PK d.o.o.

Condition: ready for operation (used), Year of construction: 2017, This KOIKE PNC 13 extreme plasma cutting machine was manufactured in 2017. It features a complete plasma cutting system with a water tank and base frame, an oxyfuel torch tested only once, and includes software for nesting and programming. The Hypertherm Powermax 1250 power supply ensures reliable operation. Contact us for more information. Application Types Cutting Fjdsx S Skfepfx Agmsft

Condition: good (used), Year of construction: 2011, 4-Axis CNC Plasma Cutting System Control: Multi-axis CNC control Lantek Expert Cut Plus Simultaneous axis movement 2D plasma torch carriage with height sensor Gantry width: 1,500 mm Max. sheet size: 1,500 x 3,000 mm Max. traverse speed: 40,000 mm/min (X, Y) Axes on rack-and-pinion guidance with linear measurement system Fodpfjx S Htnsx Agmjft X-axis: transverse axis (torch horizontally on gantry) Y1/Y2 axes: longitudinal axes (gantry movement) Z-axis: vertical axis (torch vertically on gantry) With TAG (Torch Initial Control Setting) Plasma source: Kjellberg HiFocus 130 Torch connection: PerCut 200 plasma torch Plasma gases: oxygen, argon, hydrogen, nitrogen Marking gas: argon Swirl gas: oxygen, nitrogen, hydrogen, F5 Power source: HiFocus 130 400V ArH2N2 / O2 Cutting current: 20 – 130 amps Marking current: 16 amps Connected load: 32 kVA Fuse protection: 5 amps Cutting capacity unalloyed steel: 1 – 30 mm Piercing with hole-piercing process: 1 – 25 mm Cutting capacity alloyed steel: 1 – 20 mm Cutting capacity aluminum: 1 – 25 mm Simultaneous axis movement for up to 4 axes Programming possible during cutting process Graphic display with cut simulation Includes CAD-CAM software package Lantek Expert CUT Plus The machine can be inspected under power at any time by appointment.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 245, type of input current: three-phase, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, working width: 2,000 mm, working length: 6,000 mm, color: red, Equipment: documentation/manual, lighting, For sale: an excellent plasma gas-oxygen cutting machine from a renowned brand with 8000W power. STIGAL DYNAMIC SPEED, Cebora 165. Manufactured in 2012, 400V supply voltage. Serial number 245. The cutting machine is in continuous operation and regularly serviced. Fully operational! Technical specifications of the STIGAL DYNAMIC SPEED plasma cutter: working area (L x W): 6000 x 2000 mm, positioning accuracy: +/- 0.05 mm, travel speed: 22 m/min, maximum power consumption: 8000 W. Viewing is welcome. Fodpfsx S E Nzex Agmsft

Condition: used, Year of construction: 2013, functionality: fully functional, Cutting range for steel: 1–38 mm Cutting range - x: 3000 mm Cutting range - y: 1500 mm Cutting medium: HiFocus 161i CNC control: MicroStep Total power requirement: 6 kA Approx. machine weight: 3,500 kg Ffsdpox Sqy Sofx Agmst Description: MicroStep CNC guiding machine MasterCut Eco A Plus 3001.15 (3000 x 1500 mm) MicroStep® CNC control unit iMSNC with integrated network card - LCD operator panel mounted on the gantry - Laser pointer with automatic offset transfer - iMSNC control parameter database / Windows® - "AsperWin-Basic" programming system for direct programming at the machine control - "AsperWin Select" macro library module - "AsperWin NC-Sim" NC simulator module - "Plasma Marking" module (for center-punching) via plasma source - "THC" module / automatic height control via arc voltage - CNC oxy-fuel cutting table with sectional extraction / 3000 x 1500 mm - USB 2.0 interface for external storage devices - MicroStep® "iFDS Win" remote diagnostics module, remote maintenance access via TeamViewer - HiFocus 161i plasma source from KJELLBERG with automatic gas console and ContourCut Speed technology - Plasma torch connection (PBA) for HiFocus 161i, automatic gas console for HiFocus 161i / FlowControl - Module for controlling the automatic gas console HiFocus 161i - Marking module for HiFocus 161i - CNC interface for HiFocus 161i / integration with CNC control - Module for automatic current control for HiFocus 161i - Kemper extraction unit type 810800080 - Remote control of a Kemper filter system, incl. software activation Oxy-fuel: - 1 x oxy-fuel support Eco - Central gas control via proportional valves and parameter database for 1 torch - Power supply cables and gas hoses for heating oxygen, cutting oxygen, and acetylene - RHÖNA-FIT+ acetylene machine cutting torch (optionally also propane) - 1 tool set for oxy-fuel - 1 capacitive height control IHT (intelligent height control) for oxy-fuel technology - 1 electric ignition unit for RHÖNA acetylene - 1 x active collision protection - Standalone MMI control console - 1 x quick-change head for the PerCut 211 plasma torch - Initial set of consumables for Kjellberg® plasma source HiFocus 161i KAESER compressed air screw compressor Aircenter 8 and accessories for the central air supply of the complete MicroStep CNC plasma cutting system: - Aircenter 8 - ECO DRAIN - Condensate treatment system type: Aquamat CF 3

