Marovt d.o.o.

Condition: used, Year of construction: 2010, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Heidenhain iTNC 530 tool taper SK 50 number of tool places 120 Pos. On-time hours ca. 66737 h spindle hours ca. 36316 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Fully protective cabin with sliding doors and interior lighting - Setup room - Tool measurement in the work area with BLUM laser Lasdpfx Afoxylqxelsi - 3D measuring probe - Operating modes 3 bar internal coolant supply with 600 l tank and paper belt filter - Chip flushing gun with 1 bar/ l pump - Chip conveyor - Brankamp monitoring system - 3-color signal light - Coolant ring nozzle - Blow-air cooling system - Coolant system - Oil/emulsion mist separation system - Control cabinet cooling unit - Operating manuals Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 6110 mm Measurements depth 3380 mm Measurements height 3280 mm Machine weight 24000 kg Main Drive Spindle speed range 12000 Laodsxya A Nepfx Aflei Number of axis 4 Movement X-Axis Movement 1000 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 900 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 1000 mm Z-Axis Rapid Traverse 60 m/min Tools Number of station 150 Max weight 25 kg Max tool diameter 140 mm Max tool length 450 mm Type of tool holder HSK 100 This 4-axis Okuma MA 600 HB was manufactured in 2011, featuring a robust horizontal machining center design. It boasts X, Y, and Z axis travels of 1,000 mm, 900 mm, and 1,000 mm respectively, and a maximum spindle speed of 12,000 rpm. The machine includes a high-capacity 150-tool chain magazine with rapid tool change times. Consider the opportunity to buy this Okuma MA 600 HB horizontal machining center. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Kitamura HX630i Horizontal Machining Center Year of manufacture: 2010 Control: Fanuc 16i-MB Travel paths: Lodpsxx Drxofx Afljai X: 1000 mm Y: 800 mm Z: 820 mm B axis: 0.001° Table size: 630 mm x 630 mm Spindle: 12,000 rpm Tool changer: 50 positions Tool holder: BT50 The machine is in very well-maintained condition.

Condition: used, Machine type: CNC Horizontal Machining Center Model: FH6800 Manufacturer: MAZAK Control: Mazatrol 640M Year of initial operation: 2010 Location: Germany Options: Ledpfxexxzlvo Afleai - Number of tool magazine pockets: 80 pcs - MAZAK Monitoring B (Renishaw probe) - Software options package “Performance” - NC rotary table (C-axis) 0.001 degree - Chip conveyor Mayfran Consep 2000 - Through-spindle coolant (IKZ) pressure: 20 bar Travel X-axis: 1,050 mm Travel Y-axis: 800 mm Travel Z-axis: 880 mm Rapid traverse X/Y/Z-axis: 40 m/min Pallet size: 630 x 630 mm Max. spindle speed: 7,000 rpm Coolant supply: 20 bar

Condition: excellent (used), Year of construction: 2015, operating hours: 32,000 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller model: Sinumerik 840Dsl, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, rotational speed infinitely variable, 2x Heller H6000 + Fastems Container Automation Horizontal Machining Centers with Flexible Pallet Container Heller H6000 2 machines with identical specifications Travel ranges Feed force X 1000mm 15kN Y 1000mm 15kN Z 1000mm 20kN B 360°, 0.001° Direct linear measurement system on all axes Rapid traverse: Axis dynamics Power X/Y/Z 50 m/min, 5m/s² B 25 rpm Spindle – Power Cutting Interface: HSK100 Speed: 5–8000 rpm Power: 43kW (40% duty cycle) Torque: 822Nm (40% duty cycle) Last spindle replacement: 2020 Tool Magazine Type: Shelf magazine Magazine positions: 265 Max. tool length: 600mm Max. diameter: 280mm Tool coding: Balluf chip Second control panel at setup station Setup station with 7 exchange positions Pallet changer Pallet size: 630x630mm Max. interference circle: 1000mm Max. height: 1200mm Max. weight: 1000kg Coolant system: Scraper belt chip conveyor Knoll coolant system Paper band filter Internal coolant supply (ICS) 50 bar, frequency controlled Work area rinsing Emulsion mist extraction Disc blow-off device for operator door Additional equipment: Facing slide device (auxiliary axis/U-axis) 4 facing slides per machine Tangential control incl. NC cycles Wireless measuring probe (Renishaw) Space requirements: 7100x3750x4300mm (LxWxH) Machine weight: 15,600kg Total power requirement: 44kVA Control: Sinumerik 840D sl Fast drill breakage monitoring Process-integrated tool monitoring Status lights 3D workspace model data Operating data acquisition (OPC/UA) Year of manufacture: 2015 Operating hours: approx. 32,000h (Machines still in operation) Fastems Pallet Automation FPC1500 Base container with 2 setup stations Extension container Total 20 pallet positions on 2 levels Control: MMS Space requirements: approx. 18x2.4x4.2m Total space requirement for the system (2x Heller + Fastems) approx. 18x10x4.5m Machines are still in ongoing production. Ledpfx Aoxxx Dcjfljai Inspection possible by arrangement. Relocation of the machines can be organized.

