Getränke Lemberger

Condition: used, Year of construction: 2018, REF: MM6441 Wenzhou Jiangbo Dairy Equipment Factory Co. Ltd (Chinese) 5000L stainless-steel tank with agitator. Model - DCG. Serial no. - 180919. Date of manufacture - 2018. Speed - 36 r/min. Electrical requirements – 415 V / 50 hz / 3 phase. Bodpfx Asza T Sljf Rsdc

Condition: used, REF: MM6436 Chinese 4-head filler with gating system and touch-screen controls. Valves capable of hot filling. Bdjdpfjza T I Hex Af Roc Previously used for filling a 500ml syrup product, potentially 250-1000ml range. Electric requirements - 240V / 50 hz / 1 ph. Belt - 82mm. Overall dimensions - 2100mm long x 1030mm wide x 1950mm high. Will need guarding to meet CE spec.

Condition: used, Year of construction: 2012, Overview This returnable glass bottling line consists of equipment from KRONES, KETTNER, GM GERA, RINK, SYSCONA, MATEC, FALTERBAUM, Bohrer and further supporting manufacturers. The line is designed for the processing of returnable glass bottles in crates, mainly in 0.33 L and 0.75 L formats. It includes the key process steps from crate depalletizing, crate sorting, bottle decapping, unpacking, bottle washing, empty bottle inspection, filling and screw capping to labelling, full bottle inspection, crate packing, crate inspection and palletizing. The existing crate depalletizer and palletizer are available on site; however, due to their age and outdated technology, it is recommended not to include this unit in the line acquisition. Instead, suitable modern depalletizing equipment can be offered and integrated into the line concept according to the buyer’s requirements. The line has a nominal filling capacity of approx. 18,000 bottles per hour and the premix system rated at 22,000 L/h. The line is scheduled for dismantling in February 2027. Technical Data Line type: Returnable glass bottling line Application: Beverage filling in returnable glass bottles Formats: 0.33 L and 0.75 L glass bottles Packaging: Bottles in crates Filler capacity: 18,000 bottles/hour Premix capacity: 22,000 L/hour Closure type: Plastic screw caps Labelling: Wet glue labelling, 2 aggregates Main machine years: 1996 – 2016 Dismantling planned: February 2027 Scope of Delivery Crate Depalletizer | Existing unit on site; not recommended for takeover due to outdated technology. Suitable replacement equipment can be offered and integrated Crate Sorting System | Syscona | Expert KSA | Sorting on 2 lanes: good / bad | 2014 Crate Decapper | RINK | KM 690/4K | 2012 Crate Unpacker | Kettner | Robot Junior RA3/C-T | 1996 Bottle Washer | GM GERA | ARCADE GEL3 FV1-186/95-16 | 2005 Crate Washer | Bohrer | R 30 | Crate washing machine | 2011 Empty Bottle Inspector | Krones | Linatronic | 2014 Filler / Screw Capper | Krones | Volumetic / Modulfill | 2012 Labelling Machine | Krones | Universella | 2012 Closure Inspection | Syscona | Expert FHK | 2016 Inspection System | Krones | Checkmat 731 | 2012 Crate Packer | Kettner | 1996 Crate Inspection | Krones | Checkmat 708 | 2011 Palletizer | Matec | Rotomat 3B | 2002 Falterbaum | 20000TD | Premix system; capacity 22,000 L/h | 2000 Bodpfjza Tx Sex Af Rodc

Condition: used, Year of construction: 2021, REF: MM6437 1 x Seveo Fluss 2x cyclised pump for Intamac filler, with shut-out valves. Mounted on stainless-steel frame. Model - VM1000B. Bjdpfsza Txxex Af Redc Serial no. - 2450. Date of manufacture - 2021. Overall dimensions - 1130mm long x 450mm wide x 800mm high.

Condition: excellent (used), Year of construction: 2019, REF: MM6442 Zhangjiagang Angel Beverage Machinery Co. Ltd (Chinese) aluminium can seaming machine for 200mm diameter cans. Model - FXZ-1. Serial no. - Angel201906. Date of manufacture - 2019. Speed - 1000 cans/h. 82mm wide belt. Overall dimensions - 3000mm L x 1040mm W x 2000mm H. Condition - Good, Trial works only.  Bdjdsza E N Nopfx Af Rsc CE marked/approved.

