CLI Manchester Limited

Condition: new, Year of construction: 2021, functionality: fully functional, input voltage: 400 V, rotational speed (max.): 1,500 rpm, fuel: domestic gas L, overall weight: 11,100 kg, motor voltage: 400 V, frequency: 50 Hz, input current: 1,299 A, empty load weight: 11,100 kg, Equipment: documentation/manual, For sale: New natural gas cogeneration unit. JENBACHER JMS 412 GS-N.L Gas engine: Jenbacher J412 GS-B06 (928 kW) Dodpfx Aexlr Disghsku Generator: Nidec Leroy-Somer LSA 50.2L8 C 6S/4 (400V/50Hz) The package includes a complete Jenbacher gas engine with ignition, lubrication, and cooling systems. Also included: gas assembly (valves, regulator, filter), electrical cabinet, electrical equipment, and complete technical documentation. Operating hours: 0. Warranty: none. The engine has been inspected by an authorized service center. No issues detected. Immaculate condition. More information and photos available upon request.

Condition: excellent (used), Year of construction: 2014, operating hours: 31,347 h, functionality: fully functional, power: 800 kW (1,087.70 HP), Equipment: documentation/manual, MWM CHP plant for decentralized electricity and heat generation in electrically controlled, grid-connected operation Controllability 50-100% Technical specifications: Electrical output in kW (electrical): 800 Efficiency: Electrical: 42.3% Thermal: 45.5% Total: 87.3% Emission values: Dsdpfxoxfgxbe Aghoku NOx 500 mg/Nm³

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Dkedexc Ni Rjpfx Agheu

Condition: used, Year of construction: 2008, For sale, we offer an MTU combined heat and power (CHP) plant with 1.2 MW electrical output. Technical details: Manufacturer: MTU Engine: MTU 12V4000L62 Generator: Stamford Year of manufacture: 2008 (completely overhauled in 2015) Dodpfjxcwlasx Agheku Operating hours: 63,000 Including control cabinets Including dry cooler

Condition: new, Year of construction: 2015, Combined heat and power unit with 2 buffer storage tanks Additional title: Hot water and power supply system Energy input: 64 kW Gas consumption: 6 Nm³/h Electrical power: 20 kW Thermal power: 41 kW Length: 1668 mm Width: 800 mm Height: 1266 mm Weight: 800 kg Position: free standing Dkjdew Tap Rjpfx Aghju Features: Gas-powered 4-cylinder 4-stroke engine with 2237 cm³ displacement, 2 buffer storage tanks with pressure equalisation tank

Condition: used, Year of construction: 2013, operating hours: 60,109 h, functionality: limited functionality, power: 200 kW (271.92 HP), rotational speed (min.): 1,500 rpm, fuel: domestic gas L, motor voltage: 400 V, frequency: 50 Hz, The module was completely overhauled by Sokratherm in 2022. The system is currently not operational because the exhaust gas heat exchanger is leaking. Dkedpfow S Iwmox Agheu

Condition: used, Year of construction: 2022, operating hours: 13,500 h, functionality: fully functional, nominal power: 50 kW (67.98 HP), For sale is an HKA 49. Included are the wood gasifier, the CHP unit (BHKW), the Energy Block housing the system, and the feed screw including the complete room discharge system. Dkjdjw Spiqopfx Aghsu

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: G3858, power: 466 kW (633.58 HP), rotational speed (min.): 1,500 rpm, CHP unit, combined heat and power plant Djdpfx Agjw D At Ijheku

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, The Spanner plant consists of the cogenerator and the reformer. The reformer, the heart of the wood chip system, produces natural wood gas from wood chips through a controlled process. This gas is used to operate the cogenerator. The generated thermal energy can be used to heat buildings, drying plants or district heating networks, while the electricity is fed into the grid. Model: HK45 Electrical performance: 45 kW Thermal performance: 120 kW Wood chip consumption: 45 kg/h Requirements for wood chips: Grain size G30-G40 Maximum moisture 15% Dsdewvhf Tspfx Aghsku Fine dust (

