Havlik Machine

Condition: good (used), Year of construction: 1993, Swing diameter over bed: 1000 mm Spindle bore: 128 mm Turning length: 5000 mm Total power requirement: 22 kW Machine weight approx.: 16 t Space requirement approx.: 7.8 x 2.3 x 1.8 m Itedpfxexx Tylo Ad Dop

Condition: good (used), Year of construction: 1992, Swing diameter over bed: 1000 mm Spindle diameter: 128 mm Itsdpfsxx Tx Ijx Ad Djp Turning length: 8000 mm Total power requirement: 22 kW Machine weight approx.: 20 t

Condition: used, Heavy Duty Lathe SN1250X10000 as follows: Manufacturer: 1MAI PLOIESTI (Romania) Year of manufacture: 1986 Main technical data: • Face plate diameter: 1250 mm • Max. swing over bed: 1250 mm • Max. swing over carriage: 970 mm • Centre height: 625 mm • Distance between centres: 10,000 mm • Max. workpiece weight: 16 t • Main spindle speed range: 0.8 – 160 rpm • Main drive motor: 75 kW • Longitudinal feed: 0.4 – 480 mm/min • Cross feed: 0.2 – 240 mm/min • Compound feed: 0.15 – 180 mm/min • Compound travel: 500 mm • Cross slide travel: 520 mm • Tool post travel: 175 mm • Machine weight: approx. 29,000 kg Ijdpfsxx Irisx Ad Detp Accessories: - 4-jaw face plate - 5 steady rests

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, For sale: this lathe. Complete overhaul in 2009 Swing diameter over bed: 1,000 mm Turning length: 5,000 mm Siemens Sinumerik 840D Itedpsxxvqaefx Ad Dsp

Condition: ready for operation (used), Year of construction: 1977, Available immediately ex location: Gurutzpe longitudinal & cross lathe Type: Super AT Year of manufacture: 1977 Swing over bed: 825 mm Iodpfx Adoxxuzks Dstp Swing in gap: 1150 mm Centre height: 400 mm Swing over support: 550 mm Centre distance: 2000 mm Spindle speeds up to 500 rpm Spindle bore: 76.5 mm Drive: 15 kW Includes chuck, faceplate, steady rest Chuck diameter: 320 mm Faceplate diameter: 800 mm Price: EUR 5,750.-- plus VAT, ex location

Condition: like new (used), Year of construction: 1999, functionality: fully functional, For sale: this lathe, currently connected and can be tested under power. Swing diameter over bed: 1,600 mm Swing diameter over carriage: 1,300 mm Itodpjxxtc Tofx Ad Djp Turning length: 6,000 mm Siemens Sinumerik 840D

Condition: used, Year of construction: 1965, Heavy-duty lathe HES, 3 guides Turning diameter: 1,800 mm – distance between centers: 12,400 mm 2 carriages Admissible weight between centers: 30 t Spindle motor power: 50 HP Motorized tailstock 6 steady rests from 252 to 700 mm Itjdpfx Aexw R D Sjd Dop Chip conveyor

Condition: used, functionality: fully functional, GURUTZPE B10000 LATHE 10 METERS BETWEEN CENTERS 1900mm SWING OVER GAP 1600mm SWING OVER BED Itedpsxwwi Iefx Ad Dep 1200mm SWING OVER CARRIAGE 105mm SPINDLE BORE / BAR CAPACITY 4-JAW CHUCK FIXED AND STEADY RESTS

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, spindle bore: 84 mm, turning diameter: 1,000 mm, turning length: 5,000 mm, quill stroke: 300 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, swing diameter over cross slide: 600 mm, faceplate diameter: 1,000 mm, The lathe is in excellent condition, under power. It is equipped with steady rest. Manufactured by Ryazan (Russia) Iedpjxwuw Njfx Ad Djtp Work piece diameter, mm 1000 Work piece length, mm 5000 Spindle rotation speed, rpm 5 – 500 Spindle bore diameter, mm 84 Metric threading, mm 1 – 120 Inch threading, thread/inch 28 – 1/4 Module threading, module 0,5 – 30 Quill taper Morse 5 Quill movement, mm 300 Motor capacity, kW 22 Machine weight, kg 15750 Machine dimensions, mm 6140 x 2200 x 1760

Condition: used, Year of construction: 1971, functionality: fully functional, For sale: this lathe is connected and can be tested. A video of the machine can be sent via WhatsApp. Swing diameter over bed: 1,000 mm. Turning length: 12,000 mm. Iodoxwqk Sspfx Ad Dstp

