Hauer-Schmidt GmbH

Condition: ready for operation (used), total height: 2,200 mm, total width: 850 mm, total length: 1,000 mm, power: 1.5 kW (2.04 HP), empty load weight: 410 kg, load capacity: 25,000 kg, Door het handwiel naar links of rechts te draaien, kunnen de snelheid en de drukkracht zeer nauwkeurig worden geregeld. Deze twee krachten zijn traploos instelbaar met het handwiel. Deze Arlo werkplaats-precisiepers is uitermate geschikt voor het in- en uitpersen van lagers, het inpersen van bussen, het richten van werkstukken en het aanbrengen van spiebanen (brootsen). Max ram adjustment: 380 mm Drawningspeed: variable via handwheel Workingspeed: variable via handwheel Returningspeed: variable via handwheel Passage between uprights: 750 mm / 260 mm Max distance between table - ram: 750 mm Iiodpfx Asxpgfpofpsh

Condition: used, Year of construction: 2011, operating hours: 1,000 h, functionality: fully functional, total height: 4,200 mm, table height: 700 mm, total width: 3,000 mm, total length: 2,000 mm, pressing force: 1,200 t, table width: 3,000 mm, table length: 2,000 mm, overall weight: 60,000 kg, ram plate width: 800 mm, ram plate length: 600 mm, distance table to ram: 700 mm, type of input current: three-phase, distance between stands: 2,200 mm, stroke length: 600 mm, oil tank capacity: 700 l, control cabinet width: 400 mm, input voltage: 380 V, control cabinet height: 2,000 mm, Equipment: safety light barrier, H-frame, 4 columns, daylight 700 mm, stroke 600 mm, distance between columns 2200 mm x 1260 mm, dimensions (LxWxH) 3000x2000x4200 mm, 380V-15kW, weight 60,000 kg Iedpjxn Rvcefx Afpjih

Condition: good (used), Year of construction: 1990, pressing force: 1,200 t, table width: 1,600 mm, table length: 4,000 mm, Pressure: 1200 t Ijdpfx Afsxnkrkopoih Stroke height: 800 mm Table size: 1600 x 4000 mm

Condition: good (used), Year of construction: 1990, total height: 7,200 mm, total width: 4,200 mm, total length: 14,500 mm, throat depth: 700 mm, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Total power requirement: 75 kW Iedjxnkipjpfx Afpsih Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: good (used), functionality: fully functional, machine/vehicle number: 151/6, Hydraulic Straightening Press Manufacturer: WALTER Type: WP Machine No.: 151/6 The press has a table size of Length Width Thickness 1000 390 60 mm Cylinder stroke: 400 mm The current distance between cylinder and table is 450 mm. When the table adjustment is set to the lowest notch, the gap between table and cylinder is 850 mm. (See the attached sketch for details) The machine is also equipped with an appropriate control system. Max. Pressing force: 60 tons 180 bar Table height adjustment approx.: 1000 mm (installation dimension) Iiedpfxoxl Tmfs Afpsh Motor power: 4 kW Two-hand control Emergency stop Foot pedal Stroke limitation via limit switch

Condition: new, The KNUTH KP 100 A is a robust Hydraulic Press from the H-Frame Hydraulic Presses category, crafted in Europe with high-quality components for superior performance in deep drawing, forming, and notching processes. This powerful machine offers force capabilities ranging from 40 to 400 tons, making it suitable for both test and series production. Designed with a perfectly welded frame for high rigidity, it features a large hydraulic cylinder that moves the solid ram plate with excellent stability, supported by heavy-duty self-lubricating circular guides. The KP 100 A includes user-friendly amenities such as a mobile two-hand control panel, adjustable limit switches, and T-slots on the work table for easy tool clamping. Additionally, it is equipped with a low-maintenance hydraulic system and precision-machined components that ensure minimal wear and long-lasting reliability. You can benefit from custom solutions tailored to your needs while enjoying the flexibility of multi-shift operation and the potential for Industry 4.0 integration. To explore the possibilities of this H-Frame Hydraulic Press or to request a quote, contact us today. Iodpfxsxhdzfe Afpsih

