Glas und Raum Kemal Gündogan

Condition: used, Year of construction: 2017, functionality: fully functional, cutting height (max.): 2,200 mm, cutting length (max.): 4,200 mm, saw blade diameter: 250 mm, We are offering a Format 4 Kappa V60 vertical panel saw, purchased as an ex-display model. The machine has only been used very occasionally by us, serving as a backup or to supplement our processing capacity. The unit is in very good condition. Please feel free to contact us. Motor power: 4.5 kW (6.0 HP) - Cutting length: 4200 mm - Cutting depth: 60 mm Dcedpfx Ajxg Ecnjcwsn - Cutting height: 2200 mm - Year: 2017 The listed price is net.

Condition: used, Crosscut Saw APS KS-160 Cutting width 450 mm, Max cutting height 160 mm with material width around 180 mm, Dsdexd T Uyepfx Acwocn Blade diameter 550 mm, Motor approx. 5.5 kW, 380 V, Material clamp, Pneumatic blade extension, Outfeed rollers 200 x 52 cm, Machine dimensions 100 x 100 cm, The saw is operational and ready for use.

Condition: good (used), Year of construction: 2019, functionality: fully functional, cutting height (max.): 100 mm, cutting width (max.): 1,250 mm, type of motor: three-phase motor, Equipment: motor brake, Carriage length: 2800 mm X-Roll carriage guide system Saw adjustable from 0 to 45° Saw lifting and lowering Dcedpfx Ajxd Anvecwon Digital measurement display on the right side Cutting width to the right: 1250 mm Spindle diameter: 30 mm Spindle adjustable from 0 to 45° Height-adjustable spindle Left-right swivel Speeds: 3,500 / 6,500 / 8,000 / 10,000 rpm Max. diameter of milling tools: 230 mm Spindle working height: 115 mm Spindle covers Main saw motor: 7.35 kW European CE certificate The machine is in good condition; bearings and electrical components were replaced this year. Powerful motor and start-up disc. The table shows signs of use but nothing that hinders normal operation. Available from December 1st.

Condition: used, Year of construction: 2016, functionality: fully functional, power: 7.35 kW (9.99 HP), motor voltage: 400 V, frequency: 50 Hz, spindle diameter: 30 mm, Premium operating comfort for maximum productivity. The eye-level control panel allows for convenient machine operation. The machine is equipped with the following special features: 7.35 kW (10 HP) motor voltage-free contact external spindle lock for the milling spindle stepless speed control milling spindle 30 mm guide rails 550 anodized with safety rulers Dsdpfx Acexdccgswjcn outrigger table 1100 cross-cut fence 1100 mm coupling system for table extension swivel device for feed unit

Condition: new, Year of construction: 2025, functionality: fully functional, The Nanxing NPC330 is a high-performance beam saw designed for fast and precise cutting of MDF, particleboard, plywood and other wood-based panels. It is the ideal solution for furniture factories seeking high throughput and consistent accuracy. The saw carriage is driven by a 2 kW servo motor with rack and pinion transmission, reaching cutting speeds up to 90 m/min and return speeds up to 120 m/min. The powerful software package includes cutting optimization, work process management, cutting simulation, error display, and automatic label printing for efficient production tracking. Key Features Cutting height: up to 120 mm Cutting width: 3270 mm Automatic pressure beam adjusts to the total height of the panel stack for maximum efficiency Air flotation table ensures scratch-free and easy panel handling 10 pneumatic clamps (optional 12) for secure fixing and precise positioning Servo side alignment for perfectly perpendicular cuts Full protection system: operator hand protection, piano-type blade cover, optional safety fence & light barrier Quick-change main saw blade and one-click scoring blade adjustment Automatic lubrication system for longer machine life and lower maintenance costs Industrial control cabinet with international brand components, 21.5” touchscreen, PC (i5 CPU, 8 GB RAM) Technical Specifications Max. cutting length: 3270 mm Djdpfxexcwwpj Acwjcn Max. cutting height: 90 mm (optional 120 mm) Main saw motor: 15 kW (optional 18.5 kW), 3910 rpm Scoring saw motor: 4300 rpm Main saw blade: Ø380 mm (shaft Ø60 mm) Scoring saw blade: Ø200 mm (shaft Ø45 mm) Feed speed: 90 m/min (return 120 m/min) Total installed power: 24.2 kW Machine dimensions: 6900 × 5400 × 1820 mm Weight: 4,560 kg Power supply: 380V / 50Hz / 3-phase Air requirement: 0.6 MPa Dust extraction: Ø150 mm × 3, min. speed 28 m/s Benefits for Manufacturers High productivity: package cutting with fast forward and return speed Excellent accuracy: ±0.03 mm thanks to heavy-duty frame and pneumatic clamping Digital optimization: AutoCut software included to minimize waste and optimize cutting plans Maximum safety: full machine guarding, light barrier, and emergency stop Operator-friendly: air flotation table and servo-driven feeding system for effortless panel handling

