Service Romijn Spray Equipment

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total height: 3,450 mm, total length: 7,000 mm, total width: 5,400 mm, volume flow: 25,000 m³/h, type of input current: three-phase, overall weight: 3,200 kg, working width: 2,750 mm, warranty duration: 12 months, workpiece weight (max.): 3,500 kg, inner dimension height: 2,750 mm, inner dimension length: 6,900 mm, load capacity: 3,500 kg, inner dimension width: 3,900 mm, heating capacity: 213 kW (289.60 HP), filter area: 25 m², power: 15 kW (20.39 HP), Equipment: cabin, documentation/manual, emergency stop, lighting, ⭐⭐⭐⭐⭐ Ventis Nexus 250 – Professional Automotive Spray Booth Reliable. Efficient. Built for Daily Workshop Use. ⚡ Professional full downdraft spray booth for body shops and refinishing centers ⚡ Engineered for stable airflow, clean working conditions, and optimized operating costs ⚡ Designed and delivered in compliance with EU regulations 🔑 Key Advantages ✔ Full downdraft airflow – consistent paint quality and excellent overspray control ✔ Direct-drive (DDF) fans with VFD control – lower energy consumption and maintenance ✔ Stable airflow in all operating modes ✔ Insulated sandwich panel construction – thermal stability and noise reduction ✔ Designed for intensive daily professional use 🌬️ Airflow Concept – Full Downdraft The Nexus 250 operates in a full downdraft configuration. Clean, filtered air is supplied through a full-surface ceiling plenum and evenly directed downward through the working zone. Contaminated air is extracted via a high-efficiency exhaust system, ensuring: uniform airflow reduced dust contamination high-quality paint finish 🔧 Fans & Airflow Control Airflow is generated by high-efficiency direct-drive (DDF) fans, digitally controlled via variable frequency drives (VFDs). Benefits: precise airflow regulation reduced energy consumption lower noise levels no belts = reduced mechanical wear and downtime 🧱 Construction & Insulation Insulated EPS-core sandwich panels for energy-efficient operation Roof made of corrosion-resistant galvanized steel Durable construction suitable for demanding workshop environments 🔥 Heating System The Nexus 250 is equipped with an integrated heating system with a Riello 40 G20 burner, providing: uniform warm air distribution stable curing conditions reduced drying times 🎨 Operating Modes ✔ Painting mode – full downdraft airflow for clean application ✔ Drying mode – regulated airflow and temperature for efficient curing Giodpfx Aex Tiz Dea Ijl 🧼 Filtration System Ceiling-mounted intake filtration with diffusion media High-efficiency exhaust filters capturing overspray and airborne particles Clean exhaust air before discharge 🚪 Doors, Lighting & Access Four-leaf glazed aluminum front doors – wide access and excellent visibility Side technical service doors for maintenance Integrated LED lighting for bright, uniform illumination 📐 Dimensions & Technical Data Internal dimensions: approx. 7,000 × 4,000 × 2,750 mm Airflow capacity: approx. 25,000 m³/h ➕ Optional Equipment 15" HMI touchscreen control panel Alternative insulation: PIR or mineral wool Integration with prep stations or mixing rooms Preparation for in-floor scissor lift 🚚 Delivery & Installation ✔ Manufactured to order or available upon request (8-10 weeks) ✔ Professional installation and commissioning across the EU ✔ Permit and documentation support included 🛡️ Warranty & Support ✔ Manufacturer warranty 12 months ✔ EU-based technical support and service 📩 Contact us for availability, delivery time, configuration options, and a tailored offer. We will be happy to advise you and prepare a solution adapted to your workshop.