Arima

Condition: used, Year of construction: 2003, Control system: FANUC Number of axes: 7 Complete with IEMCA SMART 316 bar feeder Cgedozbry Rspfx Af Heu Main spindle: Max. bar diameter: mm 12 (15) Max. speed: 12,000 rpm Drive power (S2: 30 min / S1): kW 3.7 / 2.2 Counter spindle: Max. turning diameter: mm 12 (15) Maximum speed rpm: 12,000 Drive power (S2: 30 min / S1): kW 3.7 / 2.2 Axes: Maximum rapid traverse rate of the axes m/min 40 Maximum axis acceleration m/s2 10 Travel X1 (linear) / Y1 / Z1 mm 30 / 195 / 120 Travel X2 / Y2 / Z2 mm 180 / - / 180 Tool slide 1: Tool slide system: linear Number of fixed / driven tools: 5 / 4 Arbor cross-section for fixed tools: mm 10 x 10 Drive power for driven tools (S3 40% / S1): kW 1.1 / 0.55 Tool slide 2: Tool slide system: linear Arbor cross-section for fixed tools: mm ø 16 Drive power for driven tools (S3 40% / S1): kW 1.1 / 0.55 4 driven tools Chip conveyor Machine completely overhauled by the manufacturer in 2012

Condition: good (used), Year of construction: 2005, functionality: fully functional, Maier ML 26 long-turn lathe, Csdpezavctefx Af Hsgu Fanuc control system, Year of manufacture 2005, Bar passage diameter 26 mm, Fire extinguishing system, High-pressure pump, Counter spindle, FMB magazine loader, 6 powered tool holders, Accessories.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Maier ML 16 long turning lathe, year of manufacture 2004, Fanuc control system Bar passage diameter Ø 16mm High-pressure pump, Fire extinguishing system, Counter spindle, FMB magazine loader, some driven tool holders, accessories. Codpszavb Ajfx Af Hsgu

Condition: good (used), Year of construction: 2003, CNC turning center TRAUB TNK 36 Year of manufacture: 2003 Control: TX8i (64 bit) Flat screen monitor, 10.4 inches Additional V24 RS232 interface in the control cabinet MDE interface in the control cabinet (machine is running, piece counter) Tool monitoring for thread cutting without compensation chuck Main spindle: Spindle bore 36 mm, maximum speed 6,300 rpm Drive power AC 6.7 / 10.7 kW C-axis Quick-change parts Hainbuch, mounting aid, base body Quick-change device Hainbuch, manual Counter spindle: Counter spindle as a motor spindle with C-axis Device for counter pressure, workpiece ejection device, Axfix chuck Hainbuch Tool holder, top, driven tools, electronic gearbox X3 cross axis for front tool holder, front tool holder, 5-position, driven tools Cut-off station, driven tools Workpiece removal device: Workpiece gripper Gripper jaws D5-8, D8-20, D20-36 Coolant system: Tank 230 l / 7 bar / 50 l/min. Internal coolant supply 30 bar High pressure 120 bar at the front and rear machining stations, vacuum rotary filter Knoll VRF 150/750 (suitable for aluminum, plastic, brass, and steel) Codpfxjzaud Ae Af Hegu Coolant gun Hinged belt chip conveyor, discharge height 950 mm Preparation for installation of bar feeder magazine (guide tube D25, D36) Workpiece stop, rotating (shank 16x16) Collision monitoring Brankamp CMS 100 on main and counter spindle Machine without known defects.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Siemens control system, Turret, Y-axis, Csdpfxezakq Se Af Hegu Counter spindle, High-pressure system, FMB loading magazine.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Siemens control system, Cedpfxszairhj Af Hjgu Turret, Counter spindle, Loading magazine.

