Wenker Werkzeugbau KG
Wenker Werkzeugbau KG from Schloß Holte-Stukenbrock
This dealer has not yet provided a company description.
Mr Wenker Andreas
Brinkeweg 12
33758 Schloß Holte-Stukenbrock
Germany
Current offers from similar dealers
Listing
Gent
7,484 km
Laser cutting machine
Bodorlasersnijmachine
Bodorlasersnijmachine
Call
Condition: ready for operation (used), functionality: fully functional, Year of construction: 2022, operating hours: 500 h, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 3,000 W, sheet thickness aluminum (max.): 16 mm, sheet thickness brass (max.): 6 mm, table length: 2,000 mm, table width: 1,000 mm, working length: 1,000 mm, working width: 700 mm, Equipment: CE marking, cooling unit, documentation/manual, Laser Cutting Machine
Brand: BODOR - TUV - CE - with pneumatic clamping table
Type: i5
Table: 1500x700mm
Laser: 3000W (required for brass)
Including pneumatic clamps/table
Main components:
1. Bodorgenius Autofocus laser head
2. Cast iron machine bed
3. Japan YASKAWA servo motor
4. Taiwan ball screw
5. Japan Omron electric component
6. Taiwan square guide rail
7. Exhaust system
8. CW water chiller
9. Bodorpro 2.0 control system
10. Green glass
11. Automatic lubrication device
12. Wifi wireless control
13. Closed protective cover
14. 21.5-inch touchscreen
15. Scan cut (special for high-reflective materials)
Technical parameters:
Max cutting area: 700*1500mm
X/Y axis positioning accuracy: 0.05mm
X/Y axis reposition accuracy: 0.03mm
X/Y axis max movement speed: 60m/min
Max acceleration: 1.5G
Max load capacity: 250kg
Dimensions (L*W*H): 2980×2220×1970mm
Total weight: 2000kg
Bodpfx Ajyq R N Neh Iswi
Listing
Hauzenberg
8,224 km
Laser cutting machine
SENFENGSF-1313G 1,5kW
SENFENGSF-1313G 1,5kW
Call
Condition: used, functionality: fully functional, Year of construction: 2021, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 1,500 W, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 5 mm, sheet thickness brass (max.): 4 mm, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 2,400 kg, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, Used laser cutting machine with 1.5kW fiber laser, in good condition with low operating hours.
Shipping and commissioning/training at your facility are no problem. Even after purchase, you are not left alone. Our technical support is at your disposal.
Our mission is to offer highly precise, long-term stable, and yet cost-effective laser machines. This machine is ideal for workshops and repair shops. A perfectly developed cutting parameter library is included in the delivery, as is first-class service.
This machine offers an excellent and affordable entry into laser cutting technology.
- High-quality laser source
- Extremely energy-efficient cutting system
- Requires only approx. 3.0 x 3.0 meters of installation space
- Very good used, well-maintained condition
- Top quality—schedule a viewing now!
Cuts steel sheet up to 15mm
Cuts stainless steel sheet up to 6mm
Cuts aluminum sheet up to 5mm
- Travel path approx. 1300 x 1300mm
- Table size: approx. 1300 x 2500mm (fits a full medium-format sheet in the machine)
- Machine control in German
- Manual front door
- Extensive collision protection measures
- Large front observation window for monitoring the cutting process
- Automatic, programmable 2-gas switching (compressed air/nitrogen, oxygen)
- Perfectly developed and comprehensive cutting parameter file
- Includes nesting module
- Very easy to operate
- High-performance laser chiller
Sale to commercial customers only.
Delivery / consultation / sales only within Germany / Austria / Switzerland
Bsdpfoyq E I Hjx Ah Iewi
Machine dimensions approx.:
Width: 3.2m
Height: 2.3m
Length: 3.3m
Total weight: approx. 2400kg
Need a different laser power, table type, or table size? No problem. I am happy to provide a customized offer.
Not sure what laser power suits your application?
Of course, we also carry out cutting tests according to your requirements. Many options are possible—laser power ranging from 0.5 kW to 20 kW available.