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total height: 4,350 mm, total length: 8,000 mm, total width: 6,400 mm, volume flow: 35,000 m³/h, type of input current: three-phase, overall weight: 3,800 kg, working width: 3,500 mm, warranty duration: 12 months, workpiece weight (max.): 4,200 kg, inner dimension height: 3,500 mm, inner dimension length: 7,900 mm, load capacity: 4,200 kg, inner dimension width: 4,900 mm, heating capacity: 290 kW (394.29 HP), filter area: 32 m², power: 22 kW (29.91 HP), Equipment: cabin, documentation/manual, emergency stop, lighting, ⭐⭐⭐⭐⭐ Ventis Nexus 350 – Professional Spray Booth for Vans & Buses Large Format. High Airflow. Built for Commercial Vehicles. ⚡ Professional full downdraft spray booth for vans & buses ⚡ Designed for body shops specializing in commercial vehicles ⚡ Large working volume, stable airflow and optimized operating costs ⚡ Designed and delivered in full compliance with EU regulations 🔑 Key Advantages for Vans & Buses ✔ Large internal dimensions optimized for vans & buses ✔ Full downdraft airflow – consistent paint quality on large panels and roofs ✔ High-capacity DDF fans with VFD control ✔ Increased airflow for high cabins and long vehicle bodies ✔ Insulated sandwich panel construction – thermal stability and noise reduction ✔ Designed for intensive, multi-shift professional use 🌬️ Airflow Concept – Full Downdraft for Vans & Buses The Ventis Nexus 350 operates in a full downdraft configuration, specifically optimized for vans & buses. uniform airflow on roofs, sides and rear sections reduced dust contamination on large surfaces consistent, repeatable paint finish on vans & buses 🔧 Fans & Airflow Control – DDF + VFD Airflow is generated by high-efficiency direct-drive (DDF) fans, digitally controlled via variable frequency drives (VFDs). Total installed fan power: 22 kW Airflow capacity: approx. 35,000 m³/h Benefits: stable airflow even with tall vehicles precise airflow regulation in painting and drying modes lower energy consumption compared to fixed-speed systems no belts or pulleys = reduced maintenance and downtime 🧱 Construction & Insulation Insulated EPS-core sandwich panels for energy-efficient operation Roof made of corrosion-resistant galvanized steel Durable construction suitable for demanding commercial vehicle workshops 🔥 Heating System Integrated high-capacity heating system featuring a Riello RG5S burner (290 kW), providing: uniform warm air distribution throughout the entire booth stable curing conditions for large vehicle surfaces fast temperature build-up and reduced drying times, even with high air volumes 🎨 Operating Modes ✔ Painting mode – full downdraft airflow for clean application on vans & buses ✔ Drying mode – regulated airflow and temperature for efficient curing 🧼 Filtration System Ceiling-mounted intake filtration with diffusion media High-efficiency exhaust filters capturing overspray and airborne particles Clean exhaust air before discharge 🚪 Doors, Lighting & Access Four-leaf glazed steel front doors – wide access for vans & buses Side technical service doors for maintenance and inspection Integrated LED lighting for bright, uniform illumination of large vehicles 📐 Dimensions & Technical Data Internal dimensions: approx. 8,000 × 5,000 × 3,500 mm Airflow capacity: approx. 35,000 m³/h Total fan power: 22 kW Heating capacity: Riello RG5S – 290 kW ➕ Optional Equipment 15" HMI touchscreen control panel Alternative insulation: PIR or mineral wool Integration with prep stations or paint mixing rooms Gisdpex Tiwrjfx Aa Ijl Preparation for in-floor scissor lift 🚚 Delivery & Installation ✔ Professional installation and commissioning across the EU ✔ Permit and documentation support included 🛡️ Warranty & Support ✔ Manufacturer warranty: 12 months ✔ EU-based technical support and service