Condition: excellent (used), Year of construction: 2018, 2018 Citizen Miyano BNA-42DHY3 with Fanuc Series Oi-TF Control & Iemca KID 80/16 Bar Feeder Twin spindle, Twin Turret. Axes 'X, Y, Z' (Main) + Sub Spindle Axes. Machining Capability: Simultaneous Front/Back (Superimposed Machining). Maximum Blank Length 100mm. Main Spindle Maximum Bar Ø42mm, Sub Spindle Ø34mm. Axis Travel 'X1'=140mm, 'Z1'=235mm, 'Y'=70mm(±35 mm), 'X2'=140mm, 'Z2'=360mm. Number Of Spindles 2 (Main + Sub). Maximum Main Spindle Speed 6,000rpm (7.5/5.5kW Motor), Sub Spindle 5,000rpm (5.5/3.7kW Motor), Maximum Driven Tool Speed 5,000rpm (1kW Motor). 'C' Axis Standard On Both Spindles (0.001° Resolution). Main Turret 8 Stations, Sub Turret 6 Stations. Turning Tool Shank 20 x 20mm. Internal Tool Holder Ø25mm. Turret Index Time Approx. 0.2 sec. Running Hours 3,696. /No. DW 1241 (2018/09) Cedpfx Afsy U H Ttj Hogu With Iemca KID 80/16 Type 16 Bar Feeder. S/No.021927QA01 (2019), Cromar Chip Conveyor, Coolant System, Parts Catcher, Parts Conveyor, Quantity Of Driven/Turning Toolholders, Collets, Signal Tower And Manuals. Overall Dimensions L2,240 x W1,450 x H1,680mm. Weight 3,100kg.

Condition: ready for operation (used), Year of construction: 2016, spindle motor power: 11,000 W, spindle speed (max.): 8,000 rpm, overall weight: 3,900 kg, total width: 1,390 mm, total height: 1,745 mm, bar diameter (max.): 38 mm, product length (max.): 3,020 mm, number of axes: 8, This 8-axis UTIMAC ISOLA XD 38 II Siemens was manufactured in 2016. It features a maximum bar capacity of Ø38 mm and a spindle speed of 8,000 rpm. The machine includes a counter spindle with a speed of 7,000 rpm and a rapid traverse of 32 m/min. If you are looking to get high-quality turning capabilities, consider the UTIMAC ISOLA XD 38 II Siemens swiss type turning machine we have for sale. Contact us for further details. • Main spindle: • Max. bar capacity: 38 mm (42 mm optional) • Stroke (versions): H = 320 mm; N = 90 mm; NH = 90 / 160 mm • Rapid traverse: 32 m/min • Counter spindle: • Max. bar capacity: 38 mm • Stroke: 280 mm • Speed: 7,000 rpm • Motor power: 11 kW • Vertical tool plate axes X1–Y1: • Turning tools: 5 (16x16) • Standard rotating tools: 5 • Rotating tools for B-axis: 4 • Fixed spindle stations: 5 • Motorized tool power: 2.6 kW Cgedsy U H Nnjpfx Af Hou • Motorized tool speed: 6,000 rpm • Rapid traverse: 32 m/min • B-axis: • Angular adjustment: 145° (+90° / -55°) • Number of tools: 6 (3 ER16 + 3 ER11) • Motorized tool speed: 6,000 rpm • Motor power: 1.9 kW • HY2 version: • Tool stations: 8 (4 fixed + 4 motorized) • Coolant tank capacity: 230 L Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2003, machine/vehicle number: IntNr230445, branded CNC sliding head lathe Citizen L520-VII, year 2003 control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Bar Ø max. 20 mm, turning length max. 205 mm, Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), parts conveyor belt, fire extinguishing system chip conveyor, IEMCA BOSS 432r loading magazine The machine can be inspected under power by appointment. Subject to changes and errors in the technical data and information as well as prior sale! Cgsdpjy U Hlcefx Af Hju used CNC-lathe Citizen L520-VII, year 2003 control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, bar-Ø max. 20 mm, turning length max. 205 mm, main spindle, speed max. 10.000 rpm, C-axis 0,001 deg, counter spindle, speed max. 10.000 rpm, C-axis 0,001 degree, Tool holder f. total 18 tools (linear tool holder, front attachment, backworking), parts conveyor belt, fire extinguishing system chip conveyor, loading magazine IEMCA BOSS 432r The machine can be inspected under power by prior arrangement. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2000, operating hours: 43,000 h, machine/vehicle number: IntNr231372, STAR SA 16-12 CNC sliding headstock lathe, year of manufacture 2000 CNC control: FANUC 18i-T Operating hours: 43,000 Technical specifications: - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Maximum bar diameter: 12 mm Cgodpfoy U Hizjx Af Hsu - Z-axis travel: 140 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Number of tool stations: 13 SUB SPINDLE - Maximum bar diameter: 10 mm - Spindle speed: 8,000 rpm - Number of tool stations: 4 FMB Minimag bar feeder The machine can be inspected under power by appointment. Subject to prior sale. Technical data and specifications subject to change and correction.

