KOB GmbH

Year of construction: 2005, condition: ready for operation (used), A screw compressor Atlas Copco including an air dryer is available. Air volume flow: 5.88m³/min, max. operating pressure: 10bar, motor power: 37kW, speed: 2960rpm, operating hours: approx. 49696h. Including air dryer Atlas Copco FD 95. Documentation available. An on site inspection is possible. Bjdpfx Ahoyq R Ewe Ijwi

Condition: not inspected (used), functionality: unexamined, Year of construction: 2008, controller model: HMI PLC KAESER, pressure (max.): 8.5 bar, rotational speed (max.): 2,965 rpm, TECHNICAL DETAILS Engine speed: 2,965 rpm Maximum operating pressure: 8.5 bar Air dryer Model: ABT 102 Max. operating pressure: 21 bar MACHINE DETAILS Bwjdpfx Ahjyq Hi Ej Ioi Control model: HMI PLC KAESER Motor power: 55 kW Voltage: 400/460 V The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 7549

Condition: like new (used), Compressor, rotary vane compressor, low-pressure gas compressor, gas compressor, Ro-Flo 219M Bodpfx Ahoyn Ridj Iewi Manufacturer: Ro-Flo Compressors, LLC Type: 219M Serial number: 10568-4 -inlet pressure: 2.3 bar (gauge) -maximum pressure: 7.7 bar (gauge) -volumetric flow rate: 955.8 m³/h -operating speed: 275–640 rpm -maximum operating temperature: 176 °C -overall dimensions: 1450 × 690 × 850 mm -weight: approx. 1,341 kg

Year of construction: 2010, condition: ready for operation (used), Air flow rate: 4.22m³/min, max. operating pressure: 12.8bar, motor power: 22kW, weight: approx. 560kg, operating hours: over 61000h. Documentation available. An on-site inspection is possible. Bwsdsyn N A Nspfx Ah Isi

Year of construction: 2007, condition: ready for operation (used), Three Atlas Copco compressors are available. 1) Atlas Copco GA 37 VSD, year of manufacture: 2007, air flow rate: 7.25m³/min, max. operating pressure: 12.8bar, power: 37kW, refrigerant: R404a, weight: approx. 1200kg, operating hours: approx. 120844h. 2) Atlas Copco GA 50 VSD, year of manufacture: 2003, max. operating pressure: 13bar, air flow rate: 9.18m³/min, power: 50kW, refrigerant: R404a, weight: approx. 1300kg, operating hours: approx. 159308h. 3) Atlas Copco GA 30, year of manufacture: 2003, air flow rate: 5.34m³/h, max. operating pressure: 8bar, power: 30kW, refrigerant: R404a, weight: approx. 1000kg, operating hours: approx. 29700h. Documentation available. An on-site inspection is possible. Bwedpfxjyn Nzxe Ah Iji

Year of construction: 2017, condition: ready for operation (used), An oil-lubricated screw compressor Boge including an air dryer unit is available. Tank volume: 350l, motor power: 11kW, max. operating pressure: 8bar, air flow rate: 1810l/min, machine dimensions X/Y/Z: approx. 2000mm/750mm/1400mm, weight: approx. 400kg. An on-site inspection is possible. Bedpsynltkefx Ah Iowi

Year of construction: 2008, condition: not inspected (used), functionality: unexamined, overall weight: 400 kg, total length: 2,200 mm, total height: 1,500 mm, overpressure (max.): 10 bar, rotational speed (max.): 4,860 rpm, machine/vehicle number: 28838, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to prompt collection either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! The system consists of a screw compressor and a refrigerated dryer. Bsdjym Rwfopfx Ah Iswi TECHNICAL DETAILS Motor pressure: 22 bar Overpressure: 10 bar Speed: 4,860 rpm Volume flow: 3.02 m³/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,200 x 860 x 1,500 mm Weight: 400 kg External reference: Pieper - Lot 56

Year of construction: 2020, operating hours: 18,526 h, condition: ready for operation (used), functionality: fully functional, overall weight: 500 kg, operating pressure: 8 bar, rotational speed (max.): 6,500 rpm, machine/vehicle number: API842024, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the machine within the specified period: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Max. pressure: 8 bar Flow rate: 5.1 cm³/min Motor speed: 6,500 rpm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Motor power: 26 kW Bodpfxeym Nqqe Ah Iewi Dimensions & Weight Dimensions (L x W x H): 1,280 x 900 x 1,600 mm Weight: 500 kg Recorded operating hours: 18,526 h External reference: CES - Lot 159

