BoCoTech b.v.

Condition: good (used), Year of construction: 1999, Machine is used, in good condition. Guodpfxez Arlze Adtsg Parts shown by hand not come.

Condition: good (used), Eckold tool Gusdsz Arlnepfx Adtog ECKOLD - WT 100T MACH-ID 9694 Make: ECKOLD Type: WT 100T Year: 2018 Type WT 100 T / NFW Forming method Planishing and calibrating Special features Exchangeable inserts suitable for Finishing with custom-shaped tools Sheet thickness Steel (Rm = 400 mm2) 3.0 mm Sheet thickness Stainless steel (Rm = 600 mm2) 3.0 mm Sheet thickness Al (Rm = 250 mm2) 3.0 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 91128554, Year of construction: 2018, operating hours: 1,440 h, load capacity: 1,400 kg, lifting height: 4,550 mm, mast type: triplex, construction height: 2,200 mm, fork length: 1,150 mm, No minimum price – guaranteed sale to the highest bidder! The forklift truck is in very good technical and visual condition. The tires have been replaced, and a battery service was performed in June 2026. TECHNICAL DETAILS Load capacity: 1,400 kg Lifting height: 4,550 mm Godpfxsz Arlbj Adteug Fork length: 1,150 mm MACHINE DETAILS Mast type: Triplex Drive: AC Battery type: 48V 4EPZS 620 Battery capacity C5: 620 Ah Number of cells: 24 Acid volume: 153 l Front wheels: Pneumatic tires, size 1x BA Three new wheels installed in May 2026 Control type: Standard joystick Operating hours: 1,440 h Motor power: 6.0 kW Battery service: June 8, 2026 Battery load test result: 72% (Result see attachment of the advertisement) Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,270 x 2,200 mm Own weight without battery: 2,105 kg Battery weight: 935 kg Total weight with battery: 3,040 kg EQUIPMENT Battery charger (Model: SLT150, Year of manufacture: 2018) Operator protective roof

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1997, Haul-Off, used Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Pulling force: approx. 40,000 N Tread width: 300 mm Passage width: max. 500 mm Passage height: appr. max. 200 mm Effective contact length: 2400 mm Haul-off speed: stage 1: 0,5 - 4,0 m/min., stage 2: 1,0 - 8.0 m/min. Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Guodpfsz Ark Rsx Adtjg Weight: approx. 3000 kg Condition: recondition and checked for function

Condition: good (used), ECKOLD R 320 is a specific forming tool specially designed for use with an Eckold Kraftformer Godpoz Arkqofx Adteug Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, TECHNICAL DETAILS CONTROL Control system: Heidenhain iTNC 640 Gedez Arkkepfx Adtsug TRAVEL RANGES Travel range X-axis: 1,600 mm Travel range Y-axis: 800 mm Travel range Z-axis: 800 mm Rapid traverse X-axis: 32 m/min Rapid traverse Y-axis: 32 m/min Rapid traverse Z-axis: 32 m/min TABLE AND WORKPIECE Table length: 1,700 mm Table width: 800 mm Workpiece length max.: 1,700 mm Workpiece width max.: 800 mm Workpiece height max.: 800 mm Workpiece weight max.: 1,500 kg SPINDLE Number of spindles: 1 Tool holder: SK 40 Clamping diameter: 40 mm Spindle motor power: 37 kW Torque: 235.5 Nm Spindle speed: 1–10,000 rpm Speed control: stepless Air supply through the spindle: available TOOL CHANGER Tool magazine capacity: 60 Tool changer: accessible from the front COOLANT Internal cooling: 20 bar Filter unit: strip filter unit MACHINE DETAILS ELECTRICAL SYSTEM Input voltage: 380 V Input current type: three-phase DIMENSIONS AND WEIGHT Overall length: 5,800 mm Overall width: 4,300 mm Overall height: 3,000 mm Footprint width: 4,300 mm Machine weight: 15,000 kg OPERATIONAL DATA Operating hours: 2,509 h Date of operating hours: 15.09.2026 Initial commissioning: 24.01.2024 EQUIPMENT CE marking Chip conveyor Documentation/manual Glass scales in all 3 axes Hexagon 3D infrared probe system Mobile electronic handwheel Internal cooling with 20 bar and strip filter unit Air supply through the spindle Tool changer with 60 positions, accessible from the front

