Limekon GmbH

Condition: excellent (used), Year of construction: 2018, Technical data: Operating voltage: 400V AC Maximum circuit breaker: 16A Frequency: 50/60Hz Nlsdsxzulnspfx Ah Dei Electrical connected load: 3.4kW Temperature range: +5°C above ambient temperature up to 300°C Spatial temperature deviation at 150°C: ± 3.8K Temporal temperature deviation at 150°C: ± 0.7K Heating-up time to 150°C: 29min Recovery time after 30 s door opening at 150°C: 6min Air exchange rate at 150°C: 18x/h Interior volume: 400l Maximum load per shelf: 35kg Maximum total load: 90kg Energy consumption at 150°C: 1,200Wh/h Maximum number of shelves: 10 External dimensions: Width: 1,235mm Height: 1,025mm Depth: 765mm Internal dimensions: Width: 1,000mm Height: 800mm Depth: 510mm

Condition: excellent (used), Year of construction: 2018, Technical data: Operating voltage: 400V AC Maximum pre-fuse: 16A Frequency: 50/60Hz Electrical connected load: 4.5kW Temperature range: +12°C above ambient temperature up to 300°C Spatial temperature deviation at 150 °C: ± 2.0K Nlodpoxzukksfx Ah Doi Temporal temperature deviation at 150 °C: ± 0.6K Heat-up time to 150 °C: 25 minutes Recovery time after 30 s door opening at 150 °C: 6 minutes Air exchange rate at 100 °C: 5x/h Internal volume: 741 l Maximum load per shelf: 45 kg Maximum total load: 315 kg Energy consumption at 150 °C: 800 Wh/h Max. number of shelves: 16 External dimensions: Width: 1,235 mm Height: 1,025 mm Depth: 765 mm Internal dimensions: Width: 1,000 mm Height: 800 mm Depth: 510 mm

Condition: like new (used), Year of construction: 2024, operating hours: 5 h, functionality: fully functional, Mini Rheometer – Precise Analysis of Crosslinking Behavior The Mini Rheometer is a high-precision testing device for determining the crosslinking behavior of rubber and other crosslinkable polymers. Nsdpfx Aoxzrbajh Dsli Versatile Application Options ✔ Determination of processing time for resins, cements, and adhesives ✔ Use in the dental industry ✔ Suitable for research, development, and rapid product inspection Efficient & Fast Testing The test duration matches exactly the crosslinking time of 1 g of material at the set temperature. Operating principle: Linear shear deformation according to DIN 53529 Part 1 Innovative Technology for Reliable Results ✔ Hinged measuring chamber with integrated sensor paddle ✔ Fast temperature stabilization due to the small chamber volume ✔ Dynamic measurement using sinusoidal shear loading with low amplitude and frequency ✔ Precise data acquisition via a load cell, connected to modern electronics & software ✔ Display of the crosslinking isotherm & evaluation according to DIN 53529 Part 2 Scope of delivery: Mini Rheometer, software, Windows 11 PC, volume punch

Condition: excellent (used), Weiss Type: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: Offered for sale is a WaterEvent SWT 1000 test chamber from Weiss Technik – ideal for standardized testing of enclosure or component water ingress protection (IP) classes. With optional features, testing according to IPX9K (high-pressure/steam jet), ISO 20653, and additional standards is possible. High-pressure/steam jet nozzles for IPX9K Jet nozzles for IPX5/6, among others, compliant with standards: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Nlsdpfx Ajxzprcsh Dei Possible Protection Classes & Tests Depending on configuration, the SWT system covers a wide range of tests: Standard configuration: IPX3 / IPX4 tests (spraying and splashing water from all directions). Optionally: Higher protection classes up to IPX5 / IPX6 (jetting water), and – with corresponding high-pressure configuration – up to IPX9 and IPX9K. Tests are based on standards such as DIN EN 60529 (for IP protection levels) and ISO 20653 (e.g. for vehicle or outdoor applications) – depending on intended use. Typical Applications Typical application scenarios for such a test chamber include: • Electronic devices or enclosures intended for outdoor use or humid environments, such as outdoor lighting, control housing, assemblies, panels. • Components for vehicles or machines, especially those exposed to rain, splashing water, or high-pressure cleaning (e.g., construction machinery, e-bike or vehicle parts). • Batteries or electrical components requiring water ingress protection testing – e.g., automotive industry or e-mobility applications. Technical Data: Applicable protection classes: IPX3 / IPX4 Oscillating tube radius (for IPX3/4 tests): standard 200 mm (for SWT 1000), optionally up to 400 mm. Test chamber (interior): Internal dimensions: approx. 1,000 × 1,015 × 1,000 mm (W × H × D) Operation / Control: Web panel or GUI for test programming and control. Condition: used Scope of supply: (see photo) (Data subject to change and correction. Technical specifications may be updated without notice.) Further questions welcomed by phone.

