Kop.Frut Diber 2012

Condition: used, mileage: 838,069 km, power: 355 kW (482.67 HP), first registration: 11/2017, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, fuel tank capacity: 1,195 l, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2017, Equipment: differential lock, fridge, second fuel tank, traction control, = Additional Options and Accessories = - Aluminum fuel tank - Differential lock - Air suspension - Parabolic suspension - Sleeper cab - Sun visor = Additional Information = Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Pgsdpfjzhng Sox Ap Esn Transmission Gearbox: TRAXON, 12 gears, automatic Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/55R22.5; Max. axle load: 8000 kg; Steered; Suspension: Parabolic suspension Rear axle: Tire size: 315/70R22.5; Dual tires; Max. axle load: 11500 kg; Reduction: single reduction; Suspension: Air suspension Weights Unladen weight: 8,201 kg Payload: 9,799 kg GVWR: 18,000 kg Maintenance APK (Technical Inspection): valid until 03/2027 Identification License plate: 35-BRP-6 Additional Information Please contact Maurits Van Giessen for more information.

Condition: used, Year of construction: 2008, VAT/margin: VAT qualifying Pgjdozhng Eopfx Ap Ejn

Condition: ready for operation (used), Year of construction: 2009, operating hours: 36,000 h, total height: 1,900 mm, overall weight: 2,700 kg, This KASTO KASTOflex F Circular Metal Saw was manufactured in 2009. It features a weight of 2700 kg, operates on 400 V, and includes an automatic feed, residue bunker, and coolant device. It supports mitre cuts and has a loading station with a 20-compartment chain magazine. The discharge side boasts a 5 m long apron conveyor with programmable discharge stations. Consider the opportunity to buy this KASTO KASTOflex F Circular Metal Saw. Contact us for more information. Additional equipment • Voltage: 400 V • With automatic feed • Residue bunker • Coolant device • Mitre cut • Loading station, chain magazine with 20 compartments on the infeed side Pgsdpszhngxsfx Ap Eon • Discharge sorting station, discharge side with 5 m long apron conveyor and programmable discharge stations on both sides • Minimum quantity lubrication • including 2x shelfs from Kasto Extra Information Shelves included Cutting ranges: 04/08 with saw blade 450 mm diameter Round Flat (W x H) Square (W x H) Cutting range 90° @ 150 200 × 100 140 x 140 mm Cutting range 45° x 80 × mm Cutting range 60° × 60 100 × 100 mm Minimum material height for flat material 8 mm Remnant length in automatic cycle at 90° 35 mm Remnant length in automatic cycle at 45° 95 mm Material support height 1,050 mm Features: Total connected load 8 kW Connected load coolant pump 0.1 kW Frequency-controlled drive (optional) 4 kW Cutting speed continuously variable 10 - 60 m/min Direct dimension input up to 9,999 mm Max. permissible material curvature 12 mm/6 m Feed length in one stroke at 90° 2,030 mm Feed length in one stroke at 45° approx. 1,970 mm Saw feed speed 16 - 520 mm/min Saw blade rapid return 2,000 mm/min Material feed speed 0 - 20 m/min Max. clamping force of material feed vise 12,500 N Max. clamping force of vertical vise 25,000 N Clamping force Reducible (option) Saw blade diameter, special flange Mounting hole according to DIN 8576 350 mm 40/4 x 11/63 mm Saw blade diameter Mounting hole according to DIN 8576 with intermediate ring 400, 450 mm 50/4 x 14/80 mmMachine also available without the shelving system. Dimensions Machine Depth 4800 mm

