Möller Handelsvertretungen für Lager- u. Betriebseinrichtungen

Condition: excellent (used), functionality: fully functional, Internal article number: 26073 Universal milling machine Deckel FP2 + Heidenhain digital display + Swiveling table Travel ranges: X450 / Y230 / Z400 mm Spindle speed range: 40-2000 rpm Tool holder: SK40 The machine comes from an educational institution and is in well-maintained condition. Podpfx Aszd Twusnpopu You are welcome to inspect the machine while it is powered on, in our over 500 m² heated storage area.

Condition: excellent (used), functionality: fully functional, Internal article number: 26072 Universal milling machine Pedpfezd Ttiex Anpspu Deckel FP2 + Heidenhain digital display Travel ranges: X450 / Y230 / Z400 mm Spindle speed range: 40-2000 rpm Tool holder: SK40 This machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is powered on, in our heated warehouse covering an area of over 500 m².

Condition: reconditioned (used), Tool milling machine: Deckel Type: FP 2 Condition: Geometrically overhauled, used Year of manufacture: 1980s, geometric overhaul in 2026 Technical data: Travel distances X/Y/Z, approx.: 400 / 200 / 400 mm Tool holder: S20 Spindle speeds: (18) 40 - 2000 rpm Feeds: (18) 8 - 400 mm/min Head swivels: 180° Equipment: - 3-axis digital display, new - Spindle protection device with limit switch, new - Machine light, new - Horizontal and vertical spindle Ppedpfezcdarox Anpju - Fixed angle table - Coolant system - Chip tray

Condition: good (used), Year of construction: 1975, Deckel FP2 FPS retrofitted tool milling machine with a 3-axis Heidenhain digital display. The machine is in good condition and comes from a training department. It features a fixed table, electrically interlocked milling head guard, and an SK 40 spindle mount. Accessories include various collets and milling arbors. It is in good, operational condition. A demonstration under power can be arranged. Ppsdpfx Aszac Sbenpju

Condition: used, x-travel 1550 mm y-travel 400 mm z-travel 500 mm table-size 1850 x 350 mm spindle taper ISO Sk 50 spindle turning speed range 40 - 1800 U/min total power requirement 7,5 KW weight of the machine ca. 2,8 t Ppodpfx Aey Umbqonpju dimensions 2,4 x 2,2 x 2,1 m Universal Milling Machine - 3-axis digital readout - Central lubrication system - Coolant system - Machine lamp - Machine leveling feet - Chip guard - Emergency stop device - Mobile workbench incl. tools

Condition: used, Year of construction: 1992, functionality: fully functional, Vertical and Horizontal Milling Machine Manufacturer: EUMEGA, Type: MDV5 Year of Manufacture: 1992 Technical Data: Manufacturer: Eumega Ppodpfey Tk R Tsx Anpju Type: MDV5 Year of Manufacture: 1992 Table Size: approx. 305 x 1270 mm X-axis Travel: approx. 460 mm Y-axis Travel: approx. 500 mm Z-axis Travel: approx. 610 mm Spindle Speed: variable Tool Holder: SK 40 Total Power: 3.75 kW Dimensions (L x W x H): L 2000 x W 2,000 x H 2600 mm Weight: approx. 3 t All information is without guarantee. A demonstration can be arranged at any time in our showroom.

Condition: repair required (used), functionality: limited functionality, Offered for sale is a Maho 700 milling machine. Visually and technically in good condition. Includes digital readouts for the X, Y, and Z axes. Comes with a machine vise (as shown in the photos). It was used by us for apprentice training. The machine is being sold as in need of repair. Feed in the X and Y axes functions perfectly. The feed in the Z-minus direction also works. Only in Z-plus (raising) does it stick a little. However, this should be fixable with maintenance. The machine can be inspected under power in 45659 Recklinghausen. Pedpfxjy Rxvlo Anpjpu

Condition: used, Year of construction: 2002, x-travel 600 mm y-travel 400 mm z-travel 400 mm table-size 800 x 400 mm spindle taper ISO Sk 40 spindle turning speed range 10 - 3150 U/min total power requirement 12,0 kVA weight of the machine ca. 2,2 t dimensions 2,0 x 1,85 x 1,95 m CNC Universal Milling Machine - Heidenhain TNC 310 with handwheel - Hydraulic tool clamp - Central lubrication - Coolant system - Machine light Pedpfx Asy N D Idenpspu - Machine feet - Enclosure