Condition: good (used), Vötsch Model: VTS 7048-1 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Performance Data: With a temperature change rate of 10 K/min Test chamber internal dimensions: height 950 mm, width 800 mm, depth 650 mm External dimensions: height 2025 mm, width 1000 mm, depth 2480 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.3 to ±0.8 Spatial temperature uniformity: ±0.5 to ±2 Temperature change rate (cooling): 10 K/min Temperature change rate (heating): 10 K/min Heat compensation at -20°C: 8,000 W Heat compensation at +20°C: 8,000 W Test volume: 480 liters Left: 1x side port, ∅ 125 mm Left: 1x side port, ∅ 50 mm Right: 1x side port, ∅ 125 mm Chamber is water-cooled Test chamber illumination: Halogen bulb: 24 V, 50 W Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 17 kW Rated current: 30 A Refrigerant: R-404A / R-23 Nljdpfx Ajxzgn Ish Dei Weight: approx. 1,250 kg Important information for your safety as a buyer! The following steps are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Specifications are subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 0500237016, input voltage: 400 V, track width: 300 mm, year of last overhaul: 2024, control cabinet height: 300 mm, control cabinet width: 300 mm, conveyor belt length: 200 mm, product height (max.): 250 mm, electrical fuse: 16 A, We are selling our CEIA metal detector. It is fully functional and has been inspected annually by CEIA. For sale due to lack of use. Nlodpfx Ahsxyzzte Dei

Year of construction: 2003, condition: used, 2 units available Dimensions: internal 320 x 270 x 400 (h) mm Njdpfxjxyzvdo Ah Dsli Dimensions: external 920 x 800 x 600 (h) mm Temperature chamber approx. 35 liters Temperature range: -70°C to +180°C Tube port: 85 mm Mains voltage: 230V +6/-10% 1/N 50Hz Rated current: 10A Rated power: 2 KW RS232 Type: VT 7004

Condition: like new (used), Year of construction: 2025, Binder MKF 115 E5 Chamber equipped with air dryer One-year warranty on spare parts MKF 115 Description Binder MKF climate chambers with temperature (-40°C to 180°C) and humidity control Binder MKF series environmental simulation chambers are ideal for all cold and heat tests based on recognized temperature and climate test standards compliant with DIN and IEC standards. High user comfort and comprehensive standard equipment offer clear advantages in daily operation. Key features: - Temperature range: -40°C to 180°C Njdoxyy Ncspfx Ah Djli - Humidity range: 10% to 98% relative humidity - Built-in 20 L water tank (models 115, 240, 720) - 4 potential-free relay outputs - 1 stainless steel wire shelf - e™ preheating chamber technology - Intuitive controller with touchscreen, time-segment programming, and real-time operation software - Internal data logger, measurement values in open format, downloadable via USB - Programmable anti-condensation protection for samples - Heated viewing window with internal LED lighting - Humidity control via capacitive humidity sensor and steam humidification - BINDER Multi Management Software APT-COM™ Basic Edition - Diagnostic system with optical and acoustic alarms - Access port with silicone plug (models 56, 115, 240: 50 mm, left side) - 2 access ports with silicone plugs (model 720: 80 mm, left and right sides) - Independent, adjustable class 2 temperature safety device (DIN 12880) with optical alarm - 4 casters, two lockable - PC connection interface: Ethernet - 230 V socket on right side panel (models 115, 240, 720) - Ramp function capability - Built-in line recorder - Real-time clock - Door heating - Alarm notification in case of no water in the fresh water tank (models 115, 240, 720) - Safety device in case of hose leakage, covers water supply and drain lines up to 1 m height - Stainless steel interior - Halogen-free refrigerant R-452A - Cooling provided by compressor unit

