ООО "Фирма СИАТ-ЛТД"

Condition: ready for operation (used), Year of construction: 2012, stroke length: 250 mm, Mechanical stamping press manufactured in 2012. This Colombo Agostino T231A315 features a nominal press capacity of 315 tons and a slide stroke of 250 mm. It includes a motorized slide adjustment of 315 mm and a bed dimension of 1120 mm x 960 mm. If you are looking to get high-quality stamping capabilities, consider the Colombo Agostino T231A315 machine we have for sale. Contact us for further details. • Main motor power: 32 kW Giedezcywaspfx Ahvou • Stroke speed (min - max): 15 - 30 strokes/min • Slide stroke (working travel): 250 mm • Slide (ram) adjustment: 315 mm (motorized) • Shut height (max. closed die height): 650 mm • Shut height (min. closed die height): 335 mm (max. shut height minus slide adjustment) • Bed (bolster plate) dimensions: 1120 mm x 960 mm • Slide (ram) face dimensions: 1120 mm x 960 mm • Bottom cushion stroke (max): 160 mm (integrated) • Slide guidance: Precision guided ram system • Bed configuration: Fully machined bolster plate • Lubrication: Centralized automatic lubrication system Additional equipment • Feeding system: Coil/feeding line included • Optional equipment: Not included Technical Specification Stamping Force 3150 Kn

Condition: ready for operation (used), Year of construction: 2016, stroke length: 250 mm, overall weight: 58,000 kg, Mechanical stamping press manufactured in 2016. This AIDA 315/2MR/LD/TE3 features a press capacity of 315 tons and a stroke length of 250 mm. It includes a maximum die size of 2,250 × 750 mm and a maximum die weight on slide of 10,200 kg. If you are looking to get high-quality stamping capabilities, consider the AIDA 315/2MR/LD/TE3 machine we have for sale. Contact us for further details. • Main technical data: • Press capacity: 315 ton • Rated press force: 3,150 kN • Rated capacity point: 12.7 mm above BDC • Normal crankshaft stop position: TDC • Stroke length: 250 mm • Slide adjustment: 160 mm • Shut height: 700 mm • Slide speed: 15–40 strokes/min • Maximum flywheel speed: 628.5 rpm • Maximum clutch engagements: 24/min • Stopping time: 0.386 s • Safety distance: 618 mm • Die and working area: • Maximum die size: 2,250 × 750 mm • Maximum die weight on slide: 10,200 kg • Machine structure: • Frame design: double upright (straight-side) frame • Drive system: double connecting rod (double pitman) • Slide guidance: guided slide • Motion type: mechanical crank press • Slide movement: vertical reciprocating motion • Main axis movement: rotary crankshaft drive • Ram/slide adjustment: motorized • Cushion system: • Type: integrated drawing cushion • Maximum cushion force: 3,450 daN at 0.6 MPa • Auxiliary systems: • Counterbalance cylinders: yes (counterbalance force 102 kN at 6 bar) • Clutch & brake system: pneumatic • Lubrication system: centralized automatic lubrication • Safety system: integrated • Operator protection: included • Automation ready: yes • Performance and safety highlights: • High-rigidity double-upright frame construction • Double-pitman drive for improved slide parallelism and load distribution • Pneumatic clutch-brake for reliable operation and fast stopping • Integrated safety and operator protection systems • Designed for integration with automatic feeding and transfer systems • Auxiliary systems: Giodpfx Ahezcpwijveu • Counterbalance cylinders: yes (counterbalance force 102 kN at 6 bar) (Included) • Clutch & brake system: pneumatic (Included) • Lubrication system: centralized automatic lubrication (Included) • Drawing cushion: integrated (Included) • Safety system: integrated (Included) • Operator protection: yes (Included) • Automation ready: yes (Included) • Other optional equipment: Not included Technical Specification Stamping Force 3150 Kn