Condition: used, Year of construction: 2007, operating hours: 40,933 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Siemens, controller model: 840D PL, table width: 630 mm, table length: 630 mm, spindle speed (max.): 8,000 rpm, number of spindles: 1, Machine name / type: HELLER / MCH 280 C Operating hours: 40.933h Year of construction: 2007 Control unit: Siemens 840D PL Spindle: 8.000 rpm (43 kW/ 822 Nm) Tool clamping system: HSK 100 Tool magazine / places (Options): Rack / 234 (Operating panel at the tool loading station with terminal) Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, VRF 250, IKZ 70 bar, (work area flushing) Positioning range XYZ (mm): 100 / 1000 / 1000 Laedpfx Asxwpmxjflei Pallet size (mm): 630 X 630 Workpiece clamping: mechanical Additonal options: Receiver for measuring probe (RENISHAW); interface exhaust system; additional weight for pallets; drill fracture sensing; status lamp; interface exhaust system; integrated tool and collision monitoring; toolshaft cleaning; tool codechip; Interface handheld;

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, Description: Heidenhain 530 iTNC Control Working ranges X-axis [mm] 1,600 Y-axis [mm] 1,200 Z-axis [mm] 800 B-axis rotary table 360° C-axis W-axis Milling head Power (S1/100%) [kW] 25 Torque (S1/100%) [Nm] 200 Spindle speed [rpm] 10,000 Tool holder HSK-A100 Table size [mm] 1,600 x 1,600 Maximum workpiece weight [kg] 10,000 Rapid traverse [mm/min] 30,000 Axis acceleration [m/s²] 2.5 Automatic tool changer for 10 tools Ledpfexwbbnjx Aflsai IKZ (internal coolant supply) Chip conveyor Machine weight [kg] 40,000 (total) Robust 4-axis machining center, specifically designed for tool, mold, and die manufacturing 4-sided machining enabled by rotary table Enclosed double-beam and cross-slide structure with an internally, completely guided ram-type milling unit Vertical gantry design ensures controlled dynamics and high accuracy Consistently excellent milling results due to load- and thermo-symmetrical machine architecture Stationary workpiece setup guarantees consistently high surface quality High productivity through roughing and finishing in a single setup Optimal chip removal, especially in deep cavities

Condition: used, Year of construction: 2001, Toyoda 'FH100 II' Twin Pallet Horizontal Machining Centre with Fanuc 16i-M CNC Control Ljdpfjxvx Rwox Afloai X' Axis Approx 1,600mm, 'Y' Axis Approx 1,400mm, 'Z' Axis 1,100mm; Feed (X) Approx 950mm; (2) Pallets, 1050mm x 1050mm, Max Load 3,000kg; (120) Station ATC; Minimum Index angle 1°; Distance from Table Surface to Spindle Centre Approx 50mm-1,450mm; Distance from Table Centre to Spindle Nose 20mm-1,400mm; Geared Headstock; Max Tool Dia (Adjacent Pockets) 120mm; Max Tool Length 600mm, Max weight per Tool 35kg; Spindle Taper BT50; Spindle Speeds 10-6,000 RPM; S/No. 9224. Weight of Machine Approx 30,000kg; Floor Space Required Approx 4,565mm x 8,300mm; Stand Alone FSE Filtration System with Controls; MistMaster Extraction System; Access Platform; Shernidian Electric PS-111 Motor Starter; Handy Pulser Generator Hand Wheel.