Condition: used, Year of construction: 2007, REF: MM6439 Bdedpfx Afsza Eyue Rec Wick und Schaefer GmbH flow-meter rotary filler set up for 500ml PET sports cap filler with bottle cap Infeed/sorter and bottle cap tightener. Model - MIN.FM.Servo. Serial no. - 62006122. Date of manufacture - 2007. 2-stage filling - stage 1 is main fill and stage 2 is final top up fill. With attachment for CIP. Previously used for vitamin enhanced flavoured water. Overall dimensions - 3600mm long x 2130mm wide x 2300mm high.

Condition: used, Year of construction: 2019, REF: MM6433 Zhangjiagang Beverage Machinery Co. Ltd (Chinese) single-head screw cap capping machine. Model - FXJ-1. Bjdpfoza Ekgox Af Rjdc Serial number - ANGEL201909. Date of manufacture - 2019. Capacity - up to 1,500 bottles / hour. Belt width - 82mm. Electrical requirements - 380 V / 509 hz / 3 phase. Overall dimensions - 3000mm long x 900mm wide x 1910mm high.

Condition: repair required (used), Carbonator for carbonating bottled water. Manufacturer: RIVI Model: SIRIO 25 Year of manufacture: 1993 Bsdpszazwvjfx Af Rjdc Capacity: approx. 25,000 m3/h Used machine, no control program included.

Condition: used, Year of construction: 2020, Overview  This labelling machine was manufactured in 2020 by Gernep. The machine is designed for labelling applications in the juice industry. The machine is currently still installed and under power and can be visited on request. Technical data Capacity: 10,000 bph Application: Juice Configuration: Gernep Labetta 4/3/10 640 2A Labelling technology: Cold glue / Rollina Labelling stations: 2 × cold glue aggregates Bottle Formats Container type: Glass bottles (fruit juice) Typical formats: 1.0 L VDF (H=307 mm, Ø90 mm) 0.5 L NRW (H=260 mm, Ø68 mm) Special capability: Suitable for hot-fill applications Label Data 1st cold glue station: Label length: approx. 25 – 140 mm Label height: max. 150 mm Lower edge: max. 15 mm Upper edge: max. 320 mm 2nd cold glue station (incl. wrap capability): Label length: approx. 25 – 140 mm Up to 170° wrap-around of bottle circumference Label height: max. 150 mm Lower edge: max. 15 mm Upper edge: max. 220 mm Applications: Body label Front (chest) label Back label Bjdpfezazkvjx Af Rodc

Condition: used, Year of construction: 2017, Overview  This filling monoblock was manufactured in 2017 by CIMEC. The machine is designed for filling applications in the liquor and spirits industry. The machine is currently still installed and can be visited on request. Technical data  Capacity: approx. 3,000 bottles per hour Application: Filling (liquor / spirits) Configuration: Model MONDIAL MONOBLOCK LD 9/8 Filling System: Gravity filling Number of Filling Valves: 8 Number of Rinsing Nozzles: 9 Number of Labelling Heads: 1 Sealing: It applies heat shrink capsules on the neck Water Pressure (Rinsing): 2 – 3 bar CIP Cleaning Temperature: up to 80°C (water) / 100°C (steam at low pressure) Electrical Supply: 400V, 50Hz, 3-phase Components & Features: Rinsing & Filling Section: 9-head bottle rinser with “No Bottle / No Spray” system 8-valve gravity filler with adjustable filling level Electrical regulation of filling height and level Support system for heavy bottles Automatic tank level control via sensors Compatible with multiple bottle neck formats (including change parts) Labeling & Sealing Unit: Self-adhesive labeler (1 head) Optical label centering system for precise application Capability to apply label and back label on the same bottle Automatic capsule dispenser with thermal sealing head Guides and supports for multiple cylindrical bottle formats Control & Operation: Touchscreen interface with electronic control Adjustable production speed (manual and automatic modes) Entry and exit bottle sensors Integrated safety systems with automatic stop functions CIP (Cleaning in Place) function for internal cleaning and sanitation Bdsdpszaw Rrefx Af Roc

Condition: used, Year of construction: 2017, Overview  This labelling machine was manufactured in 2017 by NCM Maquinaria. The machine is designed for labelling applications in the wine industry. The machine is currently still installed and can be visited on request. Technical data  Capacity: 1,500 – 2,000 bph Application: Wine Configuration: Model LV+5 Type: Self-Adhesive Compatible Bottle formats: 250 ml – 500 ml – 750 ml 1 L - 1.5 L Nº of Heads: 4 Label Types: Front, back, neck and fiscal stamp labels Bjdpfx Ajzaw Rljf Redc

