Adolf Scheibe

Condition: used, Dust cyclone with rotary valve, dust cyclone 14,400 m³/h,Cyclone system, used machine Year: 2013 Dust Cyclone: HLZ-J 1600 Airflow rate: 14,000 Bm³/h Inlet (suction side): 400 mm Hnodpfxjx U Amie Ahueg Height: 5,853 mm Diameter: 1,695 mm Centrifugal Fan: Ventilatorenfabrik Oelde GmbH Type: HRV 56N-400/M GL360 Airflow rate: 14,400 m³/h Rated power: 22 kW Rotary Valve: Ventilatorenfabrik Oelde GmbH Type: MS 050-390 A Capacity per revolution: 58 liters Rotor with 10 fixed rotor blades (cells)

Condition: new, CATALOGUE NUMBER HZ017 PRODUCT FEATURES As standard, they have mobile containers for sawdust, equipped with a pressure system that allows for tight connection of the container with the machine structure. Thanks to this, it is possible to achieve high negative pressures, without losses at individual connection points. Contaminants from the filter fall directly into hermetic containers with the possibility of quick unloading, which have a special suspension system and mobile wheels that allow for easy and quick transport and maneuvering. The 5.5 kW / 6500 m3/h negative pressure fan, at 2 800 Pa, operates on the principle of a turbine, and the soundproofed design of the fan allows for a significant reduction in the noise emitted during operation. The certified control cabinet allows for constant monitoring of the correctness of operation, thanks to the possibility of any location far from the machine. Standard with integrated fan control system and filter cloth cleaning system ADVANTAGES - new machine - CE certificate - high efficiency - professional Scope of delivery: Polyester filter, 5 microns 2 Containers Drive system Filter cleaning using a vibration system with control TECHNICAL DATA extraction efficiency approx. 8900m3/h engine power 7.5kW rotational speed 3000 rpm voltage 400V, 50Hz extraction nozzle 300mm filter surface 20m2 extraction speed 28m/sec number of filters 45 negative pressure 2800 Pa filter category G filter material polyester dimensions length / width / height 921x2342x2304mm weight 500kg Net price: PLN 18,500 Net price: EUR 4,400 Hnedpfsx Ux E Iox Ahuog Net price calculated according to the exchange rate of PLN 4.2/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: used, Year of construction: 2017, Used unit Year of manufacture: 2017 Extraction side: right Test mark: H 3 Nominal airflow: 3534 m³/h Max. negative pressure: 2750 Pa Connection diameter: 250 mm Filter area: 32 m² Dust class: "M", AWN 16 Motor power: 5.5 kW Filter regeneration: pneumatic With fire extinguisher as extinguishing device Sound pressure level: 70 dB(A) Incl. mounted switch cabinet Hodpfjx Twh Sex Ahujng Incl. forklift brackets Weight: 962 kg LxWxH: 3650x1540x2570 mm Availability: short-term Location: Flörsheim

Condition: ready for operation (used), Heavy duty cyclone extractor 11kw fan , automatic retarder , fine dust filter Hsdpfxjx N Hrfo Ahujng

Condition: used, functionality: fully functional, filter area: 50 m², nominal flow rate: 5,090 m³/h, noise level: 75 dB, extraction nozzle diameter: 300 mm, Technical data Hodjx H Stijpfx Ahuong Max. airflow 6000 m3/h Nominal airflow 20 m/s 5090 m3/h Nominal pressure 20 m/s At extraction speed 2680 Pa Extraction connection Ø 300 mm Cartridge filter - Filter surface 50 m2 Noise level 75 dB Chip container 2x250 l - With cartridge filter - With chip remover - With JET cleaning

Condition: new, Year of construction: 2022, functionality: fully functional, total width: 1,150 mm, total length: 2,275 mm, total height: 2,285 mm, noise level: 75 dB, extraction nozzle diameter: 300 mm, space requirement length: 2,640 mm, space requirement height: 2,985 mm, The Felder RL300 industrial extractor has been put up for sale due to the failure of the tender. Brand new, unopened packaging for 75% of the new price. Guaranteed, with commissioning Description: Air flow, max: 6000 m3/h Nominal air flow: 20m/sec, 5090 m3/h Vacuum: 450 Pa Filter surface: 50 m2 Extraction nozzle diameter: 300 mm Hnedpfxsx H Srro Ahueg Modern, bright, clean design Great and efficient performance Chipboard storage Cartridge filter JET cleaning Year of manufacture: 2022

