Josef Brucker Maschinenbau

Condition: like new (used), functionality: fully functional, Kitagawa B-210 3-jaw chuck as new Shipping by parcel service is possible if costs are covered. Fgodpfx Aoxl Dmvjfpjh

Condition: ready for operation (used), Diameter: 250 mm Fgjdpfx Afjxlg I Njpoh Bore: 75 mm Height: 80 mm Total height incl. mounting plate: 120 mm

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck Fgedjxd Uq Aspfx Afpjh -Manufacturer: VEB, three-jaw chuck chuck size Ø 110 mm -Type: DH 110x3 -Passage: Ø 25 mm -Bolt circle: Ø 134 mm -Dimensions: Ø170 x 155 mm -Weight: 9.2 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws Fgsdpexdm D Ijfx Afpsh -Interchangeable jaws: 3-piece hard top jaw set -Width: 40 mm -Dimensions total: 107/120/H55 mm -Total weight: 3.2 kg

Condition: good (used), Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck Fgodpfxsxdkmyo Afpsh -Manufacturer: Forkardt, wedge bar chuck type F 400 -Chuck size: Ø 400 mm -Bolt circle: Ø 235 mm -Adapter: Short taper 11 / cone 192 - 196 mm -Through hole: 111 mm -Dimensions: Ø 400 x 325 mm -Total weight: 138 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws Fgjdpfx Asxdiz Nofpeh -Top jaws: Jaw set for three-jaw lathe chuck -Jaw width: 26 mm -Dimensions: see photo technical drawing -Number: 1 set of interchangeable jaws available -Dimensions total: 110/79/H66 mm -Total weight: 2.9 kg/set

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: jaw set for three-jaw lathe chuck -Jaw width: 21 mm -Dimensions: see photo technical drawing -Dimensions total: 78/63/H56 mm Fodjxdivtepfx Afpjgh -Total weight: 1.3 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: jaw set for three-jaw lathe chuck -Jaw width: 24 mm Fgsdpfexdiu Ajx Afpjh -Dimensions: see photo technical drawing -Dimensions total: 90/72/H67 mm -Total weight: 2.2 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks Fedpfxjxdip He Afpogh -Top jaws: hard top jaws for key bar chucks, helical toothed -Jaw width: 26 mm -Dimensions: see photo technical drawing -Dimensions total: 115/78/H70 mm -Total weight: 3.2 kg

Condition: good (used), Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Key bar chuck: without clamping jaws -Chuck size: Ø 290 mm -Bolt circle: 170 x 21 mm -Through hole: 80 mm -Dimensions total: Ø 290 x 91 mm -Weight: 33.4 kg Fgodpfx Afexc Hfpopoh

Condition: good (used), 4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Power chuck: chuck size Ø 215 mm -Passage: Ø 34 mm -Hole: Short cone 6 cone Ø 103-106 mm -Thread: M40 Fedsxc Hcnepfx Afpjgh -Bolt circle: Ø 133 mm -Dimensions: Ø 215 x 195 mm -Weight: 23.7 kg

Condition: ready for operation (used), Outer Ø: 165 mm Fgjdpfx Asxb A Nnofpeh Bore: 45 mm Total height: 85 mm Short taper mount: with 4 studs M 10

Condition: excellent (used), Outer Ø: 200 mm Bore: 52 mm Max. speed: 4500 rpm Fodpfoxazt Aex Afpsgh

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws Fedpow U Aq Hefx Afpegh -Interchangeable jaws: 3-piece soft top jaw set -Width: 20 mm -Dimensions total: 84/63/H38 mm -Total weight: 1.1 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: Jaw set for three-jaw lathe chuck, hard Fgedjw U Ad Tspfx Afpsh -Jaw width: 20 mm -Dimensions: see photo technical drawing -Dimensions total: 90/80/H70 mm -Total weight: 1.9 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: 3 sets of top jaws for key bar chucks, helical toothed -Jaw width: 45 mm -Dimensions: see photo technical drawing Fodpfx Aew U Adaefpsgh -Transport dimensions: 420/220/H130 mm -Total weight: 40.8 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks Fedpfsw U Abrox Afpegh -Top jaws: 8 sets of soft top jaws for key bar chucks, helical toothed -Jaw width: 32 mm -Dimensions: see photo technical drawing -Transport dimensions: 470/310/H90 mm -Total weight: 47 kg

Condition: ready for operation (used), 6 jaws self-centering lathe chuck D1600 Fgsdpfsw Uqnmsx Afpsh 6 jaws 4 jaws 3 jaws 2 jaws

Condition: good (used), functionality: fully functional, used (as new) 3-jaw chuck RÖHM D = 160 mm Mount MK 4 and Fgjdpfsw Im Txex Afpeh 3-jaw chuck FORKARDT D = 160 mm Mount MK 5

Condition: excellent (used), functionality: fully functional, We offer 2 pieces of roller conveyors Adjustable height-suitable for any machine Roller width : 40cm Length first piece : 200cm Length second piece 180 ccm Fsdpew Ihgmjfx Afpogh Price for both 400 EUR Price for one piece 200 EUR

Condition: excellent (used), functionality: fully functional, chuck outer diameter: 400 mm, bolt circle diameter: 235 mm, cone mount: 196 mm, cone diameter: 196 mm, through hole: 110 mm, SMW HG 400 SMW AUTOBLOCK Excellent condition. Ø 400 x Ø 110 Comes with approx. 50 sets of three-jaw chucks. Adapter for DIN 55026 Cone diameter: 196.883 mm. Bolt circle: 6 x 235 mm. Transport can be arranged. Fjdpfsw Hwu Sox Afpogh

Condition: excellent (used), 3-jaw CNC power chuck, e.g. for a HYUNDAI-KIA SKT 100 M Diameter: 150 mm Spindle mount: A 2-5 Speed range: max. 6,000 rpm Through bore: 42.5 mm Fedpfxow Elp Ie Afpegh Weight: 8 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), 3 sets of used soft one-piece clamping jaws for 3-jaw spiral chuck BISON 630 Fsdpfjwz Ikmsx Afpogh Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Stock No. 80118 Technical Data: - Chuck diameter: 600 mm - Through-hole approx.: 130 mm - Overall depth without jaws: 160 mm - Overall depth with jaws: 240 mm - Jaw dimensions: 210 x 45 x 115 mm - Weight approx.: 190 kg - 1 set of jaws Fgedpfjwy Uz Nox Afpoh - Chuck key

Condition: good (used), 3-jaw power chuck Stock number: Manufacturer: unknown Diameter: 250 mm Mounting: Threaded Fedpswy Hl Tofx Afpegh Attachment: 3 bolts, bolt circle 225 mm Distance 195 mm Spigot: 200 mm Bore: 55 mm Height: 130 / 185 mm Accessories: Interchangeable jaws Weight: 36 kg