Condition: used, Year of construction: 1992, Overview This carbonator was manufactured in 1992 by Germany KHS. The KHS CX 30 is designed for the production of carbonated mineral water. The unit was upgraded by KHS in 2014 and has a capacity of up to 30,000 litres per hour. The machine was in production until March 2025, was dismantled in December 2025, and is currently stored in a warehouse in Bippen. The machine is available immediately. Technical data Capacity: 30,000 litres/hour Application: Carbonated mineral water Configuration: Carbonator with pumps, tank, and accessories CO₂ rate: max. 8 g/litre Drive: Siemens S7 Scope of Delivery Carbonator | KHS | CX 30 | 1992 (upgraded 2014) | Complete system Pump system  Tank | KHS  Control system | Siemens | S7  Bdjdpfozavp Hox Af Rsc

Condition: excellent (used), For measuring the opening and closing torque of screw caps, lids, etc. - Material: Aluminum, robust design - Direction of rotation: Clockwise and counterclockwise - Adjustable: for various bottle and jar sizes - Bottle/jar diameter: 0-115 mm - Measuring range: 0-340 Ncm / 0-30 in-lbs Bdodjzat E Espfx Af Rsc - In very good condition

Condition: used, Year of construction: 2002, functionality: unexamined, total height: 2,500 mm, total width: 1,500 mm, total length: 1,950 mm, input voltage: 380 V, Wide-belt sander from BMS Holland BV, complete with a dust extraction hood and control panel. Details: Brand: BMS Holland BV Model: SB 450 KS Year of manufacture: 2002 Design: enclosed machine housing with a viewing window Components: dust extraction hood, control panel with emergency stop and switches Color: blue/white Dimensions: 1950x1500x2500 mm Voltage: 380V Condition: used Note: Machine is not connected; operational status unknown. Bodpfozab Unex Af Rodc

Condition: ready for operation (used), Year of construction: 2017, For sale is a fully functional post-mix syrup system from a production liquidation in the beverage industry. The system was last used in a professional beverage production facility and includes several components for the processing, pasteurization, and filling of post-mix syrups. Ideal for: - Beverage manufacturers - Food production - Syrup & post-mix production - Bottling plants - Components of the system: Tanks / Containers - Tank for Syrup Mobil 500 – CONTAINER KG – Year of manufacture 2017 - Tank for Syrup Mobil 1000 – CONTAINER KG – Year of manufacture 2017 Production & Filling Technology - Postmix Syrup Pasteur (BIB & CT) – KREUZMAYR – Year of manufacture 2017 - Postmix Container Filler – KREUZMAYR – Year of manufacture 2017 - Recooling for Postmix Syrup – FISCHER – Year of manufacture 2017 Details about the system: - Application: Pasteurization of post-mix syrup (Bag-in-Box & Container) - Condition: operational / functional - Maintenance documentation & videos available if applicable - Includes accessories and existing spare parts Special features: - Industrial quality – ready for immediate use - Ideal for beverage manufacturers / bottlers - System can be inspected in operation on site - Professional dismantling organized Bdsdpfoy Uy Nzex Af Rsc

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Complete bottle sorting, filling and capping system, previously used for 1L bottles. This system comprises of: 1 x Elevator for caps. Discharge height - 2020mm H. Overall dimensions - 2150mm L x 1120mm W x 23500mm H. 1 x Lazy Susan bottle sorter on height adjustable feet. 1 m diameter. Overall dimensions - 1700mm L x 1250mm W. Bdsdpfxey Upbto Af Roc 1 x Alpha Pack Europe srl / Intamac filling and capping system with cap sorting bowl, used for up to 1L bottles. Model - 9888L-2. Serial no. - 20210115. Date of manufacture - 2021. Was filling 1L wine bottle shaped PET bottle. Caps - applying 39mm diameter cap. Belt - 190mm wide. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 3.5 kW. Air pressure - 6 bar. Overall dimensions - 2750mm L x 1900mm W x 2000mm H.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, 1 x Cimec America Rinser, 8-Head Filler and Capper. This is a compact, automatic monoblock bottling system equipped with 9 x rinsing nozzles, 8 x isobaric (counter-pressure) filling valves, and 1 x capping head. It is highly engineered for rinsing, filling, and crowning still and carbonated beverages. Type - AM/DPS 9/8/IC/IVA. Serial number – 045. Date of manufacture - 2004. Equipment Included: Bedpfx Afjy Um Ano Redc • Rinser, filler and crown capper integrated. ROPP capper currently disabled. • All conveyors and drive motors – both ends. • Various change parts including 200ml and 330ml (currently installed). Output speed - Capable of up to 1,800 bph, depending on the bottle volume and product type. Overall dimensions - 3.5 m long x 1.4 m wide x 2.6 m high (approx.). Last in production in August 2025.