Condition: like new (used), Year of construction: 2025, Device like new from 2025, ex demo Manufacturer: Binder Model: KBF 115 Year of manufacture: 2025 Type: Constant climate chamber Temperature range: 0–70°C Humidity range: 10–80% Humidity control: humidity sensor + steam humidification Power: 2 kW Capacity: 115 liters Ethernet connection Internal dimensions: 60 × 35 × 45 cm Nsdsxyy Hhepfx Ah Deli External dimensions: 70 × 103 × 90 cm

Condition: excellent (used), Weiss Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet This equipment tests the ingress of water into housings. In conjunction with a timer, the test cycle can be automated for an adjustable test duration from 3 seconds up to 30 hours. According to DIN VDE 0470 T1 and EN 60529 for testing protection ratings IPX3 and IPX4. Thanks to the integrated recirculation system, water consumption can be minimized. Features: - Glass door with wiper - Pneumatic drive for the oscillating tube - Adjustable oscillation angle - Interchangeable oscillating tubes - Swivel and exchangeable nozzle holders - Adjustable and monitored water flow rate - Test duration control Mechanical Load Data: - Max. load with test object (evenly distributed over area) - Permissible test load weight for carrying rack (total): 25 kg - Spray radius: 200 mm / 400 mm Test Data for IP Protection Ratings: - Oscillation speed: approx. 60°/s - Oscillation angle for IPX3: approx. ±60° - Oscillation angle for IPX4: approx. ±180° to -10° Nledpfxexxuyts Ah Dsi Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating Data: - Voltage: 3/N/PE AC 400V ±10% 50 Hz - Rated power: 1.5 kW - Rated current: 5.0 A - Weight: 375 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: good (used), Leco LECO C230 CARBON ANALYZER Carbon Determination C230 The LECO C230 Carbon Determiner is a microprocessor-based, software-controlled instrument for measuring the carbon and sulfur content in metals, ores, ceramics, and other inorganic materials. The C230 uses an induction furnace and measures carbon via infrared absorption. The infrared (IR) source consists of a nichrome wire heated by resistance up to 8,500 °C. The IR source emits visible energy as well as all wavelengths of the infrared spectrum. For description purposes, carbon dioxide can be used; the same principle applies for sulfur detection. Carbon dioxide absorbs IR energy at a specific wavelength within the IR spectrum. Energy from the IR source is absorbed as the gas passes through the cell, thereby preventing it from reaching the IR detector. One IR cell is used both as a reference and for measurement. The total carbon content in the form of carbon dioxide is captured continuously and simultaneously. The initial reference level or baseline for the detector is set by passing oxygen through the cell to remove any remaining atmospheric gases. Technical Data: Required Gases: Carrier gas: Oxygen, 99.5% pure, 40 psi Pneumatic gas: Compressed air, nitrogen, or argon, 40 psi (2.76 bar), source must be oil- and water-free Gas flow (based on nominal analysis time): Measurement: 3 liters per analysis Pneumatic: 1 liter per analysis Regulators: Oxygen: 501-291 O₂ pressure regulator Compressed air: 766-036 air pressure regulator Inert gas: 764-216 inert gas regulator Furnace: Induction, 18 MHz, 2.2 kW Data Transfer: Included Data Storage: Without PC: 10 sample weights, 50 results, 5 methods Nedpsxxaxuefx Ah Dsli Without PC: Internal memory / Optional external display Without PC: LCD display (16 x 26 characters) Power Requirements: Determinator: 230 V~, ± 10%, 50/60 Hz, single phase, 15 amp max Operating current: 12 A Standby current: 4 A Condition: Used Scope of delivery: (See image) (Subject to change and errors in technical data; specifications subject to confirmation!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Vötsch Type: VTS 7060-5 Halogen Bulb 24V, 50W Vötsch temperature test chamber with color touch panel and S!MPAT Nledpjxw Uqpefx Ah Dsi Temperature range: -70°C to +180°C, water-cooled Temperature deviation over time: ±0.1 to ±0.5 K Temperature deviation spatially: ±0.5 to ±2.0 K Temperature change rate cooling: 6 K/min Temperature change rate heating: 6 K/min Test chamber dimensions: Width: 800 mm, Depth: 800 mm, Height: 950 mm External dimensions: Width: 1000 mm, Depth: 1750 mm, Height: 2005 mm Viewing window: Width: 300 mm x Height: 540 mm Test chamber volume: 600 liters Sound level at 1m distance (free-field measurement): < 69 dB(A) Left side port: 50 mm diameter Right side port: 2 x 125 mm diameter Rated voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 16 kW, Rated current: 30 A Circuit breaker, customer-provided: 29 A slow-blow Chamber is water-cooled Refrigerants: R-404A and R 23 Weight approx. 675 kg For your safety as the buyer, please note the following information! The following points are completed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legal, compliant refrigerants 3. After successful inspection, the chambers are subjected to a test run monitored with calibrated instruments. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) We would be happy to answer any further questions by phone.