Condition: ready for operation (used), Year of construction: 2018, stroke length: 250 mm, overall weight: 58,000 kg, Mechanical stamping press manufactured in 2018. This AIDA 315/2MR/LD/TE 3 features a press capacity of 315 tons and a stroke length of 250 mm. It has a maximum die size of 2,250 × 750 mm and can accommodate a maximum die weight of 10,200 kg. If you are looking to get high-quality stamping capabilities, consider the AIDA 315/2MR/LD/TE 3 machine we have for sale. Contact us for further details regarding this machine. • Press capacity: 315 ton • Rated capacity: 3,150 kN • Rated capacity point: 12.7 mm above BDC • Stroke length: 250 mm Gsdpozcptwjfx Ahveiu • Slide adjustment: 160 mm • Shut height: 700 mm • Maximum die size: 2,250 × 750 mm • Maximum die weight: 10,200 kg • Flywheel speed: 628.5 rpm • Operating speed: 15–40 spm • Maximum clutch engagements: 24 per min • Stopping time: 0.386 s • Safety distance: 618 mm • Cushion force: 3,450 daN @ 0.6 MPa • Counterbalance force: 102 kN @ 6 bar • Frame type: Double upright, double-crank • Clutch/brake system: Pneumatic • Lubrication system: Centralized automatic • Slide guiding: Precision guided • Drawing cushion: Integrated • Counterbalance cylinders: Yes • Safety system: Integrated • Operator protection: Yes • Automation ready: Yes • Drawing cushion: Integrated (Included) • Counterbalance cylinders: Yes (Included) • Safety system: Integrated (Included) • Operator protection: Yes (Included) • Automation ready: Yes (Included) • Other optional equipment: Not included Technical Specification Stamping Force 3150 Kn

Condition: ready for operation (used), Year of construction: 2013, stroke length: 250 mm, overall weight: 58,000 kg, Mechanical stamping press manufactured in 2013. This AIDA 315/2MR/LD/TE 3 features a press capacity of 315 tons and a stroke length of 250 mm. It is designed for high-precision stamping operations with a robust double-upright frame and integrated drawing cushion. If you are looking to get high-quality stamping capabilities, consider the AIDA 315/2MR/LD/TE 3 machine we have for sale. Contact us for further details regarding this machine. • Main technical data: • Press capacity: 315 Ton • Rated press force: 3,150 kN • Rated capacity point: 12.7 mm above Bottom Dead Center (BDC) • Normal crankshaft stop position: Top Dead Center (TDC) • Stroke length: 250 mm • Slide adjustment: 160 mm • Shut height: 700 mm • Slide speed: 15–40 strokes/min • Maximum flywheel speed: 628.5 rpm • Maximum clutch engagements: 24 engagements/min • Stopping time: 0.386 s • Safety distance: 618 mm • Die and working area: • Maximum die size: 2,250 × 750 mm Gedpfozcppxsx Ahveiu • Maximum die weight on slide: 10,200 kg • Machine structure: • Frame design: Double upright (straight-side) frame • Drive system: Double connecting rod (double pitman) • Slide guidance: Guided slide • Motion type: Mechanical crank press • Slide movement: Vertical reciprocating motion • Main axis movement: Rotary crankshaft drive • Ram adjustment: Motorized slide adjustment • Cushion system: • Type: Integrated drawing cushion • Maximum cushion force: 3,450 daN at 0.6 MPa • Systems and safety: • Counterbalance cylinders: Yes • Counterbalance force: 102 kN at 6 bar • Clutch & brake system: Pneumatic • Lubrication system: Centralized automatic lubrication • Safety system: Integrated • Operator protection: Included • Automation ready: Yes • Performance and safety notes: • High-rigidity double-upright frame construction • Double-pitman drive for improved slide parallelism and load distribution • Pneumatic clutch-brake for reliable operation and fast stopping • Designed for integration with automatic feeding and transfer systems • Auxiliary systems: • Counterbalance cylinders: yes (counterbalance force 102 kN at 6 bar) (Included) • Clutch & brake system: pneumatic (Included) • Lubrication system: centralized automatic lubrication (Included) • Drawing cushion: integrated (Included) • Safety system: integrated (Included) • Operator protection: yes (Included) • Automation ready: yes (Included) • Other optional equipment: Not included Technical Specification Stamping Force 3150 Kn

Condition: used, Year of construction: 1950, machine/vehicle number: 26284, functionality: unexamined, power: 1.6 kW (2.18 HP), pressing force: 30 t, overall weight: 1,100 kg, We offer this used Raskin 30TRG crank press, year of construction 1950. Gedjza En Sspfx Ahveiu Machine has not been used for 30+ years and was sitting in a corner of the workshop under a tarp. Now it must go. Untested and condition unknown, but was working when put aside, and externally looks in working order. Included is the punching tooling visible on the pictures (on the pallet + cardboard box).

