NFZ-Baur

Condition: used, Year of construction: 1977, pressure 100 t throat 350 mm stroke 6 - 100 mm no. of strokes 60 /min distance table/ram, max. stroke up, adjustment up 400 mm Kledpfxeylzwys Afvon table surface area 850 x 700 mm hole in the table 470 x 150 mm table height over floor 855 mm ram surface 450 x 300 mm ram adjustment 80 mm power requirement 7,5 kW weight 5,0 t dimensions (WxDxH) 1,5 x 2,3 x 2,6 m SPECIAL DEAL as is where is, WITHOUT putting into operation as spare part dispenser, free loaded to truck

Condition: used, Year of construction: 1976, pressure 400 t stroke 30 - 300 mm no. of strokes 55 /min throat 500 mm passage to the back 800 mm Kledpfx Asylzwtofven dayligth 950 mm table surface area 1580 x 1000 mm hole in the table 400 x 400 mm table height over floor 800 mm ram surface 1000 x 720 mm ram adjustment 125 mm power requirement 37,0 kW Weight 25,0 t dimensions (WxDxH) 2,5 x 3,1 x 5,1 m

Condition: used, pressing force: 150 t, Eccentric Press Brand: ULECIA Serial No.: 1877 Kledpfsylzcvex Afvjn Type: Pneumatic Clutch Force: 150 t Strokes per minute: 40 Stroke (Max / Min): 160 / 24 mm Power: 10 HP *The press is delivered as is, without any type of warranty.

Condition: used, Year of construction: 1959, functionality: fully functional, WEINGARTEN XTR I – 200 t Eccentric Press Manufacturer: Maschinenfabrik Weingarten A-G Delivery date: 12/1959 Type: XTR I Order No.: 2586/58 📋 Technical Data (read from nameplate) Press force: 200 t Max. sheet thickness: 20 mm Kljdpjyk Sqhofx Afven Strokes per minute: 32 spm Ram stroke: 40 – 180 mm Ram adjustment: 110 – 40 mm Maximum distance table to ram bottom: 460 – 320 mm This machine is a classic mechanical eccentric press with flywheel drive. ⚙️ Equipment as per photos Strip decoiler / coil feeder included Servo feed “Servopower 2020” (retrofit) Safety enclosure / safety fence Electrical control cabinet Tool clamping system installed Mechanical clutch/brake drive Heavy-duty cast iron frame

Condition: good (used), Year of construction: 2001, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 2137/00/1400574, throat depth: 320 mm, table height: 800 mm, total height: 3,230 mm, drop-through hole in table: 300 mm, table width: 660 mm, table length: 1,100 mm, installation height: 385 mm, total width: 1,610 mm, total length: 1,785 mm, pressing force: 100 t, For sale: PME eccentric press PE 100/C Kodpfjyk Agyox Afvsln - very few operating hours - machine in very good condition - without installation tooling

Condition: like new (used), Year of construction: 1985, operating hours: 200 h, functionality: limited functionality, machine/vehicle number: 38754, pressing force: 250 t, This plate bending machine was installed new in 1989 and was used for 200 Hrs and never used ever since. The mechanical parts are fully functional and are in perfect condition but the electrical board needs fixing. Force: 250 mp (metric tons) Working Surface Length: 5600 mm Working Surface Width: 400 mm Working Surface Height: 100 mm Weight: Approximately 37,000 kg Press Sizes (LxHxW): 5700 x 3150 x 5200 mm Kljdpfx Afsykl Iasvsn

Condition: used, Year of construction: 1975, pressure 200 t stroke 20 - 200 mm ram adjustment 130 mm daylight (stroke down, ram adjustment above) 380 mm table surface area 1150 x 800 mm no. of strokes 25 - 75 Hub/min total power requirement 9,8 kW Kedpfjyhq Sxox Afvsln dimensions of the machine ca. L 1,7 x B 3,0 x H 3,8 m

Condition: good (used), Year of construction: 1981, functionality: fully functional, Machine parameters: Rated forming force: 250 t Stroke: 45 mm Klsdpfx Ajyg Sicofvsn Description: The machine is in good technical condition; testing can be arranged upon prior agreement. Dimensions: 2580 x 1350 x 2975 mm Power requirement: 22 kW Czech documentation Machine weight: 12,880 kg