Listing
Vilnius
8,376 km
Tube Cut Laser ADIGE LT5 Fiber
AdigeLT5
AdigeLT5
Call
Condition: reconditioned (used), functionality: fully functional, Year of construction: 2013, operating hours: 42,900 h, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: IPG, laser power: 1,000 W, pipe diameter (max.): 120 mm, pipe length (max.): 6,500 mm, workpiece weight (max.): 90 kg, power: 21 kW (28.55 HP), year of last overhaul: 2026, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Workable dimentions:
Round tube 12 - 120mm
Rectangular tube 12 - 100mm
Loading tube length 6500mm
Maximum load cradle capacity 4000kg
Maximum unload length 4500mm
Bwsdpfsyqx Tvsx Ah Iei
Listing
Wrocław
8,238 km
Trumpf CO2 laser cutting machine
TRUMPFTruLaser 5030
TRUMPFTruLaser 5030
Call
Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 41,830 h, machine/vehicle number: A0230A2043, laser type: CO₂ laser, laser hours: 23,313 h, laser power: 6,000 W, power: 120 kW (163.15 HP), input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 10 bar, Equipment: documentation/manual, dust extraction, safety light barrier, We offer this used TRUMPF TruLaser 5030 laser cutting machine, year of manufacture 2007.
Laser power: 6000 W
Year of manufacture: 2007
Supply voltage: 400 V
Frequency: 50 Hz
Bwodpoyqulzofx Ah Iei
Connected load: 120 kVA
Control voltage: 24 V
Protection: 3 x 160 A
Compressed air connection: 7-10 bar
Nitrogen connection (N₂): 30 bar
Oxygen connection (O₂): 20 bar
If you have any questions or require additional information, please send us a message or contact us by phone.
Listing
Jena
7,950 km
Laser cutting machine
TrumpfTrupunch 5000-1300
TrumpfTrupunch 5000-1300
Call
Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Operating hours: approx. 4,600 hrs
Attachments: Gripmaster, Toolmaster
Regular maintenance carried out by Trumpf
Detailed information available upon request
Bedsypcfajpfx Ah Iswi
Listing
Lübbecke
7,693 km
Tube laser cutting machine
BodorT230
BodorT230
Call
Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 2,000 h, control type: CNC control, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser hours: 2,000 h, laser power: 2,000 W, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, pipe diameter (max.): 230 mm, pipe length (max.): 6,050 mm, working length: 6,500 mm, input voltage: 380 V, input current: 63 A, type of cooling: water, total length: 11,600 mm, total width: 3,000 mm, total height: 2,600 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, For sale is a used Bodor T230 tube laser. Tube length 6000mm, diameter 230mm, unloading length 2000mm. The machine is in good condition and can be inspected. The system has been reliably serviced and maintained by our trained personnel. Operating manual, CE certificate, extraction system, etc. are included. Inspection in Mönchengladbach.
Bodpfx Aeypawysh Iewi
Auction
Auction ended
Nordrhein-Westfalen
7,646 km
Laser cutting machine
AmadaLC 3015F1 NT + LKI ASLUL 300 F1
AmadaLC 3015F1 NT + LKI ASLUL 300 F1
Condition: not inspected (used), functionality: unexamined, Year of construction: 2009, operating hours: 69,572 h, machine/vehicle number: 28510308, sheet thickness (max.): 20 mm, table height: 940 mm, travel distance X-axis: 3,270 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 100 mm, No reserve price – guaranteed sale to the highest bidder! Reduced starting price due to space requirements!
Auction of an Amada Laser Cutting System + LKI Storage Tower!
Bidding requires timely collection between 23/03/2026 and 27/03/2026!