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 25 rpm, year of last overhaul: 2026, Equipment: documentation/manual, Dear Sir or Madam, We are offering a partially overhauled Deckel FP2 for sale. This newer model stands out particularly due to its stepless speed control, which makes operation very easy and extremely comfortable. The machine has undergone an extensive partial overhaul in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. --- Currently 3 units available for immediate delivery! --- Availability: 3x immediately Machine no.: 2202-xxxx Table: fixed angular table or rotary-tilt-swivel table Ppsdpfxsy Exayj Anpeu Travel distances: X 400mm / Y 220mm / Z 400mm Drive power: 3kW Number of spindle speeds: 16 Speed range: 25-2500 rpm Tool holder: SK40 Drawbar thread: S20x2 Feed: stepless Equipment and accessories: Heidenhain 3-axis digital readout, stepless feed regulation on all 3 axes, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - On request, we can fully or partially overhaul your selected machine - If desired, you can order additional accessories such as tools, etc. directly - If required, we can directly install further equipment such as safety devices - We are happy to arrange shipping and/or installation for you

Condition: used, Year of construction: 1992, functionality: fully functional, Universal machine - Tool milling machine and lathe. Table 290 x 900 mm Psdpfx Anjy D Rdhspjpu Table loading 80 kg Spindle revolutions ... 56 - 4500 rpm Lathe - working diameter 200 mm Lathe - working length 800 mm Machine weight 1700 kg

Condition: excellent (used), Year of construction: 1976, functionality: fully functional, Deckel FP1 FPS retrofitted tool milling machine with 3-axis Heidenhain digital readout. The machine is in very good condition and comes from a training department. Adjustable tilting table, SK 40 spindle taper. Accessories include various collets and arbor holders. In good, ready-to-use condition. Test run under power can be arranged by appointment. Pjdpsy Dz T Tefx Anpspu

Condition: used, functionality: fully functional, infinitely variable feeds 18 spindle speeds 35 - 2200 rpm Spindle taper ISO 40 Travel paths: X-axis 400 mm Y-axis 300 mm Z-axis 350 mm Spindle taper ISO 40 Weight approx. 1.5 t Podpfjy An Ihox Anpepu Required space (W x D x H): 1.4 x 1.7 x 1.9 m

Condition: excellent (used), Year of construction: 2007, operating hours: 7,576 h, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 255 mm, table length: 885 mm, table width: 320 mm, overall weight: 2,500 kg, table load: 250 kg, Fehlmann Picomax 55 CNC 2/3 Milling Machine The machine is fully functional and in very good technical condition. We purchased it a year ago from a company that owned it from new and always serviced it at the official Fehlmann service center. We are selling it solely because we do not have enough SF32 tool holders. Control: Heidenhain 530. The machine is equipped with a measuring probe. Axis travels: X: 500 mm Y: 255 mm Z (manual quill): 160 mm Z (programmable quill): 147 mm W axis: 500 mm Table surface: 885 x 320 mm Spindle speed range: 50 – 9,000 rpm Tool holder: SF32 Table load: max. 250 kg Spindle power (S6, 40%): 9.9 kW Machine weight: approx. 2,500 kg Ppsdpfx Aoyzt Abonpou Dimensions (L x W x H): 1,900 x 1,900 x 2,300 mm The machine is in very good condition and the spindle has less than 10,000 operating hours.

Condition: used, Universal Tool Milling Machine MAHO Type MH 600 P Machine No. 61742 Year of manufacture: approx. 1982 Travel (X) table cross movement: 500 mm Travel (Z) head movement: 400 mm Travel (Y) vertical movement: 370 mm Table size: 720 x 410 mm Spindle taper: SK 40 Spindle speed: 40 - 2000 rpm, 18 steps Feeds X, Y and Z: 5 - 500 mm/min, stepless Rapid traverse X and Z: 1.2 m/min Rapid traverse Y: 0.8 m/min Quill travel horizontal: 80 mm Quill travel at vertical head: 80 mm Distance spindle nose to table: max. 370 mm Spindle drive motor power: 4 kW Electrical connection: 380 Volt, 50 Hz - Digital display with HEIDENHAIN TNC 131 positioning control - Vertical milling head swivels +/- 90° - Hydromechanical tool clamping - Universal swivel-tilt rotary table - Hydromechanical clamping for table rotary motion - Table rotation with direct and indirect indexing and indexing disc feature (hand crank with locking pin missing) - Table rotation worm gear ratio 1:120 - Automatic central lubrication - Control cabinet fixed to machine - Coolant system integrated in machine base Ppsdpfx Anoyy Df Dopju - Machine lamp - Operating manual and circuit diagram Required space (L x W x H): 1800 x 1800 x 1900 mm Weight: 1650 kg Very good condition