Condition: excellent (used), Used CHP unit Manufacturer: Indop Year of manufacture: 2014 Fuel type: Natural gas Electrical output: 50 kW Thermal output: 80 kW Operating hours: 26,605 h Engine type: MAN gas engine e0834 e32 (54 kW) Number of cylinders: 4 Available: Dksdpfxswthzij Aghju 3 units Indop 50 kW at €13,400 each 2 units Indop 20 kW at €8,600 each 1 unit Energ-g 50 kW at €13,400 1 MAN gas engine e0834 e32 (54 kW) Test run possible.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: F82946, type of input current: three-phase, power: 237 kW (322.23 HP), input voltage: 400 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, connection type: Direkt, overall weight: 4,650 kg, type of cooling: water, motor voltage: 400 V, nominal power: 237 kW (322.23 HP), nominal power (apparent): 296 kVA, frequency: 50 Hz, operating pressure: 6 bar, continuous power (apparent): 296 kVA, continuous power: 237 kW (322.23 HP), input current: 482 A, empty load weight: 4,650 kg, temperature: 70 °C, ambient temperature (max.): 25 °C, For sale is a combined heat and power plant (CHP) from the renowned manufacturer Sokratherm. The unit is currently still in operation, runs perfectly and can be inspected during dismantling. Technical Data: Model: Sokratherm GG 237 S mE Electrical output: 237 kW Thermal output: 372 kW Year of manufacture: 2008 Dodpfxjwp Nnpo Aghoku Fuel: Natural gas Rated speed: 1500 1/min Voltage: 400 V Weight: 4,650 kg Serial number: F82946 Condition: The unit is currently running in continuous operation

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: F1141106, type of input current: three-phase, power: 142 kW (193.07 HP), input voltage: 400 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, connection type: Direkt, overall weight: 2,850 kg, type of cooling: water, motor voltage: 400 V, nominal power: 142 kW (193.07 HP), nominal power (apparent): 178 kVA, frequency: 50 Hz, operating pressure: 3 bar, pressure: 3 bar, continuous power (apparent): 178 kVA, continuous power: 142 kW (193.07 HP), input current: 256 A, temperature: 70 °C, ambient temperature (max.): 25 °C, number of cylinders: 12, Technical data: Model: Sokratherm GG 140 S Electrical output: 142 kW Thermal output: 216 kW Year of manufacture: 2012 Dksdpfxjwp Ncts Aghou Fuel: natural gas Rated speed: 1500 1/min Voltage: 400 V Weight: 2,850 kg Serial number: F1141106 Condition: Fully functional and in operation No known defects

Condition: ready for operation (used), Year of construction: 2005, A SenerTec CHP unit is available. Heat output: 11.8kW-12.5kW, max. flow and return temperature: 85°C/70°C, operating overpressure: 5bar, rated electrical output: 5.5kW, power factor: 0.88, max. fuel input: 21.3kW, fuel: natural gas II. Machine dimensions X/Y/Z: 1100mm/750mm/1000mm, weight: approx. 500kg, control: Travis 5475 (5400 series). Documentation available. Dkjdpfxjwk Nlqs Aghou

Condition: used, Year of construction: 2003, Name: Used compact CHP module Manufacturer: Sokratherm Type: FG 114i Year built: 2003 Generator: Leroy Somer Generator Type: LSA 46.2 Turbo: Yes Fuel type: Digester gas Electrical power: 114 kW Thermal power: 186 kW Efficiency: Nominal power of 95.4% Hours of operation: 57.460 hrs Driving force: 130 kW. Engine type: MAN E2876 TE 302. Combustion system: Gas-Otto engine. Number of cylinders/arrangement: 6 in line. Speed: 1500 rpm Dimensions: L 2.700 x W 950 x H 2.300 mm Empty weight: 2.750 kg Message: Electrical power: 114 kW. Thermal power: 186 kW Condition: Second hand Dksdpfx Agowhwpfjhsu Price: On demand