Condition: good (used), Year of construction: 2017, Ref. -No.: 10596 Manufacturer: HELLER Type: H - 2000 Year of construction: 2017 Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: 56XXX X-Travel: 630 mm Y-Travel: 630 mm Z-Travel: 630 mm B-Axis: 0,001 ° Table Load: 500 kg Max. Tool Length: 350 mm Max. Tool Diameter: 160 mm Tool Taper: HSK 63 Numbers Of Tools In Magazin: 80 Turning Speeds: 16000 RPM Tool changer: Doppelgreifer Max. Workpiece height: 850 mm Max. Torque: 95 Nm Rapid Travel X/Y/Z: 60 mm / min Rapid Traverse X-Axis: 80 m / min Rapid Travel Y-Axis: 80 m / min Rapid Traverse Z-Axis: 90 m / min Drive Capacity - Spindle Motor: 40 kW Internal cooling: 50 bar Numbers Of Pallets: 2 Size Of Pallet: 400 x 500 mm spindle running time: 1000 H Operating hours: 3000 H Lasdpfxjxvw Ris Afloi Workpiece interference circuit max.: 720 mm Media interface: 5 - fach Further information: - Equipped with NC rotary table. - State-of-the-art spindle technology. - Ideal for precise machining tasks. - Spindle hours: 1000. - Pallet can be rotated manually 4 x 90 - Hydraulic pressure 200 bar - Quick drill breakage check Machine can be viewed under power by arrangement

Condition: good (used), Year of construction: 2011, Ref. -No.: 10565 Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2011 Type of control: CNC Control: Fanuc 31i - A Laodpfoxvw I Iex Aflsi Storage location: Halberstadt Country of origin: Japan Serial no.: NS3XXXX X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Distance Spindle /Table: 200 - 1050 mm Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Max. Tool Diameter: Ø120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Rapid Travel X/Y/Z: 60 mm / min Tool to tool: 2,4 sec Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Pallet height: 1200 mm Positioning (X, Y and Z axes):: + - 0,003 mm Repeatability (X, Y and Z axes):: + - 0,0015 mm Payload pallet: 800 kg Axial: 14700 N Further information: - Cutting feed (same for X-, Y- and Z-axis): 0.001 - 30m/min - Distance between spindle center and upper edge of the area: 100mm - 900mm - Table size range: 630 mm - Positioning of the lower table: 1 ° - Positioning of the rotary table: 0.001 ° - Tools used: SK 50 - Operating oil: 53l - Slide lubricating oil / spindle head lubrication: 3.0 l - Coolant for spindle & ball screw head: 37l Machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10564 Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2008 Type of control: CNC Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Serial no.: NS2XXX X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Max. Tool Diameter: Ø 120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Lajdjxvw Izepfx Afloi Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Further information: - Equipped with IKZ and chip conveyor - NC rotary table 360,000 * 0.001° Machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2007, Ref. -No.: 10357 Manufacturer: STARRAG HECKERT Type: HEC 630 Athletic Year of construction: 2007 Type of control: CNC Steuerung Control: Sinumerik 840D Storage location: Halberstadt Country of origin: Schweiz X-Travel: 1200 mm Y-Travel: 950 mm Z-Travel: 1200 mm Work spindle drive power (25% ED): 67 kW Work spindle torque (25% ED): 1508 Nm Tool Taper: HSK-A100 Workpiece interference circle diameter: 1250 mm Tool Piece Magazine With: 80 Pcs./pcs. Tool changer: Werkzeugkettenmagazin Max. Workpiece height: 1200 mm Feed Speeds X/Y/Z Axis: 60000 mm / min Feed Capacities X/Y/Z: 22/18/22 N Laodpfxjxvw Eye Aflji Speed range - main spindle: 20 - 6000 RPM Numbers Of Pallets: 2 Max pallet load: 1500 kg Size Of Pallet: 800 x 630 mm pallet change time: 14 s Pallet clamping area (lxw): 800 x 630 mm Weight Of The Machine Ca.: 25 t