Year of construction: 2018, condition: ready for operation (used), Work piece handling system manufactured in 2018. This TOP Automazioni Top Loader ETL 10-75 has a total weight of 2500 kg. If you are looking to get high-quality handling capabilities, consider the TOP Automazioni Top Loader ETL 10-75 machine we have for sale. Contact us for further details. Gusdpfx Adoz Arkdotsg - Total Weight: 2500 kg

Condition: new, Year of construction: 2026, machine/vehicle number: YC27-200T, functionality: fully functional, pressing force: 200 t, stroke length: 180 mm, operating speed: 8 mm/s, reverse speed: 140 mm/s, table width: 940 mm, table length: 740 mm, table height: 750 mm, throat depth: 400 mm, overall weight: 14,000 kg, Equipment: CE marking, documentation/manual, Digima YC27-200T Single-Column Press Hydraulic C-frame press with a 200-ton capacity for metal forming. The Digima YC27-200T is a modern, hydraulic single-column C-frame press designed for a wide range of metal forming processes. This machine is suitable for cutting, blanking, bending, light stamping, straightening shafts, and processing components requiring very high clamping forces. The C-frame design provides convenient access to the work area from three sides, facilitating material handling, workpiece positioning, and tool changes. The welded steel frame ensures high rigidity, minimizes deformation under load, and supports process repeatability. Key Advantages Why choose the Digima YC27-200T press? 200-ton capacity — very high working force for blanking, bending, stamping, and straightening components. C-frame design — access to the work area from three sides simplifies operation and tool changes. Welded steel frame — high rigidity, reduced deformation, and stability under load. Integrated valve block — compact hydraulic system design and rapid machine response. Fully enclosed drive — increased work safety and easier machine maintenance. Intuitive operation — lever-pedal system and control panel support comfortable operator use. Applications Where will the YC27 hydraulic press be useful? The Digima YC27-200T single-column press is designed for use in production facilities, tool rooms, maintenance departments, and industrial workshops where high clamping forces, convenient workpiece positioning, and a repeatable work process are required. Bending and forming — processing metal components using appropriate tooling. Blanking and cutting — working with parts requiring high, controlled clamping force. Light stamping — application in metal component forming processes. Straightening shafts and components — correction of machine components and technical parts. Tool rooms — assembly, fitting, testing, and servicing of production tools. Industrial production — repetitive operations with stable and safe working conditions. Technical Specifications: Model: YC27-200T Machine type: Hydraulic single-column C-frame press Nominal capacity: 2000kN/200ton Guodpoz Ari Tefx Adtsg Motor power: 18.5kW Maximum system pressure: 25MPa Stroke adjustment: 10-180mm Maximum slide stroke: 180mm Maximum mounting height / clearance: 80-380mm Table height from the ground: 750mm Slide dimensions: 770x580mm Table opening: 250mm Mounting hole: Ø70 mm Throat depth / outreach: 400mm Fast descent speed: 21 mm/s Working speed: 8mm/s Return speed: 140mm/s External machine dimensions: 1800x2100x3600mm Machine weight: approx. 14000kg Type: Press Brand: Digima Condition: New Main application: Cutting, blanking, bending, light stamping, straightening shafts and components.

Condition: new, Year of construction: 2013, This steam coil was ordered for a dryer made by Imesa. Gujdpfxsz Ari Hs Adtog The coil is new. Dimensions: 48 x 42 x 25.5 cm Connections: 1 inch The coil has a value of 2600 euros.