AMADA LC-3015 F1 NT
TECHNICAL DETAILS
Travel range X-axis: 3,270 mm
Travel range Y-axis: 1,550 mm
Travel range Z-axis: 100 mm
Travel range B-axis: 21 mm
Bwodpfx Ahoyn A Rgs Ioi
Cutting area X-axis: 3,070 mm
Cutting area Y-axis: 1,550 mm
Cutting area Z-axis: 100 mm
Cutting speed X/Y: 0 – 60 m/min
Rapid traverse X/Y/Z: up to 120 m/min
Table height: 940 mm
Workpiece weight: 920 kg
Mild steel sheet thickness: up to 20 mm
Stainless steel sheet thickness: up to 12 mm
Aluminum sheet thickness: up to 10 mm
MACHINE DETAILS
Control system: AMNC-F
Control type: Path control
Controlled axes: X, Y, Z, B
Simultaneously controlled axes: X, Y, Z
Laser model: FANUC AF4000i-B
Laser type: CO₂ laser
Laser class: 4
Laser radiation: invisible
Laser principle: AC-HF excited, fast axial flow
Rated power: 4,000 W
Max. power: 4,000 W
Peak value: 5,000 W
Stability: ±2 %
Frequency range: 5 – 2,000 Hz
Pulse duty cycle: 0 – 100 %
Wavelength: 10.6 µm
Laser beam diameter (output): 27 mm
Laser beam divergence: < 2 mrad
Cooling & Supply
Cooling water flow rate: > 160 l/h
Power supply: 55 kVA
Positioning laser
Laser class: 3R
Laser radiation: visible
Rated power: < 5 mW
Pulse duration: CW
Wavelength: 0.6 – 0.7 µm
Laser medium: Semiconductor or HeNe
Drive type: Linear drives
Assist gas control: Automatic
Machine weight: approx. 11,000 kg
Storage Tower LKI ASLUL 300 F1 (Year of construction 2009)
TECHNICAL DETAILS
Cycle time: approx. 3 min
Pallet change time: approx. 50 s
Raw sheet / unloading pallets: 2 + 4 or 3 + 3
Pallet weight: max. 3,000 kg
Sheet size: max. 3,000 × 1,500 mm
Sheet size: min. 2,000 × 1,000 mm
Material thicknesses
Automatic mode: 0.8 – 20 mm
Shuttle mode: 0.8 – 25 mm
Load data
Sheet weight: max. 920 kg
Load on cutting pallet: max. 920 kg
Stack heights
Raw sheet pallet stack height: max. 150 mm
Unloading pallet stack height: max. 220 mm
Finished part size
Finished part size (X × Y), free-cut: min. 225 × 180 mm
MACHINE DETAILS
PLC: Mitsubishi Q-Series
Operator interface: Beijer E1060
Dimensions & Weight
Dimensions (L x W x H): approx. 4,630 x 4,225 x 6,000 mm
Total weight: approx. 11,000 kg
EQUIPMENT
Double sheet detection
Total dimensions (Amada + Storage Tower)
Dimensions (L x W x H): approx. 11,000 x 10,000 x 6,000 mm
Total weight: approx. 22,000 kg
SCOPE OF DELIVERY
Available manuals
Note: The power supply is showing an error message. It may be defective.
Listing
Subotica
8,748 km
Laser cutting machine
IPG PhotonicsYLR-3000
IPG PhotonicsYLR-3000
Call
Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, laser type: fiber laser, laser power: 3,000 W, Title:
IPG Photonics YLR-3000 – 3 kW Fiber Laser Source with Warranty
Description:
For sale: IPG Photonics YLR-3000 fiber laser source with a power output of 3 kW.
Fully functional, tested, and ready for operation
Excellent condition, used under controlled conditions
Comes with a 12-month warranty
Suitable for industrial applications such as metal cutting, welding, and precision material processing
Additional Information:
Manufacturer: IPG Photonics
Model: YLR-3000
Power: 3000 W (CW)
Type: Fiber laser source
Bedpfx Ahsynutas Ijwi
Listing
Concorezzo
8,169 km
Laser cutting machine
AdigeSEGATRICE CM601
AdigeSEGATRICE CM601
Call
Condition: reconditioned (used), functionality: fully functional, Year of construction: 2005, operating hours: 5,784 h, Cutting materials: ideal for cutting iron
Cutting head: Head P
Tube loading capacity: 6500 mm
Tube unloading capacity: 1000 mm
Tube processing limits:
Tubes max. Ø 102 mm
Solid bars max. Ø 65 mm (steel alloys)
Solid bars max. Ø 102 mm (iron)
Configuration:
Head P
Rear loader 6500
“Adilube” system
Turbo cooling
Part unloading length L=1000 mm
Bwodpjyngmxofx Ah Iei
Listing
Eppingen
7,913 km
Laser cutting machine
TRUMPFTrumatic 600L Großformat
TRUMPFTrumatic 600L Großformat
Call