Condition: used, Year of construction: 1976, Press force 2,500 kN Throat depth 450 mm Adjustable stroke 20 - 140 mm Max. ram adjustment 100 mm Ksdpfoyg Efdex Afveln Stroke rate 20 to 60 per min Machine weight approx. 19,000 kg Press overhauled in 1996 Further data and photos upon request

Condition: used, Year of construction: 1980, Pressing force 1,100 kN Adjustable stroke 20 - 120 mm Kodpjyg Ecpofx Afvjln Ram adjustment max. 85 mm Strokes per minute 35 / 70 1/min Machine weight approx. 5,100 kg Further data and images available on request

Condition: used, Year of construction: 1984, Press force 1,500 kN Adjustable stroke 20 - 120 mm Kledpfoyg Ebxex Afven Ram adjustment max. 85 mm Stroke rate 50 / 75 1/min. Machine weight approx. 8,000 kg Further data and images available on request

Condition: used, Year of construction: 1990, From the Gütersloh site we offer a well-maintained eccentric press Pressure 100 t Displacement 330 mm Hub 10-130 mm Speed 56 RPM Eccentric adjustment 80 mm Table surface 830x600 mm Kljdpfx Afeyglzfoven Piston face 250x130 mm Table height 870 mm Taper hole in the piston 50 mm Machine weight approx. 11 t Space requirement approx. WxDxH 2100x1900x3000 mm

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, Eccentric Press - Single Column Manufacturer: ZTS Kosice Model: LEK 160 Year of manufacture: 1991 Capacity: 1600 kN = 160 tons Throat depth (vertical distance from ram axis to the front face of the frame in the working area): 355 mm Shut height (distance between table and ram surfaces in bottom dead center): 455 mm Adjustable stroke: 25 - 160 mm Working stroke: 5.3 mm Ram adjustment: 100 mm Max. strokes per minute: 50 SPM Usable strokes per minute: 32 SPM Ksdpfx Afsygh Ihjvsln Table clamping surface: 1000 x 740 mm Table plate size: 980 x 710 mm Ram size: 710 x 425 mm Table plate thickness: 100 mm Table opening: D 290 x H 8 mm Ram clamping opening: d 50 HB x 85 mm Motor power: 11 kW Voltage: 380 / 220 V Frequency: 50 Hz Working air pressure: 0.6 Pa Overall dimensions (L x W x H): 1380 x 2400 x 3350 mm Weight: 13,000 kg

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, Manufacturer: KOSICE Model: LE 160 C Year of manufacture: 1990 Machine No.: 2291458 Condition: Good / operational Table clamping surface: 1000 x 720 mm Weight: approx. 10,800 kg Width (including control cabinet): 1,500 mm Throat depth: 355 mm Pressing force: 160 tons Stroke rate: 50 / min continuous operation Stroke rate: 30 / min single operation Motor power: 11 kW Ram adjustment: 0 – 100 mm Stroke adjustment: 20 – 120 mm Ram clamping surface: 750 x 380 mm Max. distance ram – table: 450 mm Pass-through hole in table: 480 x 300 mm Air clutch: 6 bar External dimensions: Depth: 2,360 mm Height: 2,850 mm Including: Press safety control Starkstrom Gummersbach Electric auxiliary brake Desch Additional table plate: 900 x 580 mm Two-hand control panel Ksdpfx Afsyghx Tevoln Foot switch Central lubrication Intermediate table Latest safety inspection (UVV): 2024

Condition: used, Year of construction: 1997, functionality: fully functional, Pressing force 3,200 kN Throat depth 450 mm Ksdpfjyc N Emox Afvsln Distance table – ram 600 mm Table size 1,650 mm x 900 mm Ram size 1,400 mm x 800 mm Adjustable stroke 20 mm – 160 mm Max. ram adjustment 100 mm Stroke rate 20 – 60 strokes/min. Drive power 37 kW Machine weight approx. 30,000 kg With roller feed + decoiler Further data and images available on request

