Uz

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand finishing machine, the “Canon Multifunction Pro Puncher B1” Item for sale: 1 x Canon Multifunction Pro Puncher B1 Condition: Gjdpfx Adoz Aqy Rotjug This is a second-hand machine, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: good (used), Year of construction: 2018, overall weight: 50 kg, total length: 830 mm, total width: 180 mm, total height: 150 mm, Make: CERAZIZIT Type: CORALINE HDG-2 Gujdpfx Aoz Aqy Dodtsg Year: 2018 Length:830mm Width:180mm Height:150mm Weight:50kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Koppens PR400 Breading Machine Gedpfx Aoz Aqywedtoug The Koppens PR 400 breading machine is ideal for food companies looking to optimize the breading process for their products. Thanks to its robust design, this machine ensures even and uniform breading, guaranteeing consistent quality for every product processed. In fact, it is perfectly suited for fine breading, meeting the exacting requirements of the meat, fish, and other food processing industries. Furthermore, the Koppens PR 400 offers remarkable flexibility with its adjustable speed and working height, enabling parameters to be adjusted according to specific production needs. With its 400 mm wide belt, it facilitates the continuous processing of large quantities of product, increasing production line efficiency. Moreover, its stainless steel design ensures long life and impeccable hygiene, which is essential in food environments. Finally, this breading machine is easy to integrate into existing production lines, offering a complete solution for optimizing the breading process while guaranteeing high-quality results. In short, the Koppens PR 400 is an essential choice for improving the productivity and quality of breaded products. Manufacturer: Koppens Model: PR400 Belt width: 400 mm Capacity: Max. 1,000 kg/h (depending on the product) Power: 0.9 kW / 50 Hz Machine dimensions L x W x H: 3,150 x 800 x 2,050 mm Machine weight: 300 kg.

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 3,178 h, empty load weight: 16,095 kg, Manufacturer: Manitou Type: MRT 2150 Privilege Year: 2010 Capacity (t): 4,999 kg Hours: 5,070 h Mileage: 3,178 km Gedpfx Adoz Aqyqjteug Lift height: 20.60 m Weight: 16,095 kg Ground clearance: 0.37 m

Condition: used, machine/vehicle number: 42412110002654, mileage: 288,139 km, power: 70 kW (95.17 HP), first registration: 01/1980, empty load weight: 5,850 kg, overall weight: 6,800 kg, Year of construction: 1980, operating hours: 7,215 h, Equipment: crane, For sale: Used UNIMOG 1000 with Atlas AK1402 loading crane • Internal number: i. K. • First registration: 01/1980 • Mileage: approx. 288,139 km • Operating hours: approx. 7,215 • Power: 70 kW / 95 hp • Unladen weight: 5,850 kg • Permissible total weight: 6,800 kg • Trailer load: braked 22,000 kg, unbraked 1,500 kg • Additional headlights • Exhaust pipe pointing upwards • 12 V electrical system • Auxiliary gearbox with working group • Auxiliary drive at the bottom • Vehicle plate • Flatbed: L: 148 cm x W: 190 cm x H: 40 cm Atlas AK1402 loading crane 1 hydraulic extension Load capacities: Gsdpfxsz Aqyks Adtjug 3.9 m – 1,030 kg 5.2 m – 770 kg This offer is subject to change. Errors and prior sale are reserved.

Condition: good (used), functionality: fully functional, Year of construction: 1994, Hydraulic Swivel Bending Machine Manufacturer: FASTI, Type: 212 – 20 – 6 Year of Manufacture: December 1993 / January 1994 Technical Data Manufacturer: Fasti Type: 212-20-6 Year of Manufacture: December 1993 / January 1994 Useful length: 2040 mm Gujdpfx Adoz Aqx Tjtog Sheet thickness: 6 mm Stroke: 500 mm Connected power: 12.42 kW Voltage: 400 V Number of phases: 3 Control voltage: 230 V AC // 24 V DC Rated current: 16.5 A Mains frequency [Hz]: 50 Installation dimensions: L 3.30 x W 2.80 x H 2.30 m Weight: approx. 6 t Equipment - Bending angle adjustment using a potentiometer and digital display - Sheet thickness adjustment (bending flange) using a push button and digital display - Controlled rear stop, 1000 mm with ball bearings, extendable to 1500 mm - 2 x sharp edge rails, 45° - 1 x sharp edge rail, 30° - Bending rails 16, 35, 10, 12, 15 mm - Gooseneck rail H 130 mm, segmented All information is without guarantee. The machine is characterized above all by its very simple operation. A demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 1995, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, 4-axis machine X-axis travel: 1000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Control system: Heidenhain TNC 426 Spindle nose: 100-700 mm Gujdpfxjz Aqx Hs Adtjg Work table: 1,080 x 580 mm Maximum workpiece weight: 550 kg T-slots: 7 T-slot width: 14 mm Tool magazine with: 36 positions Maximum tool weight: 8 kg Maximum tool length: 340 mm Machine weight (approx.): 6.2 t Space requirement (approx.): 4,790 x 5,330 x 2,905 mm