Condition: used, Year of construction: 2022, Used dust extractor Year of manufacture: 2022 · Galvanized sheet steel construction · Space-saving due to compact design Hnjdpox H Dahefx Ahusg · Supplied in ready-to-operate condition · ATEX – pressure shock resistance, FSA tested · Low energy consumption with high performance due to clean air side high-performance fan with special impeller · Energy-saving motor, efficiency class IE4 · 4 large-capacity collection containers with insert bags · Collection volume: 495 l · High safety and long service life thanks to certified filter media with test certificate · Compressed air pulse cleaning ("jet" cleaning) with time-based control for filter surface regeneration · PLC control with display for 4 slide valves EPN 24V DC, 4 machine start contacts, and 1 start for external automatic switch-on (additional slide valve control available at extra charge) · Connection cable, 5 m long, with plug · Automatic fire suppression system with special extinguishing agent container (no connection to the water supply required) · ABC powder extinguishing agent is not suitable for metal or cooking fat/oil fires · Backdraft flap, type-tested · Designed according to DIN EN 16770 · Residual dust content in exhaust air below 0.1 mg/m³ · Passed GS-HM-03 "H3" test IE5 efficiency power pack Start-up slide valve control Z 16 Motor power: 11 kW with slide valve control Z 16 Nominal volumetric flow (Vnom): 6,927 m³/h at 20 m/sec Max. volumetric flow (Vmax): 8,000 m³/h Vacuum at Vnom: approx. 3,100 Pa Vacuum at Vmax: approx. 2,300 Pa Sound pressure level: < 73 dB(A) Extraction nozzle diameter: 350 mm Dimensions: 3,930 x 1,030 x 2,560 mm Weight: approx. 1,080 kg Availability: approx. end of January 2026 Location: NRW

Condition: new, Year of construction: 2025, Industrial Dust Extractor DCV5200E+ – Maximum Performance in a Compact Design The professional industrial dust extractor DCV5200E+ is designed for the most demanding work environments. This high-efficiency unit is intended for removing sawdust, dust, and chips from woodworking machines, ensuring consistent extraction performance throughout the entire production cycle. Thanks to its compact design and strong suction power, the central dust extractor works perfectly both as a standalone machine and as a part of a multi-point extraction system. Key Advantages of the Machine Automatic filter-shaking system – ensures uninterrupted performance without the need for manual maintenance. Stable, hardened construction – eliminates vibrations and noise, ensuring long-lasting durability. Dynamically balanced metal impeller – quiet operation and failure-free performance in continuous use. Hjdpfxsx Hh Iij Ahujng 200 mm suction port – optimized airflow and increased extraction efficiency. 18 polyester filters – effective filtration of particles down to 5 microns, with optional HEPA filters available. Hermetically sealed plastic containers – quick replacement and 99.99% system tightness. Construction and Technology The DCV5200E+ is based on a proven, modular design with high rigidity and resistance to deformation. Thanks to the high tightness of the suction system, the machine efficiently extracts air without energy loss – which is especially important during the heating season. The fan blades feature optimized geometry, ensuring low energy consumption while maintaining maximum airflow efficiency. Precision and Work Efficiency The 3 kW three-phase motor delivers up to 5200 m³/h capacity and a suction speed of 30 m/s. This configuration allows several woodworking machines to be connected simultaneously without a drop in efficiency. It is ideal as a central extractor in high-dust production lines. Applications The DCV5200E+ dust extractor is intended for professional use in woodworking shops, furniture factories, and CNC production lines. It works effectively with: panel and sliding table saws, sanders and edgebanders, band saws and table saws, milling machines and thicknessers. Standard Equipment 18 polyester filters (5 microns) metal impeller and impeller housing hermetically sealed plastic containers integrated filter cleaning system Optional Equipment HEPA filter for particles below 1 micron extraction hoses and system connectors fill-level sensors Technical Specifications Parameter Value Motor power S1 3 kW / 400 V, 50 Hz Motor speed 3000 rpm Extraction capacity 5200 m³/h Negative pressure 3000 Pa Noise level 80 dB Suction port diameter 200 mm Suction speed 30 m/s Number of filters 18 Filter material Polyester (5 microns) Filter surface area 10 m² Dimensions (L × W × H) 2441 × 940 × 2270 mm Weight 260 kg