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, power: 110 kW (149.56 HP), pressing force: 1,600 t, stroke length: 400 mm, table width: 1,600 mm, table length: 1,600 mm, distance table to ram: 870 mm, overall weight: 141,500 kg, Manufactured by Voronezh plant (Russia) Year of manufacture 1985 Capacity, ton 1600 Slider stroke, mm 400 Strokes per minute 16 Table size, mm 1600 x 1600 Ram dimensions, mm 1600 x 1600 Slider adjustment, mm 220 Max distance between table and slider, mm 870 Slider ejector capacity, ton 80 Slider ejector stroke, mm 100 Motor capacity, kW 110 Press dimensions, mm 4670 x 4370 x 8110 Press weight, kg 141500 Godpsy S Rqqjfx Ahvsiu 1600 ton single–crank mechanical press K04.150.242. Robust closed-type design, suitable for large dies and high-force sheet metal operations. This press is in excellent condition.

Condition: ready for operation (used), Year of construction: 2004, stroke length: 200 mm, Mechanical stamping press manufactured in 2004. This AIDA NC2-1600(2) features a pressing force of 160 tons and a slide stroke of 200 mm. It has a slide area of 1500 x 580 mm and a bolster area of 2040 x 760 mm. If you are looking to get high-quality stamping capabilities, consider the AIDA NC2-1600(2) machine we have for sale. Contact us for further details. • Strokes per minute: 30–55 spm • Die height: 450 mm • Slide adjustment: 100 mm • Slide area: 1500 x 580 mm • Bolster area: 2040 x 760 mm • Main motor: 15 kW Technical Specification Gsdpfxoy Ex R Eo Ahvsiu Stamping Force 1600 Kn

Condition: used, Year of construction: 1968, pressure 150 t throat 450 mm stroke 115 fix mm no. of strokes 45 /min distance table/ram, max. stroke up, adjustment up 400 mm table surface area 2250 x 1090 mm table height over floor 900 mm passage to the back 1900 mm Giodpfx Asyx Il Sjhveu ram surface 1900 x 900 mm ram adjustment 100 mm power requirement 16,0 kW weight 19,5 t Dimensions (WxDxH) 3,0 x 2,3 x 3,9 m with motor, pneumatic clutch, fix stroke, motoric ram adjustment, pneumatic counterbalance in ram, fix table, throat 360 mm, manual centralized lubrication as is where is, WITHOUT putting into operation

Condition: ready for operation (used), Year of construction: 2012, This PRESSIX Pressix 25 CNR 4 was manufactured in 2012. Ideal for high-precision stamping, blanking, and continuous strip processing, it includes a manual decoiler, servo roller feeder G+K WVS/L 150, and a motorized recoiler. Consider the opportunity to buy this PRESSIX Pressix 25 CNR 4 mechanical stamping press. Contact us for more information. • Suitable for: High-precision stamping, blanking, washers, discs, continuous strip processing Gedpfx Ahox E Ea Hsvoiu Additional equipment • Manual decoiler • Servo roller feeder: G+K WVS/L 150 • Motorized recoiler

Condition: new, Year of construction: 2021, functionality: fully functional, For sale: Metal Stamping Press JINAOLAN ALP-25V (25T, 2021) Condition: Brand new, never used, original packaging. We use several of these presses in our factory—photos show those units. Two brand new units available. Manufacturer: JINAOLAN Machinery (China) Model: ALP-25V Gsdpfx Ahsxniw Sevjiu Year of Manufacture: 2021 Modern CNC-controlled eccentric press designed for forming, stamping, and punching various metal components. The press is equipped with a high-level operator safety system (Laser Safe), ensuring maximum operational safety. Technical Specifications: - Rated Capacity: 25 tons - Stroke Rate: 60–140 strokes/min (SPM) - Stroke Length: 60 mm - Max Die Height: 200 mm - Die Height Adjustment: 50 mm - Slide Area: 470 × 245 mm - Bolster Area: 680 × 300 mm - Main Motor: 2.2 × 4 kW - Max Air Pressure: 0.51 MPa - Max Tool Weight: 0.30 t - Control: CNC (programmable control unit) - Safety System: Laser Safe – two-hand control system Application: This press is suitable for stamping, punching, bending, and forming metal parts. Thanks to CNC control and precision mechanics, the machine ensures high productivity, repeatability, and safety. Ideal for small and medium-sized manufacturing, metal component, and forming part production. Advantages: - Completely new, factory-sealed equipment - CNC control: precise and user-friendly programming - Laser Safe system: press can be lowered only when both hand controls are activated (two-hand safety) - Reduces risk of injury, complies with stringent safety standards - Robust construction and stable eccentric drive - 2 brand new presses in stock + several used units in operation If you have further questions, we are happy to answer them.