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-axis Heidenhain ND780 Digital Readout, special finish in light grey!!! Technical Data: >> Year of manufacture: 1986 Machine No. 2203-2126 >> Fixed angle table (newly planed) >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min Ppsdpfx Aoylmh Donpeu >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head on spindle support adjustable by 150 mm >> Vertical and horizontal quill – SK40 >> Vertical quill extendable by 90 mm >> Pull stud system: M16 >> Weight approx. 1,500 kg Accessories and Features: >> 3-axis digital readout Heidenhain ND780 >> Coolant system >> Chip tray >> Central lubrication About the machine: Offered is a Deckel FP4M universal milling machine in very good condition. The machine has been partially overhauled, with minimal backlash and all leadscrews move smoothly and evenly. The milling machine runs quietly even at maximum speeds. Rapid traverse is available on all axes and all bellows are new. The fixed angle table has been newly scraped. A reliable and user-friendly machine. Oil change carried out. Mechanically and electrically tested. The Heidenhain digital readout makes working easier and even more precise. Take the opportunity to view and test the machine under power at our facility. For an additional charge, the machine can be supplied in CE-compliant configuration.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 2836-0192, Machine in good used condition, Dialog 11 control. Until recently, it was only rarely in operation in our own workshop. Documentation/manuals etc. are available. Additional accessories, cutters, zero point probes, etc. can be purchased optionally. Ppodpoylawxofx Anpou

Condition: ready for operation (used), DECKEL FP 2 Tool Milling Machine from Educational Facility - Well-maintained original condition - Travel paths X/Y/Z 400x200x400mm - 3-axis digital readout "NEW" - Swivel table – clamping surface 700x350mm - Speed range: 40 - 2000 rpm - Automatic feeds/rapid traverse on all three axes - Tool holder ISO 40 Ppedpfxjx Hyuhe Anpou - Vertical/horizontal milling attachment - Vertical head swivels and features a quill for drilling - Coolant system - X-AXIS leadscrew nut "NEW" - Machine feet - Various tool holders - Chip guard - Machine base - Documentation Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight: 1500kg Errors and omissions excepted.

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 25 rpm, year of last overhaul: 2026, Dear Sir or Madam, We are offering for sale a Deckel FP2 Aktiv. This newer model is particularly notable for its infinitely variable spindle speed control with Heidenhain Aktiv control, making operation both very simple and extremely comfortable. The machine has undergone extensive partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on site. Delivery time: on request Machine number: 2202-xxxx Table: Rigid angle table or rotary-tilting-swiveling table Travel (X/Y/Z): 400mm / 220mm / 400mm Drive power: 3 kW Number of spindle speeds: 16 Speed range: 25-2500 rpm Tool holder: SK40 Drawbar system: S20x2 Feed: Infinitely variable Equipment and accessories: 3-axis Heidenhain digital readout, stepless feed adjustment on all 3 axes, Heidenhain digital readout with Aktiv control, coolant system, central lubrication, technical documentation, machine leveling feet, safety devices (optional) Our service promise to you: Ppedpfox Hr Dzex Anpju - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - On request, we can fully or partially overhaul the selected machine for you - If desired, you can order further accessories such as tools, etc. directly - If desired, we can install additional equipment such as safety devices, etc. directly - We are also happy to handle shipping and/or installation for you

Condition: used, Universal Tool Milling Machine WEMAS - MAKOSON Type WM 2 Year of manufacture: 1992 Travel ranges X: 480 mm, Y: 350 mm, Z: 250 mm Table size: 800 x 400 mm Spindle taper: ISO 40 Quill vertical travel: 80 mm Spindle speed: 35 to 4000 rpm, 3 steps Feed X, Y, and Z: 1 to 850 mm/min, stepless Rapid traverse X, Y, and Z: 1 m/min Spindle drive: approx. 3 kW ?? Electrical connection: 400 Volt, 50 Hz - Swiveling control panel with HEIDENHAIN digital readout, type Positip 850 - Spindle speed via 3 gearbox stages and stepless adjustment via frequency converter - Conventional handwheels for X, Y, Z - Vertical milling head with drilling quill swiveling +/- 90° - Manual tool clamping with M16 thread - Manual central lubrication Pedpfsx Hkd Tjx Anpspu - Coolant system integrated in machine base - Control cabinet fixed to the machine - Fixed angle table Space requirement L x W x H: 1900 x 1700 x 1820 mm Weight: approx. 2000 kg In good condition