Condition: reconditioned (used), Year of construction: 2021, operating hours: 297 h, working width: 510 mm, area performance: 2,300 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, Hako Scrubmaster B45 CL TB510 Scrubber-Dryer New SIAP 12V 105Ah gel batteries (2x) 2021 model year; 297 operating hours 510mm cleaning head (TB510) equipped with a new medium-stiffness disc brush, suitable for use on any surface Gujdpjz Aritefx Adtog New polyurethane squeegee blades, resistant to oils, greases, and petroleum-based substances. Built-in battery charger and wheel drive facilitate daily operation New splash guard around the brush head prevents water from spraying outside the machine's footprint Equipped with a new, durable drain hose and suction hose New suction motor ensures high water extraction power from the squeegee Each unit we offer features individually taken photos; you are buying the exact machine shown TECHNICAL DATA: Supply voltage: 24 V Brush working width (mm): 510 Squeegee working width (mm): 860 Theoretical coverage (m²): 2300 Brush speed (rpm): 210 Tank capacity (l): 42/42 Weight ready for operation (kg): ~230 Power (kW): 1.31 INCLUDED: NEW SIAP 12V 105Ah Gel Batteries (2x) NEW 24V 400W suction motor NEW 510mm PPL 0.5 disc brush NEW suction hose NEW drain hose NEW brush head splash guard Squeegee assembly with new oil-resistant blades Built-in battery charger Tenzi Normal fluid (5 liters) – FREE KEY FEATURES: 42-liter tank capacity allows for a large volume of cleaning solution, minimizing the need to stop work for refills The machine's design ensures excellent maneuverability. A tight turning radius allows for operation in narrow passageways and aisles. The parabolic squeegee ensures thorough suction of the solution from the cleaned surface. A wide working width (510 mm) ensures high area coverage. A highly legible and intuitive control panel.

Condition: new, Year of construction: 2021, Marel MS2610 Pinbone Remover High-quality pinboning Gujdpez Arimefx Adtjg The MS 2610 Pinbone Remover is a lighter version of our well-known standard pinboner, the MS 2612. It is designed according to the same principles, ensuring high-quality pinbone removal, and it can operate at the same speed as the MS 2612 to deliver maximum capacity. Manual adjustments Three pre-set speeds are available, allowing the pinbone roller to adapt to the varying condition of the fish. The pressure of the pinbone heads can be easily adjusted using a weight bar. The MS 2610 is available as a single-lane and dual-lane machine. Fast and accurate The MS 2610’s unique combination of accuracy and speed results in high yield and output, with the best pinboning quality often achieved at a belt speed of 4-5 m/min. Up to 18 fillets per minute, per lane Three pre-set speeds for the pinbone roller Quick-release system on conveyors Manufacturer: Marel Model: MS2610.10 Year: 2021 (new) Production hours: 0 Capacity: Up to 18 fillets/minute * Power: 0.4kW Machine dimensions L x W x H: 1,650 x 710 x 1,900 mm Machine weight: 180 kg.

Condition: good (used), Year of construction: 2012, overall weight: 55 kg, total height: 120 mm, total length: 490 mm, total width: 125 mm, Metal cutting Tooling GRESSEL - Duogrip 125mm MACH-ID 9710 Gusdpfx Asz Arigodteg Make: GRESSEL Type: Duogrip 125mm Year: 2012 Length:490mm Width:125mm Height:120mm Weight:55kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1984, condition: refurbished (used), functionality: fully functional, drive type: V-snaren, Motor: 55 kW - 1500 RPM Gjdoz Arh Nepfx Adtoug Tread die: 85 mm Die diameter: 362 mm Equipped with a cut-off knife on the door Weight: 1440 kg 1 year warranty

