Uab Eklida

Condition: ready for operation (used), power: 2.2 kW (2.99 HP), empty load weight: 635 kg, total length: 1,100 mm, total width: 630 mm, total height: 925 mm, load capacity: 22,000 kg, bending examples: - 100 mm width x 20 mm thickness - 120 mm width x 15 mm thickness min axis base between mobile and fixed pins: 110 mm max axis base between mobie and fixed pins: 310 mm Standard equipment: V-90 Max ram adjustment: 200 mm High speed displacement: 1750 mm/min Working speed: 450 mm/min Returning speed: 2000 mm/min Hnjdpfxexpgi Ij Afpou Table area: 625 x 1100 mm Table height: fixed (1) -- sliding (2): 920 mm Courant needed: 400V

Condition: ready for operation (used), Year of construction: 1973, Immediately available from location: Hydraulic press brake Lotze Model PZ 125 Year of manufacture: 1973 Pressing force: 125 t Working length: 3500 mm Distance between uprights: 2500 mm Throat depth: 250 mm Stroke: 175 mm Hnsdpfx Afoxn Rw Tjpou Installation height: 400 mm Back gauge Drive: 10 kW Weight: 10 t Complete set of tooling Price: EUR 6,000—plus VAT ex location.

Condition: ready for operation (used), Year of construction: 1988, Immediately available from location: CNC press brake Fasti Type 902 125/30 Year of manufacture: 1988 CNC control: Delem DA 23 e Hsdpfx Aexn Nnqsfpsnu Pressing force: 125 t Working length: 3,100 mm Distance between uprights: 2,550 mm Stroke: 355 mm Throat depth: 300 mm Complete set of tools Weight: 8 t Price: EUR 7,500.— plus VAT, ex location

Year of construction: 2013, condition: ready for operation (used), A metal press RMH MB (Mini Baler) by RMH Diebels Recyclingmaschinen is offered. Filling box dimensions: approx. 815mm/350mm/510mm, bale size: approx. 350mm/200mm, pressing cycle: approx. 1min, cutting blades on three sides of the filling box, lid shear force: 20t, bottom ram force: 40t, operating pressure: approx. 220bar, machine dimensions X/Y/Z: approx. 2450mm/1200mm/1400mm, weight: approx. 1800kg. An on-site inspection is possible by appointment. Hodpfxoxn Aayj Afpjnu

Year of construction: 2005, condition: ready for operation (used), Stroke: 135mm, max. sheet thickness: 20mm, max. bending length: 3050mm, pressing force: 80t, max. operating pressure: 2975psi, max. die opening: 250mm, bending angle range: 1°-42°, oil capacity: 150L, max. tool weight upper/lower: 40kg/115kg. Machine dimensions X/Y/Z: approx. 4000mm/2050mm/2450mm, weight: approx. 6000kg. Documentation available. An on-site inspection is possible. Hjdoxl Upnjpfx Afpsnu

Year of construction: 1986, condition: used, COFMO Press KD2330 Manufacturer COFMO Type Eccentric Mechanical Press Industrial Applications Stamping, punching, cold forming, and sheet metal processing in production workshops. Main Technical Specifications: - Nominal Force: 101.97 tons (1,000,000 N) - Model: KD2330 - Year: 1986 - Strokes per minute: 95 - Slide Adjustment: 100 mm - Working Voltage: 220 – 380 V Hodpjxlcxkofx Afpsnu - Air Pressure Requirement: 5 atm - Weight: 8,000 kg 🧩 Machine Usage The COFMO KD2330 102-ton press is designed for intensive sheet metal operations such as stamping and forming. It is ideal for high-speed, high-force applications in industries like metalworking, automotive parts manufacturing, and tooling. ⚙️ Features / Differentiators With its 95 strokes per minute and nearly 102 tons of force, this machine combines speed and power. The dual-voltage compatibility (220/380V) and pneumatic system make it highly adaptable for various industrial setups. Strength: 101.97T Strokes/min: 95 Weight: 8000Kg

