Enermetal D.o.o.

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 419.324.012, drilling depth: 1,200 mm, spindle speed (max.): 3,000 rpm, table length: 1,050 mm, table width: 1,050 mm, center height: 1,040 mm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Drilling depth: 1,200 mm Spindle speed (min): 50 rpm Spindle speed (max): 3,000 rpm Feed rate (Row 1): 18 – 160 mm/min Feed rate (Row 2): 35 – 320 mm/min Rapid traverse speed: 3.5 m/min Rated motor speed: 1,400 rpm Table length: 1,050 mm Table width: 1,050 mm Centre height above table: 240 – 1,040 mm MACHINE DETAILS Dimensions (L x W x H): 6,500 x 3,500 x 2,900 mm Electrical data Operating voltage: 380 V Frequency: 50 Hz Connected load: 25 kW EQUIPMENT 3-axis Heidenhain digital readout Itsdpoxm S Idjfx Afpon Coolant system

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 35114, feed length X-axis: 600 mm, feed length Y-axis: 300 mm, feed length Z-axis: 600 mm, spindle speed (max.): 4,000 rpm, drill diameter: 16 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Feed travel X-axis: 600 mm Feed travel Y-axis: 300 mm Feed travel Z-axis: 600 mm Feed travel W-axis: 650 mm Spindle speed (max.): 4,000 rpm Drilling diameter, twist drill: max. 16 mm Single-lip drill: 4 to 16 mm Tapping: max. M12 Table length: 1,000 mm Table width: 680 mm MACHINE DETAILS Control model: HEIDENHAIN TNC 124 DIMENSIONS & WEIGHT Dimensions (L x W x H): 3,500 x 1,500 x 2,100 mm Itodpfx Ajxm S Hyefpjn Total weight: 2,000 kg

Condition: good (used), Bench drill, pillar drill, column drill, column drill -Manufacturer: WMW Heckert, bench drilling machine type BT 2 -Clamping table: 340 x 280 mm -Travel: 350 mm -Spindle holder: MK2 -Projection: 215 mm -Speeds: 355/710/1400/2800 rpm -Column: diameter 93 mm -Spindle stroke: 100 mm / depth stop with fine adjustment -Motor: VEM 0.8/1.0 kW with brake -Voltage: 380 V -Number: 2x drill available Iedpfxoxm Rzij Afpjtn -Price: per piece -Dimensions: 550/480/H1270 mm -Weight:157 kg/piece

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 106840-11, overall weight: 35,000 kg, The drilling process of the deep hole drilling machine uses single-lip drilling. The BW250-T is a deep hole drilling and milling center with two separate spindles for deep hole drilling and milling operations. The machining units are equipped with an additional common travel axis, allowing even smaller workpieces to be machined from four sides on the clamping table without resetting. Drilling and Milling Unit Information: - Number of spindles: 1 drilling spindle and 1 milling spindle - Spindle speed infinitely variable: 0 - 5000 rpm - Spindle drive power: 17 kW at 100% duty cycle S1 operation - Torque: 260 Nm at 100% S1 operation - Max. drilling depth: 1500 mm (in one pass without repositioning) - Drilling diameter: 4 - 40 mm based on ST 60 Travel Paths: - X-axis travel: 2500 mm - Y-axis travel: 1500 mm - Z-axis travel: 850 mm - V-axis travel: 1000 mm Feed rates: - X-axis speed: 10000 mm/min - Y-axis speed: 10000 mm/min - Z-axis speed: 6000 mm/min Swivel Axis Setup for Drilling and Milling Unit: - The drilling and milling unit has a horizontal swivel range of -25° / +15° - 3x steady rests Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 2400 liters - 1x hinge belt chip conveyor - 1x hydraulic power unit and pneumatic unit/equipment - 1x central lubrication - 1x low-pressure pump: Pump output: 100 l/min Pump drive: 5.5 kW - 1x compact band filter: Filter output: 175 l/min For operations in: steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 120 l/min Pump drive: 11 kW - 1x oil mist extraction, Extraction capacity: 2400 m³/h Tool magazine for conventional tools consisting of: - Tool change magazine with intermediate gripper - Tool holder HSK 63 - Max. permitted tool diameter: 127 mm - Max. permitted tool length: 400 mm - Tool storage spaces: 40 Clamping table with X-axis and NC rotary table: - Length/width: 1600 x 2000 mm - Useful load (centered): 15 t - Swing diameter for workpieces: 2800 mm Measuring Equipment - Tool breakage monitoring and length measurement of the BCM tools with automatic compensation in the control system Isdpfsxmh Erjx Afpotn Electrical Equipment Information: - 1x CNC control TNC 640 Failsafe Heidenhain - 1x drilling process monitoring - 1x remote maintenance - 1x dynamic collision monitoring - 1x handheld control device Connection Data: - Operating voltage: 3AC 400V ±10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 65 kW