Condition: used, Year of construction: 2020, functionality: fully functional, For sale: Metal Stamping Press ALP-25C (25T, 2020) Condition: Virtually unused, like new. Manufacturer: JINAOLAN Machinery (China) Giodpfxsxmwnis Ahvou Model: ALP-25C Year of manufacture: 2020-11 A compact and reliable mechanical eccentric stamping press designed for forming, punching, and stamping various metal parts. Technical specifications: Nominal capacity: 25 T Stroke: 45 mm Stroke rate: 145 strokes/min (SPM) Max. die height: 180 mm Height adjustment: 35 mm Ram working area: 170 × 150 mm Bolster area: 370 × 240 mm Country of origin: China Applications: The ALP-25C press is suitable for: stamping, cutting, bending, and forming metal parts; small pressing operations in tool, metal structure, and automotive parts manufacturing; working with thin and medium-gauge sheet metal. If you have any further questions, please feel free to contact us.

Condition: excellent (used), Year of construction: 1959, functionality: fully functional, pressing force: 400 t, stroke length: 450 mm, table width: 2,050 mm, table length: 1,500 mm, Weingarten OK 400.21.45 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. Godpfsv E Rm Hsx Ahvsiu New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Weingarten OK 400.21.45press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, Year of construction: 2010, pressure 600 t distance between columns 3640 mm stroke fix 350 mm no. of strokes 11 - 44 /min dayligth (stroke and adjustment up) 1550 mm column travel -side 2200 mm table surface area 3600 x 2500 mm ram surface 3600 x 2500 mm ram adjustment 400 mm band width 2000 mm material thickness 0,6 - 2,5 mm material cross-cut 1600 x 2,5 mm² coil weight 35,0 t Number of Straightening rolls 13 0 Gijdpjvut Dysfx Ahvsu straightening roll diameter 50 mm Blanking Line (press, coil line, blank stacking system) yom 1993 - 2010: new control Siemens S 7 - press Schuler type EBS 4-600 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available

Condition: used, Year of construction: 1965, pressure 160 t stroke 15 - 170 mm no. of strokes 15 - 40 /min distance between columns 2050 / 1900 mm dayligth (stroke and adjustment up) 690 mm column travel -side 800 mm table surface area 1600 x 800 mm table height over floor 900 mm ram surface 1620 x 700 mm ram adjustment 140 mm power requirement 15,0 kW Giodpfx Aevuk S Ujhveu Weight 24,0 t dimensions of the machine ca. 3,3 x 2,3 x 5,3 mxmxm total height over floor 4,8 m height under floor 0,5 m with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, motoric ram adjustment, two-hand and foot operation as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1980, pressure 100 t stroke 20 - 200 mm no. of strokes 20 - 60 /min distance between columns 1230 mm dayligth (stroke and adjustment up) 650 mm column travel -side 540 mm table surface area 1050 x 750 mm table height over floor 760 mm ram surface 1000 x 750 mm ram adjustment 100 mm power requirement 18,0 kW Weight 20,5 t dimensions of the machine ca. 2,8 x 1,9 x 4,3 mxmxm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic hydraulic clutch/brake combination (Desch), hydraulic overload protection in ram, semi-automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motoric circular oil lubrication, two-hand and foot operation as is where is, WITHOUT putting into operation Godpfxovuk H Eo Ahvjiu

Condition: used, Year of construction: 1973, pressure 500 t distance between columns 1620 mm stroke 40 - 160 mm no. of strokes 32 / 48 Hub/min dayligth (stroke and adjustment up) 660 mm column travel -side 400 x 430 mm table surface area 1600 x 1300 mm table height over floor 750 mm Giedpfx Aevuk Euehveu ram surface 1400 x 1200 mm power requirement 44,0 / 66,0 kW weight of the machine ca. 56,00 t required space 3,55 x 2,55 x 5,1 m with motor, pneumatic clutch/brake combination (Desch), mechanical overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment as is where is, WITHOUT putting into operation / WITHOUT additional work, free loaded to truck Video of 'sister maschine' available