Condition: reconditioned (used), Year of construction: 2017, operating hours: 1,380 h, functionality: fully functional, working width: 650 mm, area performance: 3,500 m²/h, overall weight: 447 kg, warranty duration: 12 months, water tank capacity: 75 l, HAKO SCRUBMASTER B75 R TB650 SCRUBBER NEW 6V 175Ah SIAP GEL BATTERIES (4x) Manufactured in 2017 with 1,380 hours on the clock 650mm cleaning head (TB650) equipped with new medium-hard disc brushes for use on any surface. Podpfx Apszhnf Ue Eogn New polyurethane squeegee rubbers, resistant to oil, grease, and petroleum products. A new rubber guard around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 650 Suction nozzle working width (mm): 860 Working speed (km/h): 5.5 Tank capacity (l): 75/75 Number of brushes (pcs): 2 Brush speed (rpm): 180 Efficiency (m²/h): 3500 Gradeability (%): 10 Weight (kg): 447 W INCLUDED IN THE KIT: NEW 6V 175Ah SIAP GEL BATTERIES (4x) NEW 24V 600W suction turbine NEW 330mm PPL 0.5 disc brushes (2x) NEW drain hose NEW suction hose NEW head guard rubber Built-in battery charger Squeegee blade with new oil-resistant rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 75-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned. The large working width (650 mm) ensures high surface coverage. The control panel is very clear and intuitive to use.

Condition: used, mileage: 530,113 km, power: 355 kW (482.67 HP), first registration: 11/2017, fuel type: diesel, tire size: 315/60R22,5, axle configuration: 6x2, wheelbase: 3,950 mm, fuel: diesel, fuel tank capacity: 430 l, brakes: intarder, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 7,500 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2017, Equipment: fridge, spoiler, traction control, = Additional Options and Accessories = - Aluminum fuel tank - Roof spoiler - Air suspension - Parabolic suspension - Sleeper cab - Sun visor Pgsdpfx Aszhnf Ijp Ejn = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Transmission Transmission: TRAXON, 12 gears, automatic Axle Configuration Tire size: 315/60R22.5 Front axle: Max. axle load: 7500 kg; Steered; Brakes: Disc brakes; Suspension: Parabolic suspension Rear axle 1: Lift axle; Max. axle load: 7500 kg Rear axle 2: Double tires; Max. axle load: 11500 kg; Reduction: single reduction; Brakes: Disc brakes; Suspension: Air suspension Weights Unladen weight: 8,783 kg Payload: 17,717 kg GVW: 26,500 kg Maintenance APK (technical inspection): valid until 09/2026 Identification License plate: 09-BTD-1 Further Information Please contact Maurits Van Giessen for more information.

Year of construction: 2009, condition: ready for operation (used), Coating line manufactured in 2009. This CEFLA EASY 2000 D features an infeed conveyor table with photocells, a dust removal brushing machine, and a spray booth with two automatic spray arms equipped with six spray guns each. It also includes a three-chamber drying oven and an air heat recovery unit. If you are looking to get high-quality coating capabilities, consider the CEFLA EASY 2000 D machine we have for sale. Contact us for further details. • Line components: • Infeed conveyor table with photocells • Dust removal brushing machine • Spray booth with two automatic spray arms (six spray guns per arm) • Steel belt conveyor for excess paint collection Pgsdpfezhnfzsx Ap Esn • Automatic transfer conveyor to the drying oven • Three-chamber drying oven • Outfeed conveyor from the oven Additional equipment • Air heat recovery unit (recuperator) • Exhaust stack for volatile substances • Dust extraction system for the infeed table

Condition: ready for operation (used), shelf length: 3000 mm Pgodpfx Aozhnfujp Ejn shelf width: 1300 mm 6 hydraulic cylinders safety switch – shear pin press without heating – cold press

Condition: used, mileage: 619,357 km, power: 338 kW (459.55 HP), first registration: 07/2018, fuel type: diesel, empty load weight: 11,150 kg, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 01/2027, brakes: retarder, color: blue, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, onboard computer, trailer coupling, Manufacturer: MAN - Type/Model: TGS 26.460 6x2 - First registration: 07/02/2018 - Mileage: 619,357 km - Number of axles: 3 - Emission class: Euro 6 - Cab: M - Transmission: Automatic - Auxiliary brake: Retarder - Suspension: Air suspension - Lift axle - Steerable axle - Axle type: MAN - Brakes: Disc brakes - Length: 8990 mm - Width: 2550 mm - Height: 3370 mm - Unladen weight: 11,150 kg - Next MOT due: 01/2027 Pgjdpfezhnfhjx Ap Ejn