Condition: used, Year of construction: 2000, operating hours: 44,000 h, machine/vehicle number: IntNr231371, STAR SA 16-12 CNC sliding head lathe, year of manufacture 2000 CNC control: FANUC 18i-T Operating hours: 44,000 Technical specifications: - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12 mm - Z-axis travel: 140 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Number of tool stations: 13 SUB SPINDLE - Max. bar diameter: 10 mm - Spindle speed: 8,000 rpm - Number of tool stations: 4 Cgedpfx Ajy U Hiujf Hou FMB Minimag bar loading magazine High pressure unit 40 bar The machine can be inspected under power by appointment. All technical details and information are subject to change and error. Prior sale reserved.

Condition: used, Year of construction: 2004, operating hours: 145,113 h, machine/vehicle number: IntNr231565, For sale: Highly dynamic CNC production turning center Gildemeister Speed 12-5 with IEMCA Smart 316 bar feeder Year of manufacture: 2004 Control: Fanuc 16i-TB Technical data Cjdpfxoy U Hh De Af Hogu MAIN SPINDLE - Max. bar diameter: 12 (15) mm - Travel: 120 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm COUNTER SPINDLE - Max. bar diameter: 12 (15) mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm Driven tools: - Tool drive power: 1.1 kW - Max. speed: 6,000 rpm Tools: - Number of tools: up to 20 (some driven) - Driven tools: 4–6, for milling, drilling, and threading operations - Tool holder: ER collet chucks or similar systems - Rear machining: 4 stations for backworking IEMCA Smart 316 / 32L bar feeder Year of manufacture: 2006 Bar diameter: 5–32 mm Bar length: 3,200 mm Small extinguishing system / Kraft & Bauer fire suppression system Operating manual Parts separator Chip conveyor system The machine can be inspected under power by appointment. Subject to technical changes and errors, as well as prior sale!

Condition: used, Year of construction: 2005, CNC Mitsubishi Mieldas 635 LC Max. machining diameter Ø 32 mm (from Ø 10 mm) Max. machining length 320 mm for the chuck Max. front drilling diameter Ø 12 mm Max. front tapping diameter M 10, tap M 8 (die) Through-hole diameter of the spindle Ø36 mm Main spindle speed from 200 to 8,000 min¯¹ Cedpfsy Uvy Ajx Af Hegu Main spindle speed change Continuous S + 4-digit numerical value Main spindle indexing 1° Main spindle C-axis 0.001° Max. diameter of the chuck Ø 32 mm of the rear spindle Max. workpiece length for pick-up 145 mm from the rear spindle Max. workpiece overhang length 25 mm of the rear spindle Max. drilling diameter in the Ø 10 mm rear machining process Max. tapping diameter in the M8 rear machining process Rear spindle speed from 200 to 7,000 min¯¹ Rear spindle speed change Continuous S + 4-digit numerical value Rear spindle indexing 1° Counter-spindle C-axis 0.001° Tool holder spindle Max. tapping diameter Ø 7 mm Spindle speed M 6 Spindle speed change from 200 to 5,000 min¯¹ Continuous S + 4-digit numerical value Opposite tool holder Max. drilling diameter Ø 7 mm Max. tapping diameter M 6 Spindle speed from 200 to 4,500 min¯¹ Spindle speed change Continuous S + 4-digit numerical value Guide sleeve and chuck models Main spindle chuck MC081-M Guide sleeve FG531-M Rego type ER16/AR16 chuck Rear spindle chuck FC081-M-K Number of tools to be mounted Up to 18 tools + α Tool dimensions Tool (multiple tool holder) 16 x 169 x 130 mm Sleeve (opposite tool holder) Ø 25.4 mm Maximum diameter of the tool mounted in the rotating tool holder of the tool holder Drill and front milling cutter Ø 10 mm Rapid feed rate 20 m/min Minimum increment of movement X1 axis 0.001 mm Y1 axis 0.001 mm Z1 axis 0.001 mm X2 axis 0.001 mm Z2 axis 0.001 mm Z3 axis 0.001 mm Axis travel X1 axis 108 mm Y1 axis 275 mm Z1 axis 325 mm X2 axis 228 mm Z2 axis 130 mm Z3 axis 410 mm Bar length 2,500 mm Center height 1,132 mm IEMCA BOSS 332-E BAR FEEDER INCLUDED Machine complete with manuals and CE declaration of conformity. All technical data shown are indicative and may be subject to change without notice, and therefore should not be considered binding.