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Itedjxgu R Ispfx Afpsn Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring

Condition: good (used), Year of construction: 2009, operating hours: 20,709 h, functionality: fully functional, machine/vehicle number: 106516-11, drilling depth: 1,200 mm, overall weight: 7,500 kg, For sale: A very well-equipped deep hole drilling machine from TBT, including various accessories. Drilling specifications: - Spindle 1: 5–18 mm; Spindle 2: 1–4 mm - Drilling depth: approx. 1200 mm with Ø8 mm using 3 steadies Itedpfjxgnhaex Afpsn - Number of spindles: 2 - Spindle drive: Spindle 1: 1 x 4 kW; Spindle 2: 1 x 1.2 kW - Spindle speed: Spindle 1: 600–6000 rpm; Spindle 2: 2000–24000 rpm - Rapid traverse: 15,000 mm/min - Saddle stroke (nominal): 1800 mm - Coolant: Deep hole drilling oil - Tank capacity: 1,100 liters - Operating voltage: 3AC 400V, 50Hz (Total connected load: 25 kW) Condition: Good, appropriate for its age Accessories: Includes drip tray and various drills On-site inspection is recommended!

Condition: used, Year of construction: 2004, Solid drill diameter 200 mm bore depth / mm number of spindles / Technical data Power: 129 kW Control: Siemens NC control Speed range (stepless): 2 - 300 rpm Feed range (in steps): 3 - 4500 mm/min Oil system capacity: 20,000 litres Maximum delivery rate: 1500 l/min Circular diameter in steady rest: 1100 mm Circular diameter over bed: 1250 mm Centre distance: 11000 mm Clamping diameter face plate: up to 1100 mm Max. workpiece weight with one tailstock: 10 t Clamping range of the two steady rests: 150 - 1100 mm Clamping range BOZA: 1 = 200 - 400 mm 2 = 400 - 800 mm Dimensions Min. outer diameter: 406 mm Max. outer diameter: 850 mm Wall thickness: 10–150 mm Max. workpiece length: 11,000 mm Max. workpiece weight: 10 t Max. strength: 800 N/mm² Specific cutting resistance (Ks): 2000–2100 N/mm² Machine data Machine length: 28,800 mm Centre height: 560 mm Swing diameter over bed: 1120 mm Full drilling diameter: 200 mm Core drilling diameter: 350 mm Reaming diameter without drilling: 350 mm Reaming diameter with drilling: 350 mm Headstock: Main drive motor: Siemens Itedpfx Aexgic Eefpsn Type: 1 PH 7228 Performance data at 1,000 min: 113 kW / 1,079 Nm Performance data at 1,150 min: 129 kW / 1,017 Nm Main gearbox: Z-F manual gearbox Type: 2 K210 Switchable gear ratios: i = 1:1 i = 1:4 Fixed gear ratio for spindle: i = 11.68 Max. torque: 50,000 Nm Speed range I: 2...300 min Speed range II: 2 ...75 min