Condition: used, functionality: fully functional, Year of construction: 2000, operating hours: 87,524 h, machine/vehicle number: 9312, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Siemens, controller model: 840D, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser power: 3,000 W, laser wavelength: 10,600 nm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, table length: 3,080 mm, table width: 1,740 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,080 mm, travel distance Y-axis: 1,740 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 300 m/min, feed rate Y-axis: 300 m/min, feed rate Z-axis: 300 m/min, cutting speed: 300 mm/min, positioning speed: 3,000 m/min, positioning accuracy: 0.01 mm, repeat accuracy: 0.01 mm, workpiece weight (max.): 230 kg, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: AC, type of cooling: water, compressed air connection: 6 bar, overall weight: 23,000 kg, total length: 8,000 mm, total width: 8,000 mm, total height: 2,400 mm, year of last overhaul: 2026, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Immerse yourself in the world of high-precision metalworking with the TRUMPF Trumatic 600L punch and laser combination machine. Delivering an impressive 3 kW of power and featuring a working area of 3080 mm x 1740 mm, it handles even the most demanding tasks effortlessly. Manufactured in Germany in 2000, this machine is renowned for its robustness and reliability, accommodating sheet thicknesses up to 8 mm and operating at speeds of up to 300 m/min. The hydraulic pressure of 22 bar ensures precise punching results. With comprehensive accessories and user-friendly CNC controls, you are perfectly equipped to tackle any challenge.
Bwedpeym Rwrsfx Ah Ioi
Listing
Páty
8,599 km
Laser cutting machine
JFYBFC+ 3015
JFYBFC+ 3015
Call
Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Innovance, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: Trufiber 6001G, laser hours: 1 h, laser power: 6,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 20 mm, working length: 3,000 mm, working width: 1,500 mm, workpiece weight (max.): 900 kg, input voltage: 400 V, input current: 125 A, type of input current: three-phase, type of cooling: water, compressed air connection: 14 bar, overall weight: 5,500 kg, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Key Feature Highlights
TRUMPF TruFiber – New Generation Laser Source
Outstanding beam quality with Active Power Control for long-term precision
Power redundancy for stable operation and minimized unplanned downtime
±0.5% power stability for consistent, repeatable cutting results
Highest safety level (PL e) meeting strict international standards
Bwsdeymx Tnopfx Ah Isi
Reliable cutting of mild steel, stainless steel, and highly reactive materials
PRECITEC Cutting Unit
Lightweight, high-performance optics for faster cutting speeds
High precision, optimized for thick material processing
Easy and fast maintenance to reduce downtime
Control & Software
CypCut bus control system with intuitive online programming
Extra-large HMI display with real-time process monitoring
Predefined cutting parameters for the full thickness range
JFY CUT software included for efficient nesting and offline job preparation
Machine Stability & Accuracy
Welded, structurally optimized machine bed for maximum rigidity
Plate-welded cross beam with excellent thermal stability
Premium drive technology for precise, repeatable motion
FEM-verified structure ensuring long-term accuracy and reliability
Listing
Bad Waltersdorf
8,461 km
Trumalift
TRUMPFTrumaLift
TRUMPFTrumaLift
Call
Condition: good (used), functionality: fully functional, Year of construction: 1999, control type: CNC control, degree of automation: automatic, actuation type: pneumatic, workpiece weight (max.): 200 kg, Equipment: CE marking, documentation/manual, The SheetMaster is in good condition.
Bsdpfx Ahsymr Hne Iswi
Listing
Bad Waltersdorf
8,461 km
Laser cutting machine
TRUMPFTrumatic TC 6000 L-1300
TRUMPFTrumatic TC 6000 L-1300
Call
Condition: good (used), functionality: fully functional, Year of construction: 2004, control type: CNC control, degree of automation: automatic, laser type: CO₂ laser, laser power: 2,700 W, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, workpiece weight (max.): 200 kg, overall weight: 22,500 kg, total length: 9,100 mm, total width: 7,100 mm, total height: 2,400 mm, punching force: 220 t, punching diameter: 76 mm, stroke rate (min.): 600 1/min, Equipment: CE marking, documentation/manual, emergency stop, safety light barrier, The machine is in good condition.
Bwodpfxsymr Eds Ah Isi
Listing
Schwabach
8,026 km
Forming machine
BLMAST 38 6F.