Condition: ready for operation (used), total height: 2,110 mm, total width: 2,240 mm, total length: 900 mm, passage width: 1,500 mm, power: 2.2 kW (2.99 HP), empty load weight: 1,250 kg, load capacity: 125,000 kg, width of table: 420 mm movable cylinder electro hydraulic two speed: fast slow Max ram adjustment: 400 mm Drawningspeed: fast 9mm/sec - slow 2,5 mm/sec Returningspeed: 12 mm/sec Max distance between table - ram: 925 mm Courant needed: 380/400V Iisdpfxexgv Nfj Afpeh

Condition: ready for operation (used), Year of construction: 1991, operating hours: 20,242 h, functionality: fully functional, machine/vehicle number: 6538, pressing force: 163 t, overall weight: 25,000 kg, retraction force: 22 t, stroke length: 500 mm, actuation type: hydraulic, TECHNICAL DETAILS Ram Pressing force: 1,600 kN Return force: 220 kN Stroke: 500 mm Drive power: 37 kW Drawing Device Drawing force: 400 kN Stroke: 100 mm Ejector in Ram Ejector force: 50 kN Stroke: 50 mm MACHINE DETAILS Weight: 25,000 kg Electrical Data Pump Unit Ram + Drawing Cushion Rated power: 37 kW Rated current: 72/66 A Voltage: 660/380 V Frequency: 50 Hz Protection class: IP 54 Pump Unit Control Circuit + Ejector Rated power: 7.5/15.5 kW Rated current: 15.5/26.5 A Voltage: 660/380 V Iodpoxgt Tzjfx Afpeih Frequency: 50 Hz Protection class: IP 54 Cooling-Filter Circuit Rated power: 2.2 kW Rated current: 5 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Oil Cooler Rated power: 0.37 kW Rated current: 1.2 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Tool Clamping Rated power: 0.55 kW Rated current: 2.6 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Stop Spindle Rated power: 0.75 kW Rated current: 2.3 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Oil Circulation Lubrication Rated power: 0.3 kW Rated current: 1.3 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Operating hours: 20,242 h EQUIPMENT Decoiler (Year: 1999) Straightening machine (Year: 1999) Feed unit (Year: 2004) Tool breakage monitoring system Note: The seller strongly recommends a prior inspection of the machine, as the press cannot be removed from the hall in its assembled condition. If required, the seller can possibly arrange a specialized company for relocating the machine.

Condition: used, functionality: unexamined, pressing force: 3,200 t, For sale: Used Dieffenbacher hydraulic press with a pressing force of 3200 tons. Originally designed for heavy-duty forming applications in the metal and automotive industries. Condition: used. Location: Montenegro. Contact us for more information. Iiodpfexft S Ijx Afpeh

Condition: excellent (used), Year of construction: 2014, Hydraulic Press Bunorm 4S-500 Manufacturer: Bunorm AG Model: 4S-500 Year of Manufacture: 2014 Pressing Force: 500 kN Maximum Pressure: 225 bar Weight: 3,200 kg Electrical Connection: 3×400 V + N + PE Frequency: 50 Hz Protection: 20 A Control System: Siemens Simatic HMI Touch Safety System: SICK C4000 Light Curtain SCOPE OF DELIVERY Includes, among others (non-exhaustive list): Hydraulic Press Bunorm 4S-500 Exact scope of delivery as shown in the photo series. Iedexfl Axspfx Afpoih The Bunorm 4S-500 hydraulic press impresses with its robust construction and a pressing force of 500 kN at a maximum pressure of 225 bar. With its solid build and a weight of 3,200 kg, the press is suitable for demanding production applications. The integrated Siemens Simatic HMI Touch control system enables precise and user-friendly operation. Thanks to the modern SICK C4000 light curtain safety system, a high level of operator protection is ensured. This machine is the ideal solution for companies that value reliability, precision, and safety. No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: ready for operation (used), total height: 2,140 mm, total width: 865 mm, total length: 1,665 mm, passage width: 1,100 mm, power: 2.2 kW (2.99 HP), empty load weight: 970 kg, load capacity: 100,000 kg, Arlo 100 T / 1000 Vario Max ram adjustment: 380 mm Drawningspeed: 7,54 mm/sec Iodjxc Rbbspfx Afpjih Workingspeed: 2,47 mm/sec Returningspeed: 9,06 mm/sec