Condition: used, Esprit Lightening D CNC Plasma Cutter, tank approx 3700mm x 1650mm, control Esprit Edge Hypertherm H3P2 1156-0101-02. Power unit Hypertherm POWMAX 1250 G3 series. from a training centre, exceptional good condition, very little use. Fedpfx Agsx R Tvmomsft

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 5125 mm Measurements height 2100 mm Control Unit Brand ESAB Model EPP-360 Vis 51 Fodsx R E Smepfx Agmsft Main Drive Spindle speed range 50.8–25000 mm/min Number of axis 3 This 3-axis ESAB Combirex DX 4000 plasma cutting machine was manufactured in 2012. It features the ESAB WELDING & CUTTING Vission 51 control and a Precision Plasmarc 368 plasma source. Capable of cutting up to 40 mm with plasma and 300 mm with gas, it offers a cutting area of 3000 × 13000 mm. Consider the opportunity to buy this ESAB Combirex DX 4000 plasma cutting machine. Contact us for more information. Application Types Cutting

Condition: new, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 60 mm, kaitec Smart – CUTTING TECHNOLOGY BY PROFESSIONALS FOR PROFESSIONALS Fodpfox Ngn Tsx Agmjft With the highly economical plasma process, material thicknesses of up to 25 mm can be cut optimally. Automatic initial height detection, automatic arc control, and intelligent collision protection ensure maximum quality and the highest possible repeatability. The automated program sequence and the long service life of the consumables help to actively and significantly minimize cutting costs. The oxy-fuel process also impresses with its ease of use and functionality. Thanks to the automatic piercing function, preheating times and the activation of cutting oxygen are controlled by CNC. This allows sheets up to 80 mm thick to be cut very cost-effectively. The oxy-fuel system is available for acetylene or propane and is equipped with automatic height control. kaitec Smart – WATER TABLE SYSTEM The foundation of the flatbed design is a stable water table. The longitudinal guide mechanism is mounted with high precision on milled surfaces. The sturdy cutting grate features offset, serrated support blades, providing optimal sheet metal support and reducing slag formation on the workpiece as well as excessive wear of the blades, which saves real money on rework and maintenance. The depth of the trough is precisely designed to accommodate slag and ensure effective cooling; it is easy to clean and captures the dust produced during cutting. Cutting area: 1,500 x 1,500 mm 1,500 x 3,000 mm 1,500 x 4,000 mm Plasma material thickness: 1–25 mm Oxy-fuel material thickness: 10–80 mm Price: Machine price depending on configuration, tailored to your requirements from €38,900 plus plasma unit, transport & installation We look forward to your inquiry!