Condition: used, Year of construction: 2004, OVERVIEW This Krones KES-2-4-312/25-110 bottle washing machine is designed for the industrial washing of returnable glass bottles in beverage production lines. The machine is equipped with 25 bottles per row and has a rated capacity of up to approx. 28,000 bottles per hour. The machine can process bottle formats from 300 ml up to 1,000 ml, making it suitable for breweries, mineral water producers, soft drink producers and other returnable bottle operations. The washing machine is mainly built in stainless steel, with an insulated stainless steel caustic bath and steam heating system. The machine will be delivered completely reconditioned. The reconditioning scope includes the bottle infeed and outfeed, heating system, pumps, main chain, valves, piping, spray nozzles, label removal station and electrical panel. A test run is also included. The machine is offered with Siemens S7 PLC control and is available as a reconditioned machine at a special price. TECHNICAL DATA Manufacturer: Krones Type: KES-2-4-312/25-110 Machine Type: Bottle washing machine Year of Manufacture: 2004  Capacity: approx. 28,000 bottles/hour  Bottle Rows: 25 bottles per row Bottle Formats: approx. 300 ml up to 1,000 ml Control System: Siemens S7 PLC Heating System: Steam heating Construction: Mainly stainless steel, insulated stainless steel caustic bath Bottle Cell Pitch: 110 mm Machine Cell Material: Polypropylene Bottles per Carrier: 25 pcs Total Bottle Carriers: 274 pcs Minimum Control Range: approx. 12,000 bottles/hour Maximum Control Range: approx. 35,000 bottles/hour Electrical Supply: 400 / 230 V, 3-phase, 50 Hz Control Voltage: 24 V DC Empty Weight: approx. 45,000 kg Operating Weight: approx. 87,000 kg Machine Length: approx. 11,766 mm Machine Width without Attachments: approx. 3,136 mm Machine Height without Floor Clearance: approx. 3,200 mm Water Consumption in Operation: approx. 6.38 m³/h Water Consumption per Bottle: approx. 0.22 l Main Chain: approx. 4 years old, will be reconditioned Reconditioning Scope: Bottle infeed and outfeed, heating system, pumps, main chain, valves, piping, spray nozzles, label removal station and electrical panel Test Run incl. Delivery Terms: EXW, unpacked Bedpfxsy Ul N Hs Af Rjdc