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 106546-11, total height: 3,550 mm, total length: 7,185 mm, total width: 4,720 mm, overall weight: 8,000 kg, The drilling method used by the deep hole drilling machine is single-lip gun drilling. Drilling Unit Information: - Number of spindles: 1 - Spindle speed, infinitely variable: 500 - 8,000 rpm - Spindle drive power: 11 kW at 60% duty cycle - Max. drilling depth: 1,000 mm (in one pass, no retraction required) - Drilling diameter: 3 - 35 mm (based on ST 60) - Drilling diameter / indexable inserts: 40 mm - Max. thread cutting: M27 - Milling material removal rate: 250 ccm/min Travel Paths: - X-axis travel: 1,050 mm - Y-axis travel: 600 mm - Z-axis travel: 800 mm - W-axis travel: 1,250 mm (with 2 steadies) Traverse Speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid System Information: - Coolant supply: deep drilling oil - Tank capacity: 1,200 liters - 1 x scraper-belt chip conveyor - 1 x screw conveyor system - 1 x hydraulic unit and pneumatic unit/equipment - 1 x central lubrication system - 1 x submersible pump: Pump delivery: 200 l/min - 1 x low-pressure pump: Pump delivery: 100 l/min Drive power: 2.2 kW - 1 x compact band filter: Filtration rate: 175 l/min For machining steel and non-ferrous metals - 1 x radial piston pump with remote adjustment: Delivery rate: 2 - 120 l/min Pump drive: 11 kW - 1 x air cooler (heat exchanger): 22.5 kW - 1 x oil mist extraction unit: Extraction capacity: 1,250 m³/h Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with tool holder SK 40 Tool Changer Magazine comprising: - Tool magazine with intermediate gripper - Tool holder SK 40 - Max. permitted tool diameter: 80 mm - Max. permitted tool length: 250 mm - Number of tool storage positions: 80 - 2 x swiveling tool steady rests for guiding and supporting long drilling tools, with automatic positioning to home position. Iedpfx Afoxdm Awopetn Clamping Table with B-Axis and NC Rotary Table: - Length / width: 800 x 600 mm - B-axis: 360° - Positioning accuracy, B-axis: +/- 30 seconds - Table travel: 800 mm - Payload (centered): 1,500 daN Electrical Equipment Information: - 1 x CNC control system, Heidenhain iTNC 530 - 1 x drilling process monitoring - 1 x RENISHAW touch probe Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 26 kW

Condition: used, Deep driller TBT T10-120 Iedpfexbtzzsx Afpetn

Condition: used, Deep driller TBT T10-2-500 Iodpfx Afoxbtzuopetn

Condition: used, Deep driller TBT T10-2-500 Itodpfxexbtznj Afpen

Condition: used, Deep driller TBT T30-3-500 Itedpfoxbtzhox Afpsn

Condition: used, Deep driller SIG BEM8/0.25 Itjdpfx Afoxbtzbjpjn

Condition: excellent (used), Heidenrich & Harbeck B3 SB Deep Hole Borer 10,000mm Capacity, 4 off Steady Rests Itsdpjw U Uhkjfx Afpon 2 off Boring Bar Dampers Swarf Tray & Baskets Tooling, Counter Rotation

