Tecnocava

Condition: new, Year of construction: 2026, operating hours: 20 h, functionality: fully functional, machine/vehicle number: RR400FS, area performance: 1,350 m²/h, overall weight: 80 kg, power: 0.3 kW (0.41 HP), battery voltage: 24 V, sweeping width: 350 mm,

Condition: excellent (used), Vötsch Type: VC 7018 Vötsch Climatic Test Chamber VC 7018 Water-Cooled Touch Panel Control Unit On the touch panel control unit, all control and operating commands can be triggered by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with port holes on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Feedthrough included in standard equipment R1: NW 125 mm L1: NW 50 mm Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Characteristics for temperature tests: Temperature range: -70°C to +180°C Temperature ±0.1 to ±0.5 K Hedpezh Huhefx Anpjp Spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Characteristics for climatic tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.h. F. Temperature deviation over time in the center of the usable space ± 0.1 to ± 0.3 K Temperature deviation over space ± 0.5 to ± 1.0 K Temperature gradient 1 to 2 K Humidity deviation over time in the center of the usable space ± 1 to ± 3 %RH Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10 50Hz Nominal power: 5.9 kW Nominal current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Refrigerants: R-404A and R-23 Test chamber capacity: approx. 190 liters Weight: approx. 460 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 1997, Bridgeport VMC 800/22 CNC Vertical Machining Centre With Heidenhein TNC 426 Control Hodpfjzh Hubox Anpsp Table Dimension 1,000 x 490mm (5 'T' Slots). Maximum Table Load 750kg. Axis Travel 'X'=800mm, 'Y'=510mm, 'Z'=500mm. Maximum Spindle Speed 6,000rpm (11kW Motor). Spindle Taper BT40. 22 Position ATC. S/No. 720971 (1997). With Coolant System, Spindle Probe Interface, 2 Heavy Duty Machine Vices (Jaw Width 200mm) & Quantity Of Toolholders. Weight 3,600kg

Condition: excellent (used),

Condition: ready for operation (used), Year of construction: 1982, feed length X-axis: 1,500 mm, feed length Y-axis: 700 mm, feed length Z-axis: 550 mm, spindle speed (max.): 2,066 rpm, overall weight: 4,000 kg, 3-axis visual accuracy Table: 2000 x 460 mm Hsdpfx Aozh Ht Dsnpep Travel: 1500 x 700 x 550 mm Maximum spindle speed: 2066 RPM Weight: 4000 kg

Condition: excellent (used),

Condition: excellent (used),

Condition: excellent (used),

Condition: excellent (used), Year of construction: 2008, functionality: fully functional,

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: VG033-25dv, grinding width: 60 mm, grinding height: 530 mm, New, unused SAND1 beam sanding machine, available due to a change in company policy; the machine was never unpacked. Sanding is performed on the underside. Top belt with pneumatic lift and automatic centering according to the size of the workpiece. At the base, a series of rubber idler rollers to prevent damage to the wood surface. The machine can be operated in both directions, eliminating the need to turn the beam; the beam simply needs to be tilted. Top belt with pneumatic, self-centering lift according to the size of the workpiece. LOWER SANDING UNIT Cushioned, suitable for beams, with a belt length of 1,900 mm. The pad is equipped with a time-controlled inlet controlled by a PLC. High-power motor (11 kW) with fixed speeds and oscillation of the sanding belts. 2 suction ports, 120 mm in diameter. ELECTRICAL CABINET integrated into the machine structure. All components are of the highest quality and supplied by international companies to ensure easy availability in the market. CONTROL PANEL equipped with a 7.5" TOUCHSCREEN programmer for managing all machine functions. Technical data in the attached PDF. Hodpfx Aezh Hr Tonpjp Includes 4 roller conveyors, 3 x 0.6 meters.