BLMAST 38 6F.
Call
Condition: used, Tube ends – forming machine BLM (Italy)
used tube end forming machine BLM
for tubes with six-position turret
Drive power: 7.5 kW
max. tube diameter approx.: 40 mm
Max. forming length estimated: 80 mm
Weight approx.: 1.5 t
Bwjdpfsymgcksx Ah Iji
Listing
Madrid
7,603 km
ADIGE LT8 TUBE LASER CUTTING MACHINE
ADIGELT8 TUBE LASER CUTTING MACHINE
ADIGELT8 TUBE LASER CUTTING MACHINE
Call
Condition: used, Year of construction: 2015, TUBE LASER CUTTING MACHINE, Model LT8, made by ADIGE
This tube laser cutting machine is in excellent working condition. Manufactured in 2015, it has been meticulously maintained, ensuring optimal performance.
Technical data:
- Round profiles diameter: 20 - 220 mm
- Square profiles: Max. 200x200 mm
- Max length: 8500 mm
- Max tube weight: 32 kg/m
- Laser Source: CO2
- Laser Power: 3 kW
- Lens holders for: 5 & 7.5 “
- Bundle loader & Loading module: with 5 arms
- Tube length loading: 8500 mm
- Cutting head: 3D Tilt head
- Max tube length unloading: 8500 mm
- Unloading modules for tube lengths: 4500mm / 6500mm / 8500 mm
- Front unloading conveyor for short parts: Up to 500 mm
Scope of supply:
- TRUMPF TruLaser Tube 5000
- Tube LoadMaster
- Bundle loader with 8.5 m step loader
- Finished part 8.5 m collecting table
- Chiller
- Extractor
Special features
- Machine integration Rofin
- Rear scrap conveyor
- Capable for open profiles
- Handling option for delicate tubes
- High speed pierce boost
- Weld seam detection
- Artube modules second licenses + USB hardware key
- CAD – CAM
- Artube adv CAM features
- Direct import steps / Iges files
- Post Processor LT8 for Artube (1st license)
- Production time and Cost calculation
- Artube Service Contract Annual Fee
- Advanced edit
- Part viewer
- Cut and fold library
- Booster drilling process
- Remote tele-diagnostic
- Siemens 12 months full warranty
- Auto focusing head
- Protube Express off line nesting and scheduling
- Protube Enterprise productivity & machine monitor
- Whole nbar processing software
- Pierce booster edge detection
Round profiles diameter: 20 - 220 mm
Square profiles: Max. 200x200 mm
Max length: 8500 mm
Max tube weight: 32 kg/m
Laser Source: CO2
Laser Power: 3 kW
Lens holders for: 5 & 7.5 “
Bodjyma Itspfx Ah Iswi
Bundle loader & Loading module: with 5 arms
Tube length loading: 8500 mm
Cutting head: 3D Tilt head
Max tube length unloading: 8500 mm
Unloading modules for tube lengths: 4500mm / 6500mm / 8500 mm
Front unloading conveyor for short parts: Up to 500 mm
Listing
Günzburg
8,038 km
Press brake
TRUMPFTrumaBend V 200
TRUMPFTrumaBend V 200
Call
Condition: excellent (used), functionality: fully functional, Year of construction: 2005, Press force: 200 t
Bending length: 4000 mm
Upright width: 3550 mm
Control: Delem
Machine weight approx.: 20,000 kg
Space requirement approx.: 5000x2000x3000 mm
Accessories/Equipment:
- 2 support tables in front of the machine
Bodpjylwk Asfx Ah Iowi
- Side safety doors
- Light barrier in front of the machine
- Delem control
- Crowning
- Die shifting
- Two-hand foot switch
- Wila tool holder
- Controlled axes: y1, y2, X, R, Z1, Z2
Operating hours:
- approx. 15,900 h (still in operation)
Listing
Germany
8,136 km
Laser cutting machine
TRUMPF3030 L20
TRUMPF3030 L20
Call
Condition: good (used), functionality: fully functional, Year of construction: 2013, control type: CNC control, degree of automation: automatic, actuation type: electric, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, FOR SALE: TRUMPF TruLaser 3030 L20 (4000 W) – Precision and Flexibility
Available for purchase is a reliable TRUMPF TruLaser 3030 L20 laser cutting machine from the year 2013. This model is highly regarded for its balance of speed and precision, making it an excellent choice for versatile production environments.
