Estro Systems

Condition: ready for operation (used), Year of construction: 1979, Immediately available ex-location: Hydraulic high-speed press Lauffer Type EPT 25 Dodpfxezb Dflo Aqcoch Year of manufacture: 1979 Inspected according to UVV Press force 25 t Stroke 160 mm Installation height 320 mm Throat depth 230 mm Table 500 x 360 mm Ram 250 x 210 mm Weight 2 t Drive power 7.5 kW Price: EUR 2,750 plus VAT, ex-location.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 80 t, stroke length: 350 mm, table width: 1,400 mm, table length: 840 mm, oil tank capacity: 230 l, total width: 1,600 mm, total height: 3,600 mm, overall weight: 8,000 kg, Equipment: CE marking, safety light barrier, NEW EXNER hydraulic testing press, type PG 80 Number of press cylinders: 2 Nominal force (adjustable): 2 x 400 kN Retraction force: 2 x 150 kN Ram stroke: 350 mm Ram width: 1400 mm Ram depth: 840 mm Guide length: 750 mm Ram speed, load up to 100%: approx. 0-10 mm/s Dodpfx Aqsza Em Ujcjch Ram speed, retraction: approx. 0-20 mm/s T-slots, table/ram according to DIN 650 = 22 mm Installation height – stroke at top: 600 mm Table width: 1400 mm Table depth: 840 mm Column clearance, front: 1000 mm Column clearance, side: 600 mm Table height above floor: 1100 mm Nitrodyne control / retraction, spring force to be compensated under spring tools: max. 150 kN Accuracy: Maximum deviation of plan parallelism from the ram surface to the table surface (from right to left) in free travel (absolute) < 0.05 mm in eccentric loading with maximum force (absolute) < 0.10 mm Table/ram deflection at nominal force and 2/3 surface coverage: 0.10 mm Starting accuracy U.T. without mechanical depth stop: ± 0.05 mm Optionally, a servo roll feed can be offered and installed.

Condition: good (used), Year of construction: 1990, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm Dodpfoza Ap Hjx Aqcsch

Condition: refurbished (used), Year of construction: 1997, machine/vehicle number: 4290, functionality: fully functional, pressing force: 30 t, stroke length: 300 mm, table width: 440 mm, table length: 320 mm, total height: 2,750 mm, Fully refurbished Schoen double-column press, manufactured in 1997/2025. Press force: 300 kN Installation height: 500 mm Stroke: 300 mm Table: W x D 440 x 320 mm Machine will be fully refurbished: - new control system - new light curtain - hydraulic system overhaul. Dsdpfey Uv T Aox Aqcoch

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Dedpoy Uiyvofx Aqcsch Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: excellent (used), functionality: fully functional, pressing force: 2,000 t, stroke length: 250 mm, table width: 1,000 mm, table length: 800 mm, 2000 tons hydraulic press 4-columns Table 800x1000 mm Dedpfx Aqoy Sz Rhscjch Stroke 250 mm

Condition: excellent (used), table width: 700 mm, table length: 1,000 mm, LAUFFER PRESSES hydraulic press model VA 400 Capacity 400 tons Table 700x1000 mm Dodjy Szwnopfx Aqcsch

Condition: good (used), Year of construction: 2002, FOR SALE Double Crank Press ARISA 630 Tons Brand: ARISA (Spain) Model: S2-630-350-150-ES Year of Manufacture: 2002 Type: Double crank mechanical press (S2) – High performance Technical Specifications (Certified Data): This press is a heavy-duty production unit designed for extremely high precision on large workpieces. Nominal Force: 630 tons (6,300 kN) Table Dimensions: 3,500 mm x 1,500 mm Slide Dimensions: 3,500 mm x 1,500 mm Slide Stroke: 200 mm Slide Adjustment: 150 mm Working Speed: Variable from 20 to 50 strokes/minute Maximum Force Point: 13 mm before the bottom dead center Electrical & Mechanical Specifications: Motor Power: 92 kW Total Machine Weight: 145,000 kg (145 tons) Striking Energy: Ideal capacity for deep drawing and progressive cutting applications Clutch/Brake System: Pneumatic (required pressure 5.5 – 6 bar) Balancing: Adjustable pneumatic counterbalance Power Supply: 380 V Dcjdsy Sl Rlspfx Aqcoh Key Features: Large Working Area: 3.5-meter table allows for complex or multiple tooling setups S2 Stability: Double crank design ensures uniform pressure distribution, preventing slide tipping Condition: 2002 machine compliant with modern safety and control standards.