Condition: good (used), functionality: fully functional, Year of construction: 2012, operating hours: 2,774 h, construction height: 12,500 mm, Manufacturer: Genie Type: Z34/22 IC / 12-1697 Year: 2012 Guodpsz Aqxyofx Adtog Capacity: 227 kg Hours: 2,774 h Maximum working height: 12.50 m Maximum platform height: 10.50 m Maximum horizontal reach: 6.80 m

Condition: good (used), Tool holder, reamer, tool holder, machine reamers, reamer, reaming tool, dowel cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, tool holder Gsdpfx Ajz Aqxtjdtoug -Mounting bracket: Mount: MK3 3 pieces -Type: Cone Ø 16/14 mm 2 pieces / Ø 13/11 mm 1 piece -Price/Fee: complete -Transport dimensions: 265/85/H27 mm -Weight: 1.8 kg

Condition: used, functionality: fully functional, Year of construction: 2013, load capacity: 3,500 kg, Robust load beam for safely lifting and transporting heavy loads (up to 3,500 kg according to the manufacturer). The H-beam is ideally suited for use in workshops, warehouses, or construction sites. It has 4 attachment points that can be adjusted in increments along the working length of 3.0 m to 6.0 m (see photos). Technical data according to the manufacturer: - Beam type according to the manufacturer: H-beam according to EN 13155 TTS 3.5/6000-1200 H - Year of manufacture: 2013 - Load capacity: up to 3500 kg - Working length: 3000-6000 mm - Adjustment in increments: 100 mm - Working width: 1200 mm Guodez Aqxmopfx Adtsg I look forward to receiving your message if you require further information. - No guarantee, no warranty, no return or exchange. - Signs of wear, but fully functional. - Payment: Cash on collection/advance payment.

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 4,663 h, empty load weight: 14,500 kg, Manufacturer: Aichi Type: SP21 AJ / 12-4903 Year: 2008 Capacity (t): 227 kg Hours: 4,663 h Maximum working height: 23.00 m Maximum platform height: 21.00 m Gujdpfxsz Aqxgo Adtjg Maximum horizontal reach: 18.60 m Weight: 14,500 kg

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, X travel: 2000 mm Y travel: 500 mm Z travel: 500 mm Control: Siemens 840 D Feed rate – fine adjustment: 1-8000 mm/min Table size: 2120 x 500 mm Table load: 2000 kp Rapid traverse X-axis: 40 m/min Rapid traverse Z-axis: 20 m/min Tool holder: HSK 63 A Spindle speeds – stepless: 0-15000 rpm Spindle drive: 20 kW Spindle bearing diameter: 70 mm Guedpfx Aoz Aqxaodtog Tool diameter: 63 /126 mm Tool magazine: 40 pcs Weight: 12 t Total power requirement: 65 kVA - Equipment: chip conveyor

Condition: reconditioned (used), Year of construction: 2012, operating hours: 982 h, functionality: fully functional, working width: 510 mm, area performance: 2,000 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, Hako Hakomatic B45 TB510 scrubber-dryer New SIAP 12V 105Ah gel batteries (2x) Year of manufacture: 2012; 982 operating hours 510mm cleaning head (TB510) equipped with a new medium-stiffness disc brush, suitable for use on any surface New polyurethane squeegee blades, resistant to oils, greases, and petroleum-based substances Built-in battery charger simplifies daily operation New splash guard around the brush head prevents water from spraying outside the machine's footprint Equipped with a new, durable drain hose and a new suction hose New suction motor ensures high water pickup performance from the squeegee Each unit we offer features unique, actual photos; you are buying the exact machine shown TECHNICAL DATA: Supply voltage: 24 V Brush working width (mm): 510 Squeegee working width (mm): 860 Theoretical coverage (m²): 2000 Brush speed (rpm): 210 Tank capacity (l): 42/42 Weight ready for operation (kg): ~230 Power (kW): 1.31 INCLUDED: NEW SIAP 12V 105Ah gel batteries (2x) NEW 24V 400W suction motor NEW 510mm PPL 0.5 disc brush NEW suction hose NEW drain hose NEW brush head splash guard Squeegee assembly with new oil-resistant blades Built-in battery charger Tenzi Normal cleaning fluid (5 liters) – FREE KEY FEATURES: 42-liter tank capacity allows for a large volume of cleaning solution, minimizing work interruptions for refilling Guodpfx Aoz Aqw Nsdtog The machine's design ensures excellent maneuverability. A tight turning radius allows for operation in narrow passageways and aisles. The parabolic squeegee ensures thorough suction of the solution from the cleaned surface. A wide working width (510 mm) ensures high area coverage. A highly legible and intuitive control panel.

