Soccus

Year of construction: 2019, condition: ready for operation (used), overall weight: 5,000 kg, This HOFMANN CVK11-BH4 was manufactured in 2019. It is an balancing machine designed for precise and reliable operations. Ideal for applications requiring precise balancing of rotating components. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Air connection: 5. 5 bar • Rated current: 36. 5 a • Power: 27 kva • Power: 27 kva Extra Information Machine still under power Nkjdpoynhvbsfx Afceu

Year of construction: 2020, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: 840D, overall weight: 15,000 kg, This PROFILATOR DV370-HL-05 was manufactured in 2020. A robust and reliable unit, it is ideal for those looking to enhance their machining operations. Consider the opportunity to buy this PROFILATOR DV370-HL-05. Contact us for more information. Additional equipment • Toothed Spindle 1: Tool clamping interface: HSK-C63/ Tool speed max: 4500 1/min /Screw tightening torque, expansion chuck: 20 Nm • Toothed Spindle 2: Tool clamping interface: UTS 50 /Tool speed max: 7000 1/min/ Screw tightening torque UTS clamp: 40 Nm Machine Benefits Nodpfxsynhu Dj Afcoku Technical Machine Benefits • Nc workpiece spindle 1: traverse path x1: 1760mm, z1: 385mm/ travel resolution on the cnc: 0. 001mm/ input speed of the axes max: 60 m/min • Nc workpiece spindle 2: traverse path x2: 2011mm, z2: 390mm /travel resolution on the cnc: 0. 001mm/input speed of axes max: 60 m/min • Nc workpiece counterholder: traverse path x3: 104mm, z3: 107mm /travel resolution on the cnc: 0. 001mm /input speed of the axes max: 60 m/min • Gear tower 1: traverse path y11: 195mm /travel resolution at the cnc: 0. 001mm /swivelling angle b1 max: 10° • Loading gantry: travel u5 axis: 1907mm /traverse path v5 axis: 271mm • Input speed (all applicable axes): max 60 m/min • Rotation diameter max: 210mm/machining diameter max: 200mm/workpiece length max: 300mm/interface, workpiece clamping: kk6/workpiece speed max: 1100 1/min • Factory back spindle 1/2: speed max: 1000 1/min/gear spindle 1 and 2, shift slide y11, nc workpiece counterholder, slide x1/x2, slide z1/z2, a11 axle (charging unit), u5 & v5 axes (loading gantry):/speed max: 3000 1/min, 9000 1/min for gear spindle 2 • Loading gantry: 500kg/magnetic chip conveyor: 100kg/water recooler: 150kg

Year of construction: 2019, condition: not inspected (used), functionality: unexamined, overall weight: 400 kg, total length: 1,000 mm, total width: 700 mm, total height: 1,000 mm, machine/vehicle number: 144669, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to timely collection, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! MACHINE DETAILS Nsdpfx Asym T Dusfceku Operating voltage: 100 - 240 V Connection: 800 W Frequency: 50/60 Hz Dimensions & weight Dimensions (L x W x H): 1,000 x 700 x 1,000 mm Weight: 400 kg External reference: CES - Lot 14

Condition: used, Year of construction: 2000, Lot consists of: (1) CNC Deep Rolling Machine Nsdpfx Asym Sp Nofcsku Technical details: max length 920 mm, max counterweight radius (depending on stroke and bearing width) 195 - 270 mm, max 8 main + 6 pin bearings, min/max main bearing diameter 33 - 88 mm, min/max pin bearing diameter 30 - 84 mm, max bearing width 18.5 mm, max stroke 140 mm, CNC SIEMENS SINUMERIK 840D, 400V 50Hz 35kVA, weight 13 t.