Condition: used, Year of construction: 1997, Pressure 500 t distance between columns 1550 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1200 x 1300 mm pressure of drawing cushion in table 250 t stroke of drawing cushion in table 150 mm die cushion area 950 x 950 mm table height over floor 1245 mm side window 1250 mm ram surface 1200 x 1300 mm Dodpfx Aey Rutmsqcoch speed down 750 mm/s speed up 780 mm/s working speed 105 mm/s oil volume 4000 l power requirement 263,0 kW weight 45,0 t Dimensions (WxDxH) 3,3 x 3,3 x 6,1 m height over floor 6,1 m YOM 1978 - overhaul 1997 with oil-hydraulic drive, hydraulic drawing cushion in table, pneumatic ejector in ram (0,5 t), cutting impact cushioning with depth stop (motoric adjustable), mechanical ram interlocking in TDC as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1988, Pressure 315 t distance between columns 1350 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1200 x 1300 mm table height over floor 1245 mm Dsdpfx Aqjy Rutgecjch side window 1250 mm ram surface 1200 x 1300 mm speed down 750 mm/s speed up 680 mm/s working speed 180 mm/s oil volume 2000 l power requirement 150,0 kW weight 35,0 t Dimensions (WxDxH) 3,3 x 3,3 x 5,5 m height over floor 5,5 m with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning with depth stop (motorized adjustment), hydraulic ram interlocking as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1988, pressure 160 t distance between columns 880 mm stroke 150 mm distance table/ram, max. stroke up, adjustment up 530 mm table surface area 830 x 1000 mm hole in the table 260 x 360 mm table height over floor - 850 mm side window 610 mm ram surface 830 x 1000 mm power requirement 55,0 kW weight 14,7 t Dimensions (WxDxH) 2,2 x 2,0 x 4,3 m with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in ram (50 t / 10 mm), hydraulic cutting impact cushioning, motoric adjustable depth stop, motoric adjustable table, two-hand operation Dcedpfsy Ruq Esx Aqcjh No foundation pit necessary

Condition: ready for operation (used), Year of construction: 1973, machine/vehicle number: 22123, functionality: fully functional, pressing force: 315 t, table width: 1,500 mm, table length: 2,500 mm, TECHNICAL DETAILS Djdpfxoy Nbtks Aqcsch Pressing force: 315 t Table width: 1,500 mm Table length: 2,500 mm Max. working area: 883 mm MACHINE DETAILS Dimensions: 3.0 m x 1.6 m x 4.5 m EQUIPMENT Separate hydraulic power unit Control panel

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Safety distance: 100mm Post-travel: max. 10 mm Motor power: 3 kW Djdpfxsy H Ibve Aqcech

Condition: like new (used), Year of construction: 2008, machine/vehicle number: 461/08, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, pressing force: 400 t, stroke length: 250 mm, operating speed: 320 mm/s, reverse speed: 280 mm/s, table width: 450 mm, table length: 450 mm, table height: 320 mm, ram plate width: 450 mm, ram plate length: 450 mm, distance table to ram: 450 mm, clearance between the columns: 540 mm, oil tank capacity: 400 l, total length: 1,370 mm, total width: 1,470 mm, total height: 2,900 mm, overall weight: 8,700 kg, The hydraulic press is as new. It has 5000 operating hours and has worked at minimal pressures with a maximum of 50 tons. It was regularly serviced by the manufacturer Energo. It is very precise with a pressing depth of 0.01 mm, and offers simultaneous program execution in multiple steps, where you can set the depth, pressure, and pressing speed. It is connected to the power supply and ready to operate. Dcedpfx Aey E N U Ueqcjh

