Usedfishmachines

Condition: used,

Condition: used, Year of construction: 2007, functionality: fully functional, FLEXICON FILLING AND CAPPING MACHINE, MODEL FPC 50 Highly flexible sterile filling machine. With integrated capping (either complete or partial) and a roller or crimping option for bottle capping. For the production of small batches of bottles. Built in 2007. CHARACTERISTICS - can be used under a laminar air flow or restricted access barrier system - every five minutes the operator can carry out a complete production changeover between different liquids, vials or caps, without technical support from outside the clean room PRODUCTION - Output: up to 25 vials/min - Bottles size: from 2R to 100H - Caps size: 13 mm and 20 mm - Stoppers size: 13 mm and 20 mm Nlodpfxexzunpo Ah Dji - Accuracy: + / - 0.5 % (>1ml) - Filling: 0.1 ml to 100 ll

Condition: good (used), Drawer shelving, workshop drawer unit, tool cabinet – 10 drawers – large format, approximately 116 x 101 cm inside the drawer Nedpfx Asxzunceh Doli – each drawer has its own bearing. Made in Germany

Condition: good (used), Rilecart PB-796 HD Automatic Spiral Binding Machine A powerful machine for the production of calendars, notebooks, and other metal spiral-bound products. The machine automatically perforates, feeds the spiral, cuts the spiral into pre-defined lengths, inserts the hanger, and clamps the binding. Max. feeder size: 600 x 700mm Min. feeder size: 120 x 100mm Max. thickness: 4.5mm Table with folded sheet feeder Die-cutting module for wire binding Nlodjxzum Sopfx Ah Dji Die-cutting module for hanger Automatic hanger loading and mounting Automatic wire feed from the roll with wire spacer removal Closing module Delivery Central controller for the entire device Capacity up to 2300 cycles/h 380V power supply + compressed air The machine has a central lubrication system. Weight: 2200 kg The kit includes many additional components, tools, and documentation.

Condition: used, Year of construction: 2001, functionality: fully functional, OLI CASE PACKER, MODEL OLI 210/OLIMAT 2P Small automatic case packer with small footprint. Built in 2001, with full documentation. Composed of 2 modules: OLI 210 (for products in feeding, staking and introduction) and OLIMAT 2P (for case-shaping, closing and out feeding). CHARACTERISTICS - PLC: TSX - Panel command : MAGELIS - Incoterm: EXW PRODUCTION - Max speed: 20 cases/mn (160 cartons/mn) - Cases format range: 100 x 60 x 100 mm (min); 500 x 340 x 400 mm (max) - Product entry height: 900 mm - Product exit height: 1100 mm DIMENSIONS - Size: 4700 x 1600 x 2000 mm (approximately) ENERGY CONSUMPTION Nljdpexzum Eefx Ah Doi - Power: 5 KVA, 3 x 400 V/N/PE - Operating pressure: 6 bar

Condition: good (used), Polar Mohr 115 XT Paper Cutting Guillotine This machine is in very good condition, ready for production, after a service inspection. Low mileage. Year of manufacture: 2010. This is the most valued guillotine brand, a flagship product. A jogging and elevator are available for retrofitting. Technical specifications: Cutting width: 1150mm Stack height: 165mm Programmer with a 15″ color touchscreen display Air table Photocells Chrome table surface Njdpfexzumxjx Ah Deli Ball screw drive for the rear comb Optical cutting line Enlarged side tables Knife change via the control panel Additional rear table guards Weight: 3200kg 380V power supply Includes documentation, a tool kit, a tapping block, a spare knife, and one knife in the machine.

Condition: good (used), Polar Mohr 56 ECO Guillotine Manufactured in 2013. The machine is ready for production, after a service. Mohr Polar is the most recognizable and highly valued brand of bookbinding guillotines in the world. Made in Germany. Working width: 560mm Stack height: 80mm Njdpfxsxzumro Ah Djli Machine weight: 575kg Power supply: 230V Equipment: Programmer with a 5.5″ display and the ability to save 198 programs Chrome-plated table Photocells Intuitive operation Documentation, tools, spare knife, and cutting sticks.

