit Anti-curl bar Automatic high-capacity stacker – pallet-based output   MODEL: SWAFM-1050 Max Sheet Size: 1050 x 820 mm Min Sheet Size: 300 x 300 mm Laminating Speed: 65 m/min Paper Thickness: 105 – 500 g/m2 Gross Power: 35 kW Total Weight: ok. 3000 kg Dimensions (szer. x głęb. x wys.) ok. 5800 x 2200 x 1900 mm Pressure system: Hydraulic Max. pressure in hydraulic system: 8 MPa

Condition: good (used), Year of construction: 1995, Stock drum bucket + press belt Type: SFAM 712_G Year: 1995 Max. size: 1650mm Press belt Tünkers Fgodpeu Uclujfx Afpoh

Condition: good (used), Year of construction: 2017, working width: 1,450 mm, 1450 Automatic backlapping machine Automatic sheet feeder Automatic carton feeder Automatic register with servo motor Output blanket Fgsdpfx Afourivvopsh

Condition: good (used), Selling CRATHERN, PERONDI IA630, NA 900. Fgedpfx Afjud Axgspoh

Condition: good (used), Year of construction: 2000, Max. Sheet format. 1420 x 1620 mm Min. sheet format: 500 x 500 mm - with MIRUS sheet feeder, type HSII - Suction belt sheet feeder, type 4R - Press belt, type 5 - Package turner (forks) with non-stop device, type 8 Fgsdpfx Ajtru Hzofpoh - Pile stacker with non-stop roller carpet, type 7 Technical data: Working width: 1500 mm Max. Sheet width: 1420 mm Max. Sheet length: 1640 mm Lamination tolerances: +/- 1.5 mm Material thickness: - Carrier material from 0.6 - 7 mm. Single-sided corrugated board only runs through the machine with a stationary flute. - An additional needle bar is required for cardboard of approx. 400 - 500 g/m². is required. - Cover sheet from approx. 180 - 400 g/m². Deviations possible depending on material properties.