Condition: used, Year of construction: 2024, Tsugami B0205-VR CNC Swiss-Type Lathe Mfd. 2024 Hours: 73 NEVER RAN PRODUCTION! Accessories & Options: Fanuc 0i-TF Control Fire Trace Fire Suppression (5 lbs) B0-WORK-KIT MKIII Work Conveyor Through Sub-Spindle Coolant with Pump Abile Programming Software Edge Scout 320 Barfeed Two Channel Sets Specifications: Max Machining Diameter: .787" Max Headstock Stroke: 6.69" (Guide Bushing) / 1.771" (Chucker) Cedpfey Um N Isx Af Hjgu Main Spindle Speed: 10,000 rpm Sub Spindle Speed: 12,000 rpm Live Tool Spindle Speed: 8,000 rpm Tool Positions: 21 Sub Spindle Max Machining Diameter: .787" Sub Spindle Front Ejection Max Length: 3.15" Max Tool Spindle Slotting Cutting Diameter: 1.18" Rapid Traverse Rate: 36M/min Main Spindle Motor: 7.5 hp | Sub Spindle Motor: 5.0 hp Coolant Tank Capacity: 47 gal. System Input Power: 13.0 KVA Compressed Air: 60 psi Dimensions: 69" x 41.5" x 67" | Weight: 3,968 lbs

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr230440, Control system, manufactured by CINCOM MITSUBISHI Meldas 6 axes (X1/Z1/Y1/C1/X2/Z2), Bar Ø max. 16 mm, turning length max. 200 mm, Main spindle, speed max. 10,000 rpm, C-axis 0.001 degrees, Counter spindle Ø max. 16 mm, Counter spindle speed max. 10,000 rpm, incl. spindle indexing Tool holder for a total of 17 tools (linear tool holder, front attachment, rear machining), Parts conveyor belt Chip conveyor Fire extinguishing system Loading magazine IEMCA Genius 118/3200 Year of construction 2005 The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved! control, make CINCOM MITSUBISHI Meldas 6 axes (X1/Z1/Y1/C1/X2/Z2), bar-Ø max. 16 mm, turning length max. 200 mm, main spindle, speed max. 10.000 rpm, C-axis 0,001 degree, counter spindle Ø max. 16 mm, counter spindle speed max. 10,000 rpm, incl. spindle indexing Tool holder for a total of 17 tools (linear tool holder, front attachment, backworking), parts conveyor belt Chip conveyor Codpsy Ulh Njfx Af Hegu Fire extinguishing system loading magazine IEMCA Genius 118/3200 year of construction 2005 The machine can be inspected by appointment. Changes and errors in the technical data and information and subject to prior sale!

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 119, spindle motor power: 5 W, turning length: 160 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 99 rpm, turning diameter: 16 mm, overall weight: 2,300 kg, type of input current: three-phase, bar passage: 16 mm, total width: 1,340 mm, total length: 1,850 mm, total height: 1,685 mm, input voltage: 380 V, number of driven tool stations in tool turret 1: 6, number of driven tool stations in tool turret 2: 6, Equipment: documentation/manual, rotational speed infinitely variable, I am offering my lathe for sale, complete with the accessories shown in the pictures. It includes a bar feeder and a chip conveyor. The machine is controlled by a Yasnac CNC system. The machine has two turrets, allowing for multi-axis and multi-group control. Cedpfx Afoy Udcfs Hogu