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 2,550 mm, total length: 2,430 mm, total width: 2,330 mm, volume flow: 1,000 m³/h, type of input current: AC, overall weight: 1,200 kg, warranty duration: 12 months, power: 1 kW (1.36 HP), Equipment: cabin, documentation/manual, emergency stop, lighting, ⭐⭐⭐⭐⭐ Ventis Paint Mixing Lab – Professional Paint Mixing Room Clean Air | Safe Handling | Workshop Integration ⚡ Professional paint mixing room designed for body shops and industrial coating facilities ⚡ Controlled ventilation for safe paint handling and mixing ⚡ Compact footprint – ideal for integration with spray booths and prep stations ⚡ CE-compliant solution for professional workshop environments 🔑 Key Advantages ✔ Controlled airflow for safe paint mixing ✔ Effective removal of vapours and airborne contaminants ✔ Improved working safety and paint quality ✔ Compact, modular construction ✔ Designed for daily professional use 📐 Dimensions & Electrical Data Gisdpfsx Thbvjx Aa Ijl External dimensions: 2330 × 2430 × 2550 mm Power supply: 220 / 380 V Installed power: approx. 0.5 kW 🌬️ Ventilation & Filtration The Ventis Paint Mixing Lab is equipped with a dedicated ventilation system designed specifically for paint mixing operations. Axial ventilation fan: 370 W High-efficiency filtration system Continuous extraction of vapours and airborne particles This ensures: clean air in the working zone reduced exposure to harmful substances compliance with professional workshop safety requirements 🧱 Construction EPS insulated wall panels, powder-coated steel finish Durable construction suitable for workshop environments Easy-to-clean interior surfaces 🚪 Access Working door width: 1800 mm Comfortable access for operators and materials 💡 Lighting Integrated LED lighting (16 W) Clear, uniform illumination for safe and precise work 🖥️ Application ✔ Paint mixing ✔ Material preparation ✔ Storage and handling of paints and coatings Designed as a dedicated mixing room, reducing contamination and improving workflow efficiency between preparation and painting areas. 🛡️ Certification & Warranty ✔ CE certified ✔ Manufacturer warranty 🚚 Delivery & Installation ✔ Delivered as a complete system ✔ Professional installation and commissioning available ✔ Integration support with existing spray booths and prep stations 📩 Contact us for availability, configuration options and a tailored offer. The Ventis Paint Mixing Lab is an essential element for workshops aiming to increase safety, cleanliness and efficiency in their coating process.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 7,000 mm, total width: 4,000 mm, volume flow: 12,500 m³/h, type of input current: three-phase, overall weight: 1,800 kg, working width: 4,000 mm, warranty duration: 12 months, inner dimension height: 3,000 mm, inner dimension length: 7,000 mm, filter area: 25 m², power: 10 kW (13.60 HP), Equipment: documentation/manual, emergency stop, lighting, ⭐⭐⭐⭐⭐ Ventis Prep-Station – Professional Preparation Workstation Clean Airflow | Efficient Preparation | Workshop Integration ⚡ Professional prep station for sanding, masking and surface preparation ⚡ Designed for daily use in body shops and refinishing centers ⚡ Optimized airflow for dust extraction and clean working conditions ⚡ Modular design – easy integration with spray booths and workshops ⚡ EU-compliant solution for professional environments 🔑 Key Advantages ✔ Clean and controlled airflow in the preparation zone ✔ Effective dust and particle extraction ✔ Improved working conditions and surface quality before painting ✔ Reduced contamination transferred to the spray booth ✔ Compact, modular design ✔ Designed for intensive daily workshop use 🌬️ Airflow & Ventilation Concept The Ventis Prep-Station is designed to provide stable, directional airflow in the working area, efficiently removing sanding dust and airborne particles. Optimized airflow across the work zone Efficient extraction of dust and preparation residues Cleaner environment for operators and surrounding areas The system supports: improved surface quality before painting reduced rework and contamination inside the spray booth 🧱 Construction & Design Robust steel structure suitable for workshop environments Modular configuration – single or multi-bay layouts possible Designed for flexible installation and future expansion 🧼 Filtration System Multi-stage filtration system for effective dust capture: Primary filters for coarse particles Fine filtration for airborne dust Godpfx Ajx Tg Syoa Ioil Easy access for maintenance and filter replacement Ensures clean exhaust air and compliance with workshop standards. 💡 Lighting Integrated LED lighting Bright, uniform, shadow-free illumination Improved visibility during sanding and preparation work 🖥️ Control System Simple and reliable control panel Control of ventilation and lighting Designed for everyday workshop operation 📐 Configuration & Options Single or multi-bay prep stations Integration with spray booths and mixing rooms Custom dimensions and layout on request Optional enclosure panels and airflow configurations 🚚 Delivery & Installation ✔ Professional installation and commissioning available ✔ Integration support with existing workshop layouts ✔ EU-compliant documentation 🛡️ Warranty & Support ✔ Manufacturer warranty 12 months ✔ EU-based technical support and service

