HSH Forklifts

Condition: as good as new (ex-display), Year of construction: 2026, power: 0.75 kW (1.02 HP), S&F Oscillating Screen | Screening Machine Type ASM-75 Demonstration Machine Make: S&F GmbH Type: ASM-75 Screening capacity: approx. 7 - 10 m³/h (depending on material) Fractions: 3 Screening surface: 0,73 m² per screen mesh size Screen decks: 3 pieces Screen mesh size: - 1st screen deck: punched perforated plate screen, D = 40 mm or by arrangement - 2nd screen deck: punched perforated plate screen, D = 10 mm or as agreed Drive power: 0,75 kW, 3 x 400 V, 50 Hz L x W x H: 2,000 x 1,100 x 1,100 mm Design: TopLine Machine weight: approx. 600 kg Machine colour: RAL 5015 Sky Blue // Protective housing: RAL 7035 Light Grey Screen inserts freely selectable Design of the material outlet according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips Gedpey Sixtefx Alxoub - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: as good as new (ex-display), Year of construction: 2026, power: 1.5 kW (2.04 HP), S&F Oscillating Screen | Screening Machine Type ASM-150 Demonstration Machine Make: S&F GmbH Type: ASM-150 Screening capacity: approx. 15 - 25 m³/h (depending on material) Fractions: 3 Screening surface: 1.5 m² per screen mesh size Screen decks: 3 pieces Screen mesh size: - 1st screen deck: punched perforated plate screen, D = 40 mm or by arrangement - 2nd screen deck: punched perforated plate screen, D = 10 mm or as agreed Drive power: 1.5 kW, 3 x 400 V, 50 Hz L x W x H: 2,700 x 1,500 x 1,300 mm Design: TopLine Machine weight: approx. 1,200 kg Machine colour: RAL 7043 Traffic Grey B // Protective housing: RAL 3020 Traffic Red Screen inserts freely selectable Design of the material outlet according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust Guodpfx Asy Sixmelxeb - biomass - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 19,000 h, load capacity: 12,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,600 mm, fork carriage width: 2,500 mm, fork length: 1,900 mm, empty load weight: 22,000 kg, total length: 5,200 mm, drive type: Diesel, construction width: 5,200 mm, Diesel Forklift Load Centre: 1200 Guodpfxoy Sixgj Alxjb Fork Width: 270 mm Fork Thickness: 75 mm Mast Type: Standard Condition: Ready for operation and fully functional Technical Condition: Very good Front Tyres Type: Pneumatic Front Tyres Size: 12.00-20 Rear Tyres Type: Pneumatic Rear Tyres Size: 12.00-20 Description: In addition to this Svetruck model, we have around 200 heavy-duty forklifts, compact forklifts, industrial forklifts, and sideloaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Leasing and financing at favourable terms are always possible. We are also happy to buy your used equipment outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with comprehensive advice regarding this 12120-35. P.S.: Our certified