Europlastic Maschinenhandel e.K.

Condition: excellent (used), Year of construction: 2017, clamping force: 2,000 kN, Equipment: documentation/manual, Clamping force: 200 t Screw diameter: 50 mm Shot weight: 359 g Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Shot volume: 392 cm3 Injection pressure: 2000 bar Euromap 67 1x core puller Type: Horizontal Hfsdpfxjz Aty He Ac Ael Drive: Hydraulic

Condition: excellent (used), KRAUSSMAFFEI KM 201-380 PX Injection Molding Machine Year of manufacture: 2020 Operating hours: 21,849 h Manufacturer: KraussMaffei Model: KM 201-380 PX Control system: MC6 – industrial control system based on real-time Ethernet technology Clamping unit design: five-point, double toggle lever mechanism, three-plate unit Clamping drive: servo-electric Injection and plasticizing drive: servo-electric Injection unit movement: servo-hydraulic CLAMPING UNIT Clamping force: 2,000 kN / 200 t Opening force: 300 kN Dimensions of mounting platens: 870 × 820 mm Distance between columns: 635 × 585 mm Opening stroke: 500 mm Mold height min.–max.: 250–550 mm Max. opening width: 1,050 mm Ejector stroke: 200 mm Ejector force front/rear: 39 / 19 kN Ejector speed: 350 mm/s INJECTION UNIT Screw diameter: 40 mm L/D ratio: 20:1 Injection pressure: 1,860 bar Hjdpfx Asz Atc Isc Ajfl Injection volume: 201 cm³ Injection shot weight: 183 g Injection speed: 125 mm/s Injection rate: 157 cm³/s Screw speed: 334 rpm Plasticizing rate: 24.7 g/s Torque: 337 Nm Nozzle clamping force: 34 kN Nozzle radius: 10 mm Nozzle orifice: 4 mm ELECTRICAL PARAMETERS Connected load: 13.8 kW Protection: 63 A Heater power: 11.5 kW Number of cylinder heating zones: 5 Dry cycle according to EUROMAP 6: 2.0 s / 445 mm Oil tank capacity: 200 l WEIGHT AND DIMENSIONS Net weight with control cabinet: 14.3 t Dimensions (L × W × H): 6.12 × 2.17 × 2.21 m

Condition: used, Year of construction: 2012, operating hours: 32,200 h, The machine offered is an ENGEL VC 200/40 Tech, manufactured in 2012. The machine is currently connected to the power grid. Technical specifications: Manufacturer: ENGEL Model: victory 200/40 tech Year of manufacture: 2012 Control system: ENGEL CC 200 Operating hours: approx. 32,200 h Clamping force: 400 kN / 40 t Screw diameter: 30 mm Injection pressure: 1,451 bar Displacement: 99 cm³ Platen size: 500 × 450 mm Tool height: 200 mm Opening stroke: 400 mm Max. platen distance: 600 mm Centering: 125 mm Ejector stroke: 100 mm Nozzle thread: M28 × 1.5 Smallest tool size: 280 mm Power: 15 kW Machine weight: approx. 2,900 kg Core pull: 1 Air ejector: 2 RSP: 3-part Design: tie-bar-less ____ Wittmann W702 picker / handling device Manufacturer: Wittmann Type: W702 Year of manufacture: 2012 Serial No.: 0000171976 Article No.: 7F00000506 X-axis: 100 mm Y-axis: 550 mm Z-axis: 90° Weight: approx. 52 kg Voltage: 105–250 V Current consumption: 1.6 A According to the available Wittmann documentation, the handling device has been refurbished. After completion of the work, a functional test and test run were carried out with the result "OK". _____ Cooling unit Manufacturer: aic regloplas GmbH Model: TAE EVO 081 Year of manufacture: 2006 Serial No.: 2200 086 152 Connection: 400 V / 3 Ph / 50 Hz Hfedjz Ap Imspfx Ac Asl Rated power: 11 kW Max. current consumption: 19 A Protection class: IP54 Max. operating pressure, water circuit: 6 bar Max. water temperature: 65 °C Refrigerant: R407C Refrigerant quantity: 5.5 kg Weight: approx. 331 kg _____ Scope of supply ENGEL victory 200/40 tech injection molding machine Wittmann W702 picker / handling device aic regloplas TAE EVO 081 cooling unit Inspection is possible by appointment. Dismantling and loading are the responsibility of the buyer! The machine is located in Bremen. _____ Subject to prior sale and errors in technical specifications. The technical specifications have been compiled to the best of our knowledge, but do not constitute guaranteed characteristics. Our general terms and conditions apply; the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial customers and without warranty.