Year of construction: 2013, condition: good (used), Universal testing machine Zwick/roll Type: 1488 Modernized in 2013 with software Nledpfx Aexw N Uvsh Doi Test force max.: 200 kN Required space: width: 2,000 mm, height: 2,100 mm, depth: 800 mm, weight approx. 1,000 kg.

Condition: excellent (used), functionality: fully functional, We are offering a top-quality CZW 1 video measuring microscope from HITEC Model: 250 x 170mm M3 Software: automatic edge detection, tolerance checking according to DIN/ISO standards, element view with tolerance input, part view with dimensioning, live image display during measurement, additional image storage for your documentation Touch PC with Windows 7 Nlsdpfjxwb Sasx Ah Doi Calibration certificate valid until 31.07.2025 The CZW1 product range supports you in performing highly accurate, repeatable measurements of complex workpieces made from any material. With numerous options such as a zoom lens, various Z-axis lengths, and a wide range of measuring table sizes, the CZW1 provides every possibility to meet your part-specific measurement requirements.

Condition: excellent (used), functionality: fully functional, We are offering a top-class QZW 1 measuring microscope from HITEC Type: 250 x 170 mm M3 software features: - Automatic edge detection - Tolerance verification according to DIN/ISO - Element view with tolerance input - Part view with dimensioning - Live image display during measurement - Additional image storage for your documentation Dell touch PC with Windows 10 (upgradeable to Windows 11) Calibration certificate valid until 31.07.2025 MEASURING RANGE X-, Y-AXIS: 250 x 170 mm LENGTH DEVIATION: 1.9 μm + L/100 (L in mm) MEASURING RANGE Z-AXIS: 150 mm MEASURING SYSTEM Z-AXIS: Optional CAMERA USB 3.0, 25 frames/s, 2.0 megapixels OBJECTIVE LENS Fixed lens / optional zoom lens 0.7x - 4.5x (manual/motorized) MAGNIFICATION 40x or 35x - 225x (zoom lens) Njdpfx Ahoxwb Hqe Djli FIELD OF VIEW 8 mm or 9 mm - 1.5 mm (zoom lens) SURFACE LIGHT 4-segment LED ring light (optional coaxial surface light) TRANSMITTED LIGHT LED (optional telecentric) POSITIONING Laser pointer TABLE LOAD CAPACITY Max. 20 kg DELIVERY CONTENT QZW1, 23" touchscreen PC, M3 software, calibration certificate, operation manual Applications The QZW1 product line supports you in highly precise and repeatable measurements of complex workpieces made from all materials. With numerous options such as a zoom lens, different Z-axis lengths, and various measuring table sizes, the QZW1 offers full flexibility for your part-specific measuring requirements.

Condition: excellent (used), Instron Instron 2663-822 Standard Video Extensometer (SVE) Non-contact strain measurement system for materials testing machines Description: The Instron 2663-822 Standard Video Extensometer (SVE) is a non-contact optical measurement system for precise detection of strain during tensile, compression, and flexural testing. Using contactless measurement via digital image processing, markers on the specimen surface are tracked—completely without mechanical influence on the test results. Ideal for applications where traditional contact extensometers (e.g., with blades) are unsuitable, such as with thin, sensitive, or elastic materials. The SVE is compatible with Instron materials testing machines and can be integrated into the Bluehill software (depending on system version). Special features: - Contactless strain measurement – no impact on the specimen - High resolution and measurement accuracy - Ideal for retrofitting older Instron systems - Low-maintenance and robust for laboratory use Technical specifications: Feature / Specification Measurement principle: Optical, contactless strain measurement Fields of view (FOV): 50 mm / 100 mm / 200 mm / 350 mm / 500 mm Resolution: - 50 mm FOV: 3 µm - 100 mm FOV: 4 µm - 200 mm FOV: 5 µm - 350 mm FOV: 25 µm - 500 mm FOV: 50 µm Measurement accuracy: - 50 mm FOV: ±5 µm or ±0.5% - 100 mm FOV: ±7.5 µm or ±0.5% - 200 mm FOV: ±10 µm or ±0.5% - 350 mm FOV: ±50 µm or ±1% - 500 mm FOV: ±100 µm or ±1% Data rate: 50 Hz Recommended markers: Dots approx. Ø 2 mm (at 50 mm FOV) / Lines approx. 1 mm wide Gauge length: Depending on the field of view, e.g., minimum 5 mm with 50 mm FOV Application range: Tensile, compression, and flexural tests under ambient or temperature-controlled conditions Power supply / interface: Via Instron system controller (compatible controller required) Reliable & durable: Proven Instron model 2663-822 Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See picture) (Specifications, subject to change and error!) We are happy to answer any further questions by phone. Nlodpfx Aexvxwksh Dsi

