Loe Loet Dijla Company

Year of construction: 2024, condition: excellent (used), The ZLC series cold chamber die casting machines have been developed based on over 12 years of experience and are widely used for producing zinc or brass alloy components in sectors such as automotive, electrical engineering, electronics, toys, household appliances, and computers. These cold chamber die casting machines are equipped with high-quality imported hydraulic components, a robust machine frame, tie bars made from high-tensile alloy steel, and industry-specific control systems. Key advantages include advanced design, precision manufacturing, rapid response, easy operation, reliability, safety, and low energy consumption. The machine comprises a control system, hydraulic system, lubrication system, cooling system, clamping system, injection system, machine frame, safety door, and more. Its primary function is to extract a precise quantity of molten metal from a separate furnace, pour it into the injection sleeve, and, under high pressure, inject the completely molten alloy into a mold mounted on the platen. The die closes and the high pressure is maintained until the alloy fully solidifies inside the mold. Hfjdpfx Aoy A Hnysd Hof

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 5000014, Year of construction: 2008, operating hours: 1,813 h, motor manufacturer: Perkins, tire condition: 80 %, empty load weight: 4,700 kg, Equipment: cabin, MAFI MTD55 4x4 – ONLY 1,813 hours – Perkins – HUSS filter – industrial tractor For sale: MAFI MTD55 4x4 industrial tractor in very good technical condition, with low operating hours – only 1,813 engine hours. This machine is ideal for work in production plants, warehouses, ports, and internal logistics operations. Technical data: Year of manufacture: 2008 Drive: 4x4 Engine: Perkins (diesel) Power: 74.5 kW Operating hours: 1,813 h Unladen weight: 4,700 kg Hedpfx Asy Aupfsd Hoff Drawbar pull: up to 35 kN Equipment: Enclosed cab HUSS exhaust filtration system (permitting indoor use) Transport/industrial hitch Simple, robust construction (low failure rate) The machine is fully functional, ready for operation (after mechanical inspection). The engine runs smoothly and there are no issues with the drive system. Visual condition is good, with typical signs of use (as seen in the photos). Very low hours for this type of equipment. The machine is available for on-site inspection and testing. Transport can be arranged.

Year of construction: 2010, condition: reconditioned (used), functionality: fully functional, number of previous owners: 2, bar length: 1,000 mm, machine/vehicle number: BLP80, High frequency welding machine under review Hfodpfey Atyvox Ad Hjf 80cm of arm 10KW of power 20x1000 single or 10x1000mm adjustable double electrode large work table Once the overhaul is complete, the welding machine will comply with current EC regulations 12 months warranty

Year of construction: 2025, condition: new, A selection of NEW Q-Tech QT550-Airless Paint- Sprayers 220/240v - available as a colective lot or to buy individually. Applications For Internal Walls & Ceilings, External Walls & Roofs. Flow Rate 5.5ltr/min. Max Tip 0.031". MWP 227 bar/3,300 psi. Motor 1,500 Watt DC. Complete With QTech Q345 Airless Spray Gun, QTech Contractor 517 & 531 Airless Tips, Contractor Guard, 3/8" x 15m Textile Braided Hose Assembly, 1/4" x 1m Textile Braided Whip Hose. Weight 59kg. S/No. 2025047001 (2025). Hodpfx Adoy Ambgs Hsff

Year of construction: 2000, condition: used, machine/vehicle number: 1681/04, Panel Vertical Buffer Stacking Robot The system consists of a vertical buffer (vertical storage location/rack for sandwich panels) and a storage and retrieval unit (transport robot). Vertical buffer structure: 3x27 storage compartments with a pitch of approx. 75 mm Length: 6,000 mm Width: 2,200 mm Height: 2,800 mm Transport robot (storage and retrieval unit) structure: 2 x 90° pivoting roller conveyors Chassis for longitudinal travel approx. 9,000 mm Hedpfxjyzt Hmj Ad Hjff Including 4 individually controllable clamping grippers for pushing out the sandwich panels Including roller conveyor with 90° pivoting function for positioning wall elements