Condition: used, Year of construction: 2003, operating hours: 6,659 h, functionality: fully functional, KraussMaffei injection molding machine KM 300-1400 C2, manufactured in 2003, with extensive peripherals and material supply system. Manufacturer: KraussMaffei Machine type: KM 300-1400 C2 Designation on control panel: KM 300-1400 C2P International size designation: KM 1400 C2/300 Machine type: Injection molding machine Year of manufacture: 2003 Machine no.: 61004124 Machine weight: 14,370 kg Operating hours according to display: 66,598:20 h Control system: KraussMaffei Material supply / dosing: Colortronic UB95 Temperature control / cooling unit: Frigel Microgel RCM80/6HP Year of manufacture Frigel: 2013 Voltage Frigel: 400 V Auxiliary voltage Frigel: 110 V Frequency Frigel: 50 Hz Maximum current Frigel: 17 A Refrigerant: R407C Refrigerant filling quantity: 2.4 kg Hodpfxez Apkue Ac Ajfl Temperature range Frigel: -5 to +90 °C Weight Frigel: 200 kg Additional peripherals: Second Frigel Microgel unit, material conveying system, discharge conveyor belt and rotary table available Available from APRIL 2027

Condition: used, CNC CONTROL Controller: C-Dias Hedpoz Alptofx Ac Ajfl CLAMPING UNIT Clamping force kN: 4.200 Tie-bar clearance (H x V) mm: 820 INJECTION UNIT Injection unit size (Euromap): 2300 Screw diameter mm: 70 Max. shot weight (PS) g: 1.100 MOULD FUNCTIONS & HANDLING Hydraulic core pull circuits: 4 Cascade / valve gate circuits: 4 Hot runner control zones: 40 Handling robot (model / year): Wittmann DR 832 (2015) Robot strokes X / Y / Z mm: 900 / 1.600 / 2.500 Robot rotary axes (B / C): C servo 180° / B servo 270° DRIVE Max. hydraulic pressure bar: 190 Mains connection V / Hz / A: 3 x 400 / 50 / 187 + 114

Condition: used, Year of construction: 2002, functionality: fully functional, Manufacturer: KraussMaffei Type: KM 300-1400 C2 Machine type: Injection molding machine Year of manufacture: 2002 Machine no.: 254603 Hfjdpfx Aez Alpgjc Ael Machine weight: 12,500 kg Clamping force: 3,000 kN Control system: KraussMaffei machine control system with screen operation Operating hours according to display: 96,208 h Material supply: Material conveying/dosing components installed on the machine Hydraulics: Rexroth components visible Peripheral control: RMS Systems Touch Control available Conveying technology: Discharge/conveyor belt available Cooling unit 1: Frigel RCM80/6HP Year of manufacture, cooling unit 1: 2012 Voltage, cooling unit 1: 400 V Max. current, cooling unit 1: 17 A Refrigerant, cooling unit 1: R407C Refrigerant charge, cooling unit 1: 2.4 kg Weight, cooling unit 1: 200 kg Cooling unit 2: Frigel RCD80/12HP Year of manufacture, cooling unit 2: 2013 Voltage, cooling unit 2: 400 V Max. current, cooling unit 2: 29 A Refrigerant, cooling unit 2: R407C Refrigerant charge, cooling unit 2: 2.4 kg Weight, cooling unit 2: 240 kg Location: Freiburg Available from APRIL 2027