Condition: used, Year of construction: 2015, functionality: fully functional, power: 420 kW (571.04 HP), CHP unit in an insulated container System still in operation Dodpfx Agswgiz Rjhsku See photos for condition

Condition: excellent (used), Year of construction: 2010, operating hours: 120 h, functionality: fully functional, power: 1,064 kW (1,446.64 HP), fuel type: gas, output frequency: 50 Hz, Jenbacher J320 GS CHP unit price includes dismantling and loading onto your trucks. Year: 2010 Power: 1064 KW Dedpfx Aswd Nw Teghoku Frequency: 50hz Running hours: 120k (overhaul at 100k) reports available. Currently running Full tech data sheet available. Set in very good condition. Serviced and maintained by engineers. Contact for more info and pictures.

Condition: used, Year of construction: 2018, functionality: fully functional, Spanner RE2 biogas engines with full RHI and ROCS transferrable - 4 off at 45kw power and heat output each (total 180kW power) - Split into 2 separate water systems. - 2 x 2000L buffer stores - 2 x heat exchangers (more available on request) - 30kW fan - 20m of 2m x 2m ducting Dkedpjv T Txuofx Aghsu - G99 compliant - Gas data system - Biogas RHI, Biomass RHI and ROCS for a further 13 years

Condition: excellent (used), Year of construction: 2020, operating hours: 5,065 h, functionality: fully functional, power: 901 kW (1,225.02 HP), total height: 2,990 mm, total length: 12,000 mm, total width: 2,990 mm, fuel: domestic gas H, Equipment: documentation/manual, For sale are 2 identical, as-new, natural gas CHP units in container execution and one chimney with 3 tubes: Brief description: CONTAINER CHP 901 kWe / 928 kWth Gas engine: Jenbacher J 412 GS-B06 Generator: 400V / 50 Hz / STAMFORD PE 734C For sale are 2 identical, as-new, natural gas CHP units in container execution and one chimney with 3 tubes. Short description: CONTAINER CHP 901 kWe / 928 kWth Natural gas engine: Jenbacher J 412 GS-B06 Generator: 400V / 50 Hz / STAMFORD PE 734C Dkjdpfx Ajvuz Utjghsu Further information: - Complete CHP package in a container 12x3x3, Super Silent, color RAL7004, including mixture cooling and emergency cooling system as a table cooler, including outdoor glycol protection system, Oxikat, preparation for SCR system, island operation capability, Profibus DP interface etc. - according to technical plans, documents, R&I diagrams and data sheets - The unit has completed 5,056 operating hours (duration from 01/2021 - 12/2021) - The entire CHP is in very good condition, the unit has been regularly serviced via a premium service contract and is currently in the care of the manufacturer. Further Information:  entire package CHP unit in container 12x3x3, Super Silent, color RAL7004, incl. mixture cooling and emergency cooling system as table cooler, incl. outdoor glycol protection system, Oxikat, preparation for SCR system, island operation capability, Profibus DP interface etc  according to available technical drawings, plans, documents, P&I diagrams and data sheets  5,056 operating hours performed by the genset (running time from 01/2021 - 12/2021)  Entire CHP unit in very good condition, Genset was regularly maintained via premium service contract, currently preserved by the manufacturer.

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, input voltage: 400 V, rotational speed (min.): 1,500 rpm, warranty duration: 12 months, nominal power: 1,000 kW (1,359.62 HP), frequency: 50 Hz, continuous power: 1,000 kW (1,359.62 HP), Gas generator or cogeneration 1000kW. 40ft container including cooling system. Engine MWM TCG 3016V16S, Generator LSA, MCB - ABB or Schneider, gas line Dungs, control system ComAp or Deiff. Delivery 30-90 days. Dsdpfx Ajvta A Hoghjku