Year of construction: 2000, condition: used, machine/vehicle number: 1660, Production line for sandwich panels / Lewecke loading gantry The following product was manufactured on this system (alternative products possible): Sandwich elements / sandwich panels with a polystyrene core, aluminum outer layer 0.5 - 0.8 mm thick, inner layer made of hardboard/plywood 1.8 - 2.3 mm thick. Maximum dimensions: 2500 mm x 8000 mm Maximum total thickness: 30 mm Maximum weight: 50 kg The production line consists of: 1. Conveyor belt 2. Roller press 3. Roller conveyor, infeed, panel turner 4. Roller conveyor, outfeed, panel turner 5. OMMA glue application machine (hot-melt), roller applicator HGS_H 327, year of manufacture 2020 Hsdpfx Adeyztygj Hsff 6. Conveyor belt 7. Roller press 8. Gantry system + 2x staging areas for sheets / top layers, vacuum handling system L/W/H 20,000mm/8,000mm/4,000mm Alternatively, available together with a vertical panel buffer – see separate listing.

Condition: used, Year of construction: 2021, functionality: fully functional, We offer this used Kongsberg X44 cutting machine, year of manufacture 2021. Hfodeyzrylspfx Ad Hof

Year of construction: 2010, operating hours: 500 h, condition: ready for operation (used), functionality: fully functional, welding current (max.): 1,300 A, Used Lincoln Ideal Arc DC 1000 submerged arc welding machine in good condition, equipped with LT 7 tractor, 25 m connecting cable, and comes with warranty – for sale! Hfsdpjyy Dkgsfx Ad Hef

Year of construction: 1990, condition: excellent (used), functionality: fully functional, 1. Tire Vulcanization Machine – Pressure Chamber, BANDAG, model: EPC 22 EVI, serial no.: 280 2. Tire Cushion Gum Applying Machine, BANDAG, model: EB-H2 3. Tire Casing Mounting Machine, BANDAG, model: EB-A10, serial no.: 232 Hodpfeyyz Ucox Ad Hoff 4. Rotary Support Stand, BANDAG, model: 1120 E 5. Tire Wear Inspection Machine, BANDAG, model: EB-A5 6. Vulcanization Transport Line with 28 columns and 50 hook couplings, BANDAG, model: 1190 E 7. Rotary Tread Cutting Machine, BANDAG, model: E511, serial no.: 183 8. Tire Filling Machine, BANDAG, model: EB-H2 9. Patch Application Machine, BANDAG, model: E 211, serial no.: 331 10. Tire Envelope Applying Machine, BANDAG, model: 9001 E, serial no.: 302 11. Manual Tire Buffing Machine, BANDAG, model: EB-C2 12. Swivel Jib Crane with Electric Winch, 2 units 13. Ventilation System with installations, model: FSB 1190, serial no.: 739 14. Dust Collector, model: SH 700 SB/RV 15. Tire Buffer, BANDAG, model: 24 CXE, serial no.: 3045 16. Manual Layer Extruder, BANDAG, model: EB-CB2, serial no.: 776 17. Rubber Envelope Rings, 60 pcs 18. Screw Compressor, ATLAS COPCO, model: GA 30 19. Air Receiver, IMP, serial no.: 98665

Year of construction: 1996, condition: good (used), functionality: fully functional, machine/vehicle number: nieznany, In continuous production until 30.04.2026 The machine does not have CE certification Technical Specifications • Machine type: Automatic screen printing line • Application: Packaging glass decoration (HORECA, breweries, spirits) • Number of colors: Multicolor (configuration depends on setup – 8 stations, 8 colors) Hedeyybtlopfx Ad Heff • Production speed: up to approx. 50 pcs/min (depending on decoration and glass) • Decoration type: Ceramic / organic inks • Transport system: Automated transfer between stations • Heated squeegees: Heated squeegee system • Vacuum: Assisted by vacuum system

Year of construction: 2022, condition: good (used), functionality: fully functional, machine/vehicle number: P0000581, Bonding device from Alba Industries GmbH, used as a parts dispenser 24VDC / pneumatic. Includes extensive components from Festo, Norelem, Item, Gutekunst, Beham, Igus, ACE, Storz, Elesa & Ganter, Steyr-Werner, etc. Bill of materials of the installed elements see attached PDF. EPlan and pneumatic diagrams are available and can be viewed upon request and on-site appointment. Hfedpfoyybitex Ad Hsf