Condition: good (used), Year of construction: 2002, functionality: fully functional, The machine is in good technical condition, testing can be arranged by prior agreement. Hodpfxsz Ah Rgo Ac Ajfl

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 53 mm, clearance between the columns: 530 mm, displacement volume: 518 cm³, injection pressure: 1,830 bar, injection weight: 477 g, mold height (min.): 180 mm, ejector force: 62 N, ejector stroke: 150 mm, plate width: 700 mm, plate height: 700 mm, total length: 5,800 mm, total width: 1,450 mm, total height: 1,800 mm, overall weight: 5,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 201 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN160A6-IU945 D=53 Servo-hydraulic with electric screw drive Clamping force 160T Tie bar spacing 530x530 Tool installation height 180 to 650 Robot interfaces Euromap 67, Euromap 18 Suitable 12kg linear robot available upon request. Basic standard equipment, see brochure. Optional equipment: 3 × 400 V + N + PE / 50 Hz Germany – CE standard KEBA 2985 control system Standard screw and cylinder unit PID control of the nozzle Thermal insulation cover for the cylinder Closed cooling circuit for the cylinder’s feed zone 1 air blow-off unit on the fixed mold plate EU67 robot interface Centering ring on the fixed mold plate EU2 ejector bore 1 additional 32-A socket Plasticizing interface Cooling circuit of the heat exchanger controlled via solenoid valve Tool thickness increased by 100 mm Moving mold plate with 2 hydraulic core pulls, each with pressure relief Fixed mold plate with 2 hydraulic core pulls, each with pressure relief Hfedpfxezz Sw Is Ac Aol EUROMAP-13 core pull interface on the fixed mold plate EUROMAP-13 core pull interface on the moving mold plate Oil preheating Additionally 6 DI/DO signals as reserve (KEBA) Free programming (KEBA)

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 60 mm, clearance between the columns: 720 mm, displacement volume: 834 cm³, injection pressure: 2,310 bar, injection weight: 767 g, mold height (min.): 250 mm, ejector force: 55 N, ejector stroke: 150 mm, plate width: 970 mm, plate height: 970 mm, total length: 7,150 mm, total width: 1,700 mm, total height: 2,250 mm, overall weight: 12,900 kg, heating capacity: 7.1 kW (9.65 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 213 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: FF300 IU1930 D=60 Fully electric injection molding machine. Ejector, nozzle system, and core pulls are servo-hydraulically controlled. Clamping force: 300T Tie bar spacing: 720x720 Tool installation height: 250 to 650 Hjdpfx Acozz Stps Aofl Robot interfaces: Euromap 67, Euromap 18 Warranty can optionally be extended to 24 or 36 months. Suitable linear robot available upon request. Standard equipment: see brochure. Optional equipment: CE standard Hybrid machine KEBA 8000 control system PID control of the nozzle.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 92 mm, clearance between the columns: 830 mm, displacement volume: 2,458 cm³, injection pressure: 1,360 bar, injection weight: 2,262 g, mold height (min.): 260 mm, ejector force: 110 N, ejector stroke: 220 mm, plate width: 1,165 mm, plate height: 1,145 mm, total length: 8,750 mm, total width: 2,200 mm, total height: 2,200 mm, overall weight: 20,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 248 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN420A5-3330 D=92 Clamping force: 420T Tie bar spacing: 830x810 Mold height: 180 to 550 Robot interfaces: Euromap 67, Euromap 18 Suitable robot available upon request. Basic standard equipment: CS standard Hfedpfszz Srrjx Ac Aol KEBA 1175 control system UK version Standard screw and cylinder unit Environmentally friendly insulating cover