Condition: excellent (used), Year of construction: 2020, General Description For sale: 6 hydraulic presses, model YL32-200. These are robust four-column presses, ideal for metal forming, pressing, stamping, bending, and general industrial uses. The machines were originally imported from China and are based on the widely used Y32 series, ensuring easy maintenance and worldwide availability of spare parts. ⸻ ⚙️ Technical Specifications (typical for YL32-200) * Press force: approx. 200 tons * Construction: 4-column hydraulic press * Stroke: approx. 400 – 700 mm * Table size: approx. 700 x 700 mm – 1000 x 1000 mm * Daylight (max. opening): approx. 800 – 1200 mm * Hydraulic pressure: up to 25 MPa * Motor power: approx. 7.5 – 15 kW * Control system: manual / semi-automatic * Power supply: 380V / 50Hz (industrial standard) * Weight per machine: approx. 5 – 8 tons ⸻ 🏭 Applications * Metal forming & stamping * Deep drawing * Straightening and pressing * Plastic forming * Workshop and industrial production ⸻ 📦 Condition * Used condition * Sold as is / ex-works * Inspection possible by appointment ⸻ 📊 Availability * Quantity: 6 machines available * Sale as single units or as a package ⸻ 🚛 Logistics * Location: Germany * Loading possible (forklift or crane required depending on configuration) * International shipping can be arranged Dcsdsy E Abnepfx Aqcjh * Price per unit!! * Dismantling by buyer!! * Alternatively, dismantling can be organized at an additional cost!

Condition: used, Double-column Hydraulic Press SCHÖN Type SH 25 Machine No. 2440 Year of manufacture: 1979 Press force: 25 tons Column spacing: 630 mm Lateral passage between columns: 120 mm Table area: 580 x 320 mm Ram area: 360 x 220 mm Clamping pin hole: Ø 40 mm Maximum ram stroke: 100 mm Maximum installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Power supply: 380 Volt, 50 Hz - Main cylinder overhauled in 2025 - SICK LUV 206 safety light curtain Dodoyz Dr Tjpfx Aqcjch - Two-hand control - Stroke counter - Rapid stroke and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Press force regulation - Press time extension 1–10 s (pressure holding time) - No operating manual and no wiring diagrams Required space (L x W x H): 1450 x 1100 x 2200 mm Weight: 1200 kg In good condition

Condition: used, machine/vehicle number: 3218, functionality: fully functional, Boldrini PAO 1000 Hydraulic Dishing Press, 1,000 tonne capacity 6,000mm distance between frame Dcjdpfxsyztnws Aqcsh 2x GH overhead travelling workpiece manipulation cranes with independently supported runway, each with 2x 16 tonne capacity hoists

Condition: used, Year of construction: 2014, machine/vehicle number: 101453, functionality: fully functional, power: 368.5 kW (501.02 HP), pressing force: 4,000 t, stroke length: 1,600 mm, operating speed: 200 mm/s, ram plate width: 1,900 mm, ram plate length: 1,900 mm, clearance between the columns: 6,500 mm, overall weight: 480,000 kg, Fagor JBe-4000-2.5x2.5-2013 4,000T Hydraulic Forming Press (2014) 0–4,000 tonnes variable ram pressure 1,900mm ram diameter 2,500 mm x 2,500 mm T slotted top platten 2,500 mm x 2,500 mm T slotted bottom platen 6,500 mm distance between side columns Dcsdpfjyzr Hfex Aqcoh 1,600 mm length of ram stroke 200 mm/s ram speed 12 mm/s pressing speed 368.5 kW total electrical power 480 tonnes total weight of machine 2x overhead travelling workpiece manipulation cranes with independently supported runway, each with 2x 16 tonne capacity hoists Siemens programmable touch screen console for machine and cranes