Condition: used, functionality: fully functional, pressing force: 150 t, pressure: 250 bar, Double-column hydraulic press equipped with two side cylinders connected by a platen for the pre-pressing and pressing of rotors and stators, and a central cylinder for the extraction of the mandrel and fitting of the rotor shaft, as well as shaft removal during repair operations. Features a retractable table for stacking and handling rotors and stators. MAIN CYLINDERS 150 t - 2 hydraulic cylinders of 75 t each, with a stroke of 750 mm, joined by a slotted platen with a central bore of 250 mm diameter. - Maximum usable height between cylinder platens: 1,300 mm. - Minimum usable height between cylinder platens: 550 mm. Iiedpfoxc Ekdex Afpoh EXTRACTION CYLINDER - 1 central cylinder of 80 t, with a 1,200 mm stroke. - Prepared to fit an extraction clamp; rod end threaded M 35 x 1.50 pitch, 40 mm length. - Maximum usable height of extraction cylinder: 1,300 mm to the root of the rod thread. - Minimum usable height of extraction cylinder: 100 mm to the root of the rod thread. TABLE AND STRUCTURE - Mechanically movable slotted table, 1,200 x 800 mm, with a 600 mm stroke, fitted with a worm gear reducer and 0.5 HP electric motor with brake. - Central bore on the table: 250 mm diameter; max. depth 550 mm. - Effective lifting capacity of the table for movement: 4 t. - Table traverse speed: 2,600 mm/min. - Internal front width: 1,250 mm. - Working height: 600 mm. HYDRAULIC POWER UNIT - Two-speed hydraulic unit, 5.5 HP, with automatic disengagement of rapid speed and independent speeds. Maximum pressure: 250 bar. - Digital control for maximum force during pre-pressing, pressing, and fitting; digital tonnage display. Pressure adjustment system via proportional valves. - Selector for approach and measuring speeds.

Condition: ready for operation (used), total height: 4,900 mm, total width: 5,900 mm, total length: 8,500 mm, passage width: 3,900 mm, power: 11 kW (14.96 HP), empty load weight: 85,000 kg, load capacity: 400,000 kg, Portaalrichtpers 400 ton Voor het gericht van assen, gietstalen producten, gewalste producten, smeedstukken met vrije matrijs, vlak staal maar ook voor het in- en uitpersen van lagers, bussen, krimpringen,... 14 individuele tegendrukcilinders in de tabel - 3 ton dop per cilinder - 100 mm slak per cilinder - Druk 300 kg/cm² - Doorgang tussen de staanders: 3990 mm Werksnelheid – bij max. druk: 2 mm/sec Terugloopsnelheid: 50 mm/sec Sluitsnelheid: 30 mm/sec Max ram adjustment: 1550 mm Drawningspeed: 30 mm/sec Workingspeed: 2 mm/sec Returningspeed: 50 mm/sec Max distance between table - ram: 1550 mm Ijdpfxsxcqkpe Afpoih Dimensions of the table: 7000 x 3200 mm

Condition: good (used), pressure 250 t passage width 700 mm stroke 850 mm table surface area 2000 x 1000 mm mould height - Max./min. 355 / 1200 mm total power requirement 30 kW weight of the machine ca. 25 t Iisdpfexcblwsx Afpsh dimensions of the machine ca. 4,2 x 2,1 x 5,5 m

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 65056, pressing force: 5,000 t, table width: 4,520 mm, table length: 2,150 mm, overall weight: 319,000 kg, stroke length: 900 mm, Equipment: safety light barrier, Pressure build-up time: 3.6 s Iisdpfx Asxb Tpljfpeh Pressure relief time: 1.5 s 6-axis industrial robot, manuf. ABB, type IRB6640 M2004 Control cabinet array, 12-door, SN 6/5056 Operator panel, water-based hydraulic unit Tool change device Mesh safety enclosure with light curtains