Condition: good (used), Year of construction: 2008, Ref. -No.: 10335 Manufacturer: HüLLER HILLE Type: NBH 170 Year of construction: 2008 Type of control: CNC Control: Sinumerik 840D pl Storage location: Halberstadt Country of origin: Germany X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 800 mm B-Axis: 360 ° Distance spindle center - table: 150 mm Table Dimensions (Lengthxwidth): 500 x 630 mm Table Load: 800 kg Max. Workpiece Weight: 40 kg Max. Tool Length: 650 mm Max. Tool Diameter: 325 mm Workpiece Diameter At Full Load: 100 mm Lsdpfexvw Etsx Afljai Tool Taper: HSK - 100 Spindle Speed: RPM Rapid Traverse: 60 m / min Machine length: 9500 mm Machine width: 4500 mm Machine Height: 3500 mm Further information: Coolant system = 1250 l

Condition: excellent (used), Year of construction: 2003, operating hours: 18,847 h, functionality: fully functional, machine/vehicle number: nº Serie 1151, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Trevisan DS200 is a Machining Center featuring an integrated turning device (U-axis/facing head), enabling turning with the workpiece stationary and the tool rotating (cylindrical, conical, spherical, threading, facing) and, within the same setup, milling, drilling, and reaming with the main spindle. It is equipped with two independent spindles (milling head + U-axis facing head) and automatic tool change, thus functioning as a combined "lathe + machining center" in a single unit, reducing cycle times and errors due to re-clamping. Typical Architecture of the DS200 Series • Structure: bed and columns made of high-rigidity cast iron. • Contouring head (U-axis): various diameters with a radial travel of 70 mm, multi-tool tool holder, and constant surface speed for high-quality turning with the workpiece stationary. • Table/palletization: 1 pallet with a table size of 1200x600 mm. • Capacities: up to Ø350 mm. Focus on the Trevisan DS200/70 The DS200/70 belongs to the "Small/Compact" family, designed for medium-sized parts requiring precision turning and milling/drilling operations in a single setup. According to Trevisan nomenclature, “200/70” indicates a facing head diameter of 200 mm with U-axis travel of 70 mm. Indicative Configuration and Capabilities Lajdpfx Afjxrb Ukolsi • Type: Trevisan DS200 turning-milling center • Facing/contouring head (U-axis): Ø ≈ 200 mm, U-axis travel ≈ 70 mm, suitable for cylindrical, conical, spherical, threading, facing operations with the workpiece fixed. • Basic travels (DS200/70 class): X ≈ 520 mm. • Single-setup processes: turning (fixed workpiece) + milling/boring with main spindle → reduced cycle time and improved coaxiality between turned and machined surfaces. Typical Use Cases • Valve bodies, covers, flanges, and pump components where turned internal/external profiles (spherical, conical) and multiple precision drilling/milling operations are required.

Condition: used, Year of construction: 2007, Technical details: x-travel: 1100 mm y-travel: 900 mm z-travel: 1250 mm b-axis: 360 000 x 0,001 ° milling head speed: 1 - 10000 U/min spindle taper: ISO: 50 Lajdexp Hgtepfx Aflsi rapid traverse: 60 m/min pallet size:: 630 x 630 total power requirement: 37 kW weight of the machine ca.: 25 t with CNC control SIEMENS 840 D autom. toolchanger 165 pockets twin pallets 630 x 630 mm max. pallet load 1500 kg through spindle coolant chip conveyor and coolant attachment make KNOLL *

