BC Soluzioni Tecniche Srl

Condition: used, sheet width 750 mm plate length 1250 mm plate thickness 4 mm table surface area 1600 x 1050 mm no. of strokes 180 Hub/min Fpsdpfx Afexfb Hmopsn max. punching diameter 105 mm punching pressure 25 t total power requirement 4,0 kW weight of the machine ca. 1,8 t dimensions 1,9 x 1,9 x 1,7 m Punching and nibbling machine - Digital readout for X and Y axis - Tool cabinet with tools

Condition: used, PUNCHING MACHINE FICEP 604 N -Machine dimensions mm approx. 150x65X220 (H) cm, Weight kg 1500 -Power supply voltage 380 V 50 H -Motor power kW 7.5 -Punching force ton 60 -Max. hole of 32 mm executable on a thickness of mm 16 Fpsdpjxb D Niofx Afpen -Max. diameter with large hole equipment (optional) mm 100 -Working height mm 950 -Punch stroke mm From 0 to 40

Condition: excellent (used), Year of construction: 2011, operating hours: 13,900 h, functionality: fully functional, Machine is in very good technical condition. Despite it`s age, wear is very low. It was used for individual special production, not for serial. Machine is placed and connected at K-system company in Žiar nad Hronom, Slovakia. There you can see it personally. Price is negotiable. Fpsdpfx Afoxbdauepsn

Condition: good (used), Year of construction: 1999, Ficep | Ficep 404 N 400 kN Punch ø 32×10 mm Fpedpfx Afow Trblepon Angle 80x80x8 Section shear: 38 mm round x 35 mm square Plate shear: 350×12 mm Notch: 10 mm

Condition: used, Year of construction: 1999, hydraulic ja Fjdpfxow Sycbj Afpjpn 100 t weight of the machine ca. 2,9 t

Condition: good (used), Brand Boschert Model EL 500 Digital Year of construction 2009 Press force 28 tons Throat depth 180 mm Punching capacity 40 mm in 6 mm Worktable size 500x1000 mm Fjdpfxsw Hyc So Afpjpn Number of strokes 180 pcs Dimensions 2400x1580x1540 mm Weight 2000 kg Power 5 kW

Condition: used, Year of construction: 2007, Amada punching machine EMK 3610NT including loading unit MP300 for sale. We would like to sell the machine as a complete package with tools and the Wilson X-Sharp grinding machine. Fpedsw Hww Hspfx Afpsn

Condition: used, Machine type : Motorized bending roll Manufacturer : Bradbury Control unit : MCE (industrial electrical control panel) Supply voltage : 380 V Phase : 3 Frequency : 50 Hz FLA (Full Load Amperage) : 17.6 A Main motor FLA : 15 A Disconnect short-circuit rating : 200,000 A Internal short-circuit rating : 65,000 A Electrical diagram no. : ED3033 Electrical serial no. : B014541 Fsdsw Dd Iyspfx Afpepn Machine Application The Bradbury bending roll is used for rolling and forming sheet metal into precise cylinders, cones, or arcs. It is employed in the production of ducts, tanks, tubes, or metal shells, and can be integrated into profiling or cutting lines. Features / Differences – Dedicated MCE control panel, with high-capacity electrical protection (200,000 A). – Main motor rated at 15 A, operating on standard industrial 3-phase power. – Full electrical documentation under reference ED3033 for operation and maintenance. – Compatible for integration within Bradbury automated coil processing lines.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Equippment: 1 pce. BIHLER control system P-CNC 200 1 pce. BIHLER Accustic cabine 2 pcs. Grip feeder system right hand side 1 pce. Grip feeder system left hand side 4 pcs. Width slide units (welding press slides) 1 pce Welding sytem BIHLER B 1000 Fpjdpfxowxarqj Afpsn Working range: wire diameter range: 0,5 - 3,0 mm strip metal width: max. 40 mm feeding length: max. 240 mm output: max 400/min

Condition: reconditioned (used), functionality: fully functional, type of input current: AC, Machine overhauled in the workshop by Peddinghaus employee Fpjdowq A Dmjpfx Afpsn

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, stroke length: 45 mm, No minimum price – guaranteed sale to the highest bid! Fpsdpswqgu Aefx Afpjn TECHNICAL DETAILS Ram stroke: 45 mm Max. number of strokes: 350 /min Control: BIHLER P-CNC 300 MACHINE DETAILS Connection voltage: 400 V Mains frequency: 50 Hz Total weight: 2,200 kg Total height: 2,470 mm Required space length: 2,480 mm Required space width: 2,110 mm EQUIPMENT - Soundproof enclosure - Meets current accident prevention regulations - CE compliant - Includes parts lift

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale is an AMADA AE-2510 NT turret punch press from 2017. The machine is in very good condition, fully functional, and has been in continuous production and regularly serviced. This is an advanced machine for precise sheet metal processing, ensuring high quality and work efficiency. Technical Data and Features: Model: AMADA AE-2510 NT Year of Manufacture: 2017 Control: Easy-to-use AMNC controller with integrated software. Drive: Energy-efficient servo-electric drive, lowering operational costs. Precision: High processing precision due to a variable drive. Tooling: Fast tool changes (approximately 1.5 seconds on average). Fpodpswp Ul Hsfx Afpsn 51 tool stations. 4 AMADEX stations for automatic tool rotation at any angle. The turret rotates the shortest path for minimal tool change times. Minimizes setup time. Capable of using special tools, such as slitting tools. Construction: Robust, closed frame to minimize deformation under heavy loads, ensuring high accuracy, reduced vibrations, and extended tool life. Noise and Vibration Level: Reduced due to new servo drives. Machine Condition: Used, in very good condition, fully functional. It has been in continuous production and regularly serviced. Location: Ożarów Mazowiecki, Poland Additional Information: The offer does not include disassembly, delivery, or tools.