Condition: like new (used), Compressor, rotary vane compressor, low-pressure gas compressor, gas compressor, Ro-Flo 219M Manufacturer: Ro-Flo Compressors, LLC Type: 219M Serial number: 10568-4 -inlet pressure: 2.3 bar (gauge) -maximum pressure: 7.7 bar (gauge) -volumetric flow rate: 955.8 m³/h Bwodsylh Npepfx Ah Iei -operating speed: 275–640 rpm -maximum operating temperature: 176 °C -overall dimensions: 1450 × 690 × 850 mm -weight: approx. 1,341 kg

Condition: like new (used), Compressor, rotary vane compressor, low-pressure gas compressor, gas compressor, Ro-Flo 19LE Manufacturer: Ro-Flo Compressors, LLC Type: 19LE Serial number: 10568-1 -suction pressure: -0.1 bar -maximum pressure: 3 bar -volumetric flow rate: 3,532 m³/h Bwjdpjylcngefx Ah Isi -operating speed: 275–640 rpm -maximum operating temperature: 176 °C -overall dimensions: 2000 × 700 × 900 mm -weight: approx. 2,500 kg

Condition: new, New refrigeration compressor (compressor) from the renowned manufacturer Copeland. Condition: New – warehouse stock (old stock), with no signs of operation. The compressor is factory-prepared, protected, and equipped with safety labels. Identification data (from nameplate): • Manufacturer: Copeland • Type: D3RS/1500/EWM7000 • Catalog number: 606.110.14 • Serial number: 356784 (BBC-YORK) • Design: semi-hermetic • Application: refrigeration / air conditioning system • Configuration: Block 1 • Start-up: U. Direct start (direct-on-line starting) • Equipment: Oil sump heater (Kurbelwannenheizung) Electrical data (from Copeland nameplate): • Power supply: 3~ 50 Hz Bwedjyga Utspfx Ah Ioi • Speed: 1,450 rpm • Volumetric capacity: 49.90 m³/h • Voltage: 380–420 V (Y) • Starting current (LRA): 117–129 A • Max. operating current (MRA): 28.8 A • Max. working pressure H/L: 25 / 20.5 bar • Test pressure H/L: 27.5 / 22.6 bar • Degree of protection: IP54 • Year: 1996 Oil (recommended): • Mineral: Fuchs KM / Suniso 3 GS / Capella WF 32 / Shell 22-12 The compressor is ideal as a new replacement part, for modernization of refrigeration or air-conditioning installations. Sale as shown in the pictures.

Year of construction: 2022, condition: ready for operation (used), Two ALUP compressors including two heat exchangers are available. Operating pressure: 7bar, max. pressure: 13bar, max. inlet temperature: 55°C, power range: 11kW-30kW, refrigerant: R513A, refrigerant quantity: 500g, weight: approx. 290kg. Documentation available. An on site inspection is possible. Bwodpsycwr Uofx Ah Iei

Year of construction: 2023, condition: new, functionality: fully functional, Screw compressor model: UVG30-20.5WG-INV (WP-SF-BV-CM-BY2-PL-PB) Ex Medium: Biogas Electrical power: 37 kW Operating pressure: 20 bar g Inlet pressure: 0.003–0.15 mbar (g) Volume flow: 104 Nm³/h Bodpfx Ahox R Tuco Iewi max. H2S concentration:

Year of construction: 1994, condition: ready for operation (used), A small compressor system including separator, dryer and tank is available. 1) Compressed air receiver MetaCon, year of manufacture: 1994, nominal volume: 1000l, operating temperature range: -10°C/50°C, max. operating overpressure: 11bar. 2) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 3) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 4) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible. Bsdpox Ih D Tofx Ah Ijwi

Year of construction: 2015, condition: ready for operation (used), Operating pressure: 10bar, max. temperature: 40°C, cooling medium: R134A, quantity: approx. 500g, weight: approx. 450kg. An on site inspection is possible. Bwedpsxxzibsfx Ah Ioi

Condition: ready for operation (used), An Atlas Copco piston compressor is available. Motor power: 4kW, max. operating pressure: 11bar, intake capacity: approx. 633l/min, delivery rate at 7bar: approx. 412l/min, speed: 1000rpm, tank capacity: 270l. Machine dimensions: approx. 1500mm/500mm/1200mm, weight: approx. 125kg. Documentation available. On-site inspection possible. Bwjdpfxsxuvpne Ah Isi

Year of construction: 2001, condition: ready for operation (used), Two identical Blitz compressors are available. Motor power: 22kW, max. operating pressure: 10bar, flow rate: 3m³/min, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Bwjdpfxoxtfg Hs Ah Iei

Year of construction: 2002, condition: ready for operation (used), Two compressors Kaeser are available. 1) Kaeser CSD 102 T SFC, year of manufacture: 2002, rated power: 55kW, max. operating pressure: 8.5bar, refrigerant: R134a, refrigerant quantity: 3.1kg, operating hours: approx. 132150h, load hours: approx. 129858h. 2) Kaeser BS 61, year of manufacture: 2001, rated power: 31kW, max. operating pressure: 8bar, operating hours: 91889h, load hours: 78711h. Documentation available. An on-site inspection is possible. Bwodpjxph Nvofx Ah Iji

Year of construction: 2008, condition: ready for operation (used), Operating pressure: 13bar, volume flow: 17.07m³/min, motor power: 90kW, motor speed: 3480rpm, weight: approx. 1750kg. The frequency converter of the machine is defective. An on-site inspection is possible. Bedoxmkc Tspfx Ah Iewi

Condition: like new (used), Year of construction: 2023, operating hours: 2,500 h, functionality: fully functional, overall weight: 1,081 kg, power: 75 kW (101.97 HP), volume flow: 1,500 m³/h, operating pressure: 13 bar, We have two Atlas Copco compressors and one oxygen generator type Oxymat ( Oxygen PSA. ) Hopefully the equipment will be sold together. Detailed description in documents attached. But we can say that the two compressors will have a capacity of 798 Nm3 each and the PSA can produce approx 250Nm3 oxygen per hour with purity of 93% +-1% Bwsdpfx Aoxhdb Sjh Ioi

Year of construction: 2007, condition: ready for operation (used), Rated power: 75kW, max. operating overpressure: 8.5bar, speed: 3000rpm, operating hours: 75122h, load hours: 72719h. The machine requires bearing replacement. Documentation available. An on-site inspection is possible. Bwodpfxsxf Ikxe Ah Iei

Year of construction: 2008, condition: ready for operation (used), 1) Reciprocating compressor Prematic PAKO 1201/270, year of manufacture: 2008, displacement: 1200L/min, flow rate: 925L/min, tank volume: 270L, speed: 700rpm, power: 7.5kW, operating pressure: 10bar, operating hours: approx. 5257h. 2) Screw compressor Atlas Copco GA7FF, year of manufacture: 1999, operating pressure: 8bar, flow rate: 1092L/min, power: 7.5kW, speed: 3000rpm, weight: approx. 250kg, operating hours: 14057h. Documentation available. An on-site inspection is possible. Bwodpfx Ahexf Iinj Iei

Year of construction: 2020, condition: ready for operation (used), A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range: 2-6 compressors. Oil-water separation system Beko ÖWAMAT 15, throughput range: 6m³-30m³/min, oil outlet: DN40, container volume: 115.5l, filling volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16bar, machine dimensions X/Y/Z: approx. 1100mm/550mm/800mm, weight: approx. 40kg. System operating hours: 8656h, controller hours: 42334h. Documentation available. An on-site inspection is possible. Bedpfx Ahjxdc Uve Ijwi

Year of construction: 2012, condition: ready for operation (used), A total of 7 L-Unite Hermetique (Tecumseh) compressors including Johnson Controls pressure regulators and 6 Bitzer heat exchangers are available. 1) Tecumseh TAG4546Z compressor, year of manufacture: 2012, max. operating overpressure: 20 bar, test pressure: 25 bar. 2) Heat exchanger Bitzer K123H, year of manufacture: 2012, refrigerant volume: 5.1l, cooling medium volume: 0.9l, max. pressure refrigerant/cooling medium: 33bar/10bar, max. temperature refrigerant/cooling medium: 120°C/95°C, min. temperature: -10°C. 3) Pressure regulator Johnson Controls P78LCW 9300, documentation available. On-site inspection is possible. Bjdpewzx T Ejfx Ah Iewi

Condition: new, Compressor Dorin H392CS Bwjdpfjwyv Dxex Ah Isi Compressor Dorin H392CS, LBP - R404A, R407C, R507, HBP - R134a, 380-400V/3/50Hz, discharge: 23.31 m3/h, cylinders: 2, oil charge: 1.4 kg connection - suction: 2 8s mm, discharge: 16s mm, Net weight - 50 kg In stock - 2pcs