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total height: 3,450 mm, total length: 7,000 mm, total width: 5,400 mm, volume flow: 25,000 m³/h, type of input current: three-phase, overall weight: 3,200 kg, working width: 2,750 mm, warranty duration: 12 months, workpiece weight (max.): 3,500 kg, inner dimension height: 2,750 mm, inner dimension length: 6,900 mm, load capacity: 3,500 kg, inner dimension width: 3,900 mm, heating capacity: 213 kW (289.60 HP), filter area: 25 m², power: 15 kW (20.39 HP), Equipment: cabin, documentation/manual, emergency stop, lighting, ⭐⭐⭐⭐⭐ Ventis Nexus 250 – Professional Automotive Spray Booth Reliable. Efficient. Built for Daily Workshop Use. ⚡ Professional full downdraft spray booth for body shops and refinishing centers ⚡ Engineered for stable airflow, clean working conditions, and optimized operating costs ⚡ Designed and delivered in compliance with EU regulations 🔑 Key Advantages ✔ Full downdraft airflow – consistent paint quality and excellent overspray control ✔ Direct-drive (DDF) fans with VFD control – lower energy consumption and maintenance ✔ Stable airflow in all operating modes ✔ Insulated sandwich panel construction – thermal stability and noise reduction ✔ Designed for intensive daily professional use 🌬️ Airflow Concept – Full Downdraft The Nexus 250 operates in a full downdraft configuration. Clean, filtered air is supplied through a full-surface ceiling plenum and evenly directed downward through the working zone. Contaminated air is extracted via a high-efficiency exhaust system, ensuring: uniform airflow reduced dust contamination high-quality paint finish 🔧 Fans & Airflow Control Airflow is generated by high-efficiency direct-drive (DDF) fans, digitally controlled via variable frequency drives (VFDs). Benefits: precise airflow regulation reduced energy consumption lower noise levels no belts = reduced mechanical wear and downtime 🧱 Construction & Insulation Insulated EPS-core sandwich panels for energy-efficient operation Roof made of corrosion-resistant galvanized steel Durable construction suitable for demanding workshop environments 🔥 Heating System The Nexus 250 is equipped with an integrated heating system with a Riello 40 G20 burner, providing: uniform warm air distribution stable curing conditions reduced drying times 🎨 Operating Modes ✔ Painting mode – full downdraft airflow for clean application ✔ Drying mode – regulated airflow and temperature for efficient curing 🧼 Filtration System Ceiling-mounted intake filtration with diffusion media High-efficiency exhaust filters capturing overspray and airborne particles Clean exhaust air before discharge 🚪 Doors, Lighting & Access Four-leaf glazed aluminum front doors – wide access and excellent visibility Side technical service doors for maintenance Integrated LED lighting for bright, uniform illumination 📐 Dimensions & Technical Data Internal dimensions: approx. 7,000 × 4,000 × 2,750 mm Airflow capacity: approx. 25,000 m³/h Gijdpfjx Tg Nfox Aa Iol ➕ Optional Equipment 15" HMI touchscreen control panel Alternative insulation: PIR or mineral wool Integration with prep stations or mixing rooms Preparation for in-floor scissor lift 🚚 Delivery & Installation ✔ Manufactured to order or available upon request (8-10 weeks) ✔ Professional installation and commissioning across the EU ✔ Permit and documentation support included 🛡️ Warranty & Support ✔ Manufacturer warranty 12 months ✔ EU-based technical support and service 📩 Contact us for availability, delivery time, configuration options, and a tailored offer. We will be happy to advise you and prepare a solution adapted to your workshop.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total height: 6,200 mm, total length: 15,150 mm, total width: 7,400 mm, volume flow: 55,000 m³/h, type of input current: three-phase, overall weight: 8,200 kg, working width: 6,000 mm, warranty duration: 12 months, workpiece weight (max.): 12,000 kg, operating pressure: 8 bar, inner dimension height: 5,500 mm, inner dimension length: 15,000 mm, inner dimension width: 6,000 mm, control cabinet length: 15,000 mm, air demand: 500 m³/h, operating temperature: 80 °C, working height: 5,500 mm, input voltage: 380 V, heating capacity: 448 kW (609.11 HP), power: 52 kW (70.70 HP), Equipment: cabin, documentation/manual, emergency stop, lighting, ⭐⭐⭐⭐⭐ Ventis TITAN 550 – Industrial & Cargo Spray Booth Heavy-Duty | Integrated Heating | DDF Fans with VFD Control ⚡ Professional industrial spray booth for trucks, buses, trailers and oversized components ⚡ Designed for continuous heavy-duty operation ⚡ Integrated industrial heating system as standard ⚡ High airflow volume with precise electronic control ⚡ EU-compliant solution for professional workshops 🔑 Key Advantages ✔ Extra-large internal working space ✔ Full downdraft airflow for consistent coating quality ✔ Integrated heating system – standard ✔ Direct-Drive Fans (DDF) with Variable Frequency Drives (VFD) ✔ Lower energy use and reduced maintenance vs belt-driven systems ✔ Robust insulated steel construction ✔ Designed for multi-shift industrial use 📐 Dimensions External (L × W × H): 15,150 × 7,400 × 6,200 mm Internal (L × W × H): 15,000 × 6,000 × 5,500 mm Power supply: 380/400 V | 50–60 Hz | 3 Phase 🌬️ Ventilation System – DDF + VFD High-capacity industrial ventilation system based on Direct-Drive Fans (DDF) combined with VFD control. Giodex Tf I Tepfx Aa Isl Inlet fans: 4 × 7.5 kW (DDF) Exhaust fans: 2 × 11 kW (DDF) Benefits: no belts or pulleys precise airflow regulation lower noise and energy consumption soft start / stop and longer component lifetime Ensures stable airflow, efficient overspray extraction and uniform coating quality across large surfaces. 