Year of construction: 2002, condition: used, functionality: fully functional, 2 level conveyor system to deliver materials from Warehouse to production and back to warehouse. Hfedpfjyx Dd Rox Ad Hof

Year of construction: 2023, condition: like new (used), functionality: fully functional, This specialized automatic machine is purpose-built for processing parallel twin wires, offering integrated cutting, stripping, wire splitting, and simultaneous dual terminal crimping within a fully automated cycle. The advanced splitting mechanism automatically separates both conductors of parallel twin cables and ensures precise terminal crimping at each wire end, all in one operation. Engineered for high-throughput parallel wire processing, this machine significantly boosts productivity by crimping both separated wire ends at the same time, rather than consecutively. Its innovative dual-head crimping system allows simultaneous application of terminals, effectively doubling production output compared to single-wire machines. The adaptable modular design supports a broad range of parallel wire sizes and terminal types via quick-change tooling. Operators can efficiently switch between different wire gauges and terminal configurations by simply exchanging the appropriate splitting dies and crimping applicators, supporting flexible and efficient production across a variety of product lines. An advanced touchscreen interface provides independent module control, enabling features such as selective operation for single-end crimping or opposite-end stripping. The built-in program memory stores processing recipes for various twin-wire products, allowing immediate parameter recall during product changes for reduced setup time and enhanced workflow efficiency. New price: nearly €40,000 The machine has been used but is in perfect working condition, as new. Hedjyxy Nvepfx Ad Hjff

Condition: ready for operation (used), operating hours: 2,880 h, functionality: fully functional, DrDryice The C500 is an older model, but it has proven to be a strong, durable, and reliable workhorse. Engineered with robust industrial construction, this machine continues to deliver consistent performance and is ideal for companies seeking a low-investment solution for dry ice pellet production. Machine hours: 2,880 h •⁠ ⁠Includes 3 mm die plate •⁠ ⁠Minimum production capacity: 100 kg/h •⁠ ⁠Solid, heavy-duty construction •⁠ ⁠Proven reliability Worldwide shipping available. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blaster, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice Hfsdpfxsyxxgao Ad Hjf

Condition: used, Year of construction: 2014, functionality: fully functional, pressure: 8 bar, temperature: 20 °C, type of input current: three-phase, input voltage: 400 V, overall weight: 1,250 kg, usable tank capacity: 90 l, rotational speed (max.): 758 rpm, Equipment: rotational speed infinitely variable, We are offering this used RESPECTA DB13A/20-30L mixing and stirring unit, year of manufacture 2014. Manufacturer: RESPECTA Model: DB13A/20-30L Year: 2014 Condition: used Machine type: Mixing and Stirring Unit Weight: 1,250 kg Voltage: 400 V Frequency: 50 Hz CE safety standards The machine is in perfect working condition. This machine can also be purchased together with other units for a complete production line. Technical Details - Mixing Unit: The mixing unit is designed for blending dry fillers with liquids. Maximum filler particle size: 2mm Mixture output rate: approx. 20 – 30 l/min Mixing tool: single-flight mixing screw, left-handed, equipped with wear-protection coating, robust cylinder design with high surface hardness Drive: 3-phase motor, 4 kW – 379 rpm, 400V / 50 Hz Speed range: adjustable from 0 to 758 rpm Screw overload protection: set at 80% of the rated current Quantity adjustment: potentiometer, stepless, without altering the mixing recipe Technical Details - Binder Premixer: Dynamic mixing of pure liquids without any solid content. Mixing performance: max. 5 l/min Mixing tool: single-flight mixing screw, left-handed System materials: stainless steel, Viton, PTFE Drive: three-phase motor, 0.55 kW, 2830 rpm, 230-400 V / 50 Hz Pressure monitoring: S-11 pressure transmitter, 0-4 bar G ½" Pressure display: control terminal at switch cabinet Technical Details - Filler Dosing System: Four dosing systems for volumetric dosing of free-flowing, non-bridging dry fillers. The dosing units are interchangeable with identical units and secured with quick-release clamps. All dosing units are equipped with level sensors. For fine fillers, a horizontal agitator is integrated in dosing unit 2 to prevent bridge formation as much as possible. Fillers with max. grain size 2mm Dosing rate: approx. 2 – 10 l/min Dosing tool: single-flight spiral, left-handed Dosing drive: geared motor, 0.75 kW – 91 rpm, 230-400 V / 50 Hz Speed control: frequency converter – 0.75 kW – 230 V / 50 Hz Speed range: adjustable from 0 to 182 rpm Quantity adjustment and display: control terminal at switch cabinet Storage vessel Capacity: approx. 90 l (4x) Technical Details - Resin Dosing System: Pump unit for volumetric dosing of pure liquids without admixtures of solid or reactive substances. Dosing rate: approx. 400 – 2000 ml/min Hfjdpjyxg Dgofx Ad Hof Viscosity at 20°C: approx. 2,000 mPas Pump type: gear pump Pump pressure: max. permitted 8 bar Drive: three-phase geared motor, 0.37 kW – 291 rpm, 230–400 V / 50 Hz Speed control: frequency converter – 0.75 kW – 230 V / 50 Hz Speed range: adjustable from 0 to 582 rpm Quantity adjustment and display: control terminal at switch cabinet Dismantling and removal at buyer's own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please feel free to send us a message or give us a call.