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, drilling depth: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,300 mm, rotational speed (max.): 5,600 rpm, TECHNICAL DETAILS Drilling Data Drilling depth: 1,500 mm Axis Data X-axis travel: 3,000 mm Y-axis travel: 1,200 mm Z-axis travel: 1,300 mm X-axis feed rate: 15 m/min Y-axis feed rate: 15 m/min Z-axis feed rate: 15 m/min Feed force: 30,000 N Rapid traverse speed: 15 m/min Spindle Data Speed: min. 300 rpm Speed: max. 5,600 rpm Table Data Clamping surface: 2,000 mm x 1,250 mm Number of T-slots: 7 Table load capacity: 12,000 kg Itodpfew Izr Ajx Afpon Tool holder: SK50 MACHINE DETAILS Control: TNC430 Dimensions & Weight Dimensions (L x W x H): 8,400 x 8,300 x 4,500 mm Total weight: 30,000 kg EQUIPMENT Stepless speed adjustment Drill bit grinding machine Note: Dismantling and loading can be offered for €8,000.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 106729-11, total length: 8,880 mm, total width: 6,360 mm, total height: 4,700 mm, overall weight: 34,000 kg, The drilling method used by the deep hole drilling machine is single-lip drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 0 - 8000 rpm - Spindle drive power: 17 kW at 100% ED S1 operation / 20 kW S6 operation - Maximum drilling depth: 1800 mm / 2100 mm with pilot drilling without drill bush holder - Minimum/maximum drilling diameter: 4 - 40 mm based on ST 60 - Maximum thread cutting: M30 - Milling material removal rate: 475 cc/min Traverse Axes: - X-axis travel: 2000 mm - Y-axis travel: 1000 mm - Z-axis travel: 2200 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil, type HSD 400 - Total capacity: 2400 liters - 1x hinged belt chip conveyor - 1x screw conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x oil mist extraction unit - 1x central lubrication: Central lubrication unit for oil impulse lubrication - 1x submersible pump: Pump flow rate: 200 l/min Pump drive: 1.1 kW - 1x submersible pump: Pump flow rate: 500 l/min Pump drive: 2.2 kW - 1x submersible pump: Pump flow rate: 100 l/min Pump drive: 5.5 kW - 1x compact band filter: Filtering capacity: 175 l/min For machining steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 120 l/min Pump drive: 11 kW - 1x water cooler: Iedpfx Afew Htirspstn Cooling capacity: 30 kW Milling and Drilling Spindle Unit: - Spindle housing with AC motor spindle - The position of the machining unit on the Y-column enables true 4-side machining at table center - Swivel axis device, swivel range: -30°/+15° 2x manual steady rests: - On guide rails with manual positioning - Can be swiveled away and manually opened and closed Drill bush holder: - Precise changeover between deep hole drilling with drill bush and conventional machining, or deep hole drilling with pilot drilling - Automatic drill bush holder change via standard tool magazine Pickup Tool Magazine: - For standard tools - 36 tool storage positions - Max. tool holder: HSK 63 / Max. permitted tool diameter: 100 mm / Max. permitted tool length: 300 mm - Tool transfer from magazine to spindle via NC-controlled spindle positioning - 1 slot for drill bush holder Clamping Table with X-Axis and NC Rotary Table: - Length/width: 1250x1250 mm - 360° rotary workpiece table - Load capacity (centered): 10 t - Workpiece swing diameter: 2000 mm Electrical Equipment Information: - 1x CNC control Sinumerik 840D SL (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3-phase 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 40 kW

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW Itodpfx Afjw E H E Rspon - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 6207 20.57, workpiece weight (max.): 3,000 kg, spindle speed (max.): 4,000 rpm, table length: 1,675 mm, table width: 700 mm, quill travel distance: 1,000 mm, TECHNICAL DETAILS Travel Paths and Drilling Motion Quill travel z: 1,000 mm Vertical drilling unit: 800 mm Traveling column in drilling direction w: 1,100 mm Table and Axes Table transverse travel x: 1,000 mm Table size: 1,675 x 700 mm Table load capacity: 3,000 kg Ijdpfew Elrvex Afpstn Spindle and Machining Tool holder: SK40 Spindle speed: 100 to 4,000 rpm Drilling capacity in steel: 32 mm Thread cutting: M24 MACHINE DETAILS Power connection: 7.5 kW Dimensions & Weight Weight: 4.8 t Footprint: 3,500 x 6,000 x 2,400 mm Transport dimensions without enclosure: 2,400 x 6,000 x 2,400 mm