Condition: excellent (used), Year of construction: 2019, ■ V310 plate processing machine (including 2 gantry beams of 5.500mm and side trucks) ■ This V310 plate processing machine is capable of processing plates up to 3.000mm x 34.000mm ■ X-rail (37.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ■ Plasma cutting and extraction table with drilling supports (3.800mm x 35.360mm, 1 pcs, suitable for ≥ 350A cutting) ■ Donaldson fume extraction unit DFPRO12 - 200L (2 pcs) ■ Gantry beam 1 ■ Position 1: VD40 drilling unit (servo driven, executed with automatic tool changer, up to 10 different tools) ■ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ■ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x-, y-, k- and v-weld preparations) ■ Driven suspension (1 pcs, servo motor driven, including laser pointer) ■ Dross inhibitor (1 pcs, including 1,2L reservoir) ■ Arc Glare protection (1 pcs) ■ Position 3: Oxy-fuel cutting torch (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ■ Voortman height control (1 pcs, capacitive height control) ■ Clamped suspension (1 pcs, clamped to position 2, with manual clamp) ■ Safety devices (light curtain, safety bumpers) Gantry beam 2 ■ Position 1: VD40 drilling unit (servo driven, executed with automatic tool changer, up to 10 different tools) ■ Driven suspension (1 pcs, servo motor driven) Nksdpfx Afjym Nf Ijcsu ■ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ■ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x-, y-, k- and v-weld preparations) ■ Driven suspension (1 pcs, servo motor driven, including laser pointer) ■ Dross inhibitor (1 pcs, including 1,2L reservoir) ■ Arc Glare protection (1 pcs) ■ Position 3: Oxy-fuel cutting torch (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ■ Voortman height control (1 pcs, capacitive height control) ■ Clamped suspension (1 pcs, clamped to position 2, with manual clamp) ■ Safety devices (light curtain, safety bumpers)

Condition: used, TUBE MILL OTO MILLS 219.10 The OTO MILLS 219.10 is a heavy-duty tube mill, characterized by its rigid mechanical construction and its integration of high-tier industrial components, making it a stable continuous, high-quality industrial production line. Technical specifications · Manufacturer: OTO MILLS · Tube diameter: 88.9 - 219 mm · Square: 90x90 - 200x200 mm. · Rectangular: 20x60 - 250x150 mm. · Thickness: 2.5 - 10 mm. · Speed: Max. 80 m/min · Coil weight: Max. 16 Ton Nksdpfjym Dbdex Afcou · Tube length: 6 - 12 m Scope of supply · Entry line · OTO 219.10 forming and sizing system · Cutoff and runout system · Electrical and electronic parts · Hydraulic system · Tooling · Thermatool HF welder cfi 600 kw · Double seam annealer (500 kw x 2) – Thermatool · Online Eddy current – Foerster · Semi-automatic packaging machine · Tube inside scarfing system – Alpha Metall Tube diameter: 88.9 - 219 mm Square: 90x90 - 200x200 mm. Rectangular: 20x60 - 250x150 mm. Thickness: 2.5 - 10 mm. Coil weight: Max. 16 Ton Tube length: 6 - 12 m Speed: Max. 80 m/min

Condition: used, Year of construction: 2020, 2020 KIMLA LF1530 3kW CNC Fiber Laser Cutting Machine Working travel: 1600 x 3100 x 120 mm, Sheet dimensions: 3000 x 1500 mm, Sheet weight: 900 kg, Machine S/No: 3364 (2020), Laser power: 3kW Fiber, Laser source: IPG YLS 3000-U, Source S/No: 20095351, Donaldson DFPRO4- SPRK Fume, Year: 2018, HC100M1-23A Water Chiller, (2020) Champion FM07 Compressor Nodpfxsym Amrs Afcoku

Year of construction: 2013, condition: excellent (used), functionality: fully functional, machine/vehicle number: M284 2013.5.2, For sale is a Steinhauer eCAB WorkCenter CNC machining center, year of manufacture 2014, in very well-maintained and fully functional condition. The last service was performed on 13.08.2024. The machine is immediately ready for operation. The eCAB WorkCenter was specifically developed for professional switch cabinet construction and is ideally suited for automated processing of mounting plates, doors, side panels, and other enclosure components. It enables precise drilling, milling, and thread cutting of components made from steel, stainless steel, aluminum, and plastic. CAD-assisted processing is carried out via a CNC controller with high repeat accuracy – ideal for both single-part and series production. Technical Highlights: - CNC machining center specifically for switch cabinet manufacturing - Automated machining of mounting plates, doors, and enclosure components - Suitable for steel, stainless steel, aluminum, and plastic - High precision and repeat accuracy - User-friendly CNC control / software Machine Data: Manufacturer: Steinhauer Model: eCAB WorkCenter Year of manufacture: 2014 Last service: 13.08.2024 Condition & Service: - Very well maintained, fully functional - No known technical defects - Inspection and test run possible by appointment Scope of Delivery: Nsdpfoymw Hasx Afceku - eCAB WorkCenter including control system - Accessories / tool holder - Documentation / computer including software