Year of construction: 1963, condition: not inspected (used), functionality: unexamined, machine/vehicle number: 1762, Universal Testing Machine UHP 60 – Losenhausenwerk Düsseldorf-Grafenberg For sale is a Universal Testing Machine, type UHP 60, manufactured by Losenhausenwerk A.G., Düsseldorf-Grafenberg. This machine was originally produced in the 1960s and is a classic testing device for tensile, compression, bending, and shear tests on metallic and non-metallic materials. Technical Data (according to original documentation): - Max. static test force: 60 t - Max. dynamic test force: 40 t - Test pressure: approx. 235 bar - Stroke height (piston extended): approx. 3865 mm - Total weight: approx. 2500 kg - Foundation pressure: approx. 5400 kg/m² - Grip separation: 0–1000 mm - Working cylinder diameter: 180 mm - Max. piston stroke: 235 mm - Lower grip adjustment speed: up to 750 mm/min - Grip width: 80 mm (max. opening 40 mm) - Compression plate distance: 150–400 mm - Compression plate diameter: 230 mm - Bending support distance: up to 1000 mm General Information - Year of manufacture: 1963 - Serial number: 1762 - Year of acquisition: 1963 Nedpfx Ajxvp H Ash Doli - Grip separation: up to 1000 mm - Bending test: support distance 50–1000 mm - Shear test: 15 mm Ø specimens Condition The machine comes from a laboratory inventory, is complete, and was stored in working condition until recently. Due to its age, it is sold as untested and without warranty. Special Features - Robust industrial quality, made in Germany - Includes original documentation, type plates, and machine record - Ideal for collectors, museums, or restoration purposes 💡 Collection preferred (due to weight, approx. 2.5 t).

Condition: excellent (used), Weiss Model: WKL 34/40 Weiss Climate Chamber, Air-Cooled -40°C to 150°C Nlodpfjxvpp Rox Ah Dsi Chamber volume: 34 litres Feedthroughs included as standard: R1 NW 50 mm L1 NW 120 mm Internal dimensions: Height 310 mm, Width 324 mm, Depth 300 mm External dimensions: Height 1740 mm, Width 630 mm, Depth 970 mm Specifications for temperature testing: Temperature range: -40 to +150 °C Temperature deviations at steady state (according to IEC 60068-3-5): Temporal fluctuation in centre of usable space: ± 0.3 to ± 1 K, ± 1 to ± 2 K Spatial deviation (temperature gradient): 2 to 4 K Rate of temperature change (according to IEC 60068-3-5): Heating: 2.5 K/min Cooling: 3.5 K/min Max. heat compensation: 800 W Specifications for climate testing: Temperature range: +10 to +95 °C Humidity range: 10 to 98 % RH Temperature and humidity fluctuations (at steady state, according to IEC 60068-3-5): Temperature fluctuation (temporal, centre of usable space): ± 0.3 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K (temperature gradient): 1 to 3 K Humidity fluctuation (temporal, centre of usable space): ± 3 to ± 5 % RH Operating data: Test chamber lighting: Halogen bulb 12V, 20W Rated voltage: 1/N / PE AC 230 V ± 10 %, 50 Hz Rated power: 1.8 kW Rated current: 8.0 A Protection (on site): 16A slow-blow Heat output (air-cooled test chambers): Max. heat emission to environment: 800 W Refrigerant: R-404A Weight: 110 kg Important notice: “The table shown in the photos is not included in the sale.” For your safety as a buyer, please note the following: The following procedures are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chamber undergoes a documented test run. Condition: used Scope of delivery: (see photo) (Technical data and specifications subject to change and error!) If you have any further questions, we will gladly answer them by phone.