Condition: used, Year of construction: 2012, Karmetal Prosaw Pro300- RFA Fully Automatic Horizontal Bandsaw, Cut Capacity 300mm Diameter. S/No. 221-34 (2012) Godpfx Adoz Aqw Aetsug Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: good (used), Year of construction: 2018, operating hours: 686 h, empty load weight: 2,235 kg, Manufacturer: Haulotte Type: Compact 10 Year: 2018 Capacity (t): 450 Working height: 10.15 m Hours: 686 h Platform dimension: 2.30 x 1.20 (m) Weight: 2,235 kg Gedpfxoz Aqwps Adteug Ground clearance: 0.13 m

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 2,000 kg, GF AgieCharmilles FORM 3000 VHP Year of manufacture: 2017 C-frame design, fixed table with lowerable tank Travel distances (X/Y/Z): 600 x 400 x 500 mm Distance table to quill: 200-700 mm Max. workpiece size: L x W x H = 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Integrated C-axis for rotation, indexing and erosion (U = 0-100 U/min) Pneumatic chuck (optional: Erowa/3R Systems) ISPG generator with 60 Amperes Best achievable surface roughness Ra 0.10 µm AGIEVISION 5 control interface 15” LCD color screen, mouse or touchscreen, jog wheel keyboard and hand control Includes CAPA electrode changer with 60 electrode positions Net weight of the machine: 5900 kg Guedpfsz Aqwiox Adtog Machine dimensions: 1790 x 2790 x 3110 mm After receiving your order, the machine will be cleaned, inspected, and thoroughly tested by us. We would also be happy to perform a customized test erosion for you. Optional: - Commissioning and training - Transport and installation - Cooling unit - Dielectric fluid

Condition: used, Colchester Triumph 2000 Gap Bed Centre Lathe with Acu-rite III 2 Axis DRO, Swing Over Bed 400mm Diameter, Distance between Centres 1300mm, 250mm 3 Jaw Chuck, Spindle 25 - 2000rpm, 3 Position QCTP. S/No. 6/0044/28919 Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Gsdez Aqwcspfx Adtsug Lot 12 of Auction 3500 - Ending Wednesday 30th September 2026 at 3pm (UK Time)

Condition: used, empty load weight: 3,155 kg, maximum load weight: 14,845 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2014, next inspection (TÜV): 09/2026, loading space length: 7,820 mm, suspension: air, tire size: 235/75R17,5, Equipment: ABS, GERMAN DEALER offers: Jumbo tandem trailer Galvanized 235/75R17.5 Twin tires BPW axles Drum brakes Spare wheel 3 storage boxes We have many trailers and interchangeable platforms in stock! ##### PLEASE CALL - NO EMAILS! ##### DELIVERY THROUGHOUT GERMANY IS POSSIBLE! MEPO COMMERCIAL VEHICLES HAS BEEN PROVIDING VEHICLES SINCE 1983! VIEWING BY APPOINTMENT ONLY! Gusdpsz Aqv Sefx Adtog #####

Condition: good (used), Tool holder, milling holder, milling tool, boring head, spindle tool, reducing sleeves, mounting bracket Gsdpfx Adoz Aqvxetjug -Milling chuck: MK4 chuck -Shaft: Ø 22 mm -Shaft length: 320 mm -Dimensions: Ø 40 x 490 mm -Weight: 2.8 kg

Condition: good (used), Tool holder, reamer, tool holder, machine reamers, reamer, reaming tool, dowel cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, tool holder -Mounting bracket: Mount: MK5 4 pieces -Type: Cone Ø 40/37 mm 2 pieces / Ø 32/29 mm / Ø 27/25 mm -Price/Fee: complete Godpez Aqvrsfx Adtoug -Transport dimensions: 420/230/H65 mm -Weight: 15 kg

Condition: good (used), Tool holder, reamer, tool holder, machine reamers, reamer, reaming tool, dowel cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, tool holder -Mounting bracket: Mount: MK4 6 pieces -Type: Cone Ø 22/20 mm 3 pieces / Ø 19/17 mm 3 pieces -Price/Fee: complete -Transport dimensions: 315/220/H40 mm Gusdpfx Adjz Aqvlotsg -Weight: 7.7 kg