Condition: good (used), functionality: fully functional, The machine consists of: 1. Loading conveyor belt for the sheet to be joined - Dimensions: 3200 x 2000 - Power: 2 kW 2. Lifting table - Dimensions: 3200 x 2000 - Capacity: 5000 kg - Power: 4 kW 3. Conveyor belt for loading empty pallets - Dimensions: 3200 x 2000 - Power: 2 kW 4. Empty loader for the sheet to be optimized VTSA 3800 - Length: 3200 - Feeding speed: 55 m/min - Power: 5 kW 5. Roller feeder VTSM 3800 - Length: 3200 - Power: 1.5 kW 6. Angle transmission with rollers and belts KS4 - 5400 - Length: 3200 - Width: 2000 - Power: 2+2 kW 7. Conveyor belt for aligning sheets on the side edge PKP - Length: 3000 - Power: 4 kW 8. Conveyor belt with chains for pinching the sheet - Length: 2000 - Power: 5.5 kW 9. Camera for reading the material to be optimized OK P - Analyzes the sheet and sends the cutting commands (head cut, tail cut, hole cut, etc., according to the parameters set by the operator) - Sheet thickness control unit 10. Pasta cutting unit - Hydraulic control 11. Group for selecting waste material (it is inserted in a belt below) 12. Splicing group with thermo-fuse wire - Number of splicing wires: 6 13. Cutter for cutting the joined sheets to size Dsdpevnri Iefx Agheku - Hydraulic control 14. Stacker for unloading the joined sheets - Length: 3200 - Width: 2000 - Power: 3 kW 15. Lift table - Length: 3200 - Width: 2000 - Load: 5000 kg - Power: 4 kW 16. Conveyor belt for unloading pallets - Length: 3200 - Width: 2000 - Power: 2 kW 17. Conveyor belt for loading empty pallets - Length: 3200 - Width: 2000 - Power: 2 kW 18. Evacuation belt for cutting waste - Power: 4 kW 19. Mechanical cutter for shredding waste

Condition: good (used), Year of construction: 2014, operating hours: 42,000 h, functionality: fully functional, 1 combined heat and power unit for natural gas (convertible to other gas types) Output: 800 KW electrical 800 KW thermal Manufacturer: G2 Engine: MWM, type TCG2016 V16C Operating hours: 42 000 Year of construction: 2014 Complete system in container (12 x 4.5 m) with all heat exchangers, switch cabinets, power supply All maintenance intervals carried out by the manufacturer. Ready for immediate use! Further details on request Dedpfx Ajvgbdreghjku

Condition: like new (used), Year of construction: 2015, functionality: fully functional, type of input current: three-phase, power: 45 kW (61.18 HP), input voltage: 400 V, For sale Spanner Biomass cogenerator station with 9 units. Model - BHKW45-8,0-V1.1 Year - 2015-2017 Nominal power - 6x45KW, 3X50KW Voltage - 400V Frequency - 50HZ Current - 3 phase Engine - 8.0L Dkodpsvcbtrjfx Aghou Price shown per unit. 1 unit includes: Biomass gasifier, generator that converts the gas with engine to electricity, separate control cabinets for gasifier and generator. Price is discussable. Please see attached documents. Preferred text communication via e-mail or whatsapp.

Condition: used, Year of construction: 1994, Technical details: production capacity: 2x 4,8 MW number of Generators: 2 Stück fuel tank capacity: 480 m³ type of fuel: Gas + Öl Complete Power Plant Dkjdju Nxatopfx Aghju 2 combustion engines 12 cyl V -Motor Make Maschinenwerke Halberstadt Type: 12 VDG for oil and gas 2 Generators Make Leo Somer with: - electrical capacity 4,6 MW each - mechanical capacity 4,8 MW each - thermal capacity 4,8 MW each - 2 recovery boiler - Stromeinspeisung: Mittelspannung 10 KV (direkt ins Netz) furthermore: heat exchanger, catalyst, control room, medium high voltage system, oil preparation plant, intermediate storage tank + fuel depot tanks 4,8 m³ *