🔥 Heating System Integrated industrial heating system designed for large air volumes. Burners: 2 × Riello G20 Heat exchanger: SUS304 stainless steel, 1.5 mm Max. baking temperature: 80°C Heating performance: 20°C → 60°C in approx. 8–10 min Insulated heating cabinets (rock wool) 🧱 Construction & Access 75 mm EPS insulated sandwich panels 0.5 mm galvanized steel skin Main door: 4-leaf folding, 5,000 × 5,000 mm Service door: 800 × 2,000 mm 💡 Lighting & Filtration LED lighting: ceiling and side walls, bright and shadow-free Multi-stage filtration system: Primary filter: >10 μm (≈83%) Ceiling filter: >4 μm (≈98%) Wall exhaust filter: fiberglass (≈70%) 🖥️ Control System Intelligent control cabinet Integrated control of ventilation (VFD), heating, lighting Painting and drying modes Overload and phase-loss protection 🚚 Delivery & Support ✔ Professional installation and commissioning available across the EU ✔ Support with permits and technical documentation ✔ Manufacturer warranty and EU-based service 📩 Contact us for availability, delivery time and a tailored offer. Ventis TITAN 550 is built for customers who require maximum space, precise airflow control and reliable heating as standard.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total height: 3,450 mm, total length: 7,000 mm, total width: 5,400 mm, volume flow: 30,000 m³/h, type of input current: three-phase, overall weight: 3,200 kg, working width: 2,750 mm, warranty duration: 12 months, workpiece weight (max.): 3,500 kg, inner dimension height: 2,750 mm, inner dimension length: 6,900 mm, load capacity: 3,500 kg, inner dimension width: 3,900 mm, heating capacity: 290 kW (394.29 HP), filter area: 25 m², power: 18 kW (24.47 HP), Equipment: cabin, documentation/manual, emergency stop, lighting, ⭐⭐⭐⭐⭐ Ventis Nexus 300 – Professional Automotive Spray Booth Reliable. Efficient. Built for Daily Workshop Use. ⚡ Professional full downdraft spray booth for body shops and refinishing centers ⚡ Engineered for stable airflow, clean working conditions, and optimized operating costs ⚡ Designed and delivered in compliance with EU regulations 🔑 Key Advantages ✔ Full downdraft airflow – consistent paint quality and excellent overspray control ✔ Direct-drive (DDF) fans with VFD control – lower energy consumption and maintenance ✔ Stable airflow in all operating modes ✔ Insulated sandwich panel construction – thermal stability and noise reduction ✔ Designed for intensive daily professional use 🌬️ Airflow Concept – Full Downdraft The Nexus 300 operates in a full downdraft configuration. Clean, filtered air is supplied through a full-surface ceiling plenum and evenly directed downward through the working zone. Contaminated air is extracted via a high-efficiency exhaust system, ensuring: uniform airflow reduced dust contamination high-quality paint finish 🔧 Fans & Airflow Control Airflow is generated by high-efficiency direct-drive (DDF) fans, digitally controlled via variable frequency drives (VFDs). Benefits: precise airflow regulation reduced energy consumption lower noise levels no belts = reduced mechanical wear and downtime 🧱 Construction & Insulation Insulated EPS-core sandwich panels for energy-efficient operation Roof made of corrosion-resistant galvanized steel Durable construction suitable for demanding workshop environments 🔥 Heating System The Nexus 300 is equipped with an integrated heating system with a Riello RG5S burner, providing: uniform warm air distribution stable curing conditions reduced drying times 🎨 Operating Modes ✔ Painting mode – full downdraft airflow for clean application ✔ Drying mode – regulated airflow and temperature for efficient curing Giedpfxsx Tc Dxe Aa Ijl 🧼 Filtration System Ceiling-mounted intake filtration with diffusion media High-efficiency exhaust filters capturing overspray and airborne particles Clean exhaust air before discharge 🚪 Doors, Lighting & Access Four-leaf glazed aluminum front doors – wide access and excellent visibility Side technical service doors for maintenance Integrated LED lighting for bright, uniform illumination 📐 Dimensions & Technical Data Internal dimensions: approx. 7,000 × 4,000 × 2,750 mm Airflow capacity: approx. 30,000 m³/h ➕ Optional Equipment 15" HMI touchscreen control panel Alternative insulation: PIR or mineral wool Integration with prep stations or mixing rooms Preparation for in-floor scissor lift 🚚 Delivery & Installation ✔ Manufactured to order or available upon request (8-10 weeks) ✔ Professional installation and commissioning across the EU ✔ Permit and documentation support included 🛡️ Warranty & Support ✔ Manufacturer warranty 12 months ✔ EU-based technical support and service 📩 Contact us for availability, delivery time, configuration options, and a tailored offer. We will be happy to advise you and prepare a solution adapted to your workshop.