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 559 mm, travel distance Y-axis: 559 mm, travel distance Z-axis: 599 mm, spindle speed (max.): 14,000 rpm, number of slots in tool magazine: 60, number of axes: 5, This 5-axis Makino A51-5XR HMC was manufactured in 2013. It features a generous travel of 22" x 22" x 23.6" and is equipped with a 60-tool automatic changer and a spindle speed of 14,000 RPM. If you are looking to get high-quality machining capabilities, consider the Makino A51-5XR horizontal machining centre we have for sale. Contact us for further details. Additional equipment Guedpsz Aqu Isfx Adtog • Chip conveyor • Cooling unit

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: DLM 705, overall weight: 8,000 kg, The machine is in good overall condition. Price is negotiable after inspection. Gedoz Aquzepfx Adtsug

Condition: ready for operation (used), functionality: fully functional, Facing and centering machine KUHN KAZ 80-2 -Max. workpiece diameter / round 80mm -Max. workpiece diameter / square 60mm -Centering length / endless -Clamping unit with self-centering vice -Spindle drive 1.8 kW -Drill chuck Gusdpfx Ajz Aquuedtog -Chip tray -Connection cable -Forklift pocket for transport Dimensions: L x W x H 1.7 x 0.7 x 1.4 meters / Weight 600 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 2019, functionality: fully functional, New price including transport and installation approx. €850,000 net. The machine was professionally disassembled by qualified technicians and subsequently stored. An inspection at the location in the Netherlands is possible after prior appointment. Technical data: Manufacturer: SCM Stefani Type: One 108 Cell Year of construction: 2019 Operating hours: approx. 5,600 Feed speed: 10–40 m/min Maximum speed with pickback: 30 m/min Workpiece length: approx. 250–3,000 mm Workpiece width: approx. 130–1,200 mm Workpiece thickness: 10–60 mm Maximum workpiece weight pickback: 80 kg Machine length edge banding machine: approx. 11,550 mm Installation area of the complete cell according to layout: approx. 30,270 × 13,166 mm Working height: approx. 970 mm Connection: 400 V / 50 Hz with neutral conductor Workpiece feed: Motorized feed roller table Easy Order BN+ automatic workpiece feed Automatic alignment for longitudinal and transverse processing Servo-controlled workpiece centering Automatic adjustment to different workpiece dimensions Large lateral workpiece support Edge and glue system: Nordson AltaPUR 4HO PUR hot melt unit Melt-on-demand technology Melting capacity up to approx. 6 kg/h SGP glue reservoir with CNC-controlled glue metering Additional interchangeable SGP glue reservoir Separate preheating trolley for one glue reservoir Workpiece edge preheating Automatic positioning of the edge guide and pressure rollers 12-position vertical edge magazine with automatic edge changing Processing of roll material up to 3 mm Designed for thin edge, 20° bevel, and radii R1, R1.5 and R2 Machining units: Pre-milling unit RT-H/RT-X with 2 × 4 kW Electronic positioning of the pre-milling unit Trimming unit YU/SP-1000 with automatic saw blade inclination Flush-cutting and pre-milling unit R-E CNC-controlled RSU-E Hi-Drive Multiedge fine milling unit Processing of thin edge and R1, R1.5 and R2 Round 4 four-motor corner rounding unit Automatic selection of four profiles MX80 HSK milling unit with 10 kW CNC-controlled horizontal and vertical positioning Automatic pivoting from 0–90° Guedpfx Aoz Aquhsdtsg Suitable for continuous or recessed grooves on the top, bottom and workpiece edge CNC-controlled RCS-E Multiedge radius drawing blade unit Edge sanding unit GT with oscillating sanding belt Two glue seam drawing blade units RCA/2C Polishing unit SP/F with oscillating Riepe polishing pads Spraying devices: Release agent spraying device at the machine infeed Antistatic and coolant spraying device Spraying device for sensitive or foiled edges Cleaning agent spraying devices for the glue seam drawing blades Spraying device for the first pressure roller Automatic pickback return: Gantry return system with three servo-controlled axes Workpiece pick-up via vacuum gripper Automatic rotation by 0°, 90°, -90° and 180° Automatic return to the machine infeed Up to 10 return cycles per minute without rotation Up to 9 return cycles per minute with 90° rotation Motorized conveyor belts Additional second unloading station Central control via the machine control system Location: Netherlands Inspection: possible after prior appointment Condition: professionally disassembled and stored Availability: short notice Price: on request The technical data were compiled based on the available original documents. Errors, changes and prior sale are reserved.