Condition: used, Schmidt Laboratory Press MB 10 300 Item description: For sale is a high-quality Schmidt MB 10 300 laboratory press. The machine is in ready-to-operate condition and has been well maintained at all times. Ideal for laboratory applications, research, and precise pressing operations. Technical highlights: - Press force: max. 100 kN - Retraction force: approx. 43 kN - Operating pressure: approx. 200 bar - Piston diameter: 80 mm, piston rod diameter: 60 mm - Stroke: 300 mm - Heating platens: 300 x 300 mm, electrically heated up to 200°C - Heating power per platen: 3 kW - Closing speed: 23 mm/s, opening speed: 0–25 mm/s manual / 60 mm/s automatic - Hydraulics: Internal gear pump with 63 l/min, drive power 3 kW - Electrical connection: 3 x 400 V, 50 Hz - Control voltage: 24 V Hodpfoxg Hybox Afpenu Special features: - 4-column vacuum design for stable guidance - High-quality, precision-ground parallel heating platens - Separately controllable electronic temperature regulation with ±2 K accuracy (PT100) - SIEMENS PLC control system with two-hand safety operation - Automatic operation with programmable pressing and heating cycle - Adjustable press stroke with upper and lower limits - Clearly arranged control panel for easy operation - Robust, durable construction with integrated thermal insulation Dimensions and weight: - Width: 1140 mm - Height with safety door open: 1935 mm - Depth: 1350 mm - Operating height: 1110 mm - Weight: 920 kg Color scheme: - Machine frame: slate grey RAL 7015 - Control cabinet & safety enclosure: red RAL 2002 - Functional components: galvanized Condition: used Scope of delivery: (see image) - Schmidt MB 10 300 laboratory press - Integrated PLC control with operator device - Hydraulic unit and all function-related connections (Changes and errors in technical data reserved!) We will be glad to answer further questions by phone.

Year of construction: 1993, condition: ready for operation (used), A Durmazlar press brake distributed by Knuth is available. Pressing force: 35t, bending length: 1350mm, motor power: 5.5kW, stroke: 100mm, stroke rate: 17/min, max. operating pressure: 240bar, oil capacity: 150l. Machine dimensions X/Y/Z: approx. 1400mm/1400mm/2100mm, weight: approx. 1750kg, operating hours: 1258h. An on-site inspection is possible. Hsdpfx Afsxguc Ropjnu

Year of construction: 1963, condition: ready for operation (used), An old WMW single-column eccentric press is available. Pressing force: 25Mp, torque: 25kpm, shear area: 630mm², max. sheet thickness: 3.2mm, working capacity: 50kpm, pass-through sheet thickness: 1.6mm, working capacity: 25kpm, ram stroke: 5mm-60mm, max. table-to-ram distance: 400mm, stroke rate: 112 strokes/min, machine weight: approx. 1300kg. An on-site inspection is possible. Hjdpoxghpdefx Afpjnu

Year of construction: 1968, condition: used, functionality: fully functional, Type: Press Manufacturer: Smålandsstenars, Sweden Model: EPF-3 Year: 1968 Stroke: 6-70mm Pressing force: 250 kN (capacity approx. 25 ton) Stroke length 8x100 mm Stroke rate 65 x 130 strokes/min Air working pressure 0.6 MPa Weight 2000 kg Length 1.3 m Width 1.2 m Hjdpfxoxgc Rio Afpenu Height 2.10 m

Year of construction: 2004, condition: ready for operation (used), An NDC hydraulic punch is available. Weight: approx. 1750kg. An on-site inspection is possible. Hodsxfbcnopfx Afpsnu

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 10 h, functionality: fully functional, machine/vehicle number: C1-140B_10, CrimpOne C1-140B - Battery-Powered Hydraulic Hose Crimper Technical Specifications Hjdoxd U Nrjpfx Afpjnu Max. crimping force: 1400 kN Crimp range: 10 - 61 mm Max. hose size: 1 1/4 inch Die type: 140 Max. opening: +25 mm Max. die length: 80 mm Servo motor: 1.6 kW Power supply: 12 V (DC) Crimps per hour: 250 pcs Length: 460 mm Width: 280 mm Height: 370 mm Weight: 85 kg Noise level: 71 dB(A) In stock, available immediately!

Condition: ready for operation (used), Nominal force: 2500kN, operating pressure: 20MPa, ram speed down/up: 210/110mm/s, ram stroke: 500mm, throat depth: 360mm, max. distance between table and ram: 800mm, rated current: 41A, control voltage: 60V, rated voltage: 380V, connected load: 20.5kW, weight: 8t. An on-site inspection is possible. Hnsdpoxcx Aaefx Afpsu

Year of construction: 1999, condition: used, Technical Data Connection Data Power supply: 380 V Drive: three-phase motor, 0.75 kW, with electronic brake Processable cables Cross-section: up to 6 mm Motor speed: 1420 rpm, fixed Pressing force: 20 kN Stroke length: 40 mm Stroke time: 0.3 s Hedpfexcuqaox Afpenu Top dead center (TDC) infinitely adjustable Variable bottom dead center (BDC)