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 6,500 rpm, overall weight: 6,000 kg, bar diameter (max.): 42 mm, travel distance X-axis: 50 mm, travel distance Y-axis: 350 mm, controller manufacturer: MITSUBISHI, controller model: M730UM, number of axes: 10, This 10-axis DMG MORI Sprint 42/10 linear was manufactured in 2021. It features a maximum spindle speed of 6500 1/min and includes a high-pressure cooling system of 20 bar. The machine is equipped with a bar feeder of 3200 mm length and offers advanced capabilities for precision turning. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 42/10 linear machine we have for sale. Contact us for further details. • Maximum Speed Spindle 1: 6500 1/min • Maximum Speed Spindle 2: 6500 1/min • Max. travel Z-axis 120 mm • Electrical Phases: L1,L2,L3,N,PE Cgsdpsy T Hzujfx Af Hou • Power Consumption: 57 kVA • Maximum Input Current: 82 A • Main Fuse: 100 A • Short Circuit Rating: 5 kA • Maximum Voltage: 440 V • Operating Voltage: 400 V • Voltage Tolerance: ±10% • Frequency: 50 Hz • AC Voltage: 230 V • DC Voltage: 24 V • Counter Spindle Flushing: Included • Counter Spindle Inner Cooling: Included • Main Spindle Inner Cooling: Included • Radial Driven Drilling and Milling Unit for Revolver: Included • Axial Driven Drilling and Milling Unit for Revolver: Included • Angular Adjustable Driven Drilling and Milling Unit: Included • High Pressure Cooling System: 20 bar • Bar Feeder: IEMCA BOSS 552 • Bar Feeder Length: 3200 mm Technical Specification Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2018, operating hours: 16,187 h, functionality: fully functional, machine/vehicle number: 14396, spindle motor power: 11,000 W, spindle speed (min.): 8,000 rpm, spindle bore: 26 mm, overall weight: 7,000 kg, feed length X-axis: 170 mm, feed length Y-axis: 55 mm, feed length Z-axis: 150 mm, feed rate X-axis: 55 m/min, feed rate Y-axis: 16 m/min, feed rate Z-axis: 75 m/min, bar diameter (max.): 28 mm, bar length: 3,000 mm, number of spindles: 8, Equipment: documentation/manual, MULTISWISS 8 x 26mm TURNING CENTERS. Year 2018, with 16,000 operating hours. Machine in perfect working condition. 8 independent spindles controlled by a CNC SIEMENS system. 3 spindles with Y-axis movement. Bar feeder for 3m bar length, up to 26mm diameter, with a magazine for 34 bars (26mm). CO2 extinguishing system manufactured by KRAFT&BAUER. Mist extraction system. Cgsdey Txy Aepfx Af Hju

Condition: ready for operation (used), Year of construction: 2010, Dugard 32 SBP D/E Sliding Head CNC Lathe Machine Type: Sliding Head CNC Lathe Year: 2010 Country of Manufacture: Taiwan Machine Builder - Chiah Chyun Machinery Co. Ltd. Control System -CC Machinery CNC Control Barfeed - Barload Machine Co. Ltd. Machine remains under power in Birmingham Machine was in production at time of inspection Terms of Sale: Sold EX WORKS Birmingham, UK Supplied with: Tooling as Photographed Machine & Barfeed manauls Swarf Conveyor (Not Pictured) Barfeed For Sale with Jet Machinery Ltd Jet Machinery Stock Number: N/A Machine Serial Number: BC991116 £17,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Cgodpfsy Tcuwjx Af Heu Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 37,578 h, bar diameter (max.): 8 mm, number of axes: 9, This Tornos Deco 10 was manufactured in 2005. A swiss type turning machine featuring a drum with loading magazine, a filter with a 25-liter capacity, and an integrated hydraulic unit. It supports various bar diameters up to 8 mm, ensuring versatility for precision work. Consider the opportunity to buy this Tornos Deco 10 swiss type turning machine. Contact us for more information. • Drum with loading magazine • 10+5" HYBRID drum • Integrated hydraulic unit Cgjdpfx Aoy S Aq Aef Heu • Support leg rear/front • 1100 mm center height • Filter with 25 liter capacity • Electrical: 380 V, 3-phase, 50/60 Hz motor voltage • Control voltage: 24 V DC • Bar compatibility (for 14 guide tubes): • 1–4 mm diameter bars • 4 mm diameter bars • 8 mm diameter bars Additional equipment • 1 piece oil basin • 1 chip collecting basinOptional: Comprehensive package of measuring instruments Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2006, controller manufacturer: FANUC, controller model: 16i-TB, This TORNOS DECO 10a was manufactured in 2006. It features an integrated bar loader with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. The machine includes a Robobar SSF 3m loading magazine and a FANUC 16i-TB control system, ensuring precise and efficient operations. Ideal for intricate Swiss-type turning tasks. Contact us for more information about this machine. 2 similar machines available! Additional information • Maximum bar length: 3200 mm • Bar capacity: Minimum 2 mm, Maximum 10 mm • Max diameter without preparation: 8 mm (without clamp) • Motor voltage: 400 V • Control voltage: 24 V • Independent counter spindle (S4) • FANUC 16i-TB control system • 1 cross slide with 4 tool holders • Sensor for tool breakage detection • Center height: 1100 mm • Automatic and integrated bar loader with oil bath • Robobar SSF 3m loading magazine • Front/rear support foot • "HYBRIDE 10+5" drum with 14 guide holes for 1-4 mm and 14 guide holes for bars 4.1-10 mm without bar preparation up to 8 mm • Electrical control box • Integrated 25-liter hydraulic unit with filter • Moving headstock • Directed spindle stopOptional: Comprehensive package of measuring instruments Cgedjy S Aqiopfx Af Heu

