Zphu Regsonik

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: SMOOTH TECNOLOGY, table width: 1,100 mm, table length: 600 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 20,800 h, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Type: Vertical machining center Vertical Brand: MAZAK Model: SMART 530C Year: 2016 C.N.C: SMOOTH TECNOLOGY Table dimensions: 1100x600 mm Longitudinal X-travel: 1050 mm Godpfx Aaox Ttr Te Iobg Cross Y-travel: 530 mm Vertical Z-travel: 510 mm Spindle nose: SK40 ISO Spindle speed: 12000 rpm. Motor power: 18,5 Kw Rapid X,Y,Z axis: 40000 mm/min Tool Stations: 30 no.

Condition: good (used), Year of construction: 2016, In good technical condition and fully functional. Built in 2016. Machine includes 4-axis TSUDAKOMA, workpiece probe, and tool probe. Drives Axis drives (X/Y/Z) 1,000 / 550 / 500 mm Distance table surface - spindle surface 130 - 630 mm Axis guide - linear rolling LM Table work surface 1,100 x 502 mm Load capacity 700 kg Gbjdpfx Aaox Tti Se Ieg Table surface configuration mm 5x T-slot (width 18, pitch 80) Maximum spindle speed 12,000 rpm Spindle power (10 min./continuous) kW 18.5 / 11 Rapid feeds (X/Y/Z) m/min 36 / 36 / 30 Working feed (X/Y/Z) mm/min 1 - 24,000 Sliding motor (X/Z) kW 1.8 / 1.8 / 3.0 Automatic tool change Tool taper - BT40 Clamping bolt - MAS P40T-1 (45°) Number of tool positions: 24 Max. tool diameter mm Ø 80 / Ø 150 (without secondary tool) Max. tool length / weight mm / kg 300 / 8 Tool-to-tool change time: Section 2.5 Chip-to-chip change time: Section 4.3 Magazine and change disk design with rotating arm Power consumption: 30 kVA Tank capacity for spindle lubrication/cooling: l 6 / 20 For cooling emulsions: l 380 Machine dimensions: Height mm 2,670 Floor area (length x width) mm 3,335 x 2,200 Weight: 6,500 kg Control system: Fanuc 0i-MD Air blowing of the spindle Machine adjustment elements Machine protective cover Screw conveyor in the work area Cooling system Safety door Ethernet interface

Condition: ready for operation (used), Year of construction: 2012, operating hours: 13,400 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller manufacturer: Heidenhain, controller model: TNC530, table width: 1,200 mm, table length: 610 mm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 13,400 h, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, Type: Vertical machining center Vertical Brand: EUMACH Model: HSM 1000L Year: 2012 C.N.C: HEIDENHAIN TNC 530 Technical information Table dimensions: 1200x610 mm Longitudinal X-travel: 1020 mm Cross Y-travel: 610 mm Vertical Z-travel: 610 mm Spindle nose: BT40 ISO Spindle speed: 10000 rpm. Motor power: 20 Kw Gbjdox Ttgwspfx Aa Ijg Rapid X,Y,Z axis: 45000 mm/min Tool Stations: 24 no.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 8,500 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller manufacturer: Heidenhain, controller model: TNC530, table width: 1,200 mm, table length: 540 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 8,500 h, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, With chip conveyor and tool holders cone. Gbjdpfx Aajx Ttd Nj Iog

Condition: ready for operation (used), Year of construction: 2012, operating hours: 7,840 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller manufacturer: Heidenhain, controller model: TNC530, table width: 1,200 mm, table length: 540 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 7,840 h, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, With tool holders Gbodpex Trnaefx Aa Ijg