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 35 mm, clearance between the columns: 530 mm, displacement volume: 159 cm³, injection pressure: 2,000 bar, injection weight: 146 g, mold height (min.): 175 mm, ejector force: 40 N, ejector stroke: 125 mm, plate width: 775 mm, plate height: 775 mm, total length: 5,450 mm, total width: 1,550 mm, total height: 1,950 mm, overall weight: 5,850 kg, heating capacity: 7.1 kW (9.65 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 62 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: FF160 IU320 D=35 Fully electric SGM – ejector, nozzle system, core pulls are servo-hydraulic Clamping force 160T Tie bar spacing 530x530 Tool installation height 175 to 620 Robot interfaces Euromap 18 and Euromap 67 Warranty can optionally be extended to 24 or 36 months. Suitable 12 kg linear robot available upon request. Basic standard equipment, see brochure. Optional equipment: CE standard Hybrid machine Maximum tool height increased by 100 mm Bimetal screw and cylinder unit, version B Hedpfxezz Sp Rj Ac Ajfl Interface for conveyor belt Quick-change version of the plasticizing unit with Harting interface 2 additional hydraulic core pulls with end switch monitoring 2 air blow-off units, permanently mounted on the fixed platen Dosing signal interface with HAN-3A connector, plus 1 additional 220 V / 10 A Schuko socket 20 mA interface for mold temperature controller 1 set of 4 × 2 water manifolds on the back of each platen with 3/8" connection 2 sets of water manifolds, each with 4 lines Socket package: 3 × 220 V / 16 A Schuko sockets 2 × 400 V / 16 A CEE sockets 1 × 400 V / 32 A CEE socket 3 freely programmable inputs/outputs Centering rings on both platens according to Euromap 18/67

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 200 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 48 mm, clearance between the columns: 460 mm, displacement volume: 371 cm³, injection pressure: 1,630 bar, injection weight: 341 g, mold height (min.): 160 mm, ejector force: 42 N, ejector stroke: 140 mm, plate width: 690 mm, plate height: 690 mm, total length: 5,200 mm, total width: 1,250 mm, total height: 1,800 mm, overall weight: 5,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 114 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN160A5-IU604 D=48 Clamping force: 160T Tie bar spacing: 460x460 Tool installation height: 160 to 520 Robot interfaces: Euromap 67, Euromap 18 Basic standard equipment Suitable 12 kg linear robot available upon request. Optional equipment: CE standard Quick-change version of the plasticizing unit with Harting interface 1 set of core pull Dosing signal interface with HAN-3A connector Hfodpfszz Spdsx Ac Aol KEBA 1000 1 set with 6 glass flow meters EU67

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 20 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 43 mm, clearance between the columns: 460 mm, displacement volume: 452 cm³, injection pressure: 1,340 bar, injection weight: 416 g, mold height (min.): 160 mm, ejector force: 42 N, ejector stroke: 140 mm, plate width: 690 mm, plate height: 690 mm, total length: 5,200 mm, total width: 1,400 mm, total height: 1,850 mm, overall weight: 4,800 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 114 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN120A5-IU604 D=43 Clamping force: 120T Tie bar spacing: 460x460 Tool installation height: 160 to 520 Robot interfaces: Euromap 67, Euromap 18 Suitable 6kg or 12kg linear robot available upon request. Hfedpfx Aozz Smcjc Asl Basic standard equipment: see brochure. Optional equipment: Water connections: 6 for fixed platens, 6 for movable platens 3 core pulls: 2 on movable platen and 1 on fixed platen 1x Harting connector for the core pull Ejector safety interface 6x cascade 1x valve connector 2x 16A sockets 1x 25A socket

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 200 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 60 mm, clearance between the columns: 730 mm, displacement volume: 664 cm³, injection pressure: 151 bar, injection weight: 611 g, ejector force: 99 N, ejector stroke: 200 mm, plate width: 1,060 mm, plate height: 1,060 mm, total length: 8,100 mm, total width: 2,100 mm, total height: 2,100 mm, overall weight: 17,300 kg, heating capacity: 7.1 kW (9.65 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 180 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: P350H IU1610 D=60 High-performance packaging machine for thin-walled packaging Clamping force: 350 tons Tie bar spacing: 730 x 730 Tool installation height: 350 to 750 Warranty can be optionally extended to 24 or 36 months. Standard options: see brochure Special options: Hfodpezz Sikefx Ac Asl Germany – CE standard 3 × 400 V + N + PE / 50 Hz Screw diameter: 60 mm, L/D ratio 24:1 Ejector stroke increased to 220 mm Ejector, as well as tool opening and closing, with high-performance proportional valve 1 set of hydraulically synchronized core pull head plate with high-speed proportional valve Linear guides for the clamping unit Servo injection up to 1,000 mm/s Electric plasticizing motor Ceramic heater OPC-UA interface KEBA 2985 control system 2 additional sockets: 1 × 16 A 1 × 32 A Water distributor with 10 inlet and 10 outlet connections for movable and fixed clamping plates Energy meter Electric dosing