Condition: good (used), Year of construction: 2012, operating hours: 5,800 h, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 630 mm, controller manufacturer: Heidenhain, controller model: 530, table width: 560 mm, table length: 1,150 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 5,800 h, coolant supply: 20 bar, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is in good condition! The machine was sold due to the owner's retirement. Hodpfozh Hr Hex Anpep

Condition: used, Year of construction: 2009, CNC grinding machine Type/Model: Ri 8-4 Hsdpezh Hrtefx Anpjp Year of manufacture: 2009 Operating hours: 25,726 h Technical data Rotary table diameter: 800 mm Max. grinding/turning diameter: approx. 1,000 mm Max. grinding/workpiece height: approx. 700 mm to 800 mm Max. table continuous load: 2,000 kg Rotary table (C-axis) & guide Bearing: Hydrostatic guides in the X and C axes for maximum damping and wear-free operation Table drive: Direct drive Speed range: 0.01 to 200 rpm Positional accuracy: ± 1.5 arc seconds (smallest increment: 0.0001°) Tool holder & spindle (turret head) Number of spindle positions: up to 4 grinding spindles/tool positions in the automatically swiveling turret head CNC control & axis drives Standard control: Siemens Sinumerik 840D with extended KERN grinding application software X-axis: Linear drive Travel distances (approximate values) X-axis (horizontal): approx. 1,200 mm Z-axis (vertical): approx. 700 mm Dimensions & weight Machine weight: approx. 18,000 kg + peripherals

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2426, Equipment: CE marking, Band Saw for Pallet Dismantling – VALTER BAND SAWS 1800 P-SP If you are looking for a robust and efficient industrial solution for cutting and dismantling standard or non-standard wooden pallets, this is the ideal machine. *Work Table Dimensions: 1800 x 2000 mm *Horizontal Cutting Capacity: 1500 mm *Vertical Cutting Capacity: 150 mm *Blade-to-Column Distance: 490 mm *Blade Motor Power (with brake): 10 HP *Blade Speed: 400 m/min *Automatic hydraulic blade tensioner with safety limit switch *Hydraulic Oil Tank Capacity: 30 liters (1 HP pump motor) *Operating Pressure: 40 bar *Total Machine Weight: 2000 kg Hjdpfx Ajzh Hrmsnpop *Electrically welded steel structure with vertical movement via ball-recirculating linear guides for straight, uniform, and precise feed: *Micro-mist oil blade lubrication system (prepared for compressed air connection) to maximize blade life. *Tungsten carbide blade guide adjustable according to the type of pallet being processed. *Also prepared for dust extractor connection. *Dual Operator Station: Designed for safe operation with 2 operators (one for loading and one for unloading with a dedicated emergency stop button). CE CERTIFIED SAFETY The machine is equipped with advanced active and passive protection systems: *Self-braking motor that stops the blade in less than 5 seconds (3 seconds at maximum speed). *Safety microswitches in case of blade breakage or guard opening. *Electronic device against excessive motor strain. *Low-voltage controls and dual emergency stop buttons. Machine can be viewed by appointment. Price is ex-works, with transportation costs borne by the buyer.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, KUKA KR 240-2 2000 robot, serial number 910452, industrial robot including control cabinet 57273. The KUKA KR 240-2 robot is a {axis}-axis robot arm, with a payload of 240 kg and a reach of 2700 mm. Manufacturing applications include palletizing. Common applications for the KUKA KR 240-2 include: additive manufacturing, assembly, dispensing, polishing, material handling, palletizing, and remote TCP. Specifications: Brand: KUKA Model: KR 240-2 2000 Type: Robot arm Axes: 6 Payload: 240 kg Reach: 2700 mm Repeatability: 0.06 mm Weight: 1267 kg Serial number: 910452 Control cabinet: 57273 Year of manufacture: 02/2008 Used item – shows normal signs of wear. Further details, article numbers, and images available upon request. Hedpfx Anjzh Hq Njpop Two-week start-up guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected. Free loading / ex works. The stated amount is net. The legally required VAT of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Local pickup in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries upon request – Please provide the country, city, and postal code. Freight costs upon request – Please provide the delivery address.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1234, overall weight: 1,008 kg, power: 37 kW (50.31 HP), pressure (max.): 8 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, Equipment: refrigerant dryer, type plate available, Kaeser BSD 72 T screw compressor with integrated refrigerated air dryer – 37 kW – manufactured in 2007 Manufacturer: Kaeser Kompressoren Model: BSD 72 T Year of manufacture: 2007 Major service performed in January 2026 For sale is a used Kaeser BSD 72 T screw compressor with an integrated refrigerated air dryer. The unit comes from a food processing plant and is in good technical condition. Technical data * Manufacturer: Kaeser Kompressoren * Type: BSD 72 T * Year of manufacture: 2007 * Drive power: 37 kW * Rated speed: 2,960 rpm * Max. operating pressure: 8 bar * Ambient temperature: +3 °C to +45 °C Integrated refrigerated air dryer * Model: Kaeser ABT 72 Hsdpjzh Hq Asfx Anpep * Year of manufacture: 2007 * Refrigerant: R134a * Charge: 2.2 kg * Max. air system pressure: 16 bar * Refrigeration circuit, high pressure: 21 bar * Refrigeration circuit, low pressure: 16 bar * Mains connection: 400 V / 3 Ph / 50 Hz Scope of delivery * Kaeser BSD 72 T screw compressor * Integrated Kaeser ABT 72 refrigerated air dryer Condition The machine is in good used condition and was fully functional until it was dismantled. An inspection can be arranged at any time by appointment. We would be happy to provide you with further information and photos upon request.