Condition: ready for operation (used), Year of construction: 2012, Available immediately from Swiss toolmaking facility: Vertical 5-axis simultaneous machining center Unitech Type: HSM – IC 5 Axis Year of manufacture: 2012 Control: Heidenhain iTNC 530 Table size: 1100 x 600 mm Travel (X/Y/Z): 1080/610/810 mm Rotary table diameter: 600 mm Spindle speeds: up to 15,000 rpm Feed rates: up to 30,000 mm/min Table load capacity: 500 kg Tool holder: BT 40 Magazine: 40 stations Through-spindle coolant (IKZ) 60 bar Chip conveyor Compressed air through spindle Spindle hours: 8,200 / Spindle will be completely overhauled in 2025, then reset to 0 hours Glass scales on X and Y axes Zero point measuring system in rotary table Infrared measuring system Zero point clamping system integrated in rotary table with 10 clamping pots by Schunk Gjdpsx Tq Hnefx Aa Iebg Weight: 10 tons Offered at the price of EUR 15,000 -- plus VAT, ex works

Condition: ready for operation (used), Year of construction: 2001, Immediately available ex location: Vertical Machining Center Sigma Type Zenit 3 Year of manufacture 2001 Heidenhain TNC 426 – M Table 1200 x 500 mm Travel X/Y/Z 1000/500/550 mm SK 40 Tool magazine for 50 tools Spindle speeds up to 12,000 rpm Through-spindle coolant Weight 6.5 tonnes Priced at EUR 7,000,-- plus VAT ex location. Gedpfxox Tq Hhj Aa Isbg

Condition: good (used), Year of construction: 2004, operating hours: 156,897 h, functionality: fully functional, machine/vehicle number: 6006285, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain TNC 426/430, workpiece weight (max.): 7 kg, table width: 800 mm, table length: 1,250 mm, table load: 1,200 kg, rotational speed (max.): 18,000 rpm, overall weight: 12,000 kg, For sale is a vertical CNC machining center, DMG DMC 100 V. The machining center is in good condition. Vertical CNC Machining Center DMG DMC 100 V Technical Data Travel & Work Area X-axis: 1,000 mm Y-axis: 800 mm Z-axis: 500 – 600 mm Table Table size: 1,250 x 800 mm Max. table load: 1,200 kg T-slots: e.g. 14 mm Gbedpfex Tqr Rex Aa Isg Spindle & Performance Max. spindle speed: 18,000 rpm Alternative speeds: 8,000 – 15,000 rpm Spindle taper: SK 40 or HSK-A 63 Spindle power: 15 kW Operating Hours: Control on: 156,896 hrs Machine on: 103,327 hrs Program run: 48,388 hrs Spindle runtime: 46,398 hrs Tool changer: 1,431 hrs Tool Magazine & Change Number of tool stations: 30 pcs. Max. tool weight: 7 – 12 kg Coolant supply: Internal coolant Control & Weight CNC control: Heidenhain TNC 426/430 Machine weight: approx. 12,000 kg

Condition: excellent (used), Year of construction: 2001, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 43,000 m/min, feed rate Y-axis: 43,000 m/min, feed rate Z-axis: 30,000 m/min, table width: 580 mm, table length: 1,150 mm, table load: 900 kg, X - Travel: 1020mm Y - Travel: 610mm Z - Travel: 600mm Table Length: 1150mm Table Width: 580mm Table load: 900 Gedpfx Asx Tfuaja Isbg Feed rate X-Axis: 43000mm/min. Feed rate Y-Axis: 43000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 13kW Speeds / ranges: 8000Rpm ATC / revolver: 30 Number of controlled axis:3 Chip conveyor: yes Coolantsystem: yes Length: 2830mm Width: 2340mm Height: 2683mm Weight: 3600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 1100 mm y-travel 600 mm z-travel 510 mm total power requirement 30 kW weight of the machine ca. 8,5 t dimensions of the machine ca. 4400 x 2250 x 2920 mm Additional information Working area: X-axis travel: 1100 mm Y-axis travel: 600 mm Z-axis travel: 510 mm Rapid traverse: 32 m/min Worktable: 1300 x 600 mm T-slots: 6, size 18, 100 mm spacing Max. table load: 1000 kg Distance from column to spindle center: 600 mm Spindle: 60 - 12000 rpm Drive power: 10/17 kW Spindle taper: ISO 40 / DIN 69871A Magazine: 32 positions Max. tool weight 8 kg Max. tool length 300 mm Max. tool diameter 76/127 mm Tool change time 2.5 sec Space requirements: Length x Width x Height 4400 x 2250 x 2920 mm Weight 8500 kg Equipment and accessories: Heidehain iTNC 530 CNC control Internal coolant system (IKZ): 20 bar Coolant tank: 480 l Chip conveyor Gbsdex S Eczepfx Aa Iog Heidenhain glass scales in X/Y/Z