Condition: used, Year of construction: 1999, Used machine Year of manufacture: 1999 Equipment and technical data: - Maximum volume flow: approx. 3,200 m³/h - Nominal volume flow: 1,750 m³/h - Negative pressure: approx. 1,120 Pa - Filter area: approx. 10 m² - Collection container: total volume approx. 400 liters - Extraction connection diameter: 160 mm - Motor power: 3.0 kW - Voltage: 3 × 400 V, 50 Hz - Phases: 3N - CE marking Dimensions: approx. 1,775 × 898 × 2,005 mm Weight: approx. 320 kg Availability: short-term Hnedex Enr Eepfx Ahueg Location: 63934 Röllbach

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Features and technical data: Hodpfsx Enrlex Ahuong - with manual filter shaking - with H 2 filter - extraction nozzle: 160 mm - motor: 2.2 kW - filter area: 11.5 m² - nominal air flow rate: 1,780 m³/h - minimum air flow rate: 1,450 m³/h Availability: short notice Location: 63934 Röllbach

Condition: excellent (used), Felder RL 250 Extraction Unit Capacity: 6200 m³/h Extraction port: 250 mm Chip container capacity: 500 L Fire extinguishing system with water connection Motor: 5.5 kW Weight: 750 kg Very good condition Hnedpex A Exujfx Ahueg

Condition: excellent (used), System is like a new, very high quality. Including: 5 inch tube 31m, 4 inch tube 40m and 3 inch tube 41m Lot of standard radius elbows for these 3 diameters, standard 90 degree ty's, standard reducing couplings, compression couplings, threaded inlet valves etc. Hsdpox Anthsfx Ahusng

Condition: new, functionality: fully functional, Year of construction: 2025, Advantages of DC Chip Extractors The purpose of the Vibra Motor shaking system is to ensure stable operating parameters and to monitor the proper functioning of the extractor. A heavy-duty design enhanced with a radial fan guarantees maximum vacuum efficiency. The extractor is intended for dry sawdust and wood chips. Thanks to the airtight construction, it is suitable for operation both outdoors and inside the facility. Adapted for operation in a positive-pressure system (fans work on the contaminated side of the dust collector) as well as in a negative-pressure system (fans work on the clean side of the dust collector). The sound-insulated design and specially shaped impeller blades contribute to quiet and efficient operation while minimizing electrical power consumption. A key advantage of the extractor is the use of flexible and durable seals in critical areas, improving the tightness of the entire system without heat loss at connection points. A multifunctional device with a modular system allowing any configuration of the extractor. Warm air recovery system. Control cabinet equipped with an intuitive control panel that allows monitoring of filter contamination levels. For filtering smaller particles, a filter such as HEPA should be used. It is forbidden to use this extractor in an explosive atmosphere. The extractor is not designed to work with wet material (e.g., wet sawdust). Industrial Chip and Sawdust Extractor DCV21750 Technical Specifications Motor Power: 25 HP / 400 V, 50 Hz Extraction Capacity: 21,750 m³/h Inlet/Outlet Diameter: 400 / 400 mm Hjdpfex Agpzsx Ahusng Suction Speed: 28 m/s Number of Filters: 2 × 48 Number of Waste Bags: 8 Dimensions (L × W × H): 4600 × 1700 × 3500 mm Weight: 1400 kg SPECIAL OFFER!!! LAST UNIT IN STOCK!

Condition: excellent (used), Year of construction: 2013, Mode of operation: continuous operation with intermittent pauses Type of current: three-phase AC Frequency [Hz]: 50 Power consumption [kW]: 4 Supply voltage [V]: 3 × 400 V Number of filter bags / filter cartridges: 18 / Plitex Filter material: polyester felt 973010, dust class M, d = 160 × 1503 mm Filter area [m²]: 73.8 (4.1 m² per filter cartridge) Weight [kg]: approx. 700 Filter cleaning: compressed-air pulse cleaning Compressed air connection: standard NW7 quick coupling  – compressed air must be dry and oil-free  – Maximum pressure: 8 bar, Nominal pressure: 6 bar Compressed air consumption: approx. 360 normal litres per cleaning cycle Ambient temperature [°C]: 5–40 Maximum sound pressure level [dB(A)]: less than 70 Conveyed medium: air with solid particles Minimum operating temperature [°C]: 5 Residual dust content [mg/m³]: < 0.2 Maximum operating temperature [°C]: 45 Hsdpfjxup Ausx Ahuong Type of solids: salt-containing dust up to 2 mm particle size Maximum Kst value [bar·m/s]: 200