Condition: excellent (used), mileage: 868,351 km, power: 331 kW (450.03 HP), first registration: 01/2018, fuel type: diesel, tire size: 385/65, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, brakes: retarder, gearing type: automatic, number of gears: 16, emission class: euro6, suspension: air, total length: 5,960 mm, total width: 2,550 mm, Year of construction: 2018, Equipment: retarder, Full options Two tanks Parking cooler = Further information = Technical information Number of cylinders: 6 Engine displacement: 12,742 cc Transmission Gearbox: Opticruise, 16-speed, automatic Axle configuration Suspension: Air suspension Front axle: Tire size: 385/65; Max. axle load: 7,500 kg; Left tire tread: 65%; Right tire tread: 65% Rear axle: Tire size: 315/70; Twin tires; Max. axle load: 11,500 kg; Left inner tire tread: 35%; Left outer tire tread: 35%; Right inner tire tread: 35%; Right outer tire tread: 35% Weights Unladen weight: 8,519 kg Payload: 10,481 kg Gross vehicle weight: 19,000 kg Nledpfx Aoxzumljh Doi Functional Body manufacturer: Scania Maintenance, history and condition APK (periodic technical inspection): valid until 10/2026 Technical condition: very good Optical condition: very good Further information Please contact Maarten Busser or Niels Busser for further information.

Condition: good (used), Polar Mohr 92XT Paper Cutting Guillotine This machine is in very good condition, ready for production, and has been serviced. This is the most highly regarded guillotine brand, a flagship product. Manufactured in 2009. Technical specifications: Cutting width: 920mm Stack height: 130mm Programmer with 15″ color touchscreen display Air table Photocells Nlodpfx Ajxzumfsh Dei Chrome table surface Ball screw drive for the rear comb Optical cutting line Enlarged side tables Knife change via the control panel Weight: 2000kg 380V power supply Includes documentation, a tool kit, a tapping block, a spare knife, and one knife in the machine.

Condition: good (used), Polar Mohr 115 EMC Paper Cutting Guillotine Njdpjxzul Uefx Ah Djli The machine is fully operational. Inspected and ready to use. Technical specifications: Cutting width: 1150mm Stack height: 165mm Programmer Air table Photocells Side tables Additional rear table guards Weight: 3200kg 380V power supply Tool kit, safety knife change tool, tapping block, spare knife, and one in the machine.

Condition: good (used), ML-800 NXL Die-Cutting Machine This machine is used to cut shapes from a mold (die) from materials such as paper, cardboard, leather, plastics, etc. The machine is in perfect condition, manufactured in 2018. First installed in 2020. This is the heaviest die-cutting machine in this format, precise. Format: 830 x 560 mm Weight: 2500 kg Power supply: 380 V Motor: 2.5 kW Equipment: – Electromagnetic clutch and brake – Quick-mount frame – 3 operating modes: continuous, time-delayed, and manual – Centralized pressure lubrication – Additional safety guards – Operating tools and instructions with CE documentation. Nedpfxsxzul Io Ah Doli

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. Nljdpfjxzulzox Ah Dji The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: good (used), Kama TS 74-60 Automatic Die Cutter One of the rarest models on the market. Manufactured in 2006, with a run of only 43 million sheets. Nlodpfx Ahexzulus Dsi Machine serviced and maintained on time. Format: 540x740mm Fully automatic, smooth speed control, central lubrication, and safety guards. Includes two frames, several hard sheets for clamping, trolleys, a tool kit, and documentation.