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,215 h, Control Unit Brand HURCO Model Twin Screen Hurco Max control Main Drive Spindle speed range 18000 Tool taper HSK A63 Movement X-Axis Movement 1067 mm Y-Axis Movement 610 mm Z-Axis Movement 610 mm Additional Equipment Tool Magazine: 40 station ATC Electric swing arm tool changer // Tool Measuring: Renishaw NC4 laser tool probe Spindle Probe: Renishaw RMP400 Coolant: Coolant Through Spindle / Coolant ring nozzles Swarf Conveyor: Swarf conveyor with coolant washdown jets Spindle Chiller: Included Extraction: Filtermist unit FX6002M Coolant gun: Air hose and pistol assembly Air: Air blast Gbodpsx Sz Dzsfx Aa Isg Comfort: Anti-fatigue mat Access: Top hood cover / wide opening doors This Hurco VMX42HSRTi was manufactured in 2022. It features a high-speed 18,000 rpm motorized spindle, HSK A63 tool taper, and a 40 station ATC electric swing arm tool changer. The machine includes a 600 mm rotary table and Renishaw probes for enhanced precision. Ideal for demanding machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2008, operating hours: 8,000 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 540 mm, controller model: HEIDENHAIN TNC 530, table width: 540 mm, table length: 1,120 mm, spindle speed (max.): 8,000 rpm, Model: GX-1000 Year: 2008 S/No.: NVC A8 BOO22 Control: Heidenhain TNC 530 Table Area: 1120 x 540mm X Axis: 1020mm Y Axis: 540mm Z Axis: 540mm Spindle Taper: BT40 Spindle Speed: 8000 RPM 20 Station Tool Changer Motor: 21KW Machine With: Nikken 4rth Axis Swarf Conveyor Gsdpfx Aox Swyroa Iobg Selection Of Tooling

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Godsx Sv I Uepfx Aa Ijbg Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: used, Year of construction: 2012, x-travel 2100 mm y-travel 1020 mm z-travel 762 mm Control Fanuc MXP-200FP spindle speed 6000 U/min spindle capacity ca. 22 kW max. torque on the spindle ca. 550 Nm tool taper SK 50 table surface area 2300 x 1020 mm max. table load 3000 kg T-slots 6 x 22 mm T-slot - distance 150 mm 3-Axis CNC Machining Center Equipment/Accessories: - Automatic tool changer with chain magazine, 40 stations - max. tool-Ø: 120/240 mm - max. tool length: 350 mm - coolant system with internal coolant supply and filter - emulsion mist extraction - electronic handwheel - 2 pcs. magnetic clamping plates 800 x 400 mm - various tool tapers SK50 Gbjdpfjx Sr A Usx Aa Iog - chip conveyor

Condition: used, Year of construction: 2010, travel -x axis 1.000 mm travel -y axis 510 mm travel -z axis 480 mm travel of - x axis (rotary-tilting table) 420 mm travel - x axis (fixed machine table) 450 mm control HEIDENHAIN iTNC 530 Gbsdpfx Aox R U Rxja Ieg turning speed range 50 - 12.000 U/min numbers of positions in the tool changer 20 tool taper SK40 table surface area 650 x 510 mm workpiece weight 300 kg Clamping surface of rotary-tilting table 420 mm workpiece weight 200 kg speeds of rotary table 30 U/min 5-axis machining center | HEDELIUS - RS505 K IC 40/530/450/420/12, equipped with tool changer, ITC, zero-point clamping system and chip conveyor. In addition, the machine features a full enclosure and an extraction system with filter unit. With only 9,787 spindle hours, the unit shows low operating time. The machine is in a well-maintained condition and can be inspected at any time under power. A machine video can be provided on request. Please refer to the offer attachment for further technical details. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: RS505 K IC 40 | RS-505 | RS 505