Year of construction: 2015, condition: good (used), Extra-large induction heater A comprehensive range for heating bearings up to 1,200 kg, 20 kVA The SKF TIH L series induction heaters are characterized by high heating capacity and large dimensions. They are an extension of the TIH series, designed specifically for heating larger bearings. All heaters are equipped with sliding yokes, two induction coils, and state-of-the-art power electronics. The frame of the heater allows easy transportation by forklift. The primary differences among the TIH L series models are their heating power and application range. The power control feature allows precise adjustment of the temperature ramp-up rate. With a power requirement of 20 kVA, the TIH L series units can heat even large bearings with a maximum weight of 1,200 kg. Automatic demagnetization reduces the risk of contamination from metallic particles or abrasion after heating. Hodpfoyw Tvgex Ad Hsff An overheating protection system minimizes the risk of damage to the induction coils and electronics, improving reliability and safety. Available with three operating modes. The devices are available for the three most common international operating voltages. Rolling bearings can be heated either vertically or horizontally.

Condition: not inspected (used), functionality: unexamined, ⚠️ Important Notice: For Business Customers Only (B2B) This sale is exclusively intended for entrepreneurs as defined by § 14 BGB (commercial operators, self-employed persons, freelancers). Sale to private individuals (consumers) is excluded. By submitting a bid or making a purchase, you expressly confirm your status as a business entity and that the acquisition is for your commercial or self-employed professional activities. _____ Hfedpfsyw Hiyjx Ad Hjf For sale is a strip coating line. The system originates from insolvency assets and was in successful operation until the facility was closed. Technical specifications & capacities: • Material: Suitable for aluminum and stainless steel coils. • Strip width: 80 mm up to max. 600 mm. • Material thickness: 0.1 mm to 2.0 mm (for aluminum). • Processing speed: approx. 20–25 m/min. • Coil weight: Max. 3,000 kg. • Inner diameter: 400 mm (expandable to 500 mm with available adapter chucks). • Coating options: From narrow color stripes (starting at 7 mm) up to full-surface coating. • Temperature range: Oven operation at approx. 250°C. System design & components: • Infeed: Expandable decoiler with height-adjustable coil transport cart (load capacity 3,000 N). • Coating unit: Double coater for precise paint application using steel roll deflection. • Drying: Drying and firing zone with two Eclipse gas burners and control panel. • Safety & Environment: FID probe for continuous monitoring of solvent concentration in the oven, including control unit. • Cooling: Cooling section with fresh air supply before exiting the oven. • Post-processing: Integrated slitting device for strip longitudinal cutting (incl. slitting knives and spacer rings). • Outfeed: Hydraulic strip guiding, friction plate brake, and transfer arms at the recoiler. Scope of delivery: • Complete system as described. • Accessories (spacer rings, slitting knives, adapter chucks). Inspection & transaction: • Condition: Used, fully operational up to decommissioning. • Location: Wuppertal. • Dismantling/transport: Dismantling and transport to be carried out by the buyer at their own expense. • Invoice: You will receive a proper invoice with VAT shown separately. Terms of sale and delivery: • Condition: The system is sold as is from its current location. • Disclaimer: As this is a B2B transaction between professionals, the sale is made to the exclusion of any warranty and guarantee. • Inspection: On-site inspection is expressly recommended.