Condition: used, Year of construction: 2001, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 660 mm, controller manufacturer: Mazatrol, controller model: Fusion 640 M, total height: 3,050 mm, total length: 7,109 mm, total width: 7,805 mm, table width: 500 mm, table length: 500 mm, table load: 500 kg, rotational speed (min.): 35 rpm, rotational speed (max.): 15,000 rpm, overall weight: 11,600 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 15,000 rpm, Horizontal Machining Centre with Palletech CNC Control Mazatrol Fusion 640M Pallet table size 500 x 500 mm Number of pallets 10x Table load 500 kg Movement X-axis 710 mm Movement Y-axis 610 mm Movement Z-axis 660 mm Table indexing 360 x 1° Spindle Taper DIN 69871A Spindle speed 35 - 15.000 R/min Laedjxnmgdopfx Aflji Magazin capacity 120 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2004, travel distance X-axis: 1,000 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Okuma, controller model: OSP-E100M, total height: 3,280 mm, total length: 6,500 mm, total width: 3,460 mm, table width: 630 mm, table height: 630 mm, spindle speed (min.): 12,000 rpm, power: 37 kW (50.31 HP), Okuma MA-600 HB Space Center OSP E 100M control Dimensions pallet 630 x 630 mm Number of pallets 2x X-axis travel 1000 mm Y-axis travel: 950 mm Z-axis travel 1000 mm Laodpfxsxnkvie Aflsi Indexing of table 1° Spindle holder MAS BT 50 Spindle speed 12,000 rpm Spindle motor 37/26 kW Positions in the tool magazine 60 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements width 4210 Measurements depth 6900 mm Measurements height 3400 mm Machine weight 21500 kg Control Unit Brand MAZATROL Model SMOOTH G Laodpfxexmlkxj Aflei Main Drive Spindle speed range 10000 Number of axis 4 Movement X-Axis Movement 1050 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 900 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 980 mm Z-Axis Rapid Traverse 60 m/min Workpiece Workpiece X 1050 mm Workpiece Y 1300 mm Table Min distance between vertical spindle and table 100 mm Max distance between vertical spindle and table º1000 mm Table load 1500 kg Tools Max weight 30 kg Max tool diameter 125 (250) mm Max tool length 630 mm Additional Equipment Chip Conveyor Tool Presetting Air Blow on the Spindle Remote Handwheel This 4-axis Mazak HCN-6800 horizontal machining center was manufactured in 2016. Ideal for precision machining, it offers robust construction and reliability. Consider the opportunity to buy this Mazak HCN-6800 horizontal machining center. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2019, General Data Measurements height 3280 mm Machine weight 24000 kg Main Drive Spindle speed range 12000 Number of axis 4 Movement X-Axis Movement 1000 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 900 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 1000 mm Z-Axis Rapid Traverse 60 m/min Table Table load 1200 kg Tools Number of station 171 Type of tool holder HSK 100 This 4-axis Okuma MA 600H II was manufactured in 2019. It features a 630 × 630 mm table, capable of handling loads up to 1,200 kg, and a high-speed spindle up to 12,000 rpm. The machine offers rapid traverse rates of 60 m/min and a comprehensive tool magazine with 171 stations. If you are looking to get high-quality milling capabilities consider the Okuma MA 600H II machine we have for sale. Contact us for more information. Ledpoxmbxljfx Afljai Application Types Milling

Condition: ready for operation (used), Year of construction: 2019, General Data Measurements height 3280 mm Machine weight 24000 kg Main Drive Spindle speed range 12000 Tool taper HSK 100 Lajdjxmbxxjpfx Aflsi Number of axis 4 Movement X-Axis Movement 1000 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 900 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 1000 mm Z-Axis Rapid Traverse 60 m/min Table Table load 1200 kg This 4-axis Okuma MA 600H II was manufactured in 2019, featuring a robust 630 × 630 mm table, capable of handling loads up to 1,200 kg. It boasts rapid traverse rates of 60 m/min and a high-speed spindle up to 12,000 rpm, ensuring efficient machining. The machine includes a large tool magazine with 171 stations and advanced features like spindle cooling and a chip conveyor system. If you are looking to get high-quality milling capabilities consider the Okuma MA 600H II machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 0093, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 810 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 20 mm, feed length Y-axis: 20 mm, feed length Z-axis: 20 mm, controller model: OSP7000M, workpiece diameter (max.): 1,000 mm, workpiece weight (max.): 1,200 kg, table width: 630 mm, spindle motor power: 28,000 W, spindle nose: BT50, number of spindles: 1, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 240 mm, tool weight: 25 g, input voltage: 200 V, type of input current: three-phase, Equipment: chip conveyor, For sale: OKUMA MX-60HB horizontal machining centre from 1997 in good condition, ideal for precision machining operations. This robust and reliable machine has been regularly maintained and is ready to be integrated into your workshop. Key features: Brand: OKUMA Model: MX-60HB Year: 1997 Type: Horizontal Machining Centre CNC Control: OKUMA OSP 7000 Capacity: Table: 630 x 630 mm Travel (X/Y/Z): 1000 / 800 / 810 mm Table load capacity: 1200 kg Spindle: Speed: 50 - 8000 rpm Power: 22 kW Tool changer: 60 tools (BT50) Machine weight: approx. 14,000 kg Included accessories: Cooling system Knoll HP 60Bar pump Chip conveyor Technical documentation Condition: Machine in good general condition Regular maintenance performed Ljdpfoxg Rfhjx Afljai Available for inspection and testing by appointment Sold as-is, excluding transport and installation costs.