Year of construction: 2013, condition: ready for operation (used), Smipack BP800AS Monoblock automatic shrink wrapper with an inline infeed and a pneumatic sealing bar Maximum Output: Up to 12 packs per minute (ppm) Sealing Bar Size: 760 mm Product Maximum Height: 380 mm Maximum Pack Length: 1200 mm Gujdez Arh Aepfx Adteg Maximum Film Reel Size: 750 x Ø 350 mm Max film width: 750 mm Advised Film: LDPE 20 – 100 µ Power Supply: 220–240 V / 380–415 V (3PH + PE / 3PH + N + PE, 50/60 Hz) Installed Power: 17,180 W Air Pressure: 6 Bar Required Air: 13 Nl/p (normal liters per pack) Machine Net Weight: 625 kg Machine Dimensions: 2840 x 1410 mm (Height: 2105 – 2265 mm) Key Features FLXMOD® control system with a 7-inch full-colour touch screen and PLC.Memory Can store up to 50 different working cycles. Tunnel Conveyor: Built with heat-resistant glass fiber bars that support up to 30 kg and prevent rust. Infeed: Motorized upper and lower film unwinding with inverter-controlled adjustable speed.

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutting -Manufacturer: Alrowa, thread cutting head with Strehler jaws -Type: No6 -inch thread: 1 1/2 - 3" Godjz Arhvspfx Adteug -Accessories: incl. 3 sets of Strehler jaws, see photos -Dimensions: 950/200/H150 mm -Weight: 15.7 kg

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 2,950 h, empty load weight: 6,700 kg, Manufacturer: JLG Model: 400S Year: 2015 Gusdpfx Adjz Arhpotjg Capacity: 270 kg Operating hours: 2,950 h Max. working height: 14.19 m Max. platform height: 12.19 m Own weight: 6,700 kg

Condition: excellent (used), overall weight: 32 kg, total height: 125 mm, total length: 430 mm, total width: 130 mm, Metal cutting Tooling Guodpfez Arhiex Adtjg HILMA - TYP 125 MACH-ID 9714 Make: HILMA Type: TYP 125 Length:430mm Width:130mm Height:125mm Weight:32kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, digging bucket width: 1,400 mm, 2 cubic meters, approximately, deep bucket Manufacturer: BSG Bucket with teeth and cutting edge. Guodez Arhcspfx Adtjg

Condition: defective spare-parts repository (used), functionality: not functional, Year of construction: 2010, operating hours: 2,580 h, load capacity: 800 kg, lifting height: 1,000 mm, fuel type: electric, mast type: mono, battery capacity: 620 Ah, battery voltage: 24 V, fork length: 1,200 mm, total length: 2,950 mm, total width: 800 mm, fuel: electricity, STILL EK-X 790 – High-level order picker TECHNICAL DATA Lifting capacity: 800 kg Lifting height: 1.000 mm Mast: Mono (1S100) Fork length: 1.200 mm Drive: Elektro 24V Battery: 24 V/620 Ah (2009) Charger: Ohne/without Length: 2.950 mm Width: 800 mm Year of manufacture: 2010 Operating hours: 2.580 h Gjdpfx Adoz Arg Sotoug Condition: not ready to drive Internal no.: 1309089 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: 2021xxx, Model UR10e – year 2021 – showroom item, like new. Robot weight: 28 kg Guedpjz Argxofx Adteg Payload: 10 kg Maximum reach: 130 cm Certification: IP54 Average power consumption: 400 W Repeatability: ±0.5 mm Linear speed: 1 m/s Force sensor: integrated Price: €15,900.00 + VAT

Condition: good (used), functionality: fully functional, Year of construction: 2016, operating hours: 3,379 h, Manufacturer: GSR Model: E200T Comfort X Year: 2016 Capacity: 250 kg Mileage: 43,416 km Operating hours: 3,379 h Working height: 20.2 m Gusdpfez Argrex Adtsg Max outreach: 13.0 m

Condition: good (used), functionality: fully functional, Year of construction: 2017, operating hours: 296 h, empty load weight: 7,400 kg, Manufacturer: Genie Type: Z45/25 J BI Year: 2017 Capacity (t): 227 kg Hours: 296 h Gusdpjz Aq Rcofx Adteg Working height: 15.94 m Platform height: 13.94 m Horizontal reach: 7.65 m Weight: 7,400 kg