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 2,200 kN, screw diameter: 60 mm, clearance between the columns: 610 mm, displacement volume: 749 cm³, injection pressure: 1,690 bar, injection weight: 689 g, mold height (min.): 195 mm, ejector force: 77 N, ejector stroke: 160 mm, plate width: 865 mm, plate height: 825 mm, total length: 6,500 mm, total width: 1,800 mm, total height: 2,050 mm, overall weight: 7,900 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 157 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN220A5-IU1269 D=60 Servo-hydraulic Clamping force 220T Tie bar spacing 610x570 Tool mounting height 195 to 610 Robot interfaces Euromap 67, Euromap 18 Suitable 12kg linear robot available upon request Standard options, see brochure Optional features: CE standard 400 V / 3 phases / 50 Hz Oil preheating Ceramic heating PID control of the nozzle Maximum tool height increased by 100 mm Bimetallic screw and cylinder unit, version B Interface for conveyor belt Quick-change version of the plasticizing unit with Harting interface 3 hydraulic core pulls on the moving platen Hjdpfx Ajzz Rkaoc Aofl 2 air blow units, permanently mounted on the fixed platen Metering signal interface with HAN-3A connector Additional 220 V / 10 A Schuko socket 20-mA interface for mold temperature controller KEBA 2985 EU67 1 set of hydraulic sequence valve for needle closing Quick-change version of the plasticizing unit with Harting interface Socket package: 3 × 220 V / 16 A Schuko sockets 2 × 400 V / 16 A CEE sockets 1 × 400 V / 32 A CEE socket 6 freely programmable input/output signals Centering rings on both platens

Condition: used, Year of construction: 2017, operating hours: 21,000 h, clamping force: 100 kN, displacement volume: 46 cm³, injection pressure: 2,400 bar, overall weight: 4,500 kg, screw conveyor diameter: 22 mm, terms of delivery: FCA Pegnitz delivery time: on request Hfjdpozz Aw Ssfx Ac Asl terms of payment: 100% prior to delivery

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 20 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 40 mm, clearance between the columns: 310 mm, displacement volume: 207 cm³, injection pressure: 142 bar, injection weight: 191 g, mold height (min.): 120 mm, ejector force: 22 N, ejector stroke: 60 mm, plate width: 470 mm, plate height: 470 mm, total length: 4,437 mm, total width: 1,418 mm, total height: 1,560 mm, overall weight: 2,900 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 95 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN60A5-IU295 D=40 Clamping force: 60T Tie bar spacing: 310x310 Tool installation height: 120 to 330 Hjdpozzz N Tsfx Ac Aefl Robot interfaces: Euromap 18 and Euromap 67 Basic standard equipment A suitable 6 kg linear robot is available upon request.

Condition: used, Year of construction: 2024, MACHINE PROFILE: 3,800 kN (420 US tons) IMM ===== Machine ID: • Injection Unit: 265 • Clamping Unit: 380 • Weight: 21,300 kg Clamping Unit Specifications: • Force: 3800 kN (388 tons / 420 US tons) • Tie-bar Spacing: 830x830 mm • Platen Size: 1190x1190 mm • Stroke (Open/Eject): 700 / 210 mm • Ejector Force: 90 kN • Mold Height (Min/Max): 300 / 750 mm (+800 option) • Max Mold Weight: 3.8 tons • Dry Cycle: 2.3s / 500mm Hfjdpfxezzv Tgs Ac Asl Injection Unit Specifications (By Screw: 25 / 30 / 35 mm): • L/D Ratio: 24 / 24 / 20 • Capacity: 74 / 106 / 144 cm³ • Rate: 98 / 141 / 192 cm³/s • Recovery Rate: 10 / 15 / 22 g/s • Pressure: 2700 / 2700 / 2000 bar • Stroke / Speed: 150 mm / 420 rpm • Nozzle (Stroke/Force): 305 mm / 40 kN • Heating Capacity: 9.2 kW