Year of construction: 2001, condition: ready for operation (used), Various machines for laboratory use and pilot processes are available. 1) 2x Bioreactor system B. Braun Biotech Biostat 15L/Biostat C-CDU, year of construction: 2001, useful volume: 15l, control: Biostat C-CDU 1137. 2) Forced-air drying cabinet Heraeus (Kendro) UT 20, useful volume: 210l, internal dimensions X/Y/Z: approx. 610mm/510mm/680mm, max. temperature: 250°C, machine dimensions X/Y/Z: approx. 770mm/940mm/800mm. 3) Ultra cryostat Lauda K 75 with a cooling thermostat Lauda RUK 40S, bath volume: approx. 30l, min. temperature: -90°C. 4) Centrifuge CEPA 8L G, year of construction: 1985, speed: 17000rpm, drum diameter: 125mm, max. filling capacity: 10kg, power: 2.2kW. Documentation available. An on-site inspection is possible. Sale of individual units possible. Nsdpfx Ahoxvdfmj Deli

Condition: used, Year of construction: 2001, functionality: fully functional, total length: 1,000 mm, Used Mahr 828 length measuring machine incl. accessories – immediately available We are offering a very well-maintained used measuring machine from the brand Mahr, type 828 (direct measuring path 0–200 mm, travel 1000 mm), including comprehensive accessories and a PC software package for the calibration of dial gauges, limit plug gauge sets, rings, etc. Operation & condition: Nedpfx Aoxvb Hhsh Doli The machine is in ready-to-operate condition, has been regularly used and maintained. Inspection and demonstration can be arranged by appointment if interested.

Condition: good (used), Mounting frame for window glazing Omega 100 – made to order, atypical. Must be seen or call for technical specification. Nodsxu U N Hopfx Ah Deli

Condition: excellent (used), Year of construction: 2014, For sale: Automatic compression testing machine by Controls, model Pilot, year of manufacture 2014, type C56C02, serial no. 14002524. Force range up to 3,000 kN. The press was used in a road laboratory. The press is fully functional, well-maintained, and comes with a current calibration certificate issued by OUM in Łódź, with PCA accreditation. Included with the press are the operating manual and software on CD. Nljdpfxoxu Twce Ah Doi

Condition: used, Weiss Type: WK111-600 Weiss Climate Test Chamber, Air-cooled Performance Data for Temperature Tests: Temperature range: -5°C to +90°C Temporal temperature fluctuation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1 K (corresponds to temperature gradient): 1 to 2 K Temperature change rate: Heating: 0.5 K/min Cooling: 0.2 K/min Performance Data for Climatic Tests: Temperature range: +10 to +90°C Humidity range: 10 to 98% r.h. Temporal temperature fluctuation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1 K (corresponds to temperature gradient): 1 to 2 K Temporal humidity fluctuation: ±1 to ±3% Nlodpfx Aexu I D Deh Dei Test Chamber Dimensions: Width 800 mm x Depth 800 mm x Height 950 mm Housing Dimensions: Width 1000 mm x Depth 1660 mm x Height 1975 mm Access Ports: 1 access port Ø 50 mm on the left side installed 1 access port Ø 125 mm on the right side installed Power Supply: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.3 kW Rated current: 10.0 A Refrigerant: R 404 A Capacity: 600 liters Weight: 540 kg For your security as a buyer, please note the following information! The following steps are performed on all our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors excepted!) If you have further questions, feel free to contact us by phone.

Year of construction: 1970, condition: used, Technical details: x-travel: - mm y-travel: - mm z-travel: - mm workpiece weight: 800 kg machine weight approx.: 0,75 kg dimension machine xH: 1,2 x ,08 x 2,0 m The impact toughness is a measure of how resistant a material is to sudden, impact loads, especially when it has a notch (kerf) beforehand. Nlsdpfx Aexu Dwysh Dji It is mainly used for metals to assess fracture toughness under dynamic loading. *

Condition: used, Espec Type: TSD-100 100 liters usable chamber volume for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range hot chamber: +60°C to +200°C Temperature range cold chamber: -70°C to 0°C Test chamber interior dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Automatic defrosting Overtemperature protection Operating hours counter Mobile design (on castors) Njdpfx Ahsxugq Aj Deli 2 stainless steel specimen baskets Cable entry port ⌀ 100 mm Refrigerants: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. current consumption: 32A Condition: used Weight: 1100 kg Important safety information for buyers: The following procedures are performed on all chambers offered by us prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon passing inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.