Condition: used, mileage: 96,500 km, power: 115 kW (156.36 HP), first registration: 09/2021, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 04/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Storage compartment on dashboard with USB port, audio system: digital audio system (DAB) with USB and Bluetooth hands-free, rear door (opening angle 260 / 270 degrees), automatic climate control, cargo partition wall with window, steering column (steering wheel) height and length adjustable, reversing aid with sensors, front and rear mud flaps, telematics system preparation (telematics box) Gusdpfx Asz Aq T Djdtjg Additional equipment: Traction control system (ASR), model: S-series, exhaust pipe lateral left, exterior mirrors electrically adjustable and heated, brake assist, interior roof light in cargo area, electronic brake-force distribution, driver assistance system: hill start assist (AAS), rear axle suspension: parabolic springs, front axle suspension: transverse leaf spring, tinted windscreen and side windows, 210 A alternator, speed limiter system 160 km/h, urea tank (AdBlue): 20 L, body/superstructure: high-roof van with extended rear overhang, fuel tank: 70 L, engine 2.3 L – 114 kW diesel, wheelbase 3520 mm, low-emission according to Euro 6d-TEMP standard, sliding door right side (cargo/passenger compartment), cab seats: dual passenger bench, maintenance indicator, gross vehicle weight 3.50 t Vehicle is in good condition! 2 units available! Financing possible via Santander Bank

Condition: used, mileage: 189,000 km, power: 140 kW (190.35 HP), first registration: 08/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 6,500 mm, total width: 1,950 mm, loading space length: 3,280 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Towbar: Wiring for trailer socket, extended exterior mirror arm left/right, MBUX multimedia system (7" touchscreen), spare wheel with road tyres, spare wheel holder under rear frame incl. jack, cabin seats: comfort passenger seat, cabin seats: comfort driver's seat, jack. Additional equipment: Overhead storage compartment above windscreen, storage compartment below dashboard on passenger side, rear tow hook, adaptive brake light, driver's airbag, hill-start assist, traction control system (ASR), washer fluid level indicator, electrically adjustable and heated exterior mirrors (both sides), outside temperature display, brake assist, cabin roof lining, automatic driving light activation, electronic brake force distribution (EBV), driver assistance system: Crosswind Assist, body/chassis: standard flatbed, Keyless-Start, communication module (LTE) for digital services, fuel tank: main tank 71 litres, steering wheel (mechanically adjustable steering column), headlight range adjustment, truck registration, side marker lights, Mercedes-Benz emergency call system, engine 3.0 litre - 140 kW CDI CAT, wheelbase 4325 mm, low-emission according to Euro 6, seat belt system with warning device (driver's side), seat covers/upholstery: fabric, steel wheels 6.5x16, AGM battery 70 Ah, ASSYST maintenance interval indicator, heat-insulating glazing, permissible gross weight 3.50 t. Gedoz Aq Syepfx Adtsug Cargo area length: 3.28 meters Payload: 1000 kg Wheelbase: 4.35 meters The vehicle is in very good condition!

Condition: used, mileage: 143,000 km, power: 132 kW (179.47 HP), first registration: 06/2022, fuel type: diesel, overall weight: 5,100 kg, next inspection (TÜV): 08/2026, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 8,060 mm, total width: 2,310 mm, total height: 3,100 mm, loading space length: 5,520 mm, loading space width: 2,200 mm, loading space height: 2,400 mm, Equipment: air conditioning, central locking, soot filter, Fiat Ducato chassis cab with tandem axle, 3 axles total * Power steering Gujdpfx Adjz Aq S Hetog * Partition wall * Central locking Speed control: Cruise control Air conditioning Parking assist: Rear Large rear tailgate Load compartment interior dimensions: L 5.52 x W 2.20 x H 2.40 meters Payload: 2100 kg Lowerable rear section The vehicle is in TOP condition!