Condition: new, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 50 mm, kaitec Easycut – PLASMA & OXYFUEL CUTTING PERFECTION FOR METAL & STEEL CONSTRUCTION The kaitec Easycut is a highly flexible CNC gantry cutting system, specifically developed for cutting material thicknesses between 1 and 50 mm. Thanks to its space-saving flatbed design, it is ideally suited for a wide range of applications. The double-sided driven machine gantry ensures exceptional cutting results through high rigidity and precise mechanical guidance. Available in three cutting area sizes, the kaitec Easycut can be tailored exactly to your sheet metal processing needs. It impresses with its great flexibility in the compact cutting machine segment. kaitec Easycut – WATER TABLE SYSTEM The robust water table forms the basis of the flatbed design. The precisely aligned longitudinal guides and the sturdy, serrated cutting grate reduce slag, protect the slats, and minimize maintenance costs. Fodpfjx Ngnysx Agmoft Optimized tank depth enables efficient slag collection and cooling. In addition, the system is easy to clean and reliably captures cutting dust. kaitec Easycut – PROFESSIONAL CUTTING TECHNOLOGY FOR PROFESSIONALS With its highly efficient plasma process, material thicknesses up to 25 mm can be cut precisely and cost-effectively. Automatic initial height sensing, arc voltage control, and intelligent collision protection ensure maximum quality and repeatability. The automated cutting process and long consumable life notably reduce operating costs. The oxyfuel process also impresses with straightforward handling and reliable functionality. The CNC-controlled piercing function optimizes preheating times and automatically regulates the oxygen supply, enabling sheets up to 50 mm to be cut efficiently. The oxyfuel system is available for acetylene or propane gas and features automatic height control for consistently precise cutting results. Cutting Area: 1,500 x 3,000 mm Material Thickness Plasma: 1-25 mm Material Thickness Oxyfuel: 10-50 mm Price: Machine price depending on equipment, tailored to your requirements from €29,900 plus plasma unit, transport & installation We look forward to hearing from you!

Condition: new, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 60 mm, kaitec 1530 – Your Ultimate Solution for Precision Cutting! Are you looking for the best entry-level machine on the market? Your search ends here! With the kaitec 1530 plasma cutting system, you gain access to unrivaled cutting performance and unbeatable flexibility. No more reliance on external cutting services or dealing with lengthy lead times from suppliers. The kaitec 1530 plasma cutter is designed to give you full control over your cutting requirements. Its intelligent material utilization will save you money and reduce unnecessary transport costs. Say goodbye to long waits for your orders – you control the delivery schedule and work at your own pace. Our kaitec 1530 cutting system has taken the industry by storm—and for good reason. It combines performance, flexibility, and cost efficiency like no other. Eliminate dependency and delays—choose the kaitec 1530 plasma cutting system to boost your productivity, save costs, and accelerate your workflow. Welcome to the future of cutting! kaitec 1530 – Precision and Versatility for the Future of Cutting! Our innovative machine combines the power of plasma and oxy-fuel technologies, enabling you to cut materials with impressive thicknesses of up to 50 mm. Precision cutting has never been so easy. Thanks to our integrated cutting database for mild steel, aluminum, and stainless steel, you always have total control with optimal settings for every material. With 50 macros for creating cutting programs directly on the CNC controller, your possibilities are virtually limitless. The kaitec 1530 plasma cutter not only ensures efficient workflows but also cost optimization. Our intelligent remnant sheet management and cutting cost module help you reduce material waste and lower your production costs. Experience the future of cutting with kaitec 1530 and increase your productivity, efficiency, and profitability. Welcome to a new era in cutting! Cutting Area: 1,000 x 2,000 mm 1,500 x 3,000 mm Material Thickness (Plasma): 1–25 mm Material Thickness (Oxy-fuel): 10–60 mm Price: Machine price depending on configuration, tailored to your requirements: from €8,900 (machine only, without table, etc.) from €15,900 (complete set) plus plasma source, transport & installation Ffedpfx Aox Ngl Segmjt We look forward to your inquiry!

Condition: good (used), Year of construction: 2019, Type: Gammatec 2040 Machine number: KE2019010 Cutting size: 4,000 x 2,000 mm Max. sheet thickness: 30 mm Number of torches: 1 Control: Kjellberg Finsterwalde HiFocus 280i / PGV 3-440 / KWE 360 Connection: 2 kVA Fsdpfx Agex Ndpnemjft Cooling type: Equipment: Dimensions: 5,000 x 2,400 x 1,000 mm Weight: approx. 4 t

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, sheet thickness (max.): 38 mm, overall weight: 3,500 kg, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, TECHNICAL DETAILS Fsdpfxex I Ehpe Agmoft Cutting range for steel: 1–38 mm X-axis travel: 3,000 mm Y-axis travel: 1,500 mm MACHINE DETAILS Cutting medium: HiFocus 161i Control system: MicroStep Total power requirement: 6 kA Machine weight: approx. 3,500 kg EQUIPMENT Kjellberg plasma power source HiFocus Plus 161i