Condition: used, Year of construction: 2006, controller manufacturer: Haas, Control: Haas Control X Axis Travel: 1016mm Y Axis Travel: 508mm Z Axis Travel: 635mm Max Workpiece Weight: 1558KG Spindle Speed: 8100rpm Table Size: 1219mm x 457mm Tool Change Capacity: 20 Tool Size: BT40 Godpfx Aex R Ux Nja Ijbg Accessories: 4th Axis HRT160, 21 Tool Holders, Swarf Auger.

Condition: used, Bridgeport VP 1000 Vertical machining centre. Heidenhain Control Gbjdpfx Aex R Tvaea Ijg

Condition: used, Year of construction: 2002, x-travel 1.060 mm y-travel 610 mm z-travel 610 mm control Winmax 9 (Upgrade) table-size 1.270 x 610 mm Gbjdex R Enhopfx Aa Ijg max. table load 1.100 kg number of T-slots 5 T-slot - width 18 mm T-slot - distance 100 mm turning speed range - milling ~ 10.000 U/min power capacity - milling spindle 18 / 11 kW tool taper SK 40 Tool changer 24 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 120 mm max. tool length 300 mm max. tool weight 7 kg feed ~ 15,4 m/min rapid traverse X-axis 30 m/min rapid traverse Y-axis 30 m/min rapid traverse Z-axis 20 m/min weight of the machine ca. 7,0 t dimensions of the machine ca. 3,5 x 3,2 x 3 m Machining Center - Vertical HURCO VMX 42

Condition: good (used), Year of construction: 2010, functionality: fully functional, The machine is in good technical condition. Travel in X-axis: 1100 mm Travel in Y-axis: 650 mm Travel in Z-axis: 600 mm Max. spindle speed: 8000 rpm Gjdpfx Aox Rzy Tja Iobg Number of tools in the magazine: 40 Worktable dimensions: 1300 x 650 mm Inspection under power possible by arrangement.

Condition: good (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, Technical Data VESTA-1000/12K Travels Axis travels (X/Y/Z) mm: 1,000 / 550 / 500 Distance table surface – spindle nose mm: 130 – 630 Axis guideways: Linear rolling LM guides Table Working surface mm: 1,100 x 502 Maximum load kg: 700 Table configuration mm: 5x T-slots (width 18 mm, pitch 80 mm) Spindle Maximum speed rpm: 12,000 Spindle power (10 min / continuous) kW: 18.5 / 11 Feeds Rapid traverse (X/Y/Z) m/min: 36 / 36 / 30 Working feed (X/Y/Z) mm/min: 1 – 24,000 Feed motor (X/Y/Z) kW: 1.8 / 1.8 / 3.0 Automatic Tool Changer Tool taper: BT40 Pull stud: MAS P40T-1 (45°) Number of tool stations pcs: 24 Max. tool diameter mm: Ø 80 / Ø 150 (without adjacent tool) Max. tool length / weight mm / kg: 300 / 8 Gbedpfx Ajx Rzhdja Ieg Tool-to-tool change time sec: 2.5 Chip-to-chip change time sec: 4.3 Magazine & changer type: Disc magazine with rotary arm Power Supply Connected load kVA: 30 Tank Capacities For spindle lubrication/cooling l: 6 / 20 For coolant l: 380 Machine Dimensions Height mm: 2,670 Floor space (L x W) mm: 3,335 x 2,200 Weight kg: 6,500 Control System Fanuc 0i-MD Standard Equipment - Spindle air purge - Machine alignment elements - Machine protective guarding - Auger conveyor in working area - Cooling system - Safety doors - Ethernet interface - CNC system software options by HWACHEON: - OPTIMA (feedrate optimization) - HAI (40-block memory, AI nano contour control) - HTLD (tool load monitoring) - HTDC (thermal displacement compensation for spindle and machine frame [HTDC=HSDC+HFDC]) - HECC (accuracy or speed preference in machining) - Centralized lubrication system - Lubricant oil evacuation to dedicated tank - Electronic handwheel - Operating documentation in Czech - Pneumatic system - Program capacity: 1,280m (512kb) - Rigid tapping - 3-color status signal light - Spindle jacket cooling - Air dryer (included) - Work area lighting - 10.4" color LCD display - CE certificate - Transformer - Through-spindle coolant 30 bar - Manual Guide i - Chip conveyor - Workpiece and tool probes - 4th axis direct control by Fanuc CNC system via M-codes (or independent controller usable for another machine)