Condition: used, Year of construction: 2002, total length: 5,700 mm, total width: 1,600 mm, total height: 2,800 mm, Colour: White Weight: 750 kg - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 32604 - Max. cutting height vertical [mm]: 2070 - Max. cutting height horizontal [mm]: 4600 - Max. cutting depth [mm]: 60 Hodpfxjzh Hqvj Anpjp - Min. saw blade diameter [mm]: 240 - Max. saw blade diameter [mm]: 250 - Arbor saw blade diameter [mm]: 30 - Horizontal cutting: Yes - Vertical cutting: Yes - Voltage [V]: 400 - Current consumption [A]: 8.4 - Fuse [A]: 16 - Power [kW]: 3.0 - Transport dimensions: 5700mm x 1600mm x 2800mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Konica Minolta Accurio Press C 4070 with 1.8 million copies, fully equipped, in good condition, tested, and ready to print. Equipment: - DF 713 - UK 112 Hodpjzh Hqpefx Anpep - PF 707m - HT 506 - FS 532 m - RU 518 m - HT 511 - Fiery IC 609 As an experienced retailer of used copiers, we have developed genuine expertise in packing and pallet/container shipping to guarantee that our customers receive machines in perfect condition. Our company offers the largest range of production copiers and handles worldwide deliveries upon request. Please do not hesitate to contact us for further information.

Condition: good (used), Machine spirit level, block spirit level, frame spirit level, straightedge level, precision spirit level, frame straightedge level, precision machine spirit level -Manufacturer: Herlitzius, Precision machine spirit level Hedpfx Anozh Hqispsp -Reading: 0.40 mm/m -Box dimensions: 180/70/H50 mm -Weight: 1.0 kg

Condition: used, Year of construction: 2000, total length: 4,100 mm, total width: 1,050 mm, total height: 2,400 mm, Colour: Grey Weight: 485 kg - Year: 2000 - Documentation available: No - CE marking present: Yes Hjdszh Hqcjpfx Anpsp - CE certificate present: No - Serial number: 5005DW - Max. cutting height horizontal [mm]: 1550 - Max. cutting width [mm]: 3200 - Max. cutting depth [mm]: 55 - Min. saw blade diameter [mm]: 250 - Max. saw blade diameter [mm]: 250 - Arbor saw blade diameter [mm]: 30 - Horizontal cutting: Yes - Vertical cutting: Yes - Voltage [V]: 400 - Current consumption [A]: 5 - Fuse [A]: 16 - Power [kW]: 2.2 - Transport dimensions: 4100mm x 1050mm x 2400mm (l x w x h) - Transport weight [kg]: 485kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2002, total length: 5,100 mm, total width: 1,250 mm, total height: 2,950 mm, Colour: Grey Weight: 610 kg - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 0201515 - Max. cutting height horizontal [mm]: 2100 - Max. cutting width [mm]: 4200 - Max. cutting depth [mm]: 55 - Min. saw blade diameter [mm]: 250 - Max. saw blade diameter [mm]: 250 - Arbor saw blade diameter [mm]: 30 - Horizontal cutting: Yes - Vertical cutting: Yes - Voltage [V]: 400 - Transport dimensions: 5100mm x 1250mm x 2950mm (l x w x h) - Transport weight [kg]: 610kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Hjdpfszh Hp Sjx Anpsp