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 066 404 601, An extrusion tool for the production of PE or PP pipes is offered. Psdpfx Ajzhnd Rop Eogn Pipe diameter range min: Ø140 mm Pipe diameter range max: Ø250 mm Output approx.: 1000 kg/h Design: Spiral distributor system, completely made of 42CrMo4 Flow contour polished Equipped with cylinder heaters and temperature sensors M14x1.5, type “J” Incl. 3 m connection cable, without plug connector for the extruder Technical data: 230V, 50Hz for max. 3600W per zone, 16A Number of heating zones: 7 2 copies of the operating manual in German or English are included in the scope of delivery. The offer includes the following items: - Base tool PO G 250 - Covering package for a max. 10% outer layer - Flex die insert for Ø250/180 - with this die insert, all dimensions from Ø250 to Ø180 can be produced in SDR17 + SDR11 - Tool mounting carriage, swiveling by 90° - Internal cooling for oil or water in the spiral distributor - Prepared for the installation of a pipe head air cooling system

Condition: used, mileage: 78,600 km, power: 88 kW (119.65 HP), first registration: 04/2023, fuel type: diesel, overall weight: 2,695 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Dear customers, please schedule an appointment with us. Our vehicles are readily available for viewing. We are available by phone from 8:00 a.m. to 6:00 p.m. Email inquiries will generally be answered promptly. Team Auto-Schiller Fiat Scudo L 2 SX 150 Multijet van, one previous owner, wooden floor in the cargo area with anti-slip profile and cargo area protection for the sides and wheel arches, infotainment system: 7-inch touchscreen with navigation and rearview camera, 3 seats, etc., affordable financing through our partner bank, nationwide delivery possible upon request. Special equipment: Wooden floor in the cargo area with anti-slip profile and side paneling (wood) with wheel arch covers, full-size spare wheel, seats in the cab: double passenger seat with storage/tray compartment (mobile office) Additional equipment: Pjdpezhnd Djfx Ap Eegn Airbag driver/passenger side, audio controls on the steering wheel, exterior mirrors electrically adjustable and heated, both, driver assistance system: brake assist, rear wing doors without glazing, infotainment system: 7" touchscreen with navigation, body/structure: panel van, cargo area partition, steering wheel with multifunction buttons for audio controls, engine 1.5 L - 88 kW Multijet CAT, parking brake electric, wheel hub covers black 16", wheelbase 3275 mm, tire repair kit, low emissions according to Euro 6d emission standard, start/stop system, solid color paint.

Condition: used, mileage: 78,600 km, power: 88 kW (119.65 HP), first registration: 04/2023, fuel type: diesel, overall weight: 2,695 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Dear customers, please schedule an appointment with us. Our vehicles are readily available for viewing. We are available by phone from 8:00 AM to 6:00 PM. Email inquiries will generally be answered promptly. Team Auto-Schiller Fiat Scudo L 2 SX 150 Multijet transporter, one previous owner, wooden floor in the cargo area with an anti-slip profile and cargo area protection for the sides and wheel arches, infotainment system: 7-inch touchscreen with navigation and rearview camera, 3 seats, etc., favorable financing possible through our in-house bank, nationwide delivery possible upon agreement. Special equipment: Wooden floor in the cargo area with anti-slip profile and side paneling (wood) with wheel arch trim, full-size spare wheel, seats in the driver's cab: double passenger seat with storage/compartment (mobile office). Additional equipment: Pgsdpfxezhndwo Ap Esn Airbag driver/passenger side, audio controls on the steering wheel, exterior mirrors electrically adjustable and heated, both, driver assistance system: brake assist, rear wing doors without glazing, infotainment system: 7" touchscreen with navigation, body/structure: panel van, cargo area partition, steering wheel with multifunction controls for audio operation, engine 1.5 L - 88 kW Multijet catalytic converter, parking brake electric, wheel hub covers black 16", wheelbase 3275 mm, tire repair kit, low emissions according to emission standard Euro 6d, start/stop system, solid color paint.