Key Technical Details:
Bjdpfx Ahsyluv Aj Iswi
Power: 4000 W
Max. Working Range: 3000 x 1500 mm
Positioning Accuracy: 0.03 mm/m
Axis Speeds: Up to 140 m/min (simultaneous)
Cutting Speeds: 0.8 – 26 m/min
Material Capacities:
Mild Steel: Up to 20 mm
Stainless Steel: Up to 15 mm
Aluminum: Up to 10 mm
Special Features:
Equipped with an open loading and unloading station, this machine allows for rapid switching between different sheet sizes, significantly increasing operational flexibility. It has been maintained within a high-standard production facility with a documented annual throughput of 800 tons.
Listing
Germany
8,136 km
Laser cutting machine
TRUMPFTruLaser 3030 L20
TRUMPFTruLaser 3030 L20
Call
Condition: used, functionality: fully functional, Year of construction: 2011, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: CO₂ laser, laser power: 5,000 W, FOR SALE: TRUMPF TruLaser 3030 L20 (5000 W) – High-Performance Laser Cutting Solution
We are offering a high-quality, German-engineered TRUMPF TruLaser 3030 L20 laser cutting machine. Known for its reliability and precision, this 5000 W power-house is exceptionally well-suited for processing a wide range of material thicknesses with high efficiency.
This machine has been utilized by Heizomat and features custom configurations designed for high-volume series production.
Technical Specifications:
Model: TruLaser 3030 L20
Bedpoyluu Sjfx Ah Iowi
Power: 5000 W
Year of Manufacture: 2011
Max. Sheet Size: 3000 x 1500 mm
Positioning Accuracy: 0.03 mm/m
Max. Axis Speed: 140 m/min
Cutting Speed: 0.8 – 26 m/min
Maximum Cutting Capacities:
Mild Steel (Baustahl): 25 mm
Stainless Steel (Edelstahl): 20 mm
Aluminum: 12 mm
Listing
Berlin
7,932 km
Laser cutting machine
DXTECH1530FL3T245-3000W
DXTECH1530FL3T245-3000W
Call
Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 2 h, machine/vehicle number: DX250826F, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: BOCHU, controller model: CYPCUT, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: RFL-C3000, laser hours: 2 h, laser power: 3,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 5 mm, pipe diameter (max.): 245 mm, pipe length (max.): 3,000 mm, table length: 3,055 mm, table width: 1,550 mm, table height: 70 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 100 mm, travel distance X-axis: 1,550 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 370 mm, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 1,600 kg, power: 24.9 kW (33.85 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 16 bar, overall weight: 4,600 kg, total length: 6,000 mm, total width: 3,500 mm, total height: 1,200 mm, warranty duration: 18 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, EXTRA Oxygen/Nitrogen Valve
Bwjdpfx Aoylbbfeh Ioi
The machine is in an assembled condition after transport and can be commissioned upon verification of its functionality.
So far, it has only been used for manufacturer testing purposes.
Tube holder clamping range:
15 mm–245 mm (round), 15 × 15 mm–245 × 245 mm (square)
Immediately available in Berlin
No lead time for delivery.
Auction
Ends in
d
h
min
s
Auction ended
Baden-Württemberg
7,992 km
Laser cutting machine
TRUMPFTruLaser 3030
TRUMPFTruLaser 3030
Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: 908, laser power: 3,200 W, travel distance X-axis: 1,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 600 mm, No minimum price – guaranteed sale to the highest bidder!
Submitting a bid obligates you to collect the equipment within the specified period between 08.04.26 and 16.04.26!
TECHNICAL DETAILS
X-axis travel: approx. 1500 mm
Y-axis travel: approx. 4500 mm
Z-axis travel: approx. 600 mm
Laser power: 3.2 kW
Table dimensions: 3500 x 2000 mm
MACHINE DETAILS
Lifting device model: TRUMPF LOADMASTER
Number of suction units on lifting device: 12
Lifting device features: Light barrier system
Dimensions & Weight
Dimensions (L x W x H): 12000 x 7000 x 2400 mm
Bedpfxoylalvs Ah Iswi
Machine weight: 15 t
EQUIPMENT
Shuttle table
Additional laser head
Accessories
Note: The laser cutting system can be transported on trucks up to 3000 mm in width, so no special permit is required.