Year of construction: 2001, condition: good (used), Capacity: 1000 liters Hjdpfxezh Hp Eo Anpop Maximum operating pressure: 11 bar Tank diameter: 800 mm Height: 2350 mm Weight: approx. 150 kg Condition: good, second-hand

Condition: good (used), Solenoid valve, disc valve, flap valve, electromagnetic valve, solenoid valve, solenoid valve, poppet valve Hedszh Hpxopfx Anpop -Manufacturer: Ross, Control valve, Solenoid valve, Disc valve -Type: D2771B9011 -Voltage: 24 VDC -Pressure: 2-10 bar -Dimensions: 310/220/H140 mm -Weight: 6.9 kg

Condition: good (used), Machine spirit level, block spirit level, frame spirit level, alignment level, precision spirit level, frame alignment level Hedpfxezh Hprs Anpop -Machine spirit level: Frame spirit level -Frame size: 205 x 40 mm -Reading: 0.02 mm/m -Dimensions: 205/205/40 mm -Weight: 3.3 kg

Condition: good (used), Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker, motor contactor -Manufacturer: Siemens, Sirius Contactor Auxiliary Switch Block Power Contactor -Type: 3RT1045-1AL24 3ZX1012-0RT04-1AA1 Hsdpfx Aozh Hplenpjp -Number: 1x contactor available -Cardboard dimensions: 210/150/H80 mm -Weight: 1.9 kg

Condition: ready for operation (used), Year of construction: 2014, operating hours: 19,865 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: FANUC, controller model: Series 31i-model B, total height: 3,422 mm, total width: 7,297 mm, table load: 1,500 kg, overall weight: 18,000 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 40, tool weight: 30,000 g, product length (max.): 3,780 mm, number of axes: 4, This 4-axis DOOSAN NHP6300 was manufactured in 2014. It features an impressive X-axis travel of 1,050 mm, Y-axis travel of 900 mm, and Z-axis travel of 1,000 mm. The machine includes a maximum pallet load of 1,500 kg and a tool capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the DOOSAN NHP6300 horizontal machining centre we have for sale. Contact us for further details. • Distance from top of pallet to spindle center: 100–1,100 mm • Distance from pallet center to spindle nose: 75–975 mm • Pallet • Type: Indexing (rotary) • Indexing angle: 1° • Size: 630 × 630 mm • Maximum load: 1,500 kg • Mounting pattern: 24 × M16 × P2.0 {5–18H8} • Maximum workpiece size (Ø × H): Ø1,050 × 1,350 mm • Spindle • Speed: 10,000 rpm (options: 6,000 / 15,000 rpm) • Taper: ISO 50 (7/24 taper) • Maximum torque: 489 Nm (options: 599.8 / 350 Nm) • Feed rates • Rapid traverse (X/Y/Z): 60 / 60 / 60 m/min • Maximum cutting feed: 30,000 mm/min • Automatic Pallet Changer (APC) • Number of pallets: 2 • Type: Rotary shuttle • Change time: 12 s • Drive: Servo motor • Automatic Tool Changer (ATC) • Tool interface: BT / CT / DIN (HSK optional) • Magazine type: Chain • Standard capacity: 40 tools (options: 60 / 90 / 120 / 150) • Matrix magazine capacity: 196 / 256 / 316 / 376 tools • Maximum tool diameter: Ø130 mm (Ø125 mm per note) • Maximum tool diameter with adjacent pockets empty: Ø320 mm • Maximum tool length: 630 mm (HSK: 700 mm) • Tool-to-tool change time: 2.0 / 3.5 s • Chip-to-chip change time: 5.0 / 6.5 s Hjdezh Hpfepfx Anpep • Motor power and utilities • Spindle motor: 25 / 30 kW (options: 22 / 30, 50 / 55 kW) • Compressed air supply: 0.54 MPa • Tank capacities • Coolant: 925 l • Lubrication: 7.2 l Additional equipment • Fastems automation system Technical Specification Taper Size ISO 50