Condition: used, Year of construction: 2008, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Siemens 840D powerline spindle tunring speed 8.000 U/min drive capacity - main spindle 100/40% ED 32/44 kW tool taper HSK-A 100 number of tool places 354 Pos. rapid traverse ( x / y / z ) 60 m/min size of pallet 800 x 800 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features: - NC rotary table with pallet carrier - Rotary pallet changer - 40 bar internal coolant supply Lasdpfx Afsxcp R Uslei - Rotating viewing window - Wall-mounted magazine with 300 magazine positions - Rotating wall tool lock, 30 positions (inactive) and 54 positions (active) - Infrared measuring probe - SK 50 mechanical tool breakage detector - Tool identification - 4-color signal lamp Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2002, Technical details: x-travel: 1000 mm y-travel: 800 mm z-travel: 1100 mm weight of the machine ca.: 20 t dimensions of the machine ca.: 6,80 x 3,0 x 3,20 m Tool bore: SK50 Tool taper: HSK-A 100 turning speed range: 45-6.000 U/min Lsdjw T Tntjpfx Afljai size of pallet: 630x800 mm change time of pallets: 21 sec Mechanical processing of cylinder heads and cylinder crankcases Machines have been in single-shift operation since 2013 Service and maintenance intervals were adhered to *

Condition: good (used), Year of construction: 2009, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, table width: 800 mm, table length: 800 mm, Year of manufacture: 2007 and 2009 XYZ travel: 1250 x 1000 x 1000 mm B axis: 360 x 1 degree Pallet size: 800 x 800 mm Tool holder: SK 50 Spindle speed: 6000 rpm Magazine: 60 positions IKZ (internal coolant supply) Technical machine data: - Maximum workpiece height: 1200 mm - Number of magazine positions: 60 - Tool holder: A50, DIN 69871 B, max. tool length: 550 mm - Max. tool diameter: 250 mm / with free adjacent space, max. tool weight: 25 kg - Macro package - Tool offsets: 200 - Fanuc 18 - Extractor Laodpfx Ajw Rd S Roflji - Hinged belt chip conveyor - Machines have 20,000 and 25,000 cutting hours - Number of pallets: 2 - Weight: 21,000 kg

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 825 mm, workpiece weight (max.): 1,500 kg, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 1,050 mm Travel Y-axis: 800 mm Travel Z-axis: 825 mm C-axis indexing: 1° Table Clamping area front-to-back: 630 mm Clamping area diameter: 630 mm Workpiece weight: max. 1,500 kg Spindle / Head Speed range: up to 10,000 rpm Drive power: 30 kW Tool magazine Magazine type: chain magazine Number of tool positions: 160 Workpiece automation Storage type: pallet changer Number of storage slots: 6 Control system Type of control: CNC Control model: Mazatrol MACHINE DETAILS Electrical connection data Connection voltage: 400 V Lodpfxjwztlve Afljai Line frequency: 50 Hz Dimensions & weight Space requirement left/right: 6,770 mm Space requirement front/back: 3,830 mm Total height: 3,225 mm Total weight: approx. 17,000 kg EQUIPMENT Chip conveyor Internal coolant supply Fully enclosed work area High-pressure pump The machine will be provided partially disassembled, ready at floor level.