Condition: ready for operation (used), Year of construction: 2020, This 3-axis plasma cutting machine manufactured in 2020 features a Hypertherm Powermax 65 plasma power source with a rated current of 65 A. It can handle steel cutting up to 32 mm and operates with a duty cycle of 50% at 65 A. The working table measures 3000 × 2000 mm. Ideal for high-quality cutting capabilities, consider the opportunity to buy this plasma cutting machine. Contact us for more information. Fodox Imukjpfx Agmjft Application Types Cutting

Condition: ready for operation (used), Type: 1304 -The ZINSER cutting machine 1306 has been particularly developed for efficient machining of pipes for cylindrical pipes. Apertures, notches and the entire end preparation can be realized quickly and economically. A variety of standard figures is available from the ZINSER MCC software. Fjdpfx Agox Imn Demsft - Pipe cutting machine with track (X) and rotation axis (A) - Three-jaw chuck or four-jaw chuck - A hollow shaft through the chuck enables the use of an internal ventilation - CNC-controller - Thermal dynamics plasma power source with dialogue system - Torrit filter system - max cutting cap: 25 mm - X-movement: 5100 mm - Z-movement: 150 + 270 mm Plasmasource: Thermal Dynamics A60

Condition: ready for operation (used), Year of construction: 2018, This KERF RUM 2500P plasma cutting machine was manufactured in 2018. It features a large cutting area of 15000mm x 2000mm and is equipped with two bridges, each with 275amp plasma. Full history from the manufacturer is available. Contact us for more information about this machine. Application Types Cutting Fedpfsx Hbkqjx Agmsft

Condition: ready for operation (used), Year of construction: 2020, This GEPELEKTRO Phantom CNC was manufactured in 2020. It features a large working area with table dimensions of 12,000 × 3,000 mm and is equipped with a Lincoln Electric Burny Phantom II controller. It can handle flame cutting up to 300 mm steel and plasma cutting up to 50 mm steel. The machine includes a complete extraction system and Messer OmniWin 2019 software. Contact us for more information about this machine. Fjdex E Edfspfx Agmeft Application Types Cutting

Condition: like new (used), Year of construction: 2022, operating hours: 65 h, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness copper (max.): 30 mm, sheet thickness brass (max.): 30 mm, total width: 1,500 mm, total length: 3,000 mm, table length: 3,000 mm, working width: 1,500 mm, table width: 1,500 mm, Equipment: documentation/manual, Slightly used Swift Cut Pro 3000 with Hypertherm 125A power source. Fodpfx Agjx E At Rjmsft

Condition: used, Year of construction: 2009, functionality: fully functional, type of input current: AC, working range: 8,000 mm, sheet thickness (max.): 150 mm, sheet thickness steel (max.): 150 mm, sheet thickness aluminum (max.): 30 mm, input voltage: 400 V, total width: 4,500 mm, total height: 3,605 mm, total length: 12,000 mm, track width: 4,000 mm, table height: 700 mm, table length: 9,000 mm, working width: 2,500 mm, table width: 3,000 mm, cutting current: 600 A, working length: 8,000 mm, space requirement length: 12,000 mm, type of cooling: water, height adjustment type: electric, ambient temperature (max.): 45 °C, Plasma-oxyfuel combination machine with water table Ffsdex Ew Ebopfx Agmst 600A cutting capacity Water table suitable for sheets up to 2500x8000mm First commissioned in 2009 Maximum cutting capacity: 150mm steel plate Original price: €224,000 Self-dismantling required

Condition: ready for operation (used), Year of construction: 2019, Main Drive Ffsdpox Enlfefx Agmjt Number of axis 3 This 3-axis ACCURL CPL 2040 plasma cutting machine was manufactured in 2019. It features a cutting width of 2000 mm and a length of 4000 mm. It utilizes a Hypertherm Powermax 125 source, capable of cutting mild steel up to 36 mm, stainless steel up to 20 mm, and aluminum up to 18 mm. Consider the opportunity to buy this ACCURL CPL 2040 plasma cutting machine. Contact us for more information. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,800 h, Table Table load 7500 kg This VOORTMAN V320 was manufactured in 2019. It features a Kjellberg Smart Focus 300 plasma source and a Donaldson DFPR06 extraction system. Capable of handling mild steel with a panel length range of 850 – 6,100 mm and thickness from 6 – 75 mm. It includes options for punch marking and countersinking, enhancing versatility. Consider the opportunity to buy this VOORTMAN V320 plasma cutting machine. Contact us for more information about this machine. Application Types Ffjdpfex D N Aasx Agmot Cutting