Year of construction: 2010, condition: excellent (used), functionality: fully functional, WE SELL AN VERY NICE WORKING CONDITION WAFIOS FSE23 WAFIOS FSE 23 CNC - OFFERING Designed for the production of compression springs, the Wafios FSE 23 is offering a cost-optimized solution for manufacturing all standard types of compression springs. The reliability of the machines ensures smooth and trouble-free production, not only because any standstill time is reduced to a minimum, but also thanks to the high repeatability delivering perfect production results time after time. With easy setup and straightforward handling, tooling change and setup time is minimized and machine availability is increased to its full potential. Technical Specifications: Wire Diameter: 0,35mm –> 1,60 mm Nedjymthyepfx Afcsku Outer Spring Diameter: up to 35,00 mm Infred Speed: up to 120 mt/min Output Rate (springs): up to 500 pcs/min Output Rate (rings): up to 750 pcs/min

Year of construction: 2019, condition: used, functionality: fully functional, Profile and tube bending machine. Sets of rolls for pipes 1/2", 3/4" and 1". Nksdpfxoymmd Ij Afcsu

Condition: used, TWO ROLLS BAR STRAIGHTENER PBVR6 Manufacturer: BRONX Capacity - Bars with tensile strength of 600 N/mm²: Ø 15 - 110 mm - Bars with tensile strength of 700 N/mm²: Ø 15 - 100 mm - Bars with tensile strength of 1.000 N/mm²: Ø 15 - 85 mm Roll angle adjustement: 10 to 20 degrees Working direction: Right to Left Scope of supply Nedpfxjymcn Ae Afcjku - Entry chanel - Duo introduction - Straightener - Exit chanel Bars with tensile strength of 600 N/mm²: Ø 15 - 110 mm Bars with tensile strength of 700 N/mm²: Ø 15 - 100 mm Bars with tensile strength of 1.000 N/mm²: Ø 15 - 85 mm Roll angle adjustement: 10 to 20 degrees Working direction: Right to Left

Condition: used, Straightener & polishing machine WRPT2, manufactured by KIESERLING Njdeymcm Eopfx Afcjku Bars diameter : 10 - 35 mm Bars length : 3 - 6 m Scope of delivery includes : 1. Infeed pinch-roll with - Motorised bottom roller - Vulkollan upper roller 2. WRPT2 straightening machines, made KIESERLING with - 2-roller straightener with upper roller height adjustment and upper/lower angle adjustment - Two geared motors with cardan shaft drive - Infeed guide - Side guide support - 1 set of side guides 3. Outfeed pinch-roll with - Motorised bottom roller - Vulkollan upper roller 4 Electric control panel with manual movement buttons Bars diameter: 10 - 35 mm Bars length: 3 - 6 m

Condition: used, Bar straightener WRPF 35-50, made by KIESERLING Bar diameter : 8 - 50 mm Speed : Up to 50 m/min Scope of supply includes : - Bar Loading channel - Input pinch-roll - Straightening machine WRPF35 - Exit pinch-roll - Bar Output channel Nksdeymcmrspfx Afceu - Electric equipment. (Option: NEW with HMI control desk) - Existing spare parts - Documentation - Optional: Loading table - Optional: Unloading cradle Bar diameter: 8 - 50 mm Speed: Up to 50 m/min

Condition: used, BAR PEELING MACHINE manufactured by LANDGRAF Model T100 Working range : Diameter: 20 – 100 mm (finished diameter) Tolerance: h9 Bar Length: 1.900 – 6.500 mm Peeling head: 320 – 2.400 rpm Speed: up to 40 m/min Complete line with : Loading table with chain transfer Entry Roller Way, adjustable Exit Roller Way, adjustable Nkedpfx Ajymb U Usfceu Electric equipment Hydraulic power pack Bar diameter: 20 – 100 mm (finished diameter) Tolerance: h9 Bar Length: 1.900 – 6.500 mm Peeling head: 320 – 2.400 rpm Speed: up to 40 m/min

Year of construction: 2025, condition: refurbished (used), Complete peeling line WDHF35/50/75 AS NEW, revamped & tested in our workshop. Function and h9 tolerance guaranteed. Working range Entry diameter: 7 - 38 mm Finishing diameter: 6 - 35 mm Bar length min.: 2,9 m (3,2 m at max. feeding speed) Bar length max.: 6,5 m Feeding speed: 4 - 50 m/min progressively adjustable Cutting head RPM: 675 / 1330 / 4500 rpm progressively adjustable Scope of supply KIESERLING WDHF 35/50/75 as described above, composed by: - Entry roll conveyor - Feeding rolls - Peeling machine - Exit carriage Nkodpfx Aeymb Uujfcju - New output pinch-roll - Exit channel - Revamping in our workshop - New hydraulic system - New lubrication system - New pneumatic - New electrical equipments - New complete set of tooling & consumables SAAR-HARTMETALL - Optionnal: Laser diameter control system for tool correction Entry diameter: 7 - 38 mm Finishing diameter: 6 - 35 mm Minimum bar length: 2,9 m (3,2 m at max. feeding speed) Maximum bar length: 6,5 m Feeding speed: 4 - 50 m/min progressively adjustable Cutting head RPM: 675 / 1330 / 4500 rpm progressively adjustable