Condition: new, Year of construction: 2024, functionality: fully functional, power: 350 kW (475.87 HP), Compact, highly efficient combined heat and power unit with a state-of-the-art SCANIA V 8-cylinder, lean-burn gas turbo, 4-stroke gas Otto engine. Unit, gas pressure control system, mixture and engine water cooling circuit mounted on base frame for power and heat generation with a high-quality synchronous generator (3P, 400V, 50Hz) for mains/parallel operation and optimized heat extraction via plate heat exchanger for heating water/process heat with a temperature level of VL 85°C / RL 70°C, OPTIONAL: with catalytic converter (optional SCR system) for low-emission operation in accordance with the MCP Directive (EU) and 44th BImSchV (DE). TECHNICAL DATA GENSET /CHP - Biogas 50% CH4 Electrical output at cos φ=1: 350 kWel Electrical efficiency: 41.4 % Thermal output motor at 180^exhaust gas temperature: 334 kWth Electricity coefficient el/th. : 1,05 Engine type V8 Displacement: 16 Ltr Combustion thermal output - 100% load: 845kWel Gas consumption at50%CH4: 169.1Nm³/h Length x width x height m 4.1 x 1.5 x 2.1 Weight unfilled 4500kg The CHP has a control cabinet with a display for the visualization of all relevant operating parameters including a DSL modem for remote maintenance and external monitoring, as well as an interface for control energy for connection to the Energiepilot E2M. The scope of delivery includes a mains starter to provide the optimum starting speed, as well as a gas detector, smoke detector, emergency stop switch and alarm flashing light/horn. All pipes are made of V2A and insulated where necessary. To ensure that the motors are kept warm, the installed heat pumps are programmed to start up in a set cycle, that they start up in a set cycle and thus enable the desired temperature to be maintained. Dkjdpfx Aget Uu Ezoheu An automatic gas shut-off valve for installation outside the CHP installation room is not included in the scope of delivery. The CHP unit complies with the medium-voltage directive VDE-AR-N 4110:2018-11. An automatic gas shut-off valve for installation outside the CHP installation room and all operating fluids are not included in the scope of delivery. The CHP unit is also optionally available in a container. The entire unit is also available as a natural gas version.

Condition: new, Year of construction: 2024, functionality: unexamined, power: 265 kW (360.30 HP), Compact, highly efficient combined heat and power unit with a state-of-the-art SCANIA 6-cylinder, lean-burn gas turbo, 4-stroke gas Otto engine. Unit, gas pressure control system, mixture and engine water cooling circuit mounted on base frame for power and heat generation with a high-quality synchronous generator (3P, 400V, 50Hz) for mains parallel operation and optimized heat extraction via plate heat exchanger for heating water/process heat with a temperature level of VL 90°C / RL 75°C, with catalytic converter (optional SCR system) for low-emission operation in accordance with the MCP Directive (EU) and 44th BImSchV (DE). TECHNICAL DATA GENSET /BHKW - NATURAL GAS/BIOMETHANE Electrical output at cos φ=1: 265 kWel Electrical efficiency: 41.9 % Thermal efficiency: 44.1 % Total efficiency: 86.0 % Thermal output motor: 150 kWth Thermal output at 120°C exhaust gas temperature: 129 kWth Total thermal output: 279 kWth Electricity coefficient el/th. : 0,95 LEAN TURBO NATURAL GAS / BIOMETHANE ENGINE Engine type 6R Displacement: 12,7Ltr Combustion heat output - 100% load: 632kWel Gas consumption: 63,2Nm³/h Length x width x height m 4.1 x 1.5 x 2.1 The CHP has a control cabinet with a display for the visualization of all relevant operating parameters including a DSL modem for remote maintenance and external monitoring, as well as an interface for control energy for connection to the Energiepilot E2M. The scope of delivery includes a mains starter to provide the optimum starting speed, as well as a gas detector, smoke detector, emergency stop switch and alarm flashing light/horn. All pipes are made of V2A and insulated where necessary. Dsdpjt E N I Ssfx Aghoku The CHP unit complies with the medium-voltage directive VDE-AR-N 4110:2018-11. An automatic gas shut-off valve for installation outside the CHP installation room and all operating fluids are not included in the scope of delivery. The CHP unit is also optionally available in a container.