Vissers Heftruck Service

Condition: used, machine/vehicle number: 0926292, Year of construction: 2009, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Hodpfx Aboy Su D Ue Njfg

Condition: used, machine/vehicle number: 462962, Temperature control unit from manufacturer Regloplas, used and untested. The unit is designed for applications in tool temperature control, injection molding, and industrial process technology. It operates as a single-circuit system with the RT 45 control system. Oil is used as the medium, with a maximum flow temperature of 250 °C. The heating capacity is 13.7 kW, and the pump capacity is 60 l/min at 3.5 bar*. Year of manufacture is not specified, total weight is 145 kg. Hedey Su D Ijpfx Ab Njfg

Condition: excellent (used), functionality: fully functional, Lathe in very good condition, fully operational and functioning. The TUR 50S x 1500 mm universal lathe is a classic machine tool version produced by the Wroclaw Mechanical Devices Factory (FAT Wrocław). Geometric and weight parameters: Hfedpfx Ajy Su Dzob Nsg • Maximum turning length between centres: 1500 mm • Maximum workpiece length: approx. 1600 mm Key cutting and drive specifications: • Swing over bed: 500 mm • Swing over cross slide: 300 mm • Spindle bore diameter: 90 mm • Bed width: 432 mm • Main drive motor power: 7.5 kW / 11 kW (two-speed) • Number of spindle speeds: 21 mechanical steps • Spindle speed range: 18 – 1800 rpm • Tailstock quill taper: Morse taper 5 (MT5) • Tailstock quill travel: 180 mm • Rapid traverse rates: longitudinal 5.6 m/min / cross 2.8 m/min

Condition: used, machine/vehicle number: 543105, Temperature control unit from manufacturer Regloplas, used and untested. The unit is suitable for mold temperature control, injection molding, and industrial process applications. It operates as a single-circuit system equipped with the RT 45 control system. The heat transfer medium is oil, with a maximum flow temperature of 300 °C. Heating power is 13.5 kW; pump capacity is 60 l/min at 3.5 bar*. Year of manufacture is not specified, total weight is 160 kg. Hjdpfxjy Su Dns Ab Nofg

Condition: used, machine/vehicle number: 543109, Temperature control unit from manufacturer Regloplas, used and untested. The unit is suitable for mold temperature control, injection molding, and industrial process applications. It operates as a single-circuit system equipped with the RT 45 control system. The heat transfer medium is oil, with a maximum flow temperature of 300 °C. Heating power is 13.5 kW; pump capacity is 60 l/min at 3.5 bar*. Year of manufacture is not specified, total weight is 160 kg. Hfedpfx Aey Su Dheb Nsg

Condition: used, Year of construction: 2002, machine/vehicle number: 802287/01, Temperature control unit from manufacturer Remak, used and untested. This unit is designed for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with the REMAK control system. Water* is used as the medium, with a maximum supply temperature of 95 °C*. Heating capacity is 13.5 kW*, and pump performance is 66 l/min & 4.0 bar*. Year of manufacture: 2002, total weight: 90 kg. Hfedpfey Su Dbex Ab Nog

Condition: used, Year of construction: 2011, machine/vehicle number: 408529.10.000/01, Temperature control unit manufactured by Hahn Automation, used and untested. Designed for applications in tool temperature control, injection molding, and industrial process engineering. Operates as a single-circuit system with REMAK control system. The working medium is water*, with a maximum flow temperature of 95 °C*. Heating capacity is 27 kW, pump capacity is 60 l/min at 4.5 bar*. Year of manufacture: 2010, total weight: 130 kg. Hsdoy Su A Repfx Ab Nsfg

Condition: used, Year of construction: 2011, machine/vehicle number: 253321-01-03, Temperature control unit by gwk, pre-owned and untested. Designed for mold temperature control, injection molding, and industrial process technology applications. Operates as a single-circuit system with the Logotherm control system. The unit uses water* as the heat transfer medium, with a maximum supply temperature of 30 °C*. Heating capacity is not specified; pump capacity is 35 l/min at 3.5 bar*. Year of manufacture: 2011. Total weight: 200 kg. Hodpfey Su Aqex Ab Nefg

Condition: excellent (used), Offer consisting of: Heidelberg SM74-4P-H, year 1999, CP2000, 123 million impressions, all washing devices, inspection possible Hfedpsy Su Akjfx Ab Neg