Condition: excellent (used), Year of construction: 1970, functionality: fully functional, I am selling this machine; it is connected and can be tested. A video of the machine can be sent via WhatsApp. Swing diameter over bed: 1250 mm – Swing diameter over support: 1000 mm – Turning length: 6000 mm. Isdpexwqk Ejfx Ad Dstp

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, We are selling this lathe. It is connected and can be tested under power. The machine comes with accessories. Turning diameter: 2,000 mm. Turning length: 10,000 mm. Maximum workpiece weight: 60,000 kg. Machining diameter: 2,000 mm. A video of the machine can be sent via WhatsApp. Itsdpfxexwmbms Ad Djp

Condition: excellent (used), spindle bore: 84 mm, turning diameter: 1,000 mm, turning length: 5,000 mm, quill stroke: 300 mm, total length: 11,380 mm, total width: 2,200 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, swing diameter over cross slide: 1,876 mm, metric thread diameter (min.): 1 mm, metric thread diameter (max.): 120 mm, overall weight: 17,730 kg, quill mount: MK 5, faceplate diameter: 1,000 mm, Heavy duty lathe is in a very nice condition, under power. It is equipped with lunette and steady rest. Carriage is overhauled, shaft bronze bushings are new. Itsdpfx Asxwd D Eed Dsp

Condition: good (used), Year of construction: 1990, Ref. -No.: 10590 Manufacturer: EST TICINO Type: 520 x 1500 Year of construction: 1990 Type of control: Konventionell Storage location: Halberstadt Country of origin: Italy Machine-No.: 0012XXXX Chuck diameter: 4 x Ø 1700 mm Turning Length: 1500 mm Turning Diameter Over Bed: 1040 mm Spindle Speeds: 600 RPM Iodjxvw N Sepfx Ad Detp Centre Distance: 1500 mm Spindle Bore: 160 mm Spindle power: 35 kW Turning diameter over cross slide: 710 mm Machine length: 5000 mm Machine width: 2350 mm Machine Height: 2100 mm Weight Of The Machine Ca.: 8,5 t Max. swing diameter: 1880 mm Further information: - Made of cast iron - Hardened and ground guideways The machine can be viewed under power by appointment.

Condition: excellent (used), Swing over bed: 800mm Swing over support: 450mm Itedpfx Aext Nx Tod Djp Turning length: 2800mm Workpiece weight: 5000kg

Condition: used, Year of construction: 1996, functionality: fully functional, Equipment: rotational speed infinitely variable, Masroc Le Mans Lathe Itsdpsxtm Rtefx Ad Dop 3 m centre distance capacity Type C 10 HP Year 1996 With DRO With steadies and tooling

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø 1040 mm Swing over cross slide Ø 710 mm Swing in the gap Ø 1580 mm DBC Turning Length 3000/4500 mm Gap length Isdsxtbf Espfx Ad Dstp 1500 mm Spindle bore 160 mm Spindle power 40 kW Bed width 800 mm Spindle taper 6 Mk Workpiece weight 3500 Speeds / ranges 800 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1960, functionality: fully functional, turning diameter over cross slide: 1,050 mm, turning diameter: 1,430 mm, turning diameter over bed slide: 1,430 mm, turning length: 2,000 mm, three-jaw chuck diameter: 1,150 mm, Offering a Heyligenstaedt lathe for sale. Swing over bed: 1430 mm Swing over cross slide: 1050 mm Centre distance: 2000 mm Iedpoxr N Ncjfx Ad Detp Faceplate D1200 mm with jaw boxes Drive power: 20 kW Weight: approx. 11 tons Year of manufacture: approx. 1960 Main spindle gearbox stepless with 3 gear ranges The machine is equipped with a powered compound slide with 400 mm travel The machine is fully operational.

Condition: ready for operation (used), Distance between centers: 4000 mm Center height: – over bed 650 mm – in bridge area: 800 mm Swing diameter: – over bed 1200 mm – over cross slide 1000 mm – in bridge area 1600 mm Platform: 1200 mm Bore diameter: 140 mm Speed: 2–800 rpm Bed: – bed width 650 mm – longitudinal slide length 820 mm – total cross slide travel: 600 mm – upper slide travel: 300 mm GIVI 3-axis digital readout Electric motor 28.5 kW Dimensions: 6325 x 1400 mm Itodpfxoxq E D To Ad Dep

Condition: good (used), Year of construction: 1970, turning diameter: 2,000 mm, year of last overhaul: 2004, WORKING RANGE TURNING .. swing diameter (max): 2000 mm Itsdpfjxm Rt Ejx Ad Djp .. worpiece length max.: 10000 mm .. workpiece weight max.: 60000 kg The machine was completely overhauled in 2004. Accessories: various bezels, as shown in the pictures.