Condition: ready for operation (used), Year of construction: 2013, This MACO VK370 AR ALU Circular Wood Saw was manufactured in 2013. It features a head motor of 5.5 kW, a trim roller motor of 0.75 kW, and a lubrication pump of 0.1 kW. The blade speed ranges from 20–120 rev/min with a maximum blade diameter of 370 mm. It operates at a working air pressure of 5–7 bar. Consider the opportunity to buy this MACO VK370 AR ALU Circular Wood Saw. Contact us for more information. Dcodpfjxbulbex Acwen Application Types Sawing (Wood)

Condition: as good as new (ex-display), cutting height (max.): 155 mm, cutting width (max.): 800 mm, cutting length (max.): 2,500 mm, power: 7.35 kW (9.99 HP), saw blade diameter: 450 mm, overall weight: 930 kg, motor voltage: 400 V, frequency: 50 Hz, working height: 890 mm, Further technical data Sliding table: 2,500 mm Tiltable: yes Extension table size: 1,500 mm Crosscut fence: 3,200 mm Guard: Overhead guard, hood for 90° and hood for angle cuts, height-adjustable and swivelable out of the working area Extraction connection: 120/80 mm Speed: 3,500/4,500/5,500 rpm Saw blade diameter: 250–450 mm Height adjustment: electric Angle adjustment: electric Standard equipment Star-delta starter Operating hours counter Dcsdpfoxazgijx Acwen Circular saw fence with fine adjustment Circular saw unit with saw aggregate 90°– 45° Electric angle and height adjustment with digital display ("Power-Drive" K2) “X-Roll” sliding table, cutting length 2,500 mm Edging shoe x-motion control, 10" color touchscreen in operator panel at eye level. USB port and prepared for network connectivity. The panel can be optimally positioned for the operator and swiveled out of the work area. Special equipment 008 10 HP (7.3 kW) motor, 400 V 010 Star-delta starter 071 Tool compartment for 4 saw blades 075 Scoring unit automatic, 1.1 kW 079 Scoring unit status light 780 Quick-lock rapid change system on the circular saw blade 135 Sliding table 3,200 mm 139 Surcharge for electric control unit on sliding table 892 Position-controlled rip fence, cutting width 1,250 mm 161 Extension with movable support rail 168 Crosscut fence 3,200 mm with 2 digital stops 220 Parts list holder with A4 clipboard

Condition: used, Year of construction: 1981, condition gebraucht serial number 8930 Motor output 5,5 kW engine 380V, 12 A,, 50 Hz +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Dsdpfxew Syhqj Acwscn +++++

Condition: used, Year of construction: 1995, Sawblade tiltable . ° cutting width . mm Dedpfx Aow Syhkocwscn serial number 95-11-552

Condition: used, Circular panel saw Manufacturer: Griggio Model: CA40 Dcsdsw Nww Dopfx Acwen Year: 2001 Country of manufacture: Italy

Condition: used, SCM SC3 classic Model: SCM GROUP SPA Manufacturer: SC 3C Max. saw blade diameter with scoring blade installed: 315 mm 90%45° max. saw blade projection from table: 100/79 mm Cutting width on parallel fence: 900 - 1270 mm Dodpfsw Nwdwox Acwecn Squaring stroke: 2310 - 2260 mm Three-phase motors starting from: 5(6)/50(60)