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, ATM Model: ATM Brillant 255 ATM Brillant 255 Cut-off Machine 400V Metallography Laboratory 2019 Description: For sale is a professional cut-off machine ATM Brillant 255 – Year of manufacture 04/2019 Industrial unit designed for precise material sectioning in metallography, laboratory, and materials testing applications. The machine comes with a base cabinet and integrated coolant system. Several suitable cut-off wheels are included (see photos). Very robust professional quality Technical Data (as per nameplate): Model: Brillant 255 Year of manufacture: 04/2019 Manufacturer: ATM GmbH Nodpoymbzusfx Afcsku Electrical Data: Voltage: 400 V (three-phase) Frequency: 50 Hz Power: 12.5 kVA Fuse protection: 32 A Mechanical Data: Cut-off wheel: Ø 400 mm Max. wheel speed: approx. 3050 rpm Wheel bore: 32 mm The machine is mounted on a base cabinet with coolant tank Dimensions: Width: approx. 120 cm Depth: approx. 80 cm Height: approx. 150 cm Weight: approx. 450 kg Condition: Used Scope of delivery: (See photo) (Specifications and technical data subject to change and errors!) For further questions, please feel free to contact us by phone.

Year of construction: 2024, condition: refurbished (used), Tube Straightener 6V1+1 90×5, made by CARTACCI Recently revamped Tube diameter size : 12 – 90 mm Nkedpfxoyma Hvj Afcsu Wall thickness : 0,8 – 5 mm Tube length : 4 – 12 m Straightening force : 16 Mp Straightening precision : 0,5 mm/m Speed infinitely variable : 0 – 100 m/min Diameter: 12 – 90 mm Thickness: 0,8 – 5 mm Length: 4 – 12 m Straightening force: 16 Mp Straightening precision: 0,5 mm/m Speed: 100 m/min

Condition: used, Automatic packing machine Manufacturer: MAIR Model: .90.D.6.SL Automatic strapping machine with automatic wood support insertion Manufacturer: ITIPACK Model: SKE_M_TS-31J-WILT_4MR Working range Diameter round: 16 - 90 mm Thickness range: 0.8 - 5.0 mm Length: 4 - 12 m INCLUDING - Rollway (aprox.24m) with 2 sections Nkodpsyma Adofx Afcju - MAIR .90/D/6/SL, for hexagonal & rectangular bundles - Bundle lateral conveyor to strapping - AUTOMATIC Strapping machine ITIPACK with wood insertion - Longitudinal chain conveyor of strapped bundles - Bundle weighting and emulsion draining station - Bundles transversal chain for storage section - Electrical control and operator control panel Thickness: 0.8 - 5.0 mm Tube diameter: 16 - 90 mm Length: 4 – 12 m Square bundle: 200 x 200 mm - 650 x 520 mm Hexagonal bundle: 230 x 200 mm - 600 x 520 mm Bundle weight: 2 Tn

Year of construction: 2025, condition: refurbished (used), OFF-LINE Packing line .90.4.F Made by MAIR Revamped 2025 Scope of supply: 1 New chain transport system, with 4 lifting chains, to collect the tubes from the roller conveyor. 2 Automatic tube by tube feeding unit 3 Single Row preparation section 4 Automatic bundle formation unit, with interchangeable: - 4 Bundle holding support for square bundle - 4 Bundle holding supports for hexagonal bundle 5 Strapping bridge with manual strapping unit Signode 6 Movable carriage for frontal extraction of finished bundle 7 Finished bundle storage unit 8 New Electrical control panel with operator control desk 9 New emulsion draining & bundle weighting system Tube diameter (Round): 16 - 90 mm Tube diameter (Square): 16×16 – 80×80 mm Tube diameter (Rectangular): 20×16 – 80×40 mm Squares bundles: 250×250 – 500×500 mm Hexagonal bundles (size of side): 150mm – 350mm Nkodpfx Afjymav Rscsu Bundle weight: Max. 2Tn