Listing
Neubrandenburg
7,865 km
CNC laser cutting machine
Amada PromecanFO-3015 NT
Amada PromecanFO-3015 NT
Call
Condition: ready for operation (used), For sale is a CNC laser cutting system by Amada Co., Ltd., model PROMECAM / FO-3015 NT, equipped with the ASLUL 300 FO Tower automatic loading and unloading system. This is a highly productive industrial unit for automated sheet metal processing, including an integrated tower storage system with automatic material handling for efficient manufacturing processes with minimal manpower requirements.
Technical Data – CNC Laser Cutting System AMADA PROMECAM 3015 NT with ASLUL 300 FO Tower
Base Machine – Laser System 3015 NT
Machine type: CNC laser cutting machine (CO₂ laser, flying optics)
Manufacturer: Amada Co., Ltd. / AMADA PROMECAM
Model: FO-3015 NT
Control: AMNC-F CNC with touchscreen
Laser technology: CO₂ laser, flying optics system
Laser Power
Laser output: 4,000 W
Laser resonator: Fanuc AF 4000
Laser principle: CO₂ silent discharge
Continuous power stability: ± 1%
Bodpfxsyk S Rzs Ah Ijwi
Working Area
X-axis: approx. 3,070 mm
Y-axis: approx. 1,550 mm
Z-axis: approx. 100 – 200 mm
Max. sheet size: approx. 3,000 × 1,500 mm
Max. workpiece weight: up to approx. 920 kg
Cutting capacity (typical):
Mild steel: up to approx. 20 mm
Stainless steel: up to approx. 15 mm
Aluminum: up to approx. 10 mm
Material thickness in general: 0.5 – 20 mm depending on material and laser power
Axes and Dynamics
3 CNC axes: X, Y, Z
Positioning accuracy: ± 0.01 mm
Repeatability: ± 0.005 mm
Positioning speed: up to 120 m/min per axis
Simultaneous speed: up to 169 m/min
Machine Design
Flying optics system
Heavy-duty cast frame for high stability
Automatic pallet changer (2-table system)
Automatic cutting head tracking
Capacitive cutting head
Connections
Power supply: 400 V
Total power consumption: approx. 70 kVA
Compressed air requirement: approx. 6 bar
Machine Dimensions and Weight
Machine weight: approx. 11,000 kg
Machine dimensions: approx. Length: 6,700 mm / Width: 4,400 mm / Height: approx. 2,100 mm
ASLUL 300 FO Tower System – Automatic Sheet Storage
System: automatic loading and unloading system with tower storage
Max. sheet size: 3,050 × 1,525 mm
Max. pallet weight: up to 3,000 kg
Number of pallets: multi-level automatic storage system
Pallet change time: approx. 55 seconds
Features:
automatic loading and unloading
automatic material handling
automatic pallet changing
finished parts handling
integration into automated production lines
Equipment
Flying optics laser system
automatic shuttle pallet changer
AMNC-F CNC controller
ASLUL 300 FO Tower System
automatic material handling
suitable for industrial series production
fully automatic operation possible
extremely high productivity
reduced setup times
minimal personnel requirement
Condition
Used
Technically inspected and fully functional
The system can be demonstrated
Immediately available
Delivery time: upon agreement
Freight terms: ex site, loaded free of charge
Dismantling / transport / reassembly can be organized
Listing
Holzheim
8,067 km
Laser cutting machine
DURMAHD-TC 60170
DURMAHD-TC 60170
Call
Condition: ready for operation (used), functionality: fully functional, operating hours: 9,000 h, pipe diameter (max.): 170 mm, power: 2 kW (2.72 HP), This Durma HD-TC60170 features a 6.5 m infeed section and a 4 m outfeed section. It is capable of processing round tubes up to a maximum diameter of 170 mm, square profiles of 120 mm x 120 mm, and rectangular profiles of 150 mm x 100 mm. The equipment includes an extraction system, splash guard, and a bundle loader.
Contact us for further information about this machine.