Condition: excellent (used), Year of construction: 2018, Technical data: Operating voltage: 400V AC Maximum circuit breaker: 16A Frequency: 50/60Hz Electrical connected load: 3.4kW Temperature range: +5°C above ambient temperature up to 300°C Spatial temperature deviation at 150°C: ± 3.8K Temporal temperature deviation at 150°C: ± 0.7K Heating-up time to 150°C: 29min Recovery time after 30 s door opening at 150°C: 6min Air exchange rate at 150°C: 18x/h Interior volume: 400l Maximum load per shelf: 35kg Maximum total load: 90kg Energy consumption at 150°C: 1,200Wh/h Maximum number of shelves: 10 External dimensions: Width: 1,235mm Height: 1,025mm Depth: 765mm Internal dimensions: Width: 1,000mm Height: 800mm Nljdpfx Asxzulnoh Dsi Depth: 510mm

Condition: good (used), Polar Mohr LW 1000-4 Paper Stack Lift This device is in excellent technical and visual condition. This is the current production model. Hydraulic drive. 380V power supply. Automatic lifting cycle controlled by a photocell or manual mode, fast operation. Load capacity: 1000 kg. Nlsdpfxoxzulho Ah Dji Pallet dimensions: 1200 x 800 cm

Condition: used, AJIAL CNC 2312 PUNCHING MACHINE (2517) Liquidation by auction due to cessation of activity and definitive closure of a second-hand industrial machinery tool company Brand: AJIAL Model: CNC 2312 Punching force: 23 T Max. sheet weight: 55 kg Max. sheet thickness: 6 mm Max. punch diameter: 90 mm Max. punching distance: 90 mm X axis: 1000 mm Y axis: 1250 mm Max. positioning speed X axis: 60 m/min Y axis: 60 m/min X-Y axes: 84 m/min Positioning accuracy X axis: 0.15 mm Njdpfx Ahexzulbj Djli Y axis: 0.15 mm Punching speed (Nibbling) max.: 350 strokes/min Cutout: 1050 mm Punching head: Hydraulic-Ajial Hydraulic motor power: 18 kW X-axis motor power: 1.5 kW (2 hp) Y-axis motor power: 3 kW (4 hp) Turret motor power: 0.18 kW (0.25 hp)

Condition: good (used), Toppy Maxi PH WB Mobile Pile Turner Nlodjxzuk Repfx Ah Dji Fully operational and ready to use. Manufactured in 2008. Technical specifications: Format: 1200 x 1200 mm Stack height: 1800 mm Load capacity: 1500 kg Device weight: 1700 kg Battery charger included. Battery in like-new condition. Control panel, fast operation, hydraulic drive. Quiet operation. Compact design, space-saving.

Condition: good (used), Baumann BSW3-1000 Automatic Pile Turner Functional, ready for operation, after inspection. The most equipped turner offered by the German manufacturer Baumann Wohlenberg. Nledpoxzuk Defx Ah Dji Technical specifications: Format: 1200 x 850 mm Plate format: 1350 x 850 mm Stack height: 1350 mm Load capacity: 1000 kg Device weight: 2800 kg 380V power supply Control panel, fast operation, hydraulic drive. Aeration + shaking Quiet operation. Fully automatic operation. Includes documentation and a complete safety fence with photocells.

Condition: used, mileage: 674,764 km, power: 353 kW (479.95 HP), first registration: 01/2019, overall weight: 26,000 kg, fuel type: diesel, color: blue, axle configuration: 6x2, maximum load weight: 15,010 kg, empty load weight: 10,990 kg, brakes: engine braking, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, loading space volume: 49 m³, loading space width: 2,490 mm, loading space length: 7,630 mm, loading space height: 2,580 mm, number of seats: 2, number of beds: 1, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, electronic stability program (ESP), onboard computer, parking heater, soot filter, tail-lift, traction control, trailer coupling, Mercedes-Benz Actros Box Truck 2548 E6 - Box body - Sleeper cab - Dimensions: 7.36 x 2.49 x 2.58 m - Automatic transmission - Active cruise control - ABS/ASR/ESP Nljdpfx Ahexzukwe Dsi - Lane assist - Air conditioning - Auxiliary heater - Air suspension - Cab with 2 bunks - EURO 6 - Payload: 15,010 kg - Trailer coupling - Tyres: 315/70 R22.5

Condition: new, Year of construction: 2025, Pile Driver YCR260 Nedpjxzukqofx Ah Djli