Condition: used, Year of construction: 2001, functionality: fully functional, Plate shear, manufacturer Peddinghaus Caddy 63 Year of manufacture: 2001 Pedszhndqopfx Ap Esgn Completely overhauled in 2011 Shearing force: 2000 kN Stroke rate, max.: 48/min. (the achievable number of pieces depends on the part length and the equipment of the system) Shearing diameter: 63 mm Material strength: 450 N/mm² Control system: S7-300 Operator panel: MP 277 Touch 8" Weight: approx. 7.9 tons.

Condition: repair required (used), Year of construction: 2008, functionality: not functional, operating hours: 20,000 h, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 850 mm, cutting width (max.): 1,000 mm, rotational speed (max.): 80 rpm, rotational speed (min.): 15 rpm, total height: 3,200 mm, total length: 5,700 mm, total width: 3,900 mm, overall weight: 20,000 kg, table height: 800 mm, year of last overhaul: 2021, Equipment: CE marking, rotational speed infinitely variable, PEGAS 850×1000 GOLEM 2M – Heavy-Duty Double Column Band Saw for Custom Rebuild The PEGAS 850×1000 GOLEM 2M is an extra heavy-duty double column band saw designed for cutting large steel sections, plates and profiles. This machine is offered as a base machine for individual rebuilding or modernization, making it an excellent project for companies wishing to install their own control system, drives and automation. A comparable new PEGAS-GONDA 850×1000 GOLEM machine is currently offered at approximately EUR 250,000, providing an excellent opportunity to build a high-capacity industrial saw at a significantly lower investment. Machine Status Base machine for custom rebuild Mechanical structure in good condition Without electrical installation Pjdpszhndksfx Ap Eegn Without drive motors and control system Ideal for retrofit, CNC conversion or special applications Main Features Heavy-duty double column construction Cutting capacity: 850 × 1000 mm Large 1 × 2 m work table Horizontal and vertical cutting capability Rigid industrial frame Designed for heavy steel fabrication and oversized workpieces Year of manufacture: 2008 Suitable for Steel fabrication companies Machine rebuild specialists OEM projects Heavy engineering Custom automation and retrofit applications This machine provides a robust mechanical platform for building a high-performance industrial band saw tailored to individual production requirements. Its massive construction and large cutting capacity make it an excellent alternative to purchasing a new machine.

Condition: used, functionality: fully functional, machine/vehicle number: 021945036, Rohde & Schwarz HM8118 LCR meter, 100 mF, 100 MΩ, 100,000 H, benchtop unit, LCD display. Dimensions: 365 x 285 x 75 mm, weight 4 kg, height 75 mm, length 365 mm. Pgodpfx Apozhnddj Een

Condition: good (used), Year of construction: 2014, operating hours: 2,037 h, axle configuration: 4x4, fuel type: diesel, color: other, Equipment: all wheel drive, Drive: Wheel GVW: 6.480 kg Dimensions (LxBxH): 657 x 235 x 227 cm Pjdpfxezhnc Tj Ap Eegn Make of engine: Deutz Mast: articulated arm Lifting capacity: 250 kg Working height: 1.572 cm CE mark: yes JLG 450AJ Year of construction: 2014 Hours: 2037 h Engine: Deutz Diesel Weight: 6480 kg Working height: 15.7 m Lateral reach: 7.6 m Lifting capacity: 250 kg Drive: 4X4 CE certified Generator

Condition: used, mileage: 402,632 km, power: 375 kW (509.86 HP), first registration: 08/2023, fuel type: diesel, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking heater, soot filter, | Volvo FH 500 | XXL cab - Globetrotter | Lane keeping assist, cruise control, sunroof, collision warning system | EURO6, I-Save, VEB | Refrigerator, auxiliary air conditioning | Hands-free system, multifunction steering wheel | Auxiliary heater, heated seats | Electric windows, electrically adjustable and heated mirrors | Radio | Errors, typos, and prior sale are subject to change. Wienerherberg, Austria. Pgedpfx Aszhncgjp Ejn