Condition: ready for operation (used), power: 67.051 kW (91.16 HP), empty load weight: 40,000 kg, total length: 2,500 mm, total width: 3,300 mm, total height: 4,870 mm, load capacity: 500,000 kg, Cap: 500 ton Ramdia: 430 mm Max open: 1240 mm Stroke: 680 mm Depth of throat -- ramcentre: 800 mm Max ram adjustement: 680 mm Drawning speed: 25 mm/sec Distance between table - ram: 1240 mm Table area: 2500 x 1250 mm Hnjdpfx Afexb E Hpepeu Ram area (L x D): 1050 x 620 mm

Year of construction: 1972, condition: used, Meyer press with 45 tonnes of force Hnsdpfx Ajxa D Tljfpou

Year of construction: 2003, condition: good (used), SAMDO HIGH-SPEED PRESS CAPACITY:210 STROKE LENGTH: 30mm SPM: 100~400 Die Height: 410mm Slide Adjustment: 50mm Slide Area: 1700 x 710mm Bolster Area: 1700 x 950mm CAM Feeder Spec Material Width: 250mm Material Thickness: 0.1~2.3mm Feed Angle: 180 degrees Feed Direction: Left to Right Feed Length: 78~200mm Manufactured Year: 2003 Hnodpfx Afoxax Uqopou Fully working condition and operating video is available Feed Length: 7.8~200mm Also, we have other high-speed press machines available for sale as well. Feel free to contact us.

Year of construction: 2007, condition: ready for operation (used), General Data Machine weight 1000–2000 kg Main Drive Number of axis 2 This BRUDERER BSTA 25 was manufactured in 2007. A high-speed precision stamping press, it features a vertical main ram for precise stamping and a horizontal feed mechanism for workpiece positioning. Ideal for sheet metal forming, stamping, pressing, and metal shaping, it operates at high speeds with computerized control. Compact design ensures space-saving installation. Consider the opportunity to buy this BRUDERER BSTA 25 metal press. Contact us for more information. Application Types Hodpfx Asxaqmfsfpjnu Forming

Year of construction: 1983, condition: used, Spiertz press with 100 ton pressing force Hnjdpfx Afjxacnuspeu

Condition: not inspected (used), Hydraulic press with heating plates and control system Hjdpfxjw U R E Es Afpenu

Condition: not inspected (used), Assembly press manufacturer: Fonmar, pneumatic pressure system, resistance heating, cooling by water, compressor, coolant pump, control unit, transport trolley Hnodsw U R Dnjpfx Afpou

Condition: good (used), Year of construction: 1982, Strojarne Piesok LODD-50 press brake Year of manufacture: 1982 Hedpfx Aew Ua Ebofpsnu

Year of construction: 2000, condition: ready for operation (used), Working width: 2500mm, max. sheet thickness aluminium/steel/stainless steel: 3mm/2mm/1.25mm, feeding length range: 575mm-2500mm, feeding width range: 210mm-1500mm, max. bending height: 200mm, max. negative bend: 35mm, max. diagonal twist: 3300mm, rotary table position: 0°/90°/180°/270°, working height: 1150mm. Clamping stroke: 210mm, clamping force: 240kN, clamping lowering and return speed: 50mm/s, upper beam swivel range: 135°, upper beam swivel speed: 90°/s, lower beam swivel range: 135°, lower beam swivel speed: 90°/s. Machine dimensions X/Y/Z: approx. 4050mm/1600mm/2400mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible. Hnsdow N Shkspfx Afpju

Year of construction: 1989, condition: ready for operation (used), Drive power: 23kW, pressing force: 800kN, overrun distance: 25mm, overrun time: 93ms, safety distance: 148mm, oil capacity: 650l, weight: approx. 7000kg. Includes a Sick safety light curtain. An on-site inspection is possible. Hedpfx Afsw Na E Ropsnu

Year of construction: 1993, condition: ready for operation (used), Two press brakes LVD are available. 1) Press brake LVD PPBL-H 100/40, year of manufacture: 1993, pressing force: 1000kN, working length: 4000mm, distance between uprights: 3150mm, ram stroke: 130mm, table-to-ram distance: 310mm, throat depth: 200mm, table width: 180mm, table-to-floor distance: 910mm, closing speed: 80mm/s, working speed: 8mm/s, return speed: 60mm/s, oil capacity: 120l, weight: approx. 8200kg. 2) Press brake LVD PPBL-H 165/40, year of manufacture: 1993, pressing force: 1650kN, working length: 4000mm, distance between uprights: 3150mm, ram stroke: 150mm, table-to-ram distance: 350mm, throat depth: 250mm, table width: 180mm, table-to-floor distance: 930mm, closing speed: 80mm/s, working speed: 7.5mm/s, return speed: 70mm/s, oil capacity: 150l, weight: approx. 10500kg. Documentation available. An on-site inspection is possible. Sale of individual units is possible. Hsdpjw Na Huefx Afponu