Condition: used, Panel saw Manufacturer: Holz-Her Model: 1265 Year: 1989 Technical specifications Working dimensions Cutting dimensions (mm) Length x Height 3300/4300 / 5300 x 1900 4300 / 5300 x 2070 4300 / 5300 x 2200 Trimming height = max. Cutting height - 65 mm Cutting depth (mm): 45 (50) Cutting depth depends on the workpiece Dimensions in brackets without Super Cut Saw unit Motor power: 3 kW, 400 V, 50 Hz Saw blade diameter (mm): 220 Saw blade speed (min) at 50 Hz: 5450 Dcjdpjw I A Dyefx Acwsn Extraction Air consumption (m/h): 2000 Air speed (m/s): 20 Connection (mm): 160 Machine dimensions Floor area Length (mm): 4315 / 5315 / 6315 Depth (mm): 1420 Height (mm): 2500 / 2640 / 2775 Weight (kg): approx. 760 (5300 x 2200mm) Gross weight (kg): approx. 990 (5300 x 2200 mm)

Condition: used, Year of construction: 1994, functionality: fully functional, cutting height (max.): 95 mm, cutting length (max.): 1,250 mm, saw blade diameter: 350 mm, – Operating manual, DTR – Year of manufacture: 1994 – Made in Poland TECHNICAL SPECIFICATIONS: – Max. blade diameter: 350 mm – Adjustable cutting height – Angle adjustment: 0°-45° – Spindle diameter: 30 mm – Spindle lock – Blade guard – Max. cutting width with guide: 1300 mm – 2 spindle speeds: 3000, 4500 rpm – Table dimensions: 1020 x 1120 mm – Cutting length on sliding carriage: 1250 mm – Fence with latch: 1370/2500 mm – Scoring unit – Max. scoring blade diameter: 130 mm – Scoring spindle diameter: 20 mm – Main motor: 4 kW – Scoring motor: 0.75 kW – Shipping dimensions (L/W/H): 2150 / 1200 / 1450 mm Dcedpfx Acjw Iqkbewsn – Weight: 711 kg

Condition: used, Year of construction: 2016, functionality: fully functional, cutting height (max.): 104 mm, cutting width (max.): 900 mm, cutting length (max.): 1,300 mm, saw blade diameter: 315 mm, - Austrian production - Year of manufacture: 2016 - X-Roll carriage guide - CE certified - Possibility to install a cutter TECHNICAL PARAMETERS: - Carriage length: 1300 mm - Cutting width on right side: 900 mm - Motor power: 7.35 kW - Electric brake - Blade diameter: 315 mm - Possibility to install milling cutter: 228 mm thickness from 6–20 mm - Fence with one stop: 1050 mm - X-Roll carriage guidance Dcjdpfxjw H R Ufs Acwen - Saw blade angle adjustment: 0° – 45° - Height adjustment - Cutting height with blade 315 mm: 104 mm - Extraction port diameter: 120 and 50 mm - Table height from base: 900 mm - Transport dimensions: 150 x 150 x 110 cm - Weight: ~400 kg

Condition: used, Year of construction: 2005, functionality: fully functional, cutting height (max.): 140 mm, cutting width (max.): 600 mm, saw blade diameter: 500 mm, table length: 3,000 mm, table width: 620 mm, type of input current: three-phase, saw blade bore: 30 mm, – Year of manufacture: 2005 – Polish production – DTR and CE Dcsdpfx Aew H R Tbocwsn TECHNICAL PARAMETERS: – Cutting width: 600 mm – Cutting height: 140 mm – Blade diameter: 500 mm – Main motor: 5.5 kW – Pneumatic clamping – Nozzle diameter: 120 mm – Saw spindle diameter: 30 mm – Feed table: 200 x 62 cm – Discharge table: 300 x 62 cm – Transport dimensions (L/W/H): 300 x 190 x 150 cm – Weight: 650 kg

Condition: excellent (used), Overband magnetic separator Electromagnet width 1600 Axle distance approx. 2.5 m Suitable for transverse discharge Dcjdpfx Acow H Imfswon Pole extension Rectifier and drive motor are new

Condition: like new (used), For sale is a used Format4 Kappa 450 sliding table panel saw with a cutting length of 2800 mm. This machine is currently being used as a showroom display unit and is therefore in like-new condition. Technical specifications: - Cutting length: 2800 mm - Cutting width: 800 mm - Cutting height: 155 mm - Max. saw blade diameter: 450 mm - Electrically adjustable height and tilting - Extraction port Ø 120 mm - Motor power: 7.5 kW / 10.2 HP - Year of manufacture: 2023 The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! For more information call: 06244-20299 Dcjdpfx Acew Hd Sqewsn Related terms: saw, circular saw, panel saw, sliding table saw Reference: R-A0117