Condition: used, empty load weight: 2,380 kg, maximum load weight: 7,620 kg, overall weight: 10,000 kg, axle configuration: 1 axle, first registration: 06/2020, suspension: air, tire size: 295/65 R22,5, Equipment: ABS, | H&W 1-axle trailer | SAF axle with disc brakes | Tool box | Gross vehicle weight: 10,000 kg | Payload: 7,620 kg | Twin tires | Tires: 295/80 R22.5 | Subject to errors, typos and prior sale. Pgjdezhncaopfx Ap Ejn

Condition: used, empty load weight: 2,380 kg, maximum load weight: 7,620 kg, overall weight: 10,000 kg, axle configuration: 1 axle, first registration: 07/2019, suspension: air, tire size: 295/80 R22,5, Equipment: ABS, | H&W 1-axle trailer | SAF axle with disc brakes | Total weight: 10,000 kg | Payload: 7,620 kg | Twin tires | Tires: 295/80 R22.5 | Errors, typos and prior sale excepted. Pgodpjzhnb Nsfx Ap Esn

Condition: ready for operation (used), Year of construction: 2003, spindle speed (max.): 12,000 rpm, travel distance X-axis: 505 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 2,040 mm, controller manufacturer: OKUMA, controller model: OSP-U100L, number of slots in tool magazine: 44, number of axes: 6, This 6-axis Okuma MacTurn350-W was manufactured in 2003. It features a Z-axis travel of 1900 mm and a spindle speed of 12,000 RPM. The machine is equipped with an automatic tool changer that holds 44 tools and is ready for robotic integration. If you are looking to get high-quality turning and milling capabilities, consider the Okuma MacTurn350-W turn-mill centre we have for sale. Contact us for further details. • Y-axis: yes • Through-spindle coolant (water) • Lower turret: no live tooling • Simultaneous machining: not available • Auto door • Robot interface: ready Additional equipment • SMW chucks: 10" and 8" to be supplied • Note: chucks currently installed on the machine are not included Technical Specification Counter Spindle Yes Driven Tools No Taper Size HSK 63 Through-spindle Coolant Yes Pgedpfxezhnb As Ap Esn

Condition: like new (used), Year of construction: 2025, functionality: fully functional, grinding width: 550 mm, grinding height: 580 mm, distance table to spindle center: 680 mm, table load: 1,000 kg, table width: 800 mm, grinding wheel width: 57 mm, spindle speed (max.): 1,500 rpm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, CNC Rotary Table Surface Grinding Machine ROSA ERMANDO CNC 800 – LIKE NEW (2024) For sale is a state-of-the-art CNC rotary table surface grinding machine, ROSA ERMANDO CNC 800, manufactured in 2024 and in like-new condition. The machine comes from an industrial application (Syntegon) and has been used very little. It will be available and ready for operation from January 2024. Thanks to the Siemens Sinumerik ONE control system and the extensive equipment, the system is ideally suited for precise grinding operations in tool, mold, and machine manufacturing. ⚙️ Technical Data Manufacturer: ROSA ERMANDO Type: CNC 800 Year of Manufacture: 2024 Control System: Siemens Sinumerik ONE (Rosa System 9 Touch) Axes: 3 Travel: X: 550 mm Y: 680 mm Grinding Wheel: 400 x 57 x 127 mm Spindle Power: 11 kW Max. Speed: 1500 rpm Spindle Condition: new 🧰 Equipment / Accessories ✅ Electro-permanent magnetic chuck Ø 800 mm ✅ Adjustable magnetic force (20–100%) ✅ Demagnetization device ✅ Coolant system with band filter (100 l/min, 350 l tank) Podjzhnbpspfx Ap Esgn ✅ Additional grinding wheel flanges ✅ Teleservice / Remote diagnostics ✅ CE marking Important Conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany or the EU • Inclusion of a dual-use statement in the purchase contract (legally required) Sales / Transfer Conditions: • Dismantling, removal, and transport are the responsibility of the buyer and at their own risk. • The buyer is responsible for providing personnel, tools, and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used. If you are interested, we look forward to hearing from you so that we can coordinate the further details directly.