Condition: excellent (used), Year of construction: 2018, Technical data: Operating voltage: 400V AC Maximum pre-fuse: 16A Frequency: 50/60Hz Electrical connected load: 4.5kW Temperature range: +12°C above ambient temperature up to 300°C Spatial temperature deviation at 150 °C: ± 2.0K Temporal temperature deviation at 150 °C: ± 0.6K Heat-up time to 150 °C: 25 minutes Recovery time after 30 s door opening at 150 °C: 6 minutes Air exchange rate at 100 °C: 5x/h Internal volume: 741 l Maximum load per shelf: 45 kg Maximum total load: 315 kg Energy consumption at 150 °C: 800 Wh/h Max. number of shelves: 16 External dimensions: Width: 1,235 mm Height: 1,025 mm Depth: 765 mm Internal dimensions: Width: 1,000 mm Nodpfx Ahoxzukko Dsli Height: 800 mm Depth: 510 mm

Condition: used, Pneumatic Clutch Press Belt Model BREN 160 TN (1323) Liquidation by auction due to end of activity and definitive closure of a used industrial machinery tools company Brand: BELT Model: BREN 160 Frame type: Gooseneck Number of guides: 2 Main Technical Features Nominal force: 160 tons Stroke: 20 – 160 mm Strokes per minute: 42 Table height to slide: 660 mm Ball elongation: 90 mm Nsdpfx Ajxzui Toh Doli Adjustable stroke: Yes Engine power: 12 hp (≈ 8.8 kW) Dimensions Table: 1250 × 610 mm Slide: 850 × 500 mm Table hole: 350 × 350 mm Gooseneck depth: 320 mm Opening between uprights: 395 mm Distance from table to floor: 850 mm

Condition: used, mileage: 905,485 km, power: 368 kW (500.34 HP), first registration: 12/2018, fuel type: diesel, overall weight: 19,000 kg, tire size: 385/65R22,5, axle configuration: 4x2, brakes: retarder, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, front tire size: 385/65R22,5, rear tire size: 315/70R22,5, number of seats: 2, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, electronic stability program (ESP), navigation system, onboard computer, parking heater, soot filter, traction control, Yourtrucks Group The Yourtrucks Group maintains business relationships worldwide. Both purchasing and sales extend across national borders, which is why our advertisements generally show the export price, as this is independent of the place of use. Yourtrucks GmbH compiles the content of this website with the greatest care and ensures that it is regularly updated. This information is intended as non-binding, general information and does not replace detailed, individual advice when making a purchase decision. Only the provisions included in the purchase contract are binding. Subject to change, error, misprints, and prior sale. Our general terms and conditions apply exclusively. Nsdpfx Asxzui Hjh Dsli

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Precision winding machine for films and web materials. Designed for consistent unwinding, guiding, and rewinding of roll materials. Integrated safety system with protective glazing, laser start position indicator (green), emergency stop switches, and pneumatic film guiding. Machine frame made of steel, electrically controlled drive. Ideal for production lines in coating or laminating technology. Nledpfxoxzuiye Ah Dji

Condition: used, Year of construction: 2006, functionality: fully functional, MW TECHNOLOGIES BENCH TOP INSPECTION SYSTEM, MODEL MIH-DX Year of construction: 2006 Small machine optimized for small workstations, laboratories or production lines. For the inspection of vials, ampoules and other components for particulate particles. Suitable for integration in GMP-controlled environment; the stainless construction and enclosed hood facilitate cleanliness and inspection tasks. As the unit is rated 115 V/60 Hz, for operation in Europe (230 V/50 Hz) adapter or transformer may be required unless internal wiring has been converted. 7 units of this machine are available. CHARACTERISTICS - Enclosed hood with viewing window and adjustable lighting system - Stainless-steel construction, robust and easy to clean - Controls on front panel: power switch, lighting selector, intensity dial - Lighting: On/off selection, intensity adjustment knob (as visible in photo) ENERGY CONSUMPTION - Voltage: 115 V AC (standard US mains) - Phase: single phase (1 PH) - Current: 5 A - Frequency: 60 Hz Njdpfxjxzuite Ah Deli