Condition: good (used), Year of construction: 2016, functionality: fully functional, Topcoat line for leather, working width 1800 mm, with infrared dryer, air scrubber and chiller. Gijdpox S Er Nofx Aa Ijl

Condition: used, Year of construction: 2003, functionality: fully functional, Wet Paint Coating System KRAUTZBERGER SPRITZTECHNIK incl. Coalescence Unit RODAP SR 185, Year 2003 Used wet paint coating system for surface finishing of metal parts (including decorative fittings/series parts). The system consists of the spraying technology by Krautzberger as well as a coalescence/separation unit RODAP SR 185 for processing/separating (e.g. overspray/mist extraction, depending on configuration). The scope of delivery also includes spray trolleys and various suspension racks for flexible part handling and series production. Gsdpfx Ajx Sqtroa Isil Application area: Wet painting / spray coating of metal components and assemblies. Scope of delivery: Krautzberger spray technology + RODAP SR 185 + spray trolleys + various suspension racks. Inspection: by appointment (electrically connected possible by arrangement). Dismantling/loading: by purchaser or as agreed.

Condition: excellent (used), We are offering this very good professional spray booth Carmat, model GMD 110-V, equipped with heating up to 60 degrees and sprinkler extinguishing system, etc. If you have any questions or require more information, feel free to send us a message or call us. The machine is located in Brussels. Gisdpfjx Ryxzox Aa Iel

Condition: used, Year of construction: 2001, functionality: unexamined, Painting line for sale to be dismantled: See attached document. The painting line consists of: - Powerwash – Washing line. - Water treatment devices. - Water drying oven. - Two painting chambers - Two robots – ABB 580 - Paint control machine Magu MST 2200 2-K - Paint control unit Grago Promix PD2K Automatic - Two paint drying ovens. - Two air-drying ovens - Conveyors. The entire line will be dismantled within the next 4 months. Equipment will be sold individually or as a complete package. Offers will be considered. Gijdpfx Aaox Igfpe Isl

Condition: used, Year of construction: 2003, functionality: fully functional, total height: 4,000 mm, total length: 7,100 mm, total width: 8,100 mm, temperature: 80 °C, heating capacity: 116 kW (157.72 HP), Equipment: cabin, Complete wet paint installation with prep area, wet paint booth, mixing room, drying oven, and finishing zone. The installation can still be inspected in Diest. More details in the attachment or upon request. Giodpfox H Rhrox Aa Iol - Dimensions: LxWxH = 8,100 x 7,100 x 4,000 mm (external) and 8,000 x 7,000 x 3,950 mm (internal). - Height to underside of rail = 3,740 mm measured from floor level. - With a shared sliding door with the spray booth. - Sliding doors as oven exit door: WxH = 1,200 x 3,800 mm, equipped with 1 window, 2 panels. - Emergency door with window in side wall: WxH = 800 x 1,900 mm, self-closing with door closer and latch. The emergency door is fitted with sealing rubbers, large in diameter and highly elastic EPDM quality. - Wall type: vertical double-walled sandwich panels filled with mineral wool, thickness 55 mm. Includes lighting, ventilation unit, control panel, and a complete monorail system in front of and throughout the installation up to the finishing zone.

Condition: used, Year of construction: 2018, functionality: fully functional, Punching machine, barely used, weight: 8500 kg. Lot includes steel cabinet with contents. Contents consist of tooling, spares and miscellaneous small parts. Giodpfx Aaexzpvus Iel

Condition: used, Year of construction: 1999, 1999 CM System D8 Overhead conveyor (painting chain) for handling chairs or similar products, dyed on hooks. 600 linear meters. Complete system with 2 rotating disc cups, electrical panels, hooks, various equipment as shown in the photo. Towing group: n.2 medium-sized Caterpillar motorized groups Working speed: min/max 0:9 m/min Motor power: HP 2 + HP 2 D8 chain development and d. 37 rollers: 600 meters Gedpfoxywniex Aa Ioil Straight track to measure: 531 meters 90° horizontal bends r= 500 mm: 91 pieces Horizontal curves at 30° r=500: 6 pieces 30° vertical curves r=500: 26 pieces Hook step: 0.80 m

Condition: like new (used), Year of construction: 2016, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 20700114-2016, year of last overhaul: 2025, Equipment: documentation/manual, Piston pump for sale due to surplus. It was only used to spray four front doors with water-based high-build coating, so it is practically as new! Without spray gun. Giodpfxjxyt T Uo Aa Ijl Service and spare parts are easily available from Hendrichs, Eupen or B&M.

Condition: used, Year of construction: 1999, 1999 CM System D8 Overhead conveyor (painting chain) for handling chairs or similar products, dyed on hooks. 80 linear meters. Gijdpfx Ajxyi Uuea Iol Towing group: lightweight Caterpillar engine Working speed: min/max 0:9 m/min Motor power: HP 2 D8 chain development and d. 37 rollers: 80 meters Straight track to measure: 72 meters 90° horizontal bends r= 500 mm: 10 pieces Hook step: 0.80 m

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 5,000 mm, total width: 3,500 mm, total height: 2,950 mm, inner dimension height: 2,650 mm, inner dimension length: 4,900 mm, inner dimension width: 3,400 mm, Equipment: cabin, Automotive Spray Booth The automotive spray booth is a fundamental device in paint repair technology. It enables painting operations to be carried out in safe and comfortable conditions while minimizing the negative impact on the surrounding environment and the workspace. Specifications: - External dimensions: 5000 (+ air handling unit 1350 × 2900 mm) × 3500 × 2950 mm - Entrance door: 3000 × 2600 mm (three-wing design) - Service door: 700 × 2000 mm - Structure: made of steel sheets - Heat exchanger: standard steel - Panels: steel panels with mineral wool insulation in the walls Cabin Wall Structure: - Thickness: 50 mm - Insulation: EPS polystyrene Godpfx Ajxnpczea Ioil - Color: white Cabin Base: - Cabin mounted directly on floor/concrete surface Double Ceiling: - External ceiling paneling - Full-surface plenum chamber for air supply Air Exchange System: - Supply system: - Jet turbine 4 kW – 2 units - Airflow capacity: 26,000 m³/h - Airflow system: - Jet turbine 5.5 kW – 1 unit - Airflow capacity: 18,000 m³/h Lighting: - 8 side-mounted lamps - Ceiling lighting: 24 LED tubes Air Heating System: - Single-stage oil burner Riello model 40 G20 - Burner control: manual - Heating time: 8–15 minutes Filtration System: - Double-layer filtration structure - High-capacity air purification system with filtration efficiency up to 99%