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 50 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 30 mm, clearance between the columns: 480 mm, displacement volume: 247 cm³, injection pressure: 272 bar, injection weight: 107 g, mold height (min.): 150 mm, ejector force: 40 N, ejector stroke: 100 mm, plate width: 705 mm, plate height: 705 mm, total length: 5,037 mm, total width: 1,590 mm, total height: 1,850 mm, overall weight: 5,400 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 62 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: FF120 IU320 D=30 Fully electric IMM. Ejector, nozzle system, core pulls servo-hydraulically controlled. Clamping force 120T Tie bar spacing 480x480 Tool installation height 150 to 580 Robot interfaces Euromap 18 and Euromap 67 Warranty can be optionally extended to 24 or 36 months. Suitable 12 kg linear robot available upon request. Optional equipment: Hjdpfx Acjzzn Hls Ajfl CE Maximum tool height increased to 580 mm Bimetallic plasticizing up to GF 30% Interface for conveyor belt Electric quick-change system for the cylinder with Harting interface 2 additional hydraulic core pulls with limit switches 2 air blow devices, permanently mounted on the stationary platen Dosing signal interface with HAN-3A connector Additional power supply: 220 V, 10 A, Schuko socket 20-mA interface for mold temperature controller One water distributor 4 × 2 on the rear of each platen with 3/8" connections 2 water distributor batteries with 4 lines each Socket package: 3 × 220 V / 16 A Schuko sockets 2 × 400 V / 16 A CEE sockets 1 × 400 V / 32 A CEE socket 3 freely programmable input/output signals Centering rings on both platens according to Euromap 18 / 67 Standard equipment: Clamping unit · Clamping unit with automatic central lubrication · Clamping movements via proportional valve control · Hydraulically operated ejector plate · Tool protection · Variable adjustment of the clamping force possible · Ejector protection · Mechanical robot interface Euromap 18 · Footboard protection under the clamping unit from D1 1100 and larger · Precision leveling shims between machine frame and customer floor · Platens with threaded holes and T-slots, see technical data · Automatic central lubrication (with grease) · Ejector plate Injection unit · Hydraulic dual-cylinder injection · Thermally insulated plasticizing unit · 10-stage adjustment of the injection speed · (Control parameters: speed; pressure; position) · 10-stage adjustment of the holding force (Control parameters: speed; pressure; position) · 5-stage adjustment of the plasticizing speed · (Control parameters: speed; pressure; position) · Plasticization supported on linear guides · Hydraulic nozzle system · Cold start protection · Screw retraction function · Automatic shut-off · Measuring system for screw position Electrical system · Plasticizing heater via PID control · Manual, semi-automatic and fully automatic operation possible · Maintenance interface · Automatic alarm system with horn · Unlimited technical parameter memory · Automatic tool height adjustment · Emergency stop function · Online cycle analysis · 12" TFT touch operating panel · Visualized graphic program · PDP interface · Injection monitoring · Tool closing monitoring · SPC interface · IP54 standard · Screw speed measurement · 16-level password security · Euromap 12 · Automatic overheating protection Hydraulic system · Quiet servomotor hydraulic system · Energy-saving servomotor hydraulic system · High-performance servopump system · Back pressure control via proportional valves · Oil preheating · Injection and tool closing monitoring · Automatic pressure and flow calibration · Oil temperature and oil level alarm