Condition: ready for operation (used), Year of construction: 2018, operating hours: 18,000 h, functionality: fully functional, machine/vehicle number: 10866888, type of input current: three-phase, filter area: 1,087 m², volume flow: 37,000 m³/h, intake manifold diameter: 600 mm, nominal flow rate: 37,000 m³/h, overall weight: 5,850 kg, total width: 4,500 mm, total length: 6,500 mm, total height: 5,785 mm, input voltage: 380 V, noise level: 82 dB, compressed air connection: 6 bar, nominal power: 60 kW (81.58 HP), extraction nozzle diameter: 630 mm, suction capacity: 37,000 m³/h, input current: 55 A, input frequency: 50 Hz, space requirement width: 6,000 mm, space requirement length: 12,000 mm, space requirement height: 5,785 mm, sheet thickness aluminum (max.): 2 mm, inlet: 630 mm, control voltage: 380 V, Equipment: CE marking, Dust collector SCHUKO with Goldcone cartridge filter. 2 x 30 kW ventilators Still in use in our workshop in Brussels, BELGIUM, until we move to our new building in September 2026. Hnedpfsxuftvjx Ahueg Only available in September 2026.

Condition: new, Year of construction: 2022, Negative pressure deduster Hoecker-Polytechnik. LIKE NEW !! Hnjdpfxsxr Rk Uo Ahuog Technical data Normal volume flow rate 5100 m3/h Max volume flow rate 6000 m3/h Negative pressure at rated V 2700 Pa Motor power 11 kW Rated speed 3000 min-1

Condition: new, functionality: fully functional, Year of construction: 2025, CORMAK DC2200 Model The CORMAK DC2200 is a powerful and robust cyclone dust extractor, designed to efficiently purify the air in woodworking shops, furniture factories, and metalworking facilities. Thanks to its cyclone separator, high-performance radial fan, and modern filtration system, the machine ensures effective particle separation and long-term high efficiency. Main Advantages of the CORMAK DC2200 High extraction capacity – up to 2800 m³/h – effective removal of dust and shavings from multiple workstations simultaneously Cyclone separator – separates larger particles before the filter, extending its service life Powerful 2.2 kW (2200 W / 50 Hz) motor – stable and reliable continuous operation Large 151-liter metal container – convenient and safe waste collection Hedpfx Ahsxrdhaoujng Filtration area of 4.8 m² – ensures high efficiency in capturing fine dust particles Compact, mobile design – sturdy frame with transport wheels for easy movement Quiet operation – optimized fan design reduces noise without sacrificing performance Design and Technology The CORMAK DC2200 is equipped with a 365 mm radial fan, generating a maximum static pressure of 2220 Pa. This allows efficient air suction through long ducting systems and multiple workstations. The extractor offers three suction inlets (3 × Ø100 mm) and one main inlet (Ø200 mm) for flexible setup according to the production area layout. The cyclone separation system effectively removes heavier particles at the inlet, directing only pre-cleaned air to the container. The cylindrical filter (Ø370 × 612 mm) ensures consistent airflow even during intensive operation. Performance and Ergonomics The DC2200 extractor is designed for daily use in small and medium-sized workshops. The 151-liter container (Ø620 × 570 mm) provides long working cycles without frequent emptying. With its compact dimensions (1320 × 900 × 1840 mm) and lightweight design (136 kg net), the unit fits easily into any workspace. Applications The CORMAK DC2200 is ideal for use in: Carpentry and furniture workshops Sawmills and wood-processing facilities Model-making and metalworking shops Production of composite and MDF components Standard Equipment Cyclone separator Cylindrical filter with large filtration surface 151 L metal container for dust and shavings Transport wheels Suction inlets: Ø200 mm and 3 × Ø100 mm Technical Specifications Parameter Specification Motor power 2.2 kW / 50 Hz Airflow (without filter) 2800 m³/h Max. static pressure 2220 Pa Fan diameter 365 mm Inlet diameter 1 × Ø200 mm / 3 × Ø100 mm Container volume 151 L Container dimensions Ø620 × 570 mm Filter surface area 4.8 m² Filter dimensions Ø370 × 612 mm Overall dimensions (L × W × H) 1320 × 900 × 1840 mm Weight (net / gross) 136 / 170 kg

Condition: used, Year of construction: 1999, Used machine Year of manufacture: 1999 Equipment and technical data: Hnedpsxllw Nsfx Ahuog - Maximum volume flow: approx. 3,200 m³/h - Nominal volume flow: 1,750 m³/h - Negative pressure: approx. 1,120 Pa - Filter area: approx. 10 m² - Collection container: total volume approx. 400 liters - Extraction connection diameter: 160 mm - Motor power: 3.0 kW - Voltage: 3 × 400 V, 50 Hz - Phases: 3N - CE marking Dimensions: approx. 1,775 × 898 × 2,005 mm Weight: approx. 320 kg Availability: short-term Location: 63934 Röllbach