Condition: used, SKF 23996 CA/W33 Spherical Roller Bearings – Used – Excellent Condition – 2 pcs Available: 2 SKF spherical roller bearings, model 23996 CA/W33, sourced from an industrial plant and fully operational. These are high-quality components, suitable for heavy-duty applications and ideal as immediate replacement parts. Technical Specifications: - Brand: SKF - Model: 23996 CA/W33 - Type: Spherical Roller Bearing - Cage: CA (solid brass) - Lubrication: W33 (lubrication groove and holes) - High radial and axial load capacity Suitable for: - Industrial gearboxes - Hoisting/lifting systems - Steel plants and cement works - Heavy-duty machinery - Pumping and snowmaking installations Condition: - Used, but in excellent working condition - Removed from a functioning plant - Raceways and rollers in very good shape (see photos) - Protective grease applied - No significant oxidation or visible damage - Stored in original SKF crate Hfedsyu Rm Ajpfx Ad Hef Ready for installation or use as a strategic spare part Scope of Supply: - Complete bearings - Original SKF wooden crate - Internal protective packaging

Condition: excellent (used), functionality: fully functional, Large Disa cartridge filter with 32 cartridges and a 22 kW fan moves 10,000 to 16,000 m³ of air with an electronic fire damper. In excellent condition and has always been kept indoors. Extraction system suitable for all types of dust. Still installed, so dismantling must be carried out by the buyer. Hfodeyuzg Tepfx Ad Hef

Year of construction: 2015, condition: good (used), functionality: fully functional, machine/vehicle number: A-150016, AUTOMATED ADHESIVE APPLICATION MACHINE, GANTRY SYSTEMS, AND AUTOMATED METAL INSERT PLACEMENT UNIT This system is part of a larger production line; please refer to our other listings for more information. The offered system includes 3 provision stations for facing sheets, an automated adhesive application machine for sandwich panel bonding, a lay-up conveyor for manual assembly of the inlay/ribbing, gantry systems for manipulating the facing sheets, and an automated placement unit for metal inserts/reinforcement points. COMPONENT DIMENSIONS (from previous production): L/W min: 2000mm x 1500mm L/W max: 8000mm x 2500mm H min: 12mm H max: 60mm MATERIALS (from previous production): GRP, sheet metal, plywood, wood/PU strips, PVC, Styrofoam GLUING GANTRY FOR CONTOUR & SURFACE BONDING (of the facing sheets & inlays): Number of needle valves surface: 104 Number of needle valves contour: 1 Adhesive system: 1K-PUR Number of nozzles in water spray unit: 8 AUXILIARY UNITS: Climate chamber (storage for 1K-PUR adhesive) Vacuum pump for gantry systems Hedpfx Asyt Nm Sod Hsff Punching unit

Year of construction: 2025, condition: new, As the ideal machine for industrial as well as heating and air conditioning installations, the Genie® Superlift Contractor® SLC™-24 material lift comes standard with a fixed outrigging system featuring a patented locking mechanism for additional lateral stability. The unit can be easily operated by a single person to lift, lower, or transport heavy loads. Hjdpfxoyt I Izo Ad Hjff

Year of construction: 2025, condition: new, The manually operated Genie® Superlift® Advantage material lifts offer various load handling options. The Genie® Superlift Advantage™ SLA™-20 is available with a versatile, adjustable pallet base that can handle wide loads as well as narrow doorways and can be loaded onto or into a vehicle in no time at all. Hfodpfx Asyt E Eqjd Hof