Condition: good (used), Year of construction: 1954, Ref. -No.: 10576 Manufacturer: VDF WOHLENBERG Type: VDF Year of construction: 1954 Iodpoxmd U Aefx Ad Djtp Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Germany Machine-No.: 27XXX Turning Length: 4000 mm Spindle Diameter: Ø 80 mm Faceplate Speeds I: 355 RPM Turning diameter over cross slide: Ø 1000 mm Max. Turning diameter: Ø 1250 mm

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 620 mm, spindle bore: 160 mm, turning diameter: 1,600 mm, turning diameter over bed slide: 900 mm, center height: 450 mm, turning length: 2,500 mm, total length: 4,000 mm, total width: 1,250 mm, total height: 1,600 mm, spindle speed (max.): 700 rpm, spindle speed (min.): 9 rpm, Parallel lathe with movable bed Tacchi model FTA 40 featuring: - Center height: 450 mm - Distance between centers with bed closed: 1500 mm Iodpfsxl R U Hex Ad Dotp - Distance between centers with bed open: 2500 mm - Useful bar passage: 160 mm - Rotating tailstock - Position readouts - Motorized longitudinal bed movement - Standard accessories Free deferred payment over 12/24 months.

Condition: good (used), Year of construction: 1981, turning diameter over cross slide: 630 mm, spindle bore: 95 mm, turning diameter: 1,380 mm, turning diameter over bed slide: 930 mm, turning length: 1,000 mm, total length: 2,800 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 6,200 kg, Lathe TPC 90 x 1000. Manufacturer: PORĘBA (PL) - 1981. Turning diameter over bed: 930 mm. Turning diameter over carriage: 630 mm. Turning diameter in gap: 1380 mm. Spindle bore: 95 mm. Spindle speed range: 8–800 rpm. Max. turning length in gap: 400 mm. Max. turning length with tailstock: 750 mm. Max. turning length without tailstock: 1000 mm. Max. travel of inner bed: 450 mm. Saddle feeds range, 80 steps: Isdpfxexiwfye Ad Dstp - Longitudinal: 0.1–12.8 mm/rev. - Cross: 0.05–6.4 mm/rev. 2-speed motor: 15/22 kW. Morse taper internal: No. 6. Dimensions (L x W x H): 2780 x 1800 x 1750 mm. Weight: 6200 kg. Equipment: 4-jaw faceplate 800 mm, 3-jaw self-centering chuck 400 mm, tailstock.

Condition: excellent (used), Tacchi HD/1450 – 725 x 4000mm CNC Lathe (2012) Serial Number: 7264 Year: 2012 Control: Fanuc OiTD CNC Condition: Used – good working order Technical Specifications: Centre height: 725mm Swing over bed: 1450mm Swing over cross slide: 1000mm Distance between centres: 4000mm Main drive motor: 60 kW Maximum weight between centres (unsupported): 15,000 kg Spindle speed range: 1.9 – 560 rpm Features & Equipment: 2 x 3-point steady rests Handwheel Swarf conveyor Itodpjxc In Ssfx Ad Dsp 4-position hydraulic toolpost 4-jaw chuck Fanuc OiTD CNC control

Condition: ready for operation (used), Year of construction: 1965, Gap-bed parallel lathe Brand: SCULFORT Model: FABRICAP 650 Year: 1965 Serial No.: 127751 Specifications: Distance between centers: 6,000 mm Swing over bed: 1,400 mm Swing over carriage: 1,000 mm Swing in gap (over 565 mm): 1,750 mm Tailstock quill diameter: 200 mm Tailstock quill travel: 400 mm Bar capacity: 12 mm Taper: Metric 100 Spindle speed: 2.5 – 250 rpm Admissible load between centers without steadies: 12,000 kg Itodpfx Adoxbdlds Dep Admissible load between centers at 3 rpm: 20,000 kg Max. load on faceplate at 3 rpm: 5,000 kg Equipped with: 4-jaw chuck 1,700 mm 2 three-point steady rests dia. 300 to 600 mm 1 three-point steady rest dia. 600 to 1,000 mm Hardened guideways Digital readout Rapid traverse