Condition: good (used), Year of construction: 1978, Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press Dcodpfx Aqeyzd I Ueceh -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 100 tons -Motor: 11 kW -Clamping table: 580 x 440 mm / Bore Ø 150 mm -Max. insertion height: 435 mm -Projection: 650 mm -Max. stroke: 150 mm -Hole: Ø 50 mm -Dimensions: 1640/1300/H2650 mm -Weight: 4440 kg

Condition: excellent (used), Year of construction: 1965, functionality: fully functional, press force: max. 630 to. daylight: 320 mm width: 420 mm stroke: max. 310 mm Dsdpfx Aqjyylhajcoch weight: 3.700 Kg.

Condition: used, pressure 160 t distance between columns 1360 mm stroke 300 mm Dcodpfx Aeyx Im Noqcjh Distance table/ram, max. stroke up, adjustment up 620 mm table surface area 1300 x 900 mm table height over floor 950 mm side window 640 mm ram surface 1300 x 900 mm power requirement 45,0 kW weight 16,0 t Dimensions (WxDxH) 2,5 x 2,1 x 4,1 m with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, mechanical depth stop No foundation pit necessary

Condition: used, Year of construction: 1977, pressure 250 t distance between columns 1110 mm stroke 250 mm Distance table/ram, max. stroke up, adjustment up 500 mm Table surface area 1100 x 900 mm Table height above floor 950 mm Side window 690 mm Ram surface 1100 x 900 mm Oil volume 730 l Power capacity 56,0 kW Dcsdpsyx Im Ajfx Aqcsh Dimensions (WxDxH) 2,3 x 1,55 x 3,96 m with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, depth stop No foundation pit necessary

Condition: used, Year of construction: 1985, pressure 40 t distance between columns 495 mm stroke 150 mm distance table/ram, max. stroke up, adjustment up 300 mm table surface area 490 x 400 mm hole in the table 50 mm table height over floor 950 mm side window 155 mm Dsdpfxjyx Imve Aqcoch ram surface 150 mm speed down 480 mm/s speed up 480 mm/s working speed 20 mm/s oil volume 115 l power requirement 7,5 kW weight 2,2 t dimensions (WxDxH) 1,35 x 1,1 x 2,2 m with oil-hydraulic drive, upper and lower stroke limitation, mechanical depth stop, two-hand and foot operation

Condition: used, Year of construction: 1987, pressure 2000 t distance between columns 975 mm stroke 400 mm distance table/ram, max. stroke up, adjustment up 1000 mm Dsdpfx Aqoyx Impjcsch table surface area 1015 x 1050 mm table height over floor 800 mm capacity of ejector in table 6,3 t ejector stroke in table 100 mm capacity of ejector in ram 65 t ejector stroke in ram 100 mm ram surface 975 x 1050 mm return capacity 150 t speed down 235 mm/s speed up 250 mm/s working speed 5 - 20 mm/s oil volume 4000 l height over floor 3,65 m height beneath floor 3,75 m power requirement 194,0 kW weight 105,0 t dimensions (WxDxH) 5,0 x 6,5 x 7,4 m Calibrating press with oil-hydraulic drive, hydraulic ejector in table and ram

Condition: used, Year of construction: 1980, pressure 250 t distance between columns 1125 mm stroke 250 mm distance table/ram, max. stroke up, adjustment up 800 mm table surface area 1100 x 900 mm pressure of drawing cushion in table 63 t stroke of drawing cushion in table 100 mm Dodpeyx Il Eofx Aqcech die cushion area 700 x 400 mm table height over floor 960 mm side window 700 mm ram surface 1080 x 900 mm oil volume 1000 l power requirement 35,0 kW weight 23,0 t Dimensions (WxDxH) 2,5 x 2,3 x 4,5 m with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick), hydraulic drawing cushion in table, cutting impact cushioning No foundation pit necessary