Condition: excellent (used), mileage: 370,855 km, power: 55 kW (74.78 HP), first registration: 08/2015, fuel type: diesel, fuel: diesel, color: white, gearing type: mechanical, number of seats: 2, Year of construction: 2015, BELGIAN REGISTRATION Pjdpszhnbiofx Ap Eegn DRIVES VERY WELL = Further Information = Engine displacement: 1,598 cc Unladen weight: 1,358 kg Payload: 801 kg Gross vehicle weight: 2,159 kg Technical condition: very good Optical condition: very good Please contact Thierry Leemans for further information.

Condition: good (used), functionality: fully functional, Year of construction: 2011, load capacity: 7,000 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: duplex, construction height: 3,300 mm, gearing type: automatic, fork length: 1,800 mm, empty load weight: 10,280 kg, total height: 3,300 mm, Equipment: pallet forks, sideshift, MACHINE: Forklift BRAND: Hyundai Podpfx Aezhna Ssp Eogn MODEL: 70D-7E YEAR OF MANUFACTURE: 2011 ENGINE: Diesel TRANSMISSION: Automatic MAST: 2-stage ATTACHMENT: Side shift and fork positioner LIFT CAPACITY: 7000 kg LIFTING HEIGHT: 4700 mm TRANSPORT HEIGHT: 3300 mm HYDRAULIC VALVES: 4 FORKS: 1800 mm TIRE TYPE: Solid, standard CONDITION: Normal

Condition: good (used), Year of construction: 2008, Log Stacker Year 2008 Description -straight infeed -infeed belt -reject unit -pressing station Pebn N Uszhnaxef N Ejgn -turnoverbelt -delivery to right Pedpfx Aszhnaxsp Eogn

Condition: used, mileage: 382,000 km, first registration: 06/2018, fuel type: diesel, axle configuration: 6x4, fuel: diesel, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: air conditioning, = Additional options and accessories = - Brake booster - High beam headlights - Air horn - Rotating beacon = Notes = Pedpfozhnalex Ap Eegn This DAF container truck is equipped with a TAM-20-ton hooklift system, a hydraulic bumper, hydraulic connections at the rear, external planetary axles, a Rockinger trailer coupling, air conditioning, an enhanced engine brake, rotating warning lights, air horns, a light bar with additional spotlights, and aluminum rims. Permissible total weight: 26,000 kg; wheelbase: 3,350 mm. = Additional information = Front axle: Steerable GVWR: 26,000 kg Price: On request Reference number: 65 = Company information = We are located between Antwerp and Brussels, along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 a.m. to 7:00 p.m.

Condition: used, Condition: NEW with pneumatic clamping device. The universal assembly station for the production of wall, ceiling and roof elements in timber frame construction,ceiling and roof elements in timber frame construction. - Heavy-duty, basic structure of the machine frame for a flat work surface - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder is approx. 420 kg/4,200 N. at 10 bar operating pressure It can be clamped in two groups of 5 pieces and 4 pieces, two elements can be clamped/worked on at the same time. Pgodpfx Apjzhnafj Eon - Planking of the work surface as far as technically possible with wooden panels. (A perforated metal panel is available as an option, as shown in the photo)) - Stop system at the bottom with 9 pins and at the side with 7 pins for dimensionally accurate elements. - Swivelling device of the assembly station via 3 hydraulic cylinders for panel weights up to panel weights of up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also installed underneath the assembly station for protection. - The functions are operated via a control bottle. - A compressed air connection and socket are installed on both ends of the station. and on the long side of the station there are 2 sockets and 2 compressed air connections compressed air connections for connecting hand-held devices. - The stations are modular in design, so that they can be expanded immediately or later with a to form a complete turning station. You can see a turning station in picture 3. - Further options: Assembly table without set-up function Perforated metal panels Other working dimensions on request Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of the clamping cylinders: 320 mm - Stop/ socket pin height: 120 mm - Working height: approx. 700 mm - Colour RÁL 7035 light grey