Condition: used, Year of construction: 2011, machine/vehicle number: 253321-01-04, Temperature control unit by gwk, used and untested. Designed for tool temperature regulation, injection molding, and industrial process engineering. Operates as a single-circuit system with Logotherm control. Uses water* as the medium, with a maximum supply temperature of 30 °C. Heating capacity not specified, pump delivers 35 l/min at 3.5 bar*. Year of manufacture: 2011. Total weight: 200 kg. Hjdpfxoy Su Adj Ab Njfg

Condition: used, Year of construction: 2013, machine/vehicle number: 18575 / 2013, Temperature control unit from manufacturer Robamat, used and untested. The unit is designed for application in tool temperature regulation, injection molding, and industrial process engineering. It operates as a dual-circuit system with the Thermocast 4212 control system. Oil* is used as the medium, with a maximum supply temperature of 320 °C. Heating capacity is 2x 34 kW*, pump output is 75 l/min at 5.0 bar*. Year of manufacture: 2013. Total weight: 350 kg. Hodsy Suz Tepfx Ab Nsfg

Condition: used, Year of construction: 2007, machine/vehicle number: 17037 / 2007, Temperature control unit from Robamat, used and untested. The unit is designed for applications in tool temperature control, injection molding, as well as industrial process engineering. It operates as a two-circuit system with the Thermocast 4212 control unit. Oil* is used as the medium, with a maximum supply temperature of 320 °C. Heating capacity is 2x 34 kW*, pump output is 75 l/min and 5.0 bar*. Year of manufacture: 2007, total weight: 350 kg. Hfedpfxsy Suz Hj Ab Nsg

Condition: used, length / mm width / mm height / mm weight / kg Hjdpfx Aboy Suztj Nsfg

Condition: used, length / mm Hfedpfx Aey Suzmeb Nsg width / mm height / mm weight / kg

Condition: used, GRUNDIG NSV 56 44206-860.02 for lid dialogue Hfedpfsy Suzgsx Ab Nog Condition: used (functional)

Condition: used, feed pressure / bar liter capacity / l power capacity / kW Hsdpfx Aey Suzasb Njfg KSB ETAPRIME 4.14 222 GB09 close-coupled pump Weight: 45kg

Condition: used, VISCOTECH SEM12-F / 10030707 TFT 12" monitor The parts were removed from production facilities that were in operation until they were decommissioned. Condition: used (functional) Hfedsy Suy Nepfx Ab Neg

Condition: used, diameter / mm Cutting (quantity) / weight / kg FUJI MAX-OP1 Handwheel TEACH PENDANT Electronic handwheel Hjdpfxoy Suy Aj Ab Njfg The handwheel works perfectly.

Condition: used, OKUMA POWER SUPPLY 5000T E0451-521-038 Hodpfxey Suyvs Ab Nsfg . 03487

Condition: used, LEUZE CML720i-R05-1600.R/PB-M12 Light curtain receiver Hjdpfsy Suypex Ab Nsfg Item no.: 50122897

Condition: used, Siemens 6SC6112-0AA00 feed module Hfsdey Suyiopfx Ab Neg The parts were removed from production facilities that were in operation until they were decommissioned. Condition: used (functional)

Condition: used, power capacity / kW Hjdpfx Aoy Suyceb Nofg volt / V ampere / A total power requirement / kW weight of the machine ca. / t required space / m Siemens Brushless servomotor 1FK6060-6AF71-1TA0 No. YF U041 5127 02 003

Condition: used, centre height 250 mm weight of the machine ca. 120 kg Reversible clamp with angle scale and three-jaw chuck Dimensions: Chuck diameter 255 mm 60 mm bore Center height 250 mm Base area 350 mm x 400 mm Item Features: Our offers are used items, i.e. can Hfjdpfx Aey Sux Sjb Neg Soiling, storage marks, damage, such as scratches and color defects may also be present. Errors in technical data and description reserved

Condition: used, SIEMENS 6SN1123-1AA00-0EA1 LT-MODUL + 6SN1118-0AA11-0AA1 Condition: Used (working), incl. 3-day functional guarantee after receipt of goods. Hsdpfx Ajy Sux Ejb Nefg

Condition: used, LUBE Corporation MYLUBE-21 Hfjdoy Suxxepfx Ab Njg AMO-III DS Automatic Lubrication Pump / Centralized Lubrication System