Condition: used, Year of construction: 1991, pressure / t plate thickness / mm no. of strokes / Hub/min Condition: used The punching machine works perfectly. A functional video is available. Fodpfxowgi S Ne Afpspn

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: E2510018, working range: 2,500 mm, feed rate Y-axis: 1,250 m/min, Used Amada punch-nibbling machine, type Europe 2510, with LKI MP250 loader/unloader for medium format 2500x1250mm AMADA PUNCH-NIBBLE Type: EUROPE-2510 Year of manufacture: 2002 LOADER/UNLOADER LKI LKI MP 250 Fpsdpfowc Rkfox Afpen Year of manufacture: 2002

Condition: good (used), Year of construction: 2021, operating hours: 2,789 h, functionality: fully functional, machine/vehicle number: MP_0990, Our good condition salvagnini B3 edge bending machine is for sale. Fjdpfxov Ua Dyo Afpepn Type: B3.100-3000 Country of origin: Italy Weight: 8600 kg Processing range: 3060 mm length Pressing force: 100 tons

Condition: ready for operation (used), Year of construction: 1990, An HMS punching machine is available. Pressing force: 250t, stroke height: 40mm, installation height: 450mm, ram adjustment: 20mm, stroke rate: 120 strokes/min, overall system dimensions X/Y/Z: approx. 17000mm/8000mm/3500mm. Including coil and strip processing. Documentation available. On-site inspection is possible. Expected to be available from September 2025. Fsdpov Sct Eofx Afpopn

Condition: new, The Universal Bender, a Folding Machine within the Folding Machines category, is designed for simple manual bending of flat, square, and round materials. This robust tool features a straightforward plug-in system that allows for quick and convenient tooling, making it capable of executing a wide variety of bends, including angles, radii, and coils. Ideal for producing grids, doors, gates, balcony railings, patio furniture, and even wrought iron lamps, the Universal Bender handles round bars up to 15 mm, square bars up to 13 mm, and flat bars up to 30 x 8 mm with ease, thanks to its hardened bending segments. If you’re looking to enhance your sheet metal processing capabilities, this precise bender is an excellent choice. You can request a quote to obtain more information about this essential tool for any metalworking shop, ensuring high-quality results in the Folding Machines product group. Fedpev Iaxwsfx Afpopn

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2410x800x1470 mm Fpodpfevz Euqox Afpon Weight 420 kg Total power requirement 2,4 kw

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, equipped with: 1 Feeding system right hand side Fodevyacyjpfx Afpopn 1 Eccentricpress 300 kN 4 Standard slide unit 1 Narrow slide unit working range: wire diameter range: up to 6,0 mm stripmetal width: up to 80 mm feeding length: up to 520 mm output: 10 - 250/min

Condition: excellent (used), Year of construction: 2014, operating hours: 500 h, functionality: fully functional, machine/vehicle number: MD9 +S4.30xe+IA+ACP+P42516+SAP, SALVAGNINI LINE YEAR 2014 Fpedpfjvx T I Hsx Afpsn WORKING HOURS 500 MACHINE LIKE NEW MD1-3015.RCP.M9+S4X-E.30.H2.70.SSP.EI09.BU31.P2R36.DF/CS5Y.UL1H/ HU22E+ IA3015/TC30155D+R51E+SIX.NT+JOBLINE.CONSOLE+SIMULX+ZVIEWER ACP28+RIP3015+P4Xe-2516.LS.LI.ABA.MBC.ZL.ZTL. SFE.ES.RES.IEC1.CLA.P.PSE.UC570.UP136+SAP27.POS+SIX.NT+JOBLINE.C ONSOLE

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, PivaPunch punching center PCC 125-e - in very good condition with few operating hours. Fpjdpfx Afevxr Tzopsn System consisting of coil car, decoiler, straightening machine, loop pit with hydr. transfer tables, automatic punching machine, scrap removal system, exit conveyor, sheet turning unit, stacking system and Siemens system control. Technical data: Coil weight: 10,000 kg Coil inner diameter: 508 mm Coil outer diameter: 1,600 mm Material thickness: 0.5 - 1.5 mm Material width: 60 - 1,250 mm Tensile strength: max. 400 N/mm2 Product dimensions: max. 2,500 mm long For detailed technical specifications see PDF.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, DC welding unit consist of: Fedpfx Afevxkzqepjpn 1 pce. Welding controller BIHLER B 10 3 pcs. Welding transformer 1 pcs. Cooler unit Welding capacity: 3 x 70 kVA Capacity of the transformer 70 kVA at 50 % ED Power voltage: 400 V, 50 Hz.

Condition: repair required (used), Year of construction: 1990, functionality: fully functional, Shears for cutting reinforcing steel including measuring trolley, winch, sliding measuring stop for measuring length. Fpjdpjvt Eqpsfx Afpjn

Condition: used, Year of construction: 1999, pressure 30 t plate thickness 800 mm keins Fpsdpfjvanvzox Afpjn weight of the machine ca. 1,3 t

Condition: good (used), Year of construction: 1998, Pivatic P60 The machine has a large number of punching tools and multitools (auto index station) with drawer cabinets and an additional punching bracket so that product changes can be made quickly, all of which is included in the scope of delivery. It is also equipped with an additional stacking station (homemade) so that the punched blanks can be stacked automatically. Fpsdpfxju Tw S Hj Afpen