Condition: ready for operation (used), Dust cyclone, dust separator, dust extractor, vacuum cleaner, Used machine Hodpoxh Ammsfx Ahusng Manufacturer: Piovan Type: — Overall dimensions: Width: 820 mm Depth: 600 mm Height: 2300 mm Vacuum pump data: Manufacturer: Siemens Type: ELMO-G 2BH1 Power: 4 kW Dust container size: Ø 470 x 340 mm

Condition: excellent (used), Year of construction: 2018, We offer you: Extraction system Manufacturer: Ringler (Kärcher Group) Model: RE 36/110 D11 IE3 Year of manufacture: December 2018 Technical specifications Voltage: 400 V Power: 11.0 kW Current consumption: 19.54 A Frequency: 50 Hz Speed: 2930 rpm Protection rating: I.C.L. F / BIP 55 (IP55 – dust and jet water protected) Weight: 754 kg CE marking Hnjdsxguavopfx Ahusg Motor efficiency class: IE3 Subject to change or error in technical data and information, as well as prior sale!

Condition: used, Year of construction: 1998, functionality: fully functional, BGU clean air unit type RLG 1000, H2-certified, B1 design, 400 Volt, 1.95 kW, 730 m³/h, weight 150 kg, machine size 1150 x 650 x 1400 mm Hedpfxexf E Hkj Ahuong

Condition: ready for operation (used), Dust collector, cartridge dust filter, dust filter – used machine Hnjdpfoxfkuyex Ahuog Manufacturer: Dongguan Jieba Type: Y3-132S1-2 Overall Dimensions: 1000 × 1030 × 2040 mm Electrical Data: 5.5 kW, 400 V; 11.1 A

Condition: used, Year of construction: 2000, functionality: fully functional, This Dustomat-63 - Suction nozzle Ø: 160 mm - Main motor: 3 kW - Item description: mobile, CE-mark, 3 kW, Ø=160 mm Hsdpfx Ahsxakdkjuong - Filter cleaning - Mobile separator container - Rated volumetric flow: 1,850 m³/h

Condition: excellent (used), Year of construction: 2021, Technical data: ALKO clean air mobile extraction unit, Hjdpfx Ahow T U Uzeujng Type: Mobil-Power Unit APU 120, Motor power: 1.5 kW, Inlet diameter: Ø=120 mm, Sound insulated, Mobile separation drum: 135 l, Manual filter cleaning, Dimensions: L=1,085 mm, W=650 mm, H=1,985 mm, Dust drum volume: 135 liters, Weight: 117 kg, Nominal airflow (after cleaning): 814 m³/h, Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 NESTRO® extractor, a new generation, powerful, compact, economical, and with some highlights that will inspire you. Vacuum filter for extraction and filtration of wood dust and wood chips. H3 test according to GS-HO-07 (BGHM), GS scheduled. Fire extinguishing device, fire protection flap / oxygen closure. Vacuum filter with JET compressed air pulse cleaning including suction nozzle, 5 m cable for socket connection (protective measure grounding), suction connection left / fan right Technical data: Hsdpsw Naazefx Ahuong • Airflow max./nom.: 6,000 / 5,850 m³/h • Vacuum max./nom.: 2,950 / 2,400 Pa • Suction side connection: Ø 300 mm • Mode of operation: continuous operation • Current type: three-phase current • Power consumption: 7.5 kW / 16 A / 50 Hz • Fan/drive: IE3 asynchronous motor • Filter area: 36.2 m² • Filter regeneration: JET / automatic • Compressed air consumption per cycle: 560 Nliters • Chip disposal: chip bin with PE bag • PE bag (consumable): 500020 • Collection volume: 3 x 0.16 m³ • Weight: approx. 1,250 kg • Noise level according to EN 11201: 72-74 dB(A) in accordance with MRI (+/- 4dB) • Length x width x height: 3880 x 1020 x 2250 mm Required connections: • Compressed air standard coupling NW 7.2; 6 bar, compressed air dry and oil-free • 1 x 32 A CEE socket / fuse 25 A For systems with chip sack filling, uniform filling cannot be guaranteed due to different extraction volumes and varying chip/dust contents Availability: short-term Storage location: Flörsheim