Condition: ready for operation (used), passage width: 780 mm, power: 30 kW (40.79 HP), empty load weight: 11,000 kg, load capacity: 450,000 kg, Doorgang tussen de staanders: 780 mm Maximale ramverstelling: 800 mm Afstand tussen tafel en ram: 1200 mm Tafeloppervlak: 1200 x 780 mm Elektromotor: 30 kW Gewicht: 11 ton 4-koloms hydraulische pers hoge sluitsnelheid Isdpfx Afoxb E E Eopeih ideaal voor composietprojecten de pers kan langdurig onder druk staan één enkelwerkende hydraulische hoofdzuiger twee kleinere zuigers om de stempel terug te trekken verwarming kan optioneel gebruikt worden (aan/uit) Max ram adjustment: 800 mm Distance between table -- ram: 1200 mm Table area: 1200 x 780 mm

Condition: used, Manufacturer: EXNER Type: EX 20 Iedsxbf Ndepfx Afpjih Maximum pressing force: 20 t Table size: 480 x 350 mm Maximum tool height: 230 mm

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Isdpfx Aow R S Eljfpeih Safety distance: 100mm Post-travel: max. 10 mm Motor power: 3 kW

Condition: used, Year of construction: 2025, total height: 2,200 mm, total width: 800 mm, total length: 1,450 mm, Empty weight: 970 kg Price: On request Movable Press-Cylinder - Year: 2025 - Documentation available: Yes - CE marking present: Yes - Operating hours: 0 - Control: Conventional - Motor power: 3.0kW - Table width: 300mm - Throat depth: 1100mm - Table length: 1500mm - Ram length: 100mm - Model: Hydraulic - Max. stroke: 380mm - Number of columns: 2 - Height adjustment: 750mm - Power: 100.0ton - Transport dimensions: 1450mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 970kg Iedpfsw N Su Dsx Afpoih - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2025, total height: 2,200 mm, total width: 800 mm, total length: 1,100 mm, Empty weight: 540 kg Price: On request Movable pressing-cylinder - Year: 2025 - Documentation available: Yes - CE marking present: Yes - Operating hours: 0 - Control: Conventional - Motor power: 2.2kW - Table width: 260mm - Throat depth: 750mm - Table length: 1000mm - Ram length: 100mm - Model: Hydraulic - Max. stroke: 380mm - Number of columns: 2 - Height adjustment: 750mm - Power: 60.0ton - Transport dimensions: 1100mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 540kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Iiedew N St Hjpfx Afpeh Lukas van Rossum

Condition: used, functionality: unexamined, Press with hydraulic unit for sale Iijdpfx Afjw Izrijpeh

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: BH2020/0020, pressing force: 60 t, Equipment: safety light barrier, For Sale: Refurbished Hydraulic Press – D2430 A (600 kN) Ijdpfow Ic T Isx Afpoih We are offering for sale a D2430 A hydraulic press, fully refurbished in 2020. The machine is in excellent working condition and currently located in Hajdúnánás, Hungary. Technical Specifications: • Nominal Pressing Force: 600 kN • Total Weight: 2,000 kg • Motor Power: 7.5 kW • Supply Voltage: 400 V AC • Control Voltage: 24 V DC • Refurbishment Year: 2020 • CE certified Additional Information: • Project executed by Balliv Hungary Kft. • Originally installed for Innovatív Térburkolatfejlesztő Kft. • The machine is equipped with a two-hand control system and safety guards for secure operation. • Ideal for pressing, forming, or industrial molding applications. ⸻ 💡 Loading: EXW (Ex Works) – The buyer is responsible for loading and transportation. 📍 Machine location: Hajdúnánás, Hungary 📩 For further details, photos, or to arrange a viewing, feel free to contact us.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 019165, pressing force: 200 t, Equipment: safety light barrier, Y27 Series Features 1. Lower power consumption and high sealing reduced the production costs. 2. The structure is simple, and the operation is simple. Independent electrical control system, reliable, easy maintenance. 3. Fully-scale security protection and noise reduction processing provide a high-quality working environment. A 4-column hydraulic press, also known as a four-column hydraulic press or 4-post hydraulic press, is a type of hydraulic press machine used in various industries for a wide range of applications, including metal forming, forging, stamping, deep drawing, and molding processes. This type of hydraulic press is characterized by its robust and stable structure, making it suitable for heavy-duty and high-pressure operations. Here are some key features and applications of a 4-column hydraulic press: Key Features: Four Vertical Columns: The most distinctive feature of a 4-column hydraulic press is its four vertical columns arranged in a rectangular or square shape. These columns provide structural stability and support for the press's upper and lower platens, ensuring accurate and consistent results during pressing operations. Hydraulic System: The press is powered by a hydraulic system that generates the force required for pressing or shaping materials. The hydraulic system includes a hydraulic pump, cylinders, valves, and a reservoir for hydraulic fluid. Adjustable Stroke Length: Many 4-column hydraulic presses have an adjustable stroke length, allowing operators to control the depth to which the upper platen descends. This feature is essential for accommodating various workpieces and forming processes. Pressure Control: Operators can control the hydraulic pressure to apply the desired force during pressing operations. Pressure can be adjusted to match the specific requirements of the material and the operation being performed. Isdpew Ic Tnofx Afpeih Safety Features: Safety is a critical consideration in hydraulic press operations. These machines come equipped with safety features such as emergency stop buttons, two-hand controls, and safety guards to protect operators from accidents.