Condition: excellent (used), OMGA SP500 F Crosscut Saw Cutting width: 500 mm Cutting height: 150 mm Pneumatic saw feed Pneumatic material clamping Maximum saw blade size min/max: 490-500 mm Saw blade bore diameter: 30 mm Right table length: 200 cm Dcodpow Dy Shofx Acwon Left table length: 200 cm Saw motor power: 5.5 kW CE certificate

Condition: good (used), Code: 0181 Brand: HARWI - NEDERLAND Model: 130 - CE Standard Circular saw with tilting blade for cutting solid wood, panels and various materials - CE Standard Technical data: Sturdy structure Tilting blade 0-45° Max cutting height 110 mm Cutting height at 45° 90 mm Blade diameter mm 400n F30 Cutting width mm 680 Motor power Kw 5,5 Upper protective cover Djdpfxow Du E Aj Acwocn New Vidia blade included Suction port diameter mm 120 Overall dimensions mm 1300 x 1350 x 1350 h Weight kg 320

Condition: like new (used), Year of construction: 2020, For sale: Walter line, year 2021, has cut only 100m3 – like new. The diagram mistakenly shows sawmill 630; it is actually KBA 500. The rest is correct. Maximum log diameter 350mm, maximum length 4000mm. Price new: 930,000. POSSIBLE exchange of KBA 500 sawmill for larger KBA 630 with rotation, 30/37 kW. Output: 60-70m3 per shift, easily handles two log truck loads – very fast return on investment, buy and start earning immediately, don’t wait! Dodpfx Acjwyl Dbswscn

Condition: good (used), Year of construction: 2003, saw blade diameter: 450 mm, Nice under-table crosscut saw with two-hand operation and foot switch. Saw blade diameter 450 mm, max. cutting height 16 cm, with 2 roller conveyors. Dcsdpfx Aswx R Ivjcwjn

Condition: good (used), Year of construction: 1992, 🔧 FOR SALE – PILOT TECHNOLOGY CU1 MACHINING CENTER 📍 Available immediately: PILOT TECHNOLOGIE CU1 machining center in perfect condition, ready to be installed in your workshop! 📌 Main features: ✅ Brand: PILOT TECHNOLOGIE ✅ Type: Machining center ✅ Model: CU1 ✅ CNC: FANUC ✅ Year: 1992 ✅ X-axis: 510.0 mm ✅ Y-axis: 410.0 mm ✅ Z-axis: 400.0 mm ✅ Rotary table (4th axis): no ✅ CNC type: FANUC ✅ Table length: 700.0 mm ✅ Table width: 420.0 mm ✅ Tool magazines: 16 ✅ Spindle taper: BT40 ✅ Max. spindle speed: 1000 rpm :4000 rpm 📸 See photo below (machine can be viewed on site) 📦 Condition: Very good Good 💰Price: on request Dcodpfewwrlaox Acwsn 👉 For more technical information, additional photos or viewings please contact us.

Condition: used, Circular saw Manufacturer: Karl Mrozek Power: 5.5kw Year of manufacture: 1983 Table size (mm): 1180x670 Cutting depth mm max.: 50 - 125 Cutting width (mm): 1250 Dcjdpfowtd Hzsx Acwsn

Condition: used, Year of construction: 2006, machine/vehicle number: KK1/023307, SECOND-HAND CIRCULAR SAW TECNOMAX TYPE S315 WS - CE RULES - Volt. 400/50 - S/N KK1/023307 - Year 2006 Dsdpowr Ngwefx Acwjcn

Condition: new, Year of construction: 2025, functionality: fully functional, MULTIRIP CIRCULAR SAW AND EDGER - IN ONE MACHINE 20-160: 🔹 Main Drive Motor: 37–75 kW for consistent, powerful cutting Dcodpfewf Ihtex Acwjn 🔹 Flexible Cutting Configuration: • 1–4 fully adjustable movable - HYDRAULIC OR SERVO - heads • 1 fixed head, with the option to mount multiple fixed circular blades 🔹 Customizable Board Width: Up to 1000 mm or 1300 mm — tailored to your production needs 🔹 Advanced Mechanisation Options: • Manual or motorized feeding • Centering systems for precise positioning • Outfeed conveyors with integrated sorting lamellas for efficient waste handling • Fully adaptable to your specific requirements Built for durability. Engineered for precision. Designed to optimize your production flow. 👉 Contact us today to customize your EDGER 20-160 to your exact specifications!