Condition: used, Year of construction: 2025, OVERVIEW This Hermis TP-HRW 20 stainless steel tunnel pasteurizer is a new and unused machine, manufactured in 2025, designed for the pasteurization of beer in 500 ml bottles. The pasteurizer has a capacity of approx. 20,000 bottles per hour and is configured as a 10-zone tunnel pasteurizer with heating, pasteurization and cooling sections. The machine is fully made of stainless steel AISI 304 and is equipped with an external plate heat exchanger for the heating system. The process is controlled by a Siemens S7-1200 PLC with a Siemens Simatic 12" HMI touch panel, allowing automatic control of the pasteurization process. The system is designed for a product inlet temperature of approx. +4°C, a pasteurization temperature of approx. +62°C to +64°C, and an outlet temperature of approx. +34°C to +35°C. The pasteurizer provides a total treatment area of approx. 74 m², with a treatment length of approx. 13.5 m and a total machine length of approx. 15.3 m. The complete process cycle is approx. 45 minutes, achieving approx. 24 PU based on the given 500 ml beer bottle configuration. TECHNICAL DATA Manufacturer: Hermis Model: TP-HRW 20 Machine Type: Stainless steel tunnel pasteurizer Condition: New, never used Year of Manufacture: 2025 Product: Beer Container Format: 500 ml bottles Capacity: approx. 20,000 bottles/hour Treatment Area: approx. 74 m² Number of Modules: 7 pcs Total Number of Zones: 10 zones Zone Configuration: heating, pasteurization and cooling zones Treatment Length: approx. 13,500 mm Dimensions: approx. 15,300 x 5,900 x 2,200 mm Total Length incl. infeed / discharge conveyor: approx. 15,000 mm Main Construction: Stainless steel AISI 304 Heating System: Plate heat exchanger outside the pasteurizer Steam Pressure: approx. 3 bar Pasteurization Temperature: approx. +62°C to +64°C Product Inlet Temperature: approx. +4°C Product Outlet Temperature: approx. +34°C to +35°C Pasteurization Time: approx. 10–11 minutes Total Cycle Time: approx. 45 minutes Pasteurization Units: approx. 24 PU Water Consumption: approx. 2.2 – 3.0 m³/h during stable operation Water Volume in Pasteurizer: approx. 6,600 l Steam Consumption: approx. 790 kg/h during stable operation; approx. 1,250 kg / 30 min during start-up Steam Temperature: approx. +143°C at 4 bar Power Supply: 400 V AC, 3/N/PE, 50 Hz Control System: Siemens S7-1200 HMI: Siemens Simatic 12" touch panel Main Conveyor: Plastic conveyor by Movex Active Transfer: Rexnord Plate Heat Exchanger: Funke Pumps: Stainless steel pumps by Lowara Spray Nozzles: Lechler Steam Valve: Bürkert Air Supply System: SMC Level Sensors: Endress+Hauser / Negele Temperature Registration: Endress+Hauser Temperature Sensors: Negele Included Features: Automatic pasteurization control, ECO graph / data logger, stainless steel electrical cabinet, air conditioner for electrical cabinet Bjdpoy Ul Dwjfx Af Rodc

Condition: used, Year of construction: 2006, operating hours: 4,000 h, functionality: fully functional, Used wine bottling line. Complete wine bottling line comprising the following machines, all manufactured in 2006: - Filling monoblock for the used wine bottling line: * AVE brand filler, Model: OCEANIC G 24/24/6 * Filling volume: 0.75L - 2L, with a filling rate of 5000 bottles/hour * AROL type 6-head corking machine * AROL type 3-head PET capping machine - Used capsule applicator: * AVE type, 4 heads, maximum speed 6000 bottles/hour. Formats: 0.75L - 1.5L - Used labeling machine: * AVE type, 3 stations. Formats handled: 0.75L - 2L - Used glass unloader, AVE type * 16 units - Furthermore, the line includes: * Nordson type case erector, case filler, and case closer machines * S.G.E. type palletizer, manufactured in 2002/06 - AVE type 16-track bottle washing machine - Conveyor belt, approximately 60 meters long. Bsdpfjy Uiidjx Af Rsdc

Condition: used, Year of construction: 2003, machine/vehicle number: LC632, Used KRONES spirits filling line, roud glass 500 BPM - year 2003Technical Specifications & Performance DataThis complete round glass bottling line delivers high-speed performance for industrial packaging and beverage production. Built around Krones engineering, the line is configured for glass bottles in 0.7L, 0.75L, and 1.0L formats. With an output of 500–600 BPM (up to 36,000 bottles per hour), it is a robust second hand solution for producers seeking reliable throughput and consistent product quality.Production speed: 500–600 BPM (up to 36,000 bph)Filling type: vacuum filing Bottle formats: Compatible with 0.7L, 0.75L, 1.0L bottle formatsContainers: Designed for Glass bottle handlingCore components (models): Krones Variojet (72-head rinser), Krones Isofill (108-head isobaric filler), Krones Topmatic/Zalkin (18-head capper), Cold glue front & back labeling, Logics & Control Logilook label inspection (2015), Krones Kettner Wrapapac W60 (wraparound case packer), Krones/Kettner Robogrip robot, Krones Multidivider laner, Amberflex spiral case elevator, Linx 7900 bottle coder (2017), Orwak 9020 waste compactor (2006)Case formats: Wraparound boxes, 6 & 12 pack configurationsMain build year: 2003 (with upgrades in 2006, 2015, and 2017)Electrical supply: 415 V, 50 Hz (most main equipment); auxiliary devices at 240 V, 50 HzAdvanced Automation & Control SystemsThe line integrates automated material handling and inspection to ensure stable operation and quality assurance. The Krones Multidivider laner and Robogrip robotic handling enhance flow balance and downstream palletizing, while the Logilook system provides label presence and position verification. Changeovers between compatible glass formats are supported by standardized Krones change parts and adjustable guide-rails for efficient setup.Automated depalletizing, lane division, and robotic case handlingInline label inspection for consistent presentationOperator HMI terminals at key stations (typical Krones layout)Rapid format adjustments for 0.7L, 0.75L, and 1.0LStable 50 Hz operation; widely supported industrial componentsProduction Line Integration CapabilitiesThis used bottling line is designed for seamless in-line operation from bottle depalletizing to case packing. It accommodates round glass bottles and integrates labeling, coding, and inspection for end-to-end quality control. The wraparound case packer enables efficient secondary packaging for 6- and 12-pack configurations, ensuring compatibility with standard palletizing patterns.End-to-end flow: depalletizer → rinser → isobaric filler → capper → cold glue labeller → label check → coder → laner → case packer → spiral case elevator → palletizing robotSuitable for beverage production requiring glass bottle processingModular stations allow standalone testing or full inline operationMachine Condition & Maintenance HistoryManufactured in 2003 with subsequent upgrades in 2006 (waste handling), 2015 (label inspection... Bdedpfxjy Ud Ale Af Roc