Bwodpfjyk Slxox Ah Iei
Listing
Leipzig
7,966 km
CO2 Cutting and Engraving Laser
WINTERLASERMAX MIRA 5 5030-60W
WINTERLASERMAX MIRA 5 5030-60W
Call
Condition: new, Year of construction: 2026, working area 500x300 mm
work height max. 100 mm
Weight 120 kg
WINTER LASERMAX MIRA 5 5030-60W LASER ENGRAVING AND LASER CUTTING MACHINE
Technical data:
- Certified according to laser class 1 in closed operation
- Working area X, Y 500 x 300 mm
- Work table electrically height-adjustable up to 100 mm
- CO2 laser peak power 60 W
- Speed max. 800 mm/s
- Engraving speed max. 1200 mm/s
- Repeat accuracy +-0.01 mm
- Min. font size 1 mm
- Linear guides in X-axis and Y-axis
- Material support aluminum rails and honeycomb table included
- Drive X, Y with high-precision toothed belt drive via stepper motors
- Operating systems: Windows 7 or higher
- Control via LCD display
- Ruida RD6442 control with 128 MB RAM
Bjdpfx Aoyk Ib Noh Iowi
- Interfaces: USB, WIFI, RJ45
- Red positioning laser to reduce setup times
- Freely definable zero point on the work surface for flexible working and easy positioning
- Integrated autofocus for quick setup of the working height
- Power consumption 2300W
- Compatible formats BMP, HPGL (PLT), DXF, G-CODE, DST, Al (Autocad, CorelDraw)
- Electrical connection 230 V, 50/60 Hz
- Our laser machines come with a 1-year warranty
- Cutting depth depends on the material (cutting capacity for acrylic approx. 15 mm)
- Lens focus dm 18 mm, F50.8, 38.1
- Mirror dm 20 mm
- Active water cooling integrated for stable operation of the laser system and long service life of the laser tube
- Suction fan power 500W integrated
- Compressor power 85 W integrated
- Including feet
- Suitable for wood, ceramics, glass, and plastic
- Dimensions L=1200 mm, W=710 mm, H=413 mm
- Net weight 120 kg
Listing
Leipzig
7,966 km
CO2 Cutting and Engraving Laser
WINTERLASERMAX MAXI 1390-150W
WINTERLASERMAX MAXI 1390-150W
Call
Condition: used, Year of construction: 2022, laser capacity in Watt 130 / 150 Peak
working area 1300x900 mm
Dimensions (L/W/H) 2200x1350x1150 mm
Bjdsyk H S Tspfx Ah Iowi
Weight 500 kg
Listing
Sattledt
8,284 km
Laser punching machine
Prima PowerPlatino Fiber
Prima PowerPlatino Fiber
Call
Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 66,465 h, machine/vehicle number: P5.04.01.41, Rated voltage:
3PH x 400V
1PH x 230V
Rated current:
3PH x 45A
1PH x 6A
Frequency:
50Hz
Switching capacity:
40kA
Cutting gases:
Nitrogen & Oxygen
Machine dimensions:
3250 x 5000mm
Table dimensions:
1610 x 3000mm
Bsdpfxjykr Rns Ah Iowi
External additional components:
Ytterbium Laser System -> YLS-4000-Cut
Cosmotec cooling unit
Exhaust system
Descaling unit
Available spare parts:
Various filters & nozzles

























































































































































































































































































































