Condition: used, Year of construction: 2011, DMG DMF 360 Traveling Column Vertical Machining Center Technical features: CNC HEIDENHAIN Ergo line 60-position tool changer Spindle connection din 69871 Axis travels 3600 X 1100 vertical 900 Gsdpfox Rzatex Aa Ijbg Table diameter 1100 mm Spindle power 46 kw 200 nm High pressure 40 bar 980 litre booster tank Ignition hours 33000 Tool contact hours 16000 60-position tool magazine 8000 rpm Year of construction 2011

Condition: used, Year of construction: 2002, VERTICAL MACHINING CENTER SPINNER type VC1020 Year of manufacture: 2002 Main spindle max. speed: 8000 RPM X: 1020 mm Y: 610 mm Z: 610 mm Table: 1200 x 610 mm CNC Siemens Sinumerik 840D with ShopMill function Accessories: - chip conveyor - coolant tank with paper filter - internal coolant supply - external air cooling - 1Gb memory card for large files Gedpsx Rrdvofx Aa Ijbg

Condition: like new (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: i-Series, total height: 2,700 mm, total length: 3,000 mm, total width: 2,300 mm, table width: 1,100 mm, table height: 1,000 mm, table length: 500 mm, table load: 700 kg, overall weight: 5,040 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 346 h, spindle motor power: 18,500 W, spindle nose: BBT40 - BT40, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The HWACHEON VESTA-1000+ guarantees high precision and dynamics thanks to its robust cast iron bed and linear guides. With its powerful 12,000 rpm spindle and optimized software, it is ideal for versatile applications. The machine is in excellent, exceptionally clean condition and has 346 spindle hours (see photos). This HWACHEON VESTA-1000+ is equipped with: - Linear guides - 12,000 rpm spindle (BT40 - BBT40) - Through-spindle cooling - Spindle cooler/chiller - Chip conveyor Gjdpfx Aaox Rpp Ae Isbg - Electronic handwheel - External cooling via nozzles - Tool magazine full of tooling (including 3D probe) and cutting tools - Cuter machine vise - Set of heavy-duty clamping claws The machine can be demonstrated under power by appointment!

Condition: excellent (used), Year of construction: 2014, Datron M8 Cube with rotary swivel table (5 axes) HSC Pro Control V9 Year of manufacture: 2014 Machine operating hours: approx. 8,781 hours Spindle runtime: approx. 8,407 hours 2 kW HF spindle, 6,000 rpm to 60,000 rpm with direct shank tool clamping system HIB HF spindle cooling unit 15-position tool changer 3D probe Renishaw Precision tool length measuring probe Microjet minimal quantity lubrication system with 4-nozzle spray unit Gsdpfx Aaox Rpl Dj Iebg Vacuum table with 500mm x 500mm 1 x T-slot plate 1 x short stroke clamp 3-fold vacuum distributor The machine is in very good condition. The machine can optionally be purchased without rotary swivel table.

Condition: used, Hurco VM30 Vertical Machining Centre. New 2012 Specifications: X: 50" Y: 20" Z: 20" Power: 20 hp RPM: 10,000 RPM # ATC: 20 Table-W: 52" Gjdpox Rkyvofx Aa Iobg Table-L: 18"