Year of construction: 2015, condition: repair required (used), functionality: limited functionality, total length: 13,000 mm, total width: 4,520 mm, total height: 2,550 mm, machine/vehicle number: 201507-025, WATERJET CUTTING MACHINE & BONDING STATION: The system is part of a larger production line; please also refer to our other listings. In this offered system, EPS/XPS raw panels (manually loaded in the feed magazine) are bonded end-to-end into a continuous strand. Subsequently, formatting is carried out with the waterjet cutting machine, including cut-outs and groove milling. An ejector station and belt conveyor at the end of the line are also included in the scope of supply. Hfsdeytp U Ajpfx Ad Hof RAW MATERIAL DIMENSIONS: Length: 1500mm - 2500mm Width: 600mm - 1250mm Height: 20mm - 50mm WATERJET CUTTING MACHINE: cut Expert variojet (Manufacturer: expert international GmbH, formerly expert systemtechnik GmbH) INCLUDES: Adhesive unit (Nordson), milling spindle (Jäger)

Year of construction: 2016, condition: used, functionality: fully functional, Equipment: CE marking, For sale: Professional twin-chamber baler Textile Baler Baling Press by Valvan Baling Systems, model VVH30R-VP. This is a top-quality, European-manufactured machine (production: Belgium), purchased brand new directly from the manufacturer (Year of production: 2016, delivery and first use in 2018). The equipment is in excellent condition, barely used – ready for immediate operation. Why is this offer unique? This is the most fully equipped version of this model available on the market. Unlike standard machines, this unit is fitted with: - an additional pre-compression ram in the loading chamber – drastically increases throughput and operational speed. - rail and trolley for a hanging strapping tool – the suspended bander improves bale strapping efficiency and speeds up operations. Operating principle: Thanks to the dual-chamber rotary (revolver-type) design, the machine ensures continuous operation and high throughput. While one bale is being strapped, the second chamber can already be loaded. It is ideally suited for forming smaller, manageable bales weighing 40–100 kg, making it a perfect solution for companies valuing ergonomics and efficiency. Specifications and features: - Model: Valvan VVH30R-VP - Pressing force: 30 tons - Designed for textile applications - Type: Twin-chamber, rotary (revolver-type) - Colour: Blue (original paint) - Condition: Excellent, as new Hfedpfx Adeyrymto Hof Origin: Belgium (purchased directly from the manufacturer) Please feel free to contact me by phone or arrange a viewing of the machine. This is a rare opportunity to acquire such advanced equipment in virtually factory-new condition.

Year of construction: 2026, condition: new, functionality: fully functional, AVANTECHNO 411 is a professional mobile system for line boring and internal build-up welding, designed for precision restoration of worn cylindrical bores and pivots directly on site. The system integrates boring, internal welding (overlaying), facing, drilling, and thread cutting into a single portable unit. The equipment is mounted directly onto the workpiece, allowing on-site repair without the need for disassembly or transportation of heavy components. The coaxial centering system ensures high concentricity when restoring spaced bores. Technical specifications: - Boring diameter range: Ø 22 – 400 mm (up to 1,000 mm with additional kits) - Internal build-up welding range: Ø 25 – 400 mm - External build-up welding range: Ø 20 – 250 mm - Accuracy: up to 0.01 mm (H7 tolerance field) - Feed rate: 0 – 0.5 mm/rev - Maximum spindle speed: up to 450 rpm - Continuous feed travel: 250 mm (extendable via bar length) - Drive type: DC motor with permanent magnets - Power supply: 220 V / 50 Hz - Maximum power consumption: 3 kW - Operating temperature range: −30°C to +40°C - Weight of electromechanical module: approximately 42 kg Hfodoyq Rldopfx Ad Hef Functional capabilities: - Single-pass coaxial restoration of multiple aligned bores - Internal hole welding with continuous spiral overlay technology - Facing of flanges and mounting surfaces - Restoration of bearing seats and circlip ring grooves - Restoration of blind bores - Quick change of boring bar with welding shaft without the need for re-centering Applications: Suitable for maintenance and repair of: - Excavators, loaders, and construction equipment - Mining machinery and processing equipment - Agricultural machinery - Cranes and lifting equipment - Industrial and heavy mechanical assemblies Advantages: - On-site repair without disassembly - Significant reduction of downtime and transport costs - Compact and portable design - Manufactured in the EU with a 24-month warranty - Engineered for heavy-duty industrial applications