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 7,000 mm, total width: 4,000 mm, total height: 3,130 mm, inner dimension height: 2,700 mm, inner dimension length: 6,900 mm, inner dimension width: 3,900 mm, Equipment: cabin, The automotive spray booth is a fundamental device in paint repair technology, enabling painting work to be carried out in safe and comfortable conditions while minimizing the negative impact on the surroundings and the environment. Specifications: - External dimensions: 7000 × 4000 × 3130 mm - Internal dimensions: 6900 × 3900 × 2700 mm - Entrance door: 3000 × 2600 mm (three-wing design) - Service door: 640 × 1800 mm - Structure: standard steel - Heat exchanger: standard steel - Panels: EPS polystyrene - Total power: 7 kW - Installation: indoor only Cabin Wall Structure: - Thickness: 50 mm - Insulation: EPS polystyrene - Color: white Cabin Base: - Cabin mounted directly on floor/concrete surface - Installation possible only indoors Double Roof: - Upper external layer: corrugated steel panels - Inner structure: partially grated Air Circulation System (Supply System): - Jet turbine 5.5 kW – 1 unit - Airflow capacity: 20,000 m³/h - Belt-driven system - Air recirculation control: none Lighting (Side Lights): - 20 side-mounted lamps - No option for ceiling lighting Air Heating System: - Single-stage Riello G10 oil burner, 54–120 kW - Manual burner control - Heating time: approx. 20 minutes Cabin Access: - Main Doors: - Dimensions: 3200 × 2600 mm - Three-leaf door system - Service Door: - Equipped with a separate service door - Pressure locks installed Filtration System: - Air intake: Pre-filter - Ceiling filter: Main high-flow filtration Filter Specifications: - Weight: 600 g/m³ - Thickness: 50 mm - Airflow: 900 m³/h Gijdoxnbf Uopfx Aa Isl - Capture efficiency: 97% - Air velocity: 0.25 m/s - Dust holding capacity: 650 g/m³ - Max temperature: 100°C - Filtration class (EN 779): M5 - Fire resistance (DIN 53438): F1

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,850 mm, total length: 12,125 mm, total width: 5,150 mm, overall weight: 8,000 kg, warranty duration: 12 months, inner dimension height: 5,000 mm, inner dimension length: 12,000 mm, inner dimension width: 5,000 mm, Equipment: cabin, lighting, PAINT BOOTH 12x5x5M EZ Series Model: - LED ceiling lighting - LED side lighting - RIELLO oil burner - Four fans, including: ‎ ㅤ- 2x supply fans ‎ ㅤ- 2x exhaust fans TECHNICAL PARAMETERS: - External dimensions: 12125x5150x5850 mm - Internal dimensions: 12000x5000x5000 mm - Entrance doors: 4000x4800 mm (2 units, four leaves, reinforced hinges) - An additional BOX 1650 mm x 8000 mm should be included in dimensions – can be placed on either the right or left side. - Structure: galvanized steel frame - Heat exchanger: high-grade stainless steel - Panels: filled with mineral wool insulation - Drive-on ramps – 2 units - Fully grated floor The reinforced frame construction prevents vibration and the air surge effect from the main supply duct. Double Roof Design: - Upper outer layer - Inner truss structure with V600 ceiling filter Air Circulation System: - Supply system: Jet turbine 7.5 kW – 2 units - Exhaust system: Jet turbine 7.5 kW – 2 units Air Filtration System: - Pre-filter collects particles larger than 10 μm - Ceiling filter collects particles larger than 5 μm - Floor filter: Paint Stop - Carbon filter Lighting: - Ceiling lights: 52 LED tubes (14 angled fixtures with 4 tubes each) - Side lighting: 26 LED panels integrated into the right, left, and rear walls Burner: Riello – 2 units, oil model 40 G20, approx. 200,000 Kcal/h - Heat exchanger: high-quality stainless steel - Heating time: 8–15 min (max. 80°C) Optional Features: - Roof-mounted boxes - Insulated roof Gijdpfxoxm U Exs Aa Iol - Pass-through doors - Water curtain - Color according to RAL palette - Explosion-proof (EX) version available

Condition: excellent (used), functionality: fully functional, Complete equipment for an industrial paint shop: - dry wall with extraction system and filters. The paint shop was used for painting window frames. Giedexmr Tyopfx Aa Iol