Condition: good (used), Year of construction: 2008, functionality: fully functional, 2008 CITIZEN Cincom M332-III Fully serviced, well maintained, and ready to go: Cedey Sycvspfx Af Hjgu ✔ Iemca Boss 332 R - 3m Magazine Bar Feeder ✔ Coolblaster High Pressure Coolant ✔ Absolent Mist Extraction ✔ Selection of Static & Driven Tooling ✔ Fire Suppression System

Condition: used, Year of construction: 2016, machine/vehicle number: 16-927, CNC control FANUC Series 31i MODEL B, spindle bore 20 mm, 8 axes including Y2 axis, main and sub-spindle with max. speed 8,000 rpm, driven tools, machine weight 3,800 kg, with bar feeder FMB Minimag 21, with coolant system, filtration unit, KRAFT & BAUER fire extinguishing system, and chip conveyor. Cgedpfxsy Sqf Us Af Hju

Condition: used, Year of construction: 2004, machine/vehicle number: 1057, CNC control TRAUB System TX 8 H, bar capacity 42 mm, max. turning length 450 mm, max. spindle speed 8,000 rpm, 2 turrets each with 10 tool stations, driven tools, KNOLL RP band filter system, chip conveyor. Csdpfx Aoy Sqhisf Hjgu

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Turning Automatic Lathe - Longitudinal | Brand: MAIER | Type: MLK 26F1.5 | Year of construction: 2018 The machine can be inspected by appointment under power. Condition: Well maintained, fully functional / ready for use. Operating hours: approx. 28.797 hours. TECHNICAL SPECIFICATIONS: - Axes: 11 - Turning diameter over bed: 32 mm - Spindle bore: 32 mm - Channel 1/Z1 > Spindle stroke: 180 mm (short-run configuration), 340 mm (long-run configuration) - Main spindle speed: 6.000 rpm - Spindle motor power: 5.5 / 3.7 kW - Channel 2/Z2 > Turning length (counter spindle): 340 mm Cgsdpfx Aoy Sp Twef Hju - Counter spindle speed range: 8.000 rpm - Clamping chucks: 1536E - Drive motor power: 5.5 / 3.5 kW - Total power requirement: 28,7 kW, 60 A - Machine weight approx.: 4,4 tons - Space requirements: approx.: 8,0 x 2,7 x 2,1 m ACCESSORIES / EQUIPMENT: - CNC control: FANUC 31i-B - 1 counter-spindle - NC C-axis on main and counter-spindles - Tool holders for 5 fixed turning tool holders, cross-section 16 x 16 mm - Bar loading magazine, make: FMB Turbo Ø 3–36, year of manufacture: 2018 Guide channel DM12 - Chip conveyor - Electronic handwheel - High-pressure system, make: KNOLL, 50 bar with paper belt filter system - Fire protection system, make: KRAFT & BAUER - Extraction system - Documentation - CE marking Additional accessories are available for purchase. Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -