Cm Commercio Macchinari S.r.l.

Year of construction: 1996, condition: good (used), functionality: fully functional, machine/vehicle number: nieznany, in continuous production until 30.04.2026 Hsdpfx Afeyybtlepsk Technical specifications • Machine type: automatic screen printing line • Application: decoration of packaging glass (HORECA, breweries, spirits) • Number of colours: multicolour (configuration depends on setup – 8 stations, 8 colours) • Production speed: up to approx. 50 pcs/min (depending on decoration and glass) • Type of decoration: ceramic / organic inks • Transport system: automated transfer between stations • Heated squeegee: heated squeegee system • Vacuum: support via vacuum system

Year of construction: 2022, condition: good (used), functionality: fully functional, machine/vehicle number: P0000581, Bonding device from Alba Industries GmbH, used as a parts dispenser 24VDC / pneumatic. Includes extensive components from Festo, Norelem, Item, Gutekunst, Beham, Igus, ACE, Storz, Elesa & Ganter, Steyr-Werner, etc. Hodpfx Aeyybitsfpok Bill of materials of the installed elements see attached PDF. EPlan and pneumatic diagrams are available and can be viewed upon request and on-site appointment.

Year of construction: 2002, condition: used, functionality: fully functional, 2 level conveyor system to deliver materials from Warehouse to production and back to warehouse. Hjdpfx Aoyx Dd Rsfpek

Year of construction: 2023, condition: like new (used), functionality: fully functional, This specialized automatic machine is purpose-built for processing parallel twin wires, offering integrated cutting, stripping, wire splitting, and simultaneous dual terminal crimping within a fully automated cycle. The advanced splitting mechanism automatically separates both conductors of parallel twin cables and ensures precise terminal crimping at each wire end, all in one operation. Hsdpeyxy Nvofx Afpek Engineered for high-throughput parallel wire processing, this machine significantly boosts productivity by crimping both separated wire ends at the same time, rather than consecutively. Its innovative dual-head crimping system allows simultaneous application of terminals, effectively doubling production output compared to single-wire machines. The adaptable modular design supports a broad range of parallel wire sizes and terminal types via quick-change tooling. Operators can efficiently switch between different wire gauges and terminal configurations by simply exchanging the appropriate splitting dies and crimping applicators, supporting flexible and efficient production across a variety of product lines. An advanced touchscreen interface provides independent module control, enabling features such as selective operation for single-end crimping or opposite-end stripping. The built-in program memory stores processing recipes for various twin-wire products, allowing immediate parameter recall during product changes for reduced setup time and enhanced workflow efficiency. New price: nearly €40,000 The machine has been used but is in perfect working condition, as new.

Condition: ready for operation (used), operating hours: 2,880 h, functionality: fully functional, DrDryice The C500 is an older model, but it has proven to be a strong, durable, and reliable workhorse. Engineered with robust industrial construction, this machine continues to deliver consistent performance and is ideal for companies seeking a low-investment solution for dry ice pellet production. Machine hours: 2,880 h •⁠ ⁠Includes 3 mm die plate •⁠ ⁠Minimum production capacity: 100 kg/h •⁠ ⁠Solid, heavy-duty construction •⁠ ⁠Proven reliability Hodpfx Aoyxxgasfpek Worldwide shipping available. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blaster, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: used, Year of construction: 2014, functionality: fully functional, pressure: 8 bar, temperature: 20 °C, type of input current: three-phase, input voltage: 400 V, overall weight: 1,250 kg, usable tank capacity: 90 l, rotational speed (max.): 758 rpm, Equipment: rotational speed infinitely variable, We are offering this used RESPECTA DB13A/20-30L mixing and stirring unit, year of manufacture 2014. Manufacturer: RESPECTA Model: DB13A/20-30L Year: 2014 Condition: used Machine type: Mixing and Stirring Unit Weight: 1,250 kg Voltage: 400 V Frequency: 50 Hz CE safety standards The machine is in perfect working condition. This machine can also be purchased together with other units for a complete production line. Technical Details - Mixing Unit: The mixing unit is designed for blending dry fillers with liquids. Maximum filler particle size: 2mm Mixture output rate: approx. 20 – 30 l/min Mixing tool: single-flight mixing screw, left-handed, equipped with wear-protection coating, robust cylinder design with high surface hardness Drive: 3-phase motor, 4 kW – 379 rpm, 400V / 50 Hz Speed range: adjustable from 0 to 758 rpm Screw overload protection: set at 80% of the rated current Quantity adjustment: potentiometer, stepless, without altering the mixing recipe Technical Details - Binder Premixer: Dynamic mixing of pure liquids without any solid content. Mixing performance: max. 5 l/min Mixing tool: single-flight mixing screw, left-handed System materials: stainless steel, Viton, PTFE Drive: three-phase motor, 0.55 kW, 2830 rpm, 230-400 V / 50 Hz Pressure monitoring: S-11 pressure transmitter, 0-4 bar G ½" Pressure display: control terminal at switch cabinet Technical Details - Filler Dosing System: Four dosing systems for volumetric dosing of free-flowing, non-bridging dry fillers. The dosing units are interchangeable with identical units and secured with quick-release clamps. All dosing units are equipped with level sensors. For fine fillers, a horizontal agitator is integrated in dosing unit 2 to prevent bridge formation as much as possible. Fillers with max. grain size 2mm Dosing rate: approx. 2 – 10 l/min Dosing tool: single-flight spiral, left-handed Hjdsyxg Dgspfx Afpek Dosing drive: geared motor, 0.75 kW – 91 rpm, 230-400 V / 50 Hz Speed control: frequency converter – 0.75 kW – 230 V / 50 Hz Speed range: adjustable from 0 to 182 rpm Quantity adjustment and display: control terminal at switch cabinet Storage vessel Capacity: approx. 90 l (4x) Technical Details - Resin Dosing System: Pump unit for volumetric dosing of pure liquids without admixtures of solid or reactive substances. Dosing rate: approx. 400 – 2000 ml/min Viscosity at 20°C: approx. 2,000 mPas Pump type: gear pump Pump pressure: max. permitted 8 bar Drive: three-phase geared motor, 0.37 kW – 291 rpm, 230–400 V / 50 Hz Speed control: frequency converter – 0.75 kW – 230 V / 50 Hz Speed range: adjustable from 0 to 582 rpm Quantity adjustment and display: control terminal at switch cabinet Dismantling and removal at buyer's own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please feel free to send us a message or give us a call.

Year of construction: 2010, condition: good (used), Extra-large Induction Heater A comprehensive range for bearings up to 1200 kg The SKF TIH L series induction heaters are distinguished by their high heating capacity and large dimensions. They extend the TIH range to include the heating of larger bearings. All heaters are equipped with sliding yokes, two induction coils, and state-of-the-art power electronics. The heater frame allows for easy transport with a forklift. The main differences within the TIH L series are heating output and application range. Power control allows precise adjustment of the temperature increase rate. With a power demand of 20 kVA, the TIH L series heaters can heat even large bearings with a maximum weight of 1,200 kg. Automatic demagnetization reduces contamination risk from metallic residues or abrasion after heating. An overheat protection system minimizes the risk of damage to the induction coils and electronics, improving safety and reliability. Available with three operating ranges. The units are offered for the three most common international supply voltages. Rolling bearings can be heated vertically or horizontally. Hodjyw Tvgspfx Afpek

Condition: not inspected (used), functionality: unexamined, ⚠️ Important Notice: For Business Customers Only (B2B) This sale is exclusively intended for entrepreneurs as defined by § 14 BGB (commercial operators, self-employed persons, freelancers). Sale to private individuals (consumers) is excluded. By submitting a bid or making a purchase, you expressly confirm your status as a business entity and that the acquisition is for your commercial or self-employed professional activities. _____ For sale is a strip coating line. The system originates from insolvency assets and was in successful operation until the facility was closed. Technical specifications & capacities: Hodjyw Hiyopfx Afpek • Material: Suitable for aluminum and stainless steel coils. • Strip width: 80 mm up to max. 600 mm. • Material thickness: 0.1 mm to 2.0 mm (for aluminum). • Processing speed: approx. 20–25 m/min. • Coil weight: Max. 3,000 kg. • Inner diameter: 400 mm (expandable to 500 mm with available adapter chucks). • Coating options: From narrow color stripes (starting at 7 mm) up to full-surface coating. • Temperature range: Oven operation at approx. 250°C. System design & components: • Infeed: Expandable decoiler with height-adjustable coil transport cart (load capacity 3,000 N). • Coating unit: Double coater for precise paint application using steel roll deflection. • Drying: Drying and firing zone with two Eclipse gas burners and control panel. • Safety & Environment: FID probe for continuous monitoring of solvent concentration in the oven, including control unit. • Cooling: Cooling section with fresh air supply before exiting the oven. • Post-processing: Integrated slitting device for strip longitudinal cutting (incl. slitting knives and spacer rings). • Outfeed: Hydraulic strip guiding, friction plate brake, and transfer arms at the recoiler. Scope of delivery: • Complete system as described. • Accessories (spacer rings, slitting knives, adapter chucks). Inspection & transaction: • Condition: Used, fully operational up to decommissioning. • Location: Wuppertal. • Dismantling/transport: Dismantling and transport to be carried out by the buyer at their own expense. • Invoice: You will receive a proper invoice with VAT shown separately. Terms of sale and delivery: • Condition: The system is sold as is from its current location. • Disclaimer: As this is a B2B transaction between professionals, the sale is made to the exclusion of any warranty and guarantee. • Inspection: On-site inspection is expressly recommended.

Condition: used, SKF 23996 CA/W33 Spherical Roller Bearings – Used – Excellent Condition – 2 pcs Available: 2 SKF spherical roller bearings, model 23996 CA/W33, sourced from an industrial plant and fully operational. These are high-quality components, suitable for heavy-duty applications and ideal as immediate replacement parts. Hodpfxeyu Rm Aj Afpok Technical Specifications: - Brand: SKF - Model: 23996 CA/W33 - Type: Spherical Roller Bearing - Cage: CA (solid brass) - Lubrication: W33 (lubrication groove and holes) - High radial and axial load capacity Suitable for: - Industrial gearboxes - Hoisting/lifting systems - Steel plants and cement works - Heavy-duty machinery - Pumping and snowmaking installations Condition: - Used, but in excellent working condition - Removed from a functioning plant - Raceways and rollers in very good shape (see photos) - Protective grease applied - No significant oxidation or visible damage - Stored in original SKF crate Ready for installation or use as a strategic spare part Scope of Supply: - Complete bearings - Original SKF wooden crate - Internal protective packaging

Condition: excellent (used), functionality: fully functional, Large Disa cartridge filter with 32 cartridges and a 22 kW fan moves 10,000 to 16,000 m³ of air with an electronic fire damper. In excellent condition and has always been kept indoors. Extraction system suitable for all types of dust. Still installed, so dismantling must be carried out by the buyer. Hjdpfx Aoyuzg Tjfpek

Year of construction: 2015, condition: good (used), functionality: fully functional, machine/vehicle number: A-150016, AUTOMATED ADHESIVE APPLICATION MACHINE, GANTRY SYSTEMS, AND AUTOMATED METAL INSERT PLACEMENT UNIT This system is part of a larger production line; please refer to our other listings for more information. The offered system includes 3 provision stations for facing sheets, an automated adhesive application machine for sandwich panel bonding, a lay-up conveyor for manual assembly of the inlay/ribbing, gantry systems for manipulating the facing sheets, and an automated placement unit for metal inserts/reinforcement points. Hedpfx Afsyt Nm Sopok COMPONENT DIMENSIONS (from previous production): L/W min: 2000mm x 1500mm L/W max: 8000mm x 2500mm H min: 12mm H max: 60mm MATERIALS (from previous production): GRP, sheet metal, plywood, wood/PU strips, PVC, Styrofoam GLUING GANTRY FOR CONTOUR & SURFACE BONDING (of the facing sheets & inlays): Number of needle valves surface: 104 Number of needle valves contour: 1 Adhesive system: 1K-PUR Number of nozzles in water spray unit: 8 AUXILIARY UNITS: Climate chamber (storage for 1K-PUR adhesive) Vacuum pump for gantry systems Punching unit

Year of construction: 2025, condition: new, As the ideal machine for industrial as well as heating and air conditioning installations, the Genie® Superlift Contractor® SLC™-24 material lift comes standard with a fixed outrigging system featuring a patented locking mechanism for additional lateral stability. The unit can be easily operated by a single person to lift, lower, or transport heavy loads. Hodoyt I Izspfx Afpsk

Year of construction: 2025, condition: new, The manually operated Genie® Superlift® Advantage material lifts offer various load handling options. The Genie® Superlift Advantage™ SLA™-20 is available with a versatile, adjustable pallet base that can handle wide loads as well as narrow doorways and can be loaded onto or into a vehicle in no time at all. Hjdjyt E Eqepfx Afpek

Year of construction: 2015, condition: repair required (used), functionality: limited functionality, total length: 13,000 mm, total width: 4,520 mm, total height: 2,550 mm, machine/vehicle number: 201507-025, WATERJET CUTTING MACHINE & BONDING STATION: The system is part of a larger production line; please also refer to our other listings. In this offered system, EPS/XPS raw panels (manually loaded in the feed magazine) are bonded end-to-end into a continuous strand. Subsequently, formatting is carried out with the waterjet cutting machine, including cut-outs and groove milling. An ejector station and belt conveyor at the end of the line are also included in the scope of supply. RAW MATERIAL DIMENSIONS: Length: 1500mm - 2500mm Width: 600mm - 1250mm Height: 20mm - 50mm WATERJET CUTTING MACHINE: cut Expert variojet (Manufacturer: expert international GmbH, formerly expert systemtechnik GmbH) Hodpfjytp U Aex Afpok INCLUDES: Adhesive unit (Nordson), milling spindle (Jäger)

Year of construction: 2016, condition: used, functionality: fully functional, Equipment: CE marking, For sale: Professional twin-chamber baler Textile Baler Baling Press by Valvan Baling Systems, model VVH30R-VP. This is a top-quality, European-manufactured machine (production: Belgium), purchased brand new directly from the manufacturer (Year of production: 2016, delivery and first use in 2018). The equipment is in excellent condition, barely used – ready for immediate operation. Why is this offer unique? This is the most fully equipped version of this model available on the market. Unlike standard machines, this unit is fitted with: - an additional pre-compression ram in the loading chamber – drastically increases throughput and operational speed. - rail and trolley for a hanging strapping tool – the suspended bander improves bale strapping efficiency and speeds up operations. Operating principle: Thanks to the dual-chamber rotary (revolver-type) design, the machine ensures continuous operation and high throughput. While one bale is being strapped, the second chamber can already be loaded. It is ideally suited for forming smaller, manageable bales weighing 40–100 kg, making it a perfect solution for companies valuing ergonomics and efficiency. Specifications and features: - Model: Valvan VVH30R-VP - Pressing force: 30 tons - Designed for textile applications - Type: Twin-chamber, rotary (revolver-type) - Colour: Blue (original paint) Hodpfx Aoyrymtjfpsk - Condition: Excellent, as new Origin: Belgium (purchased directly from the manufacturer) Please feel free to contact me by phone or arrange a viewing of the machine. This is a rare opportunity to acquire such advanced equipment in virtually factory-new condition.

Year of construction: 2025, operating hours: 300 h, condition: new, functionality: fully functional, We offer delivery and installation of the equipment in countries within the European Union. We can also provide videos demonstrating the equipment in operation. 6 Seats – Fully Installed – Ready for Use Price USD 24,500 Turnkey 5D Cinema Attraction, Ready for Operation A fully operational 6-seat 5D motion cinema system, manufactured by Movie Power Company Ltd. (China), is available for sale. Hodpfx Afjyrig Ajpok The system is already imported into the European Union (Bulgaria), installed, tested, and functioning. Live demonstrations on site are available. This enables the buyer to begin operating immediately, without any waiting period for production or international shipping. Key Benefit for the Buyer The system is already imported into the EU, saving the buyer significant costs and time associated with: • International shipping • Customs clearance • Import duties • Delivery lead time (typically 2–3 months) All these expenses have been covered by the seller. Manufacturer The equipment is produced by Movie Power Company Ltd., one of the leading Chinese manufacturers of motion cinema and immersive entertainment systems. Their installations operate globally in: • Theme parks • Amusement parks • Shopping malls • VR arcades • Entertainment centers Included Equipment The system is a complete turnkey 5D cinema attraction, comprising: • 6 motion simulator seats (two 3-seat platforms) • Dual Epson projection system • 3D metal projection screen (16:9) • Cinema control system • Professional audio system • 20 pairs of 3D glasses • 60 HD 5D movies Special Effects The cinema includes synchronized environmental effects: • Wind • Rain • Snow • Bubbles • Lightning • Smoke • Vibration • Leg sweep • Back push • Ear blowing • Back poke These effects deliver a fully immersive cinema experience. Space Requirements Approximate installation area: 6 m × 4 m × 3.5 m height Warranty The equipment is still covered by the manufacturer’s warranty.

Year of construction: 2026, condition: new, functionality: fully functional, AVANTECHNO 411 is a professional mobile system for line boring and internal build-up welding, designed for precision restoration of worn cylindrical bores and pivots directly on site. The system integrates boring, internal welding (overlaying), facing, drilling, and thread cutting into a single portable unit. The equipment is mounted directly onto the workpiece, allowing on-site repair without the need for disassembly or transportation of heavy components. The coaxial centering system ensures high concentricity when restoring spaced bores. Technical specifications: - Boring diameter range: Ø 22 – 400 mm (up to 1,000 mm with additional kits) - Internal build-up welding range: Ø 25 – 400 mm - External build-up welding range: Ø 20 – 250 mm - Accuracy: up to 0.01 mm (H7 tolerance field) - Feed rate: 0 – 0.5 mm/rev - Maximum spindle speed: up to 450 rpm - Continuous feed travel: 250 mm (extendable via bar length) - Drive type: DC motor with permanent magnets - Power supply: 220 V / 50 Hz - Maximum power consumption: 3 kW - Operating temperature range: −30°C to +40°C - Weight of electromechanical module: approximately 42 kg Functional capabilities: - Single-pass coaxial restoration of multiple aligned bores - Internal hole welding with continuous spiral overlay technology - Facing of flanges and mounting surfaces - Restoration of bearing seats and circlip ring grooves - Restoration of blind bores - Quick change of boring bar with welding shaft without the need for re-centering Applications: Hodoyq Rldopfx Afpjk Suitable for maintenance and repair of: - Excavators, loaders, and construction equipment - Mining machinery and processing equipment - Agricultural machinery - Cranes and lifting equipment - Industrial and heavy mechanical assemblies Advantages: - On-site repair without disassembly - Significant reduction of downtime and transport costs - Compact and portable design - Manufactured in the EU with a 24-month warranty - Engineered for heavy-duty industrial applications

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: DC, input voltage: 220 V, overall weight: 50 kg, warranty duration: 24 months, AVANTECHNO 611 is a heavy-duty mobile line boring and internal welding system, designed for precise on-site restoration of worn cylindrical bores and pivot joints. The machine combines boring, internal welding, facing, drilling, and thread cutting in a single portable unit. It mounts directly onto the workpiece, allowing repairs without dismantling heavy components, while maintaining precise coaxial alignment of multiple bores. Technical specifications: - Boring diameter range: Ø 62 – 600 mm (Ø 32 – 1,000 mm with additional kits) - Internal welding range: Ø 350 – 1,000 mm - Accuracy: up to 0.01 mm (H7 tolerance) - Feed rate: 0 – 0.5 mm/rev - Maximum bar rotation speed: up to 300 rpm - Continuous feed travel: 300 mm (extendable) - Drive type: DC motor with permanent magnets - Power supply: 220 V / 50 Hz - Maximum power consumption: 2.5 kW - Weight of electromechanical unit: approximately 50 kg Applications Suitable for repairing: - Excavators and construction machinery - Mining and industrial equipment - Agricultural machinery - Cranes and lifting equipment - Heavy-duty mechanical assemblies Advantages: Hjdpfxoyq Rivs Afpjk - On-site repair without disassembly - Reduced downtime and transport costs - Portable and robust construction - Manufactured in the EU with a 24-month warranty - Designed for heavy industrial applications

Year of construction: 2007, condition: used, functionality: fully functional, Hello, Hsdpfoym Uubox Afpjk we are selling our epoxi mixer and applicator Wagner colora. The machine is in working condition but it needs some cleaning and small repairs. We use it for the mixing of the A component Tenax RESINA 5030 and B component Indurente BB30H and use it for the stone slabs reinforcement. The machine is mounted on the mobile steel plate with wheels. For the working it needs 2x 240V power supply for the heating belt for both components and compressed air for working. In the offer is also a lot of spare parts like an extra application gun, a lot of mixers for the resin, one way valves, set of gaskets for the both dosing cylinder. I can send an video of working. Best regards,

Year of construction: 2015, condition: excellent (used), Spectra-Physics Spirit Dual Frequency Femtosecond Laser High Q Laser GmbH p/n: 06900 fR Rack LCR1 Hjdpfx Aeym Dtajfpjk Used, device is in very good condition. Removed from "blue chip" pharma company in Cork, IE. Sold as seen

Year of construction: 2021, operating hours: 22 h, condition: used, functionality: fully functional, machine/vehicle number: 2100034498, Industrial microwave device see the manual for detalis (uploaded document) Hjdpsymzkisfx Afpek

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, Industrial conveyor dryer TESOMA DryTech designed for textile screen printing production lines. This conveyor dryer is suitable for drying inks in screen printing, textile printing and industrial printing applications. Technical specifications: Total length: 7.5 m Conveyor belt width: 900 mm Year of manufacture: approx. 2008 Electric heating system Heavy-duty industrial construction Continuous conveyor drying system Technical condition: Conveyor belt running smoothly Hjdpeympzijfx Afpek Heating elements working Fans operational Control panel active (indicator lights functional) Machine tested after purchase – confirmed working The machine is complete and ready for transport and installation. Video of the machine in operation is available upon request. Location: Poland Incoterms: EXW Poland International transport can be arranged. Price: €19,900 (negotiable)

Year of construction: 2014, condition: used, functionality: fully functional, machine/vehicle number: P3165, We are offering this used Somont / Meyer Burger Stringer CCS Smartwire P3165, year of manufacture 2014. For stringing silicon PV (photovoltaic) cells using the Smartwire principle. Footprint: Width: 2.5 m Can be disassembled into 3 sections: length 4 m + 4 m + 2.5 m = total length 10.5 m The machine was operational at our facility prior to decommissioning and was producing strings. Documentation such as electrical schematics, etc., is available. Type: Stringer Smartwire Production No.: P3165 Serial No.: 14-____ Year of manufacture: 2014 Phases: 3 Hedjymfviepfx Afpek Voltage: 400 V Frequency: 50 Hz Apparent power: 17 kVA Current: 24.5 A Power factor: 0.8 Air pressure: 6 bar Air consumption: 985 l/min If you have any questions or require further information, please feel free to send us a message or give us a call.

Year of construction: 2017, operating hours: 100 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: PL1500-12-REV, High frequency welding machine Hjdpfxoymdzkj Afpjk Year of construction 2017 Full Review Year 2026 Power 12KW Electrode 20x1200mm 150cm of arm Large material tank Low pressure system for operator hand safety Back mass plate to the electrode 3 thrust cylinders Automatic adjustment Shielded electrode holder for radio frequency output Triode ITL9-1 tested and fully functional (12 months warranty) User manual 12 months warranty

Year of construction: 2023, condition: excellent (used), machine/vehicle number: 0293, We are selling the test bench from the aircraft manufacturing sector. Hodpeyl S Euofx Afpek