Condition: excellent (used), Year of construction: 2007, operating hours: 88,631 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 40 mm, clearance between the columns: 520 mm, displacement volume: 201 cm³, injection pressure: 2,000 bar, injection weight: 184 g, plate length: 795 mm, plate height: 790 mm, total length: 5,100 mm, total width: 2,000 mm, overall weight: 9,000 kg, Arburg 520A-1000-400 (246) hybrid injection molding machine with sorting flap and gas boost Number: 246 Availability: in stock Year of production: 2007 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 40 Injection weight [g]: 184 Injection pressure [bar]: 2000 Closing force [kN]: 1600 Column spacing [mm]: 520 x 520 Plate size [mm]: 790 x 795 Control type: Selogica Tongue: german Installed power [kW]: 21.2 Working hours [h]: 88631 Weight [kg]: 9000 Dimensions [mm]: 5100 x 2000 Hfsdpfezzb N Hox Ac Asl Feed hopper: NO Robot socket: Yes Air valve: 3x

Condition: excellent (used), Year of construction: 2016, KRAUSS MAFFEI KM 160-180 EX incl. LRX 100 (35.000 h) (S&P 3800) Manufacture year: 2016 Operating hours: 35,000 Stunden Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 160 t Tie bar distance: 630 x 520 mm Mould installation height min.: 300 mm Plate distance max.: 1000 mm Dimensions: 5400 x 1600 x 2100 mm Eeight: 13200 kg Hodpfx Acjzzbh Ne Aefl Connected load: 28 kW All electric, 2 x Airvalve, 12 x Hoterunner, MC 6 in german, english, polnish and chinese, Interface Robot, Interface Temperatur device, Robot System LRX 100 (10 kg) X = 550mm / Y = 120mm / Z = 1500 mm / C = 90°, price when new approx. 205.000,- Euro Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Manufacture year: 2015 Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Hjdpfx Acozzbhvj Aefl Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Manufacture year: 2015 Operating hours: 25,008 Stunden Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Hjdpfezzbhiex Ac Aofl Plate distance max.: 950 mm Dimensions: 4800 x 1700 x 2400 mm Eeight: 6000 kg Connected load: 29 kW Robot interface EM67, Accumulator, Airvale etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2012, Arburg 820S 4000-2100/400 / Production line with the robot Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection unit: Screw diameter: 60 mm Injection weight: 723 g Injection pressure: 2500 bar Dosing volume: 792 cc Clamping unit: Clamping force: 400 t Bar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in Automatic operation Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 pairs Control with hot runners x 24 Reinforced injection units - bimetal Proportional valve on the vertical injection unit - precise injection Machine with six cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Automatic tool height adjustment Screw diameter in the vertical injection unit: ⌀40 mm - 184 g/PS The built-in system for controlling the print quality from the Sensor Kistler brand - measuring the tool pressure Original Weber rotary table: very precise, electrically driven by a servo motor controlled by an inverter Rotary table diameter: 1200 mm Purchase of the rotary table at an additional cost Robot Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel paths in axes approx.: X-5000, Y-1400, Z-2000 Automatic axis lubrication Touch control panel The robot safety package Robot with adapter and protective housing Purchase of the robot for an additional charge Hjdpfozy I Tpsx Ac Aefl Dimensions: Weight: 21000 kg Length/width/height: 8.00x2.32x4.21 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 1500T 3200-1300 e² / hybrid machine with one rotary table Year of manufacture: 2011 Injection unit: Screw diameter: 60 mm injection weight: 607 g Injection pressure: 2000 bar Metering volume: 664 ccm Clamping unit: clamping force: 320 t tie bar distance: 0x0 mm size of clamping platens: 1510 mm ejector: hydraulic clamping unit: hydraulic Hfedpfxszy I Sxs Ac Ajl Control system: SELOGICA - touch screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30.000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 3 Control with hot runners x 13 Injection unit hardened - bimetal Main machine motor - servo motor driven by inverter Very precise rotary table driven by servo motor controlled by inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor - mold pressure control It is possible to convert the injection unit so that it works vertically Dimensions: Weight: 16080 kg Length/width/height: 4.91x2.12x4.62 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request