Condition: used, Year of construction: 1996, machine/vehicle number: LC633, Used STORK minature line fro glass & PET 200 BPMTechnical Specifications & Performance DataThis used bottling line is engineered for miniature formats and optimized for high-efficiency beverage production. Configured specifically for 50 ml bottles, it handles both PET and Glass containers and supports multiple shapes including flask, oval, and round. The core of the line is a Stork rinser–filler–capper monoblock with a 36-head rinsing/filling carousel and a 9-head capping turret. Downstream operations include a Krones Autocol 3-station self-adhesive labeling machine for front and back labels, integrated inspection and rejection systems, and complete case packing, sealing, coding, and conveying.Production speed: 200 BPM (miniature 0.05L bottles)Filling type: vacuum filling Bottle formats: Compatible with 0.05L bottle formatContainers: Designed for PET and Glass bottle handlingSupported shapes: Flask, oval, roundMonoblock configuration: 36-head rinser/filler, 9-head capperClosures: ROPP, cap sizes 18×12 and 20×12Labeling: Krones Autocol, 3 stations, self-adhesive front and backInspection: Level control with case reject, checkweigher, scale checkEnd-of-line: Case packer, case sealer, case coder with reject, case erectorElectrical: 415 V / 50 Hz (main equipment), 240 V / 50 Hz (auxiliaries)Key model references: Logilevel HF1400, Logiweight LS, Autocol, U375, C890, 800AF-E, Spiralveyor SVManufactured by: Stork (core monoblock); major components by Krones, Garvens, Linx, 3M, Kettner, AmbaflexAdvanced Automation & Control SystemsThe line features modernized automation with a new PLC/HMI installed in 2021 on the Stork monoblock for improved diagnostics, recipe management, and process stability. Integrated inspection modules provide level control and automatic reject functionality, while the checkweigher and scale check ensure consistent fill accuracy for 50 ml packaging. Electrical distribution supports mixed voltages with 415 V / 50 Hz for primary machines and 240 V / 50 Hz for auxiliary systems. Change parts and synchronized conveyors support quick transitions among miniature flask, oval, and round formats.Production Line Integration CapabilitiesThe system is designed as a complete packaging solution from bottle infeed through case handling. Stainless-steel header tank and bottle conveyors stabilize upstream product and container flow. The Krones Autocol labeler integrates seamlessly with miniature bottle handling for precise self-adhesive label placement. Downstream, a coordinated end-of-line section provides case packing, sealing, coding with reject, case erection, and a spiral conveyor for efficient elevation and accumulation management. The line’s configuration is ideal for second hand industrial packaging upgrades or integration into existing beverage production environments focused on miniature formats.Machine Condition & Maintenance HistoryThe core monoblock and labeler date to 1996, with significant au... Bedpfsy Uduuox Af Rsdc