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. Giodsxa H Ewjpfx Aa Iol (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Condition: new, Powder Coating Systems Gijdpsxa Hzxofx Aa Iol For years, powder coating has been continuously evolving as an alternative to wet painting, and it has recently gained increasing importance due to its lower environmental impact—specifically the absence of solvents and paint sludge. Powder recovery further boosts the efficiency of these systems to a particularly high level. For users, powder coating offers the advantage of creating an extremely durable and corrosion-resistant surface that is significantly more impact-resistant than what traditional painting can achieve. Additionally, post-processing tasks such as grinding or drilling the powder-coated parts present no problems, as the coating will not chip off. Pony Luxury Coating powder coating systems provide you with tangible advantages: they are efficient, environmentally friendly, and—as always—unsurpassed in flexibility. We achieve this through a range of system types. Manual Powder Coating Systems Manual coating systems are the ideal solution for complex and demanding workpieces. Thanks to skilled operators, these systems offer continuous adaptation to changing conditions and varying product sizes. Flexibility is paramount—with the added benefit of an attractive entry price into the world of powder coating. Large-Scale Powder Spray Booths No matter how large or challenging your workpieces, our systems are larger! In the commercial vehicle and utility sector, where components are exposed to significant stress, powder coating has established itself as the ideal solution. To accommodate ever-larger components, we offer our large-scale powder booth, which supports unlimited manual coating, and, when combined with a conveyor system, handles any workpiece size with ease. Automatic Powder Coating Systems If your operation requires high throughput and rapid processing, an automated powder system is the way forward. Coupled with a conveyor, light barriers allow precise detection and, consequently, exact powder dosage to ensure maximum efficiency. The system can also be equipped with lifting stations and robots to handle even the most complex components. Powder Curing Ovens & Flash-Off Dryers These provide the perfect finishing touch to powder coating: the curing oven. Our ovens feature the highest insulation class, ensuring consistent, high efficiency. Detailed temperature control also enables use as a flash-off dryer to dry substrates after pre-treatment. Temperatures up to 250 degrees Celsius are possible, which allows usage as a tempering oven, for instance with hot-dip galvanized materials. Of course, typical use as a powder curing oven is straightforward. Optimal air distribution and a visualized control panel prevent over-baking, and even allow multiple color shades to be cured in a single process. Do you have questions or suggestions? We are happy to assist you!

Condition: new, Equipment: cabin, Stationary small parts spray booth Dixi █████ Achieve perfect and uniform coating of small parts. The extraction system ensures optimal results even in the smallest spaces. Optionally equipped with a turntable or a wheel holder, as well as a compact yet powerful extraction unit, it is perfectly suited for processing small workpieces and wheels. The side panels effectively limit the distribution of overspray, allowing work to be carried out in confined spaces without contaminating surrounding areas. Integrated lighting is also available as an option. Additionally, thanks to its low weight and minimal connections, the booth can be relocated to a new site in no time, ensuring your flexibility at all times. The system comes fully pre-assembled and ready for immediate use. Your Benefits Thanks to its compact design, flexible dimensions, and versatile accessories, this booth offers a broad range of applications. The sophisticated modular system requires minimal space and is therefore suitable for use in virtually any premises. Different filter media and stages enable highly efficient operation, while filter changes can be performed in just a few minutes. Application and Safety Gijdpfx Aajxa Hx Rs Iol Processing of both water-based and solvent-based coating materials is enabled by the use of ATEX-certified explosion-proof motors. It can also optionally be used for spraying adhesives. The large filter surface ensures uniform extraction throughout the process.

Condition: used, Year of construction: 2024, Please find attached information about our powder coating and wet painting line, which we established last year in the Izmir Free Trade Zone. The facility is designed for bicycle painting. The dimensions are 680 × 680 × 2100 mm (L × W × H). Plant components: 1. 5-stage pretreatment washer, 2-stage plate heat exchanger, and heated stainless steel sheet 316 1.1. Water drying tunnel with reversing function, 135 m 1.2. Control panel 1.3. Medium-duty overhead conveyor 2.1. Label curing oven and conveyor belt, 75 m 2.2. Labeling area with air-conditioned roof and conveyor belt 3.1. Powder coating system, 135 m 3.2. Powder curing oven with 2 reversing functions 3.3. Powder spray booths not included; two Wagner powder spray booths 3.4. Medium-duty overhead conveyor 4.1. Wet painting system 4.2. Powder coating oven 4.3. Wet spray oven 4.4. Exhaust ventilation Giedpjxa Expefx Aa Isl 4.5. Four wet paint spray booths 4.6. Two air-conditioned mixing rooms 4.7. 290 m conveyor belt 5.1. Label application system, 90 m 5.2. Air-conditioned area in the roof The facility cost €2,800,000.00 as new. This is a fully automatic powder and wet paint line. Individual components can also be purchased. If you are interested, please do not hesitate to contact us.

Condition: good (used), Airless sprayer, painting device, spray pack, paint sprayer, paint spray system, paint pump, electrostatic sprayer, airless complete system, pneumatic piston pumps, airless high-pressure pump, air motor, AIR MOTOR -Manufacturer: Wagner, Airless sprayer type: 33-70 with transport trolley and spray gun -Material flow: max. 12.6 l/min Giedpjw U T Atofx Aa Iel -Air inlet pressure: max. 8 bar, operating pressure max. 264 bar -Individual components: see photos -Dimensions: 830/680/H1140 mm -Weight: 50 kg