Condition: refurbished (used), Year of construction: 2019, TECHNICAL DETAILS Drilling depth: 1,000 mm Solid drilling range: 30 mm Boring range: 40 mm Spindle speed: 670 - 3,560 rpm Center height over bed: 380 mm Center height over floor: 1,400 mm Table length: 1,200 mm Itodpfxew Ekfue Afpsn Table width: 1,200 mm Cross table travel: 2x400 mm Center height above table: 250 – 600 mm Z-Axis Feed rate: 0-7,000 mm/min W-Axis - 400 mm Feed rate: 0-7,000 mm/min X-Axis - 800 mm Feed rate: 0-2,000 mm/min Y-Axis - 350 mm Feed rate: 0-3,000 mm/min Rapid traverse speed: 3.5 m/min Motor rated speed: 8,000 rpm Motor rated power: 18.5 kW MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Connected load: 40 kW Total length: 6,500 mm Total width: 3,500 mm Total height: 2,900 mm Weight: 8 t EQUIPMENT Manufacturer: Siemens Sinumerik 840 Dsl Includes 1,700 l coolant system 20 single-lip drills from D=6 mm–20 mm/lengths from 1,200–1,750 mm Operating hours: 13,000 h

Condition: ready for operation (used), Year of construction: 2017, Deep hole drilling machine Machine type: Samag TFZ 2L-1000 Control system: Year of manufacture: 2017 TECHNICAL DATA: Speed range: 6,000 rpm Itsdpjw Ecftofx Afpsn Drive power: 13 kW Maximum drilling diameter: 36 mm Maximum drilling depth: 1,250 mm Travels: X-axis: 1,600 mm Y-axis: 1,050 mm Z-axis: 1,100 mm Max. workpiece weight: 7,000 kg Max. workpiece length: 1,600 mm Milling & deep hole drilling Design with double ball screw drive Coolant system & filtration Tool package

Condition: used, Year of construction: 2004, Ixion deep hole drilling machine. There is currently a problem with the control system that needs to be repaired. Itedpfxjw D Snue Afpen

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 106 155 - 11, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Ijdpfow Agqhjx Afpjtn Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Year of construction: 1999, fabric-no. 23989 total power requirement 8,8 kW weight of the machine ca. 9,1 t Iedpfx Aowzyt Hefpotn

Condition: excellent (used), functionality: fully functional, drilling depth: 2,000 mm, feed length X-axis: 3,250 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 500 mm, total length: 8,000 mm, total width: 6,000 mm, total height: 4,300 mm, overall weight: 45,000 kg, feed rate X-axis: 8 m/min, feed rate Y-axis: 8 m/min, feed rate Z-axis: 8 m/min, spindle speed (max.): 4,200 rpm, drill diameter: 40 mm, spindle motor power: 17,000 W, table length: 2,000 mm, table width: 2,500 mm, table load: 50,000 kg, feed length W-axis: 500 mm, Heidenhain 530 CNC Control Drilling depth (V): 2,000 mm Longitudinal travel (X): 3,250 mm Vertical travel (Y): 1,500 mm Iodpfewzw Ihjx Afpjtn Transverse travel (Z) threading axis: 500 mm Workpiece approach (W): 500 mm Rapid traverse speed X, Y, V: 8,000 mm/min "IMSAUTOROTATION" rotary-translating table: 2,000 x 2,500 mm Maximum table load (rotating workpiece – clamped on axis): 30,000 kg Maximum load (stationary workpiece): 50,000 kg Drilling head tilt (C): +/-20° ISO 50 spindle taper Spindle motor power (drilling and milling): 17 kW Spindle speed: 4,200 rpm Solid drilling diameter (min) drill Ø: 6 mm Solid drilling diameter (max) drill Ø: 40 mm Tool magazine: 20 stations Floor space required (approx.): 6,000 x 8,000 mm Height: 4,300 mm Total machine weight (approx.): 45,000 kg Complete with: - Optical scales (X, Y) - Drilled plate 2,200 x 2,500 mm, thickness 70 mm - Gun drills with bushings - High pressure 80 bar - Full oil-tight enclosure - Chip conveyor USED MACHINE

Condition: good (used), Year of construction: 2006, feed length X-axis: 1,650 mm, feed length Y-axis: 1,000 mm, Max. drill Ø steel: 5 - 40mm X - Travel: 1650mm Y - Travel: 1000mm Iedpfjwyup Tsx Afpotn W - Travel: 500mm Table size L x W / or ø:1200 x 1500mm Spindle taper: SK40Mk Speeds / ranges: 4200Rpm Length: 6500mm Width: 3800mm Height: 3400mm Weight: 6500kg