Condition: good (used), Year of construction: 1978, functionality: fully functional, total height: 7,900 mm, total width: 5,750 mm, total length: 7,000 mm, pressing force: 2,000 t, table width: 1,650 mm, table length: 2,000 mm, overall weight: 144,500 kg, distance table to ram: 2,400 mm, Equipment: documentation/manual, 2000 tons Composite press hydraulic (isothermal) Located: Balti city (postal code: MD-3100), Republic of Moldova (European region) The press is connected and 100% complete. ----- Manufacturer: Dnepropress (Ukraine) Nominal force: 2000 tons Slide stroke: 1400 mm Shut height (distance between plates): 2400 mm Table size(width/length): 1650×2000 mm Overall machine dimensions: 7000×5750×7900 mm Iodpfxew Hride Afpeih Main motor power: 62 kW Press weight: 145 tons YOM: 1986 The press is connected For molding thermoplastics, thermosetting materials, elastomers, rubber materials, and thin sheet metal. The press is equipped with a sliding table. - Molding of thermosetting materials in closed, open, and casting molds with complex cycles: heating and cooling, pressure build-up and release, dwell under load, and ejection of the finished product; - Isothermal forging of heated billets while maintaining a constant temperature of the die tooling and the billet; - Molding of powder materials, production of large-sized products from plastic masses and composites in closed heated molds; - Sheet stamping and sheet forming processes. The press has the following working and structural units and assemblies: - Working pair – ram and table, equipped with T-slots necessary for mounting additional attachments such as heating plates, which are included with this press. - Upper console (movable mechanism) with the main working cylinder mounted on it. The console moves along cylindrical guides. - Four return cylinders located on the table, ensuring smooth lifting of the ram and its return to the initial position. - Ejector mounted on the lower console (table). - Hydraulic tank and control valve mounted on the main cylinder, providing its lifting and lowering. - Spool valves and pressure regulators controlling the working cycle of the press. Installed on the hydraulic power unit with a high-pressure pump. - Limit switches ensuring the stability of the mechanical braking system of the ram. Installed on the frame. The D 2243 press is operated via a remote control panel. 27/08/2025

Condition: excellent (used), Year of construction: 2004, Manufacturer: MULLER WEINGARDEN Model: G2-1400/630 Year: 2005 Condition: Used Stock Number: 0362 CONDITION: EXCELLENT Press Force: 1,400 t Slide Stroke: 1,500 mm Slide Working Speed: 40 to 127 mm/s Approach Speed: 700/850 mm/s Table Dimensions: 3,500 x 2,500 mm Front Opening: 3,500 mm Lower Blank Holder Cushion Force: 400 t Lower Blank Holder Cushion Stroke: 300 mm Side Opening: 2,400 mm Lateral Movable Table: Present (side) Press Force (Secondary): 630 t Press Slide Stroke: 1,300 mm Press Table Size: 3,350 x 2,130 mm Front Opening (Press): 3,350 mm Press Slide Working Speed: 12 to 20 strokes per minute Side Opening (Press): Lateral opening present Iodpfow Hdpcox Afpoih