Condition: like new (used), Year of construction: 1985, functionality: fully functional, travel distance X-axis: 580 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, rotational speed (max.): 4,000 rpm, controller model: Contour 1, NC Milling Machine Deckel FP4A We are offering for sale a perfectly maintained Deckel FP4A CNC milling machine (very low operating hours, in as-new condition)! Technical Details: - Travel (X): 580 mm Ppjdpfx Ajxzpwfenpju - Travel (Y): 400 mm - Travel (Z): 450 mm (390 mm*) - Table size: 460 x 800 mm - Spindle speed range: 40 – 4000 rpm - Feed rate: 2 – 3600 mm/min - Rapid traverse: 4.0 m/min - Spindle taper: SK 40 - Machine dimensions (LxWxH): approx. 3.0 x 2.10 x 2.10 m - Spindle drive power: 4.0 kW - Control: Contour 1 Description: CNC-controlled tool milling machine, equipped with Contour 2 control. Features include a vertical head rotatable +/- 90° with quill travel of 80 mm, horizontal spindle, power feeds & rapid traverse on all 3 axes, hydraulic tool clamping, flying desk, electronic handwheel, automatic central lubrication, coolant system, safety emergency stop, chip tray, and separate electrical cabinet. The machine is in top working condition. Note: This additional information is standard for this model. Please always verify the exact configuration during inspection. The DECKEL FP4A Universal Tool Milling Machine, built in 1985, is a classic and highly versatile metalworking machine renowned for its precision and flexibility – testament to Deckel’s strong tradition of engineering quality. The FP4A features a robust bed-type construction, delivering the necessary stability for precise milling tasks. Its universal tool milling head is a highlight, enabling a wide spectrum of operations—from basic drilling to complex contouring and profiling. This versatility makes it a valuable asset in tool and die manufacturing, as well as mold making. Key technical features of the 1985 DECKEL FP4A include a generously sized worktable, infinitely variable spindle speed adjustment, and an intuitive control interface for efficient programming and machine operation. The advanced CNC technology contributes to exceptional accuracy and operator convenience. Despite its age, the DECKEL FP4A continues to be a trusted solution for applications requiring flexible tool milling. Its reputation for reliability and precision makes it an essential tool for modern metalworking and manufacturing operations. Deckel’s legacy of quality and innovation in the field of metal machining is clearly evident in this model.

Condition: used, x-travel 400 mm y-travel 400 mm z-travel 300 mm rapid traverse 1,2 m/min feed range 5 - 500 mm/min creep feed 1:100 tool taper ISO 40 stroke v60 h70 mm table - universal ca. 620 x 320 mm table vertical adjustable 350 mm Pedjxv D Uzepfx Anpspu weight of the machine ca. 1200 kg Machine was used in a public facility and is in good condition. Machine can be viewed under power by prior appointment

Condition: good (used), Year of construction: 1976, Deckel FP3 tool milling machine with 3-axis Heidenhain digital readout, adjustable angle table, SK 40 spindle taper. Accessories: various collets and arbor holders, counter support. Good, operational condition. Can be demonstrated under power by arrangement. Podpfxexu Uvts Anpepu

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, Universal Milling Machine Deckel FP2 with 3-Axis Digital Readout Heidenhain, infinitely variable feed, in very good condition Technical Data: >> Year of manufacture: 1978 Machine No.: 2202-10163 >> Fixed angle table >> Spindle speeds: 25 - 2500 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 3.0 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head can be shifted 150 mm on spindle carrier >> Vertical and horizontal quill - SK40, extendable >> Drawbar system S20x2 >> Weight approx. 1400 kg Accessories and Equipment: >> 3-axis digital readout from Heidenhain Psdpfx Aexghtvsnpepu >> Coolant system >> Mechanical central lubrication About the machine: Offered here is a Deckel FP2 universal milling machine in very good condition. The FP2 has very little backlash, and all spindles move smoothly. The machine runs quietly even at maximum speeds. On this newer FP2 model, the feed rate is infinitely adjustable on all three axes, and each axis is equipped with a rapid traverse. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and improves precision. You are welcome to view and test the machine under power at our facility.

Condition: used, Year of construction: 2006, x-travel 560 mm y-travel 300 mm z-travel 420 mm table-size 1055 x 240 mm spindle taper ISO Sk 40 spindle turning speed range 40 - 1550 U/min total power requirement 5,5 kW weight of the machine ca. 1,3 t Ppsdpfx Aoxfb Htenpsu dimensions 1,6 x 1,5 x 1,85 m Universal milling machine - Digital display - Chip guard - Coolant system - Machine light - Chip tray

Condition: good (used), Year of construction: 1980, Deckel FP3 tool milling machine with 3-axis Heidenhain digital readout, fixed table, SK 40 spindle taper, accessories: various collets and milling arbors, counterholder. Good operational condition. Can be demonstrated under power by appointment. Ppedpfxoxdr Uxj Anpou