Condition: used, Year of construction: 2000, Overview These HERPASA self-emptying stainless steel tanks, designed as 30,000 liter autovaciante tanks, are suitable for wine production and similar beverage processing applications. The tanks are installed as a group of vertical stainless steel vessels and are equipped with bottom cone discharge systems for efficient product emptying and solids handling. The tanks are manufactured from AISI 304 / AISI 316 stainless steel and feature a 45° bottom cone, rectangular access doors, cooling jackets, temperature monitoring, product connections, and an internal mechanical extraction / rotating discharge system. The available drawings and photos show a robust industrial tank configuration with cooling surfaces, lower discharge equipment, and external piping for wine circulation or transfer. The tanks are particularly suitable for applications such as fermentation, storage, cooling, wine processing, and controlled product discharge, especially where self-emptying functionality is required. The visible installation includes at least four tanks of similar construction. Technical Data Manufacturer: HERPASA Year: 2000 Tank Type: Self-emptying vertical tank / autovaciante tank Application: Wine / beverage processing Capacity: 30,000 liters Material: Stainless steel AISI 304 / AISI 316 Tank Diameter: approx. 2,800 mm Total Height: approx. 7,050 mm Bottom Cone Angle: 45° Cooling System: Upper and lower cooling jackets Upper Cooling Jacket Surface: approx. 8.35 m² Lower Cooling Jacket Surface: approx. 4.4 m² Cooling Jacket Connections: R 3/4" water inlet / outlet Temperature Measurement: Thermometer, range 0 to +60°C Probe Connection: R 1/2" sleeve Discharge System: Bottom discharge with extraction system Internal Equipment: Rotating wine diffuser / internal extraction or sweeping mechanism Access Doors: Rectangular manways / inspection openings Connections: NW50 and NW65 product connections Safety Equipment: Safety valves 2 1/2" Installation: Group of vertical stainless steel tanks with external pipework Condition: Used, installed in industrial winery environment Bdjdpsy Uc A Rjfx Af Rjc

Condition: used, Year of construction: 2008, Overview This electronic empty bottle inspector (EBI) for returnable glass bottles was manufactured in 2008 by Germany HEUFT. The machine is designed for inspection of returnable glass bottles in beverage production lines. It is currently still installed and can be visited on request. Technical data Capacity: up to 60,000 bottles/hour (machine) / up to 54,000 bottles/hour (filler) Formats: 20 cl returnable glass bottles (Coca-Cola, multiproduct, Sprite formats) Application: Empty bottle inspection (returnable glass bottles) Configuration: Single-lane installation between bottle washer and filler Inspection technology: HEUFT reflexx inspection system Inspection systems: Base inspection (foreign body detection) Finish inspection (mouth / finish defects) Double sidewall inspection with 90° rotation Residual liquid detection (Dual High Frequency + Infrared) Detection & rejection: Detection of fallen, tilted, higher or lower bottles DELTA reject system Vision system: CCD matrix cameras 32-bit image processors Stroboscopic lighting with microprocessor control Control system: HEUFT SPECTRUM multiprocessor control Operator interface: HEUFT PILOT LCD terminal with membrane keyboard and LED counter display Construction: Stainless steel and synthetic material housing Additional features: Encoder for conveyor speed monitoring Automatic air-blow cleaning system Pre-programmed bottle formats with additional programs Bdsdpey Ucy Nefx Af Rjc

Condition: used, Year of construction: 2007, Overview This electronic empty bottle inspector (EBI) for returnable glass bottles was manufactured in 2007 by Germany HEUFT. The machine is designed for inspection of returnable glass bottles in beverage production lines. It is currently still installed and can be visited on request.  Technical data Capacity: up to 60,000 bottles/hour (machine) / up to 54,000 bottles/hour (filler) Formats: 20 cl returnable glass bottles Application: Empty bottle inspection (returnable glass bottles) Configuration: Single-lane installation between bottle washer and filler Inspection technology: HEUFT reflexx inspection system Inspection systems: Base inspection (foreign body detection) Finish inspection (mouth / finish defects) Double sidewall inspection with 90° rotation Residual liquid detection (Dual High Frequency + Infrared) Detection & rejection: Detection of fallen, tilted, higher or lower bottles DELTA reject system Vision system: CCD matrix cameras 32-bit image processors Stroboscopic lighting with microprocessor control Control system: HEUFT SPECTRUM multiprocessor control Operator interface: HEUFT PILOT LCD terminal with membrane keyboard and LED counter display Construction: Stainless steel and synthetic material housing Additional features: Encoder for conveyor speed monitoring Automatic air-blow cleaning system Pre-programmed bottle formats with additional programs Bedpey Ucyvjfx Af Redc