Condition: used, Year of construction: 1981, functionality: unexamined, machine/vehicle number: 2648481, table height: 810 mm, table width: 520 mm, total width: 1,100 mm, total length: 1,200 mm, overall weight: 1,375 kg, control cabinet length: 900 mm, control cabinet height: 935 mm, control cabinet width: 450 mm, stroke length: 120 mm, year of last overhaul: 2023, DGUV inspection last carried out in 2022 (next inspection due 4/2023). Hydraulic system is leaking. Control cabinet separate. Self-collection only, loading at buyer's expense. No warranty. Please call if interested! Klodpfx Afsyaq Uwevsn

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, throat depth: 450 mm, Very good condition! With gearbox: Capacity: 300 t Strokes: 35 spm Throat depth: 450 mm - Pneumatic clutch - Ram weight balance Kljdpfoyahw Njx Afven Ram stroke: 20 - 140 mm Ram adjustment: 80 mm Motor power: 30 HP

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, Eccentric Press Manufacturer: Kieserling Model: Pedru 100 / 320 Year of Manufacture: 1988 Table Size: 850 x 610 mm Clear Space between Uprights below Guideways: 400 mm Ram Length: 600 mm Ram Width: 355 mm Ram Bore: 50 x 85 mm Continuous Stroke Rate: 56 strokes/min Tool Height: 300 mm Kledox U Tvbepfx Afvon Installation Height: 310 mm Table to Ram Distance at Max Stroke: 310 - 520 mm Table Thru-Hole: 335 / 300 mm diameter x 45 mm Stroke Range: min. 10 mm - max. 130 mm Bore Length: 126 mm Table Plate Thickness: 90 mm Ram Adjustment: 80 mm Drive Capacity: 11 kW / 1500 rpm Weight: 9000 kg Floor Space Required: 1900 mm Height: 3150 mm Shearing Mechanism in Ram, Two-Hand Control, Additional Brake

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, Eccentric Press Manufacturer: Kieserling Model: Pedru 100 Year of manufacture: 1988 Table size: 850 x 610 mm Ram length: 600 mm Ram width: 355 mm Clearance below guides: 400 mm Ram length: 600 x 355 mm Ram hole: 50 x 85 mm Installation height: 310 mm Tool height: 300 mm Distance table to ram at max. stroke: 310 - 520 mm Table through-hole: 335 / 300 mm diameter x 45 mm Table plate thickness: 90 mm Ksdpox U Tp Usfx Afvoln Stroke min.: 10 mm – max.: 130 mm Hole length: 125 mm Ram adjustment: 80 mm Power: 11 kW / 1500 rpm Weight: 9000 kg Floor space required: 1900 mm Height: 3150 mm Shearing device in ram, two-hand operation, additional brake

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Kljdpfx Aex U Eiasfvsn Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: good (used), Year of construction: 1988, functionality: fully functional, total height: 2,590 mm, total width: 1,270 mm, total length: 2,310 mm, overall weight: 10,150 kg, pressing force: 160 t, power: 11 kW (14.96 HP), input voltage: 400 V, year of last overhaul: 2023, For sale: Used ZTS LE 160 C eccentric press, year of manufacture 1988. The machine is in good technical condition, except for the paint coating. All control solenoid valves were replaced in February 2023. The machine has been seldom used for a long period and has been in our possession for 20 years. Machine number: 2291286 Klsdpfx Afjx Rcgzsven Machine type: LE 160 C Year of manufacture: 1988 Maximum pressing force: 1600 kN Power: 11 kW Voltage: 400 V Weight: 10,150 kg Total length: 2310 mm Total width: 1270 mm Total height: 2590 mm If you have any questions or need further information, please send a message or contact us by phone.

Condition: used, Year of construction: 1990, ECCENTRIC PRESS GIZELIS 150t PRESSURE 150t TABLE DIMENSIONS 1000x660 mm Kledpex N Sr Defx Afven STROKE 120-220 mm POWER 11 kW WITH HYDRAULIC CLAMPING SYSTEM

Condition: used, Year of construction: 1990, ECCENTRIC PRESS GIZELIS 200t PRESSURE 200t TABLE DIMENSIONS 1000x660 mm STROKE 17-230 mm POWER 11 kW WITH HYDRAULIC CLAMPING SYSTEM Kjdpfox N Sqyox Afvoln