Condition: ready for operation (used), Year of construction: 2021, This ESAB Suprarex HD 4000 plasma cutting machine was manufactured in 2021. It features a track width of 4000 mm and a track length of 12000 mm, supporting a maximum working length of 9000 mm. The machine is equipped for both oxyfuel and plasma cutting, handling material thicknesses up to 200 mm. If you are looking to get high-quality cutting capabilities, consider the ESAB Suprarex HD 4000 machine we have for sale. Contact us for more information. Application Types Cutting Fjdox D D N Ujpfx Agmjft

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 4100 mm Measurements depth 10169 mm Machine weight 5500 kg Ffedpfxox D Ey Is Agmet Control Unit Brand MicroStep Model IMSNC Main Drive Number of axis 3 This 3-axis MicroStep PLS 7501.25PG plasma cutting machine was manufactured in 2008. It features a robust MicroStep MSNC500 control system and dual cutting capabilities with a HPR 260 AGC plasma and an acetylene gas burner. The machine offers a maximum cutting thickness of 50 mm and operates efficiently within a large working field. If you are looking to get high-quality cutting capabilities, consider the MicroStep PLS 7501.25PG machine we have for sale. Contact us for more information. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2008, overall weight: 196 kg, total height: 1,050 mm, table length: 4,500 mm, table width: 2,000 mm, General Data Measurements width 540 Measurements depth 960 mm Measurements height 1050 mm Machine weight 196 kg Table Outer length 4500 mm Outer width 2000 mm Fsdpfx Aox D Hqujgmoft This plasma cutting machine was manufactured in 2008. It features a CNC control MSNC500P Windows and a plasma source with a cutting range of 0.5 to 25/30mm, adjustable from 10 to 160 A for cutting. The flame cutting table measures 4500x2000mm, suitable for both plasma and oxyfuel cutting. It operates efficiently within a temperature range of +5 to +45 °C. Consider the opportunity to buy this MicroStep SPL-P 4501.25 plasma cutting machine. Contact us for more information about this machine. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2011, This MicroStep EasyCut 6001.25PrGB was manufactured in 2011. It is a CNC plasma/oxyfuel cutting machine designed for industrial, heavy-duty applications. Features include a large working area of 6000 × 2500 mm, dual-side driven gantry, and compatibility with CAM software like mCAM and AsperWin. It supports up to 6 oxyfuel torches and offers options like automatic height control. Note: the gas console is defective. Contact us for more information about this machine. Application Types Cutting Ffedjx D Hz Hspfx Agmst

Condition: ready for operation (used), Year of construction: 2017, General Data Machine weight 9000 kg Ffodpfsx D It Rox Agmot Measurements height 2300 mm Measurements depth 4300 mm Movement X-Axis Movement 3000 mm Y-Axis Movement 1200 mm Main Drive Number of axis 3 Dimensions Machine Length 15000 mm This 3-axis Hypertherm PL-YPE 3100 was manufactured in 2017 and features a Hypertherm® HyPerformance HPR 400XD gas plasma source. It offers precise cutting with a maximum capacity of 50 mm in mild steel, 75 mm in stainless steel, and 45 mm in aluminum. The effective cutting area is 3000 mm by 1200 mm. If you are looking to get high-quality cutting capabilities, consider the Hypertherm PL-YPE 3100 machine we have for sale. Contact us for more information. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 700 mm Measurements depth 1054 mm Measurements height 978 mm Machine weight 197 kg This Thermal Dynamics UltraCut 200 was manufactured in 2012. It features a robust output current range of 10-200 A and a duty cycle of 100% at 200 A, ensuring continuous operation. The cutting capacity on mild steel reaches up to 40 mm with a maximum edge start of 65 mm. It includes a liquid-cooled XT-300 precision torch and a DFC-3000 digital gas console with touchscreen. For more information about this machine, please reach out to us. Ffjdpfx Agox D Ixasmst Application Types Cutting