Condition: used, Stainless steel welding line MOD.50/60, made OLIMPIA 80 with TIG welder & Seam bead roller & Orbital polishing Specifications: - Diameter : 18 – 63.5 mm Njdpfx Aeymautofceku - Thickness : 0.5 – 3 mm - Length : 3 – 6 m - Speed : Up to 3 m/min Diameter: 18 – 63.5 mm Length: 3 – 6 m Speed: Up to 3 m/min

Condition: used, Complete entry line, made by OTO MILLS - Double Decoiler with bottom/top hold-down roll - Strip peeler & Pinch-roll - Automatic strip joiner - Extra-sized horizontal accumulator Scope of supply includes: Double Uncoiler AD508SD - Double hydraulic expansible mandrel - Hydraulic Mandrel rotation - Hydraulic Uncoiler rotation/lock - Hydraulic Uncoiler traverse for alignment - Brake pneumatically-operated disc OTO Mills Pinch-Roll and flattener PRS566 - 3+2 rolls - Hydraulic roll positioning OTO Mills 100% automatic butt-welding unit GG566 - Complete automatic joining and welding process Nodjymatiepfx Afcsku - Strip exit table with encoder - Motorized strip exit Pinch-roll OTO Mills Horizontal Accumulator - Heavy Duty horizontal accumulator - Motorized Feeding Pinch-roll – 106 KW - Rotating table with Main motor 106Kw - Approx. 6,5 meter external table - Exit strip guiding Turret OTO Mills Tube diameter: 76,1 - 168,3 mm Material thickness: 2 - 6.3 mm Double Uncoiler: AD508SD Pinch-Roll and flattener: PRS566 100% automatic butt-welding unit: GG566 Accumulator: Heavy Duty horizontal accumulator

Condition: used, OTO MILLS ACCUMULATOR HA506RT Strip size up to 500mm x Max. 6.0mm Working range · Strip width: Max. 500mm · Thickness: 1.5 – 6.3mm · Material: HR, Galvanized, Pickled Horizontal Accumulator · Heavy Duty horizontal accumulator · Motorized Feeding pinch-roll · Pinch-roll motor and transmission DC 106 KW · External ring rotating table · Main motor rotating table DC 106Kw · Approx. 6 meter external table with vertical rolls · Inner ring Strip passage · Strip Passage tower · Top and bottom strip guiding rolls Control panel · 1 panel for control of the accumulator Strip width: Max. 500mm Nsdsymarxspfx Afcjku Thickness: 1.5 – 6.3mm Material: HR, Galvanized, Pickled

Condition: refurbished (used), 100% REVISED IN 2024 PROCESSING CENTRE FOR DEBURRING & CLEANING OF SHORT TUBE RSA RASAPLAN NV & RASACLEAN SK Nsdpfoymarfox Afcoku Scope of supply: 1. RSA automatic loading system for short pieces 2. Deburring system RASAPLAN N00; 3. RSA cleaning system RASACLEAN SK for short pieces Complete line RSA for short size/diameter tube with loading , deburring, washing. Thickness: 3 mm Pieces length / fixed lengths: 40 – 120 mm Length tolerance: 0,5 mm Deburring system: RASAPLAN NK V 500

Condition: used, ZINC-COATING PLANT FOR PIPES , made by VOEST ALPINE / LOECO Maximum capacity: 60.000 t/year (16 t/h) Producible dimensions: ¼” to 4” Producible lengths: 4 to 7 m Zn layer: 400 g/m2 according to DIN 2444 Maximum capacity: 60.000 t/year (16 t/h) Producible dimensions: ¼” to 4” Producible lengths: 4 to 7 m Nkjdjyman Hspfx Afcsu Zn layer: 400 g/m2 according to DIN 2444

Condition: excellent (used), Year of manufacture: 2022 Machine type: Sheet metal profiling and punching line Operating mode: Continuous (flying system) Maximum decoiler capacity: 15,000 kg Material feed: from sheet metal coils Straightening unit: Multi-roll straightener Number of punching portals: 5 double punching portals Number of tools: up to 20 small / 10 large tools Round holes: Ø 8 – Ø 22 mm Slotted holes: up to 18 × 80 mm Keyhole slots: Yes Pre-cutter: flying Post-cutter: rotary with hook knives Profiler: 4 forming stations Profile width range: 100 – 400 mm Strip centering: automatic Nodpfxoymampe Afcoku Guide modules: SIGMA Maximum profile length: 15 m Outfeed table: roller table, automatic transport Cutting mode: without material stop