Condition: new, Year of construction: 2025, throat depth: 370 mm, table width: 700 mm, table length: 1,200 mm, stroke adjustment: 150 mm, pressing force: 300 t, stroke length: 200 mm, power: 30 kW (40.79 HP), Equipment: documentation/manual, safety light barrier, An eccentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and die forming, utilizing force generated through an eccentric mechanism. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 300 Ton is designed for stable operation in cold forming applications. Its rigid steel construction frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure provide reliable performance suitable for series production. Key advantages Stable stroke performance and high repeatability in mass production Operator safety-focused design (light curtain + safety systems) Low maintenance requirement with centralized automatic lubrication Production-ready operation with PLC control + two-hand/foot pedal control Areas of application Cold cutting and punching operations Cold forming applications Metal die forming High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • Four-way guided slide system • Spheroidal graphite cast iron connecting rod and gear seats • Crankshaft and drive shafts made of 4140 tempered steel • Centralized, fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directives compliant • Dual-coil safety valve • Manually adjustable stroke • Ray barrier finger–hand protection safety system • PLC control system • Dual hand/foot pedal control system • Mechanical safety system • Emergency reverse motor function • Compliant with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare bolster plate • Decoiler, feeder, and straightener • One set of dies manufactured to required specifications • Eight-way guided slide system ✅ TECHNICAL SPECIFICATIONS (300 TON) Capacity: 300 Ton Throat depth: 370 mm Distance table–ram: 530 mm Slide–table distance: 650 mm Distance between uprights: 470 mm Ram adjustment (stroke setting): 150 mm Approximate press width: 2000 mm Approximate press depth: 2700 mm Approximate press height: 3200 mm Front anchoring dimension: 940 mm Klsdpfx Afex N Nfhovjn Side anchoring dimension: 1440 mm Table bore diameter: Ø260 mm Table size: 700×1200 mm Die mounting hole diameter: Ø60 mm Ram size: 780×400 mm Table height from floor: 810 mm Stroke adjustment: 20–200 mm Strokes per minute: 38 SPM Motor power: 30 + 2.2 kW Motor speed: 1450 rpm Approximate weight: 13,200 kg Note: Please inform us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, throat depth: 350 mm, table width: 700 mm, table length: 1,100 mm, stroke adjustment: 150 mm, pressing force: 250 t, stroke length: 160 mm, power: 22 kW (29.91 HP), Equipment: documentation/manual, safety light barrier, An eccentric press is a type of mechanical press powered by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Its high production speed and repeatability make it an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 250 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch–brake system, and CE-compliant safety infrastructure deliver reliable performance suited for serial production. Key Advantages: - Stable stroke performance and high repeatability for mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready use with PLC control and dual hand/foot operation Applications: - Cold cutting and punching operations - Cold forging applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel structure frame • Four-sided guided slideways • Spheroidal cast iron connecting rod and gear seats • Crankshaft and driven shafts made of 4140 quenched and tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • Compliant with CE safety directives • Dual solenoid safety valve • Manually adjustable stroke • Light curtain finger-hand protection safety system • PLC control system • Dual hand/foot control system • Mechanical safety system • Emergency reverse motor operation • Compliant with occupational safety regulations • In accordance with CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton models) • Hydraulic safety system (standard for 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One set of die configured to your specifications • Eight-sided slide guidance ✅ TECHNICAL SPECIFICATIONS (250 TON) Capacity: 250 Ton Throat depth: 350 mm Table–ram distance: 520 mm Kodpfxex N Nfbe Afvoln Ram–table clearance: 630 mm Distance between side frames: 520 mm Ram adjustment (regulation): 150 mm Approximate press width: 2000 mm Approximate press depth: 2500 mm Approximate press height: 3100 mm Front anchorage dimension: 930 mm Side anchorage dimension: 1430 mm Table bore diameter: Ø250 mm Table size: 700×1100 mm Die mounting hole diameter: Ø60 mm Ram size: 670×380 mm Table height from floor: 810 mm Stroke adjustment: 20–160 mm Strokes per minute: 40 spm Motor power: 22 + 2.2 kW Motor speed: 1450 rpm Approximate weight: 12,000 kg Note: If you require changes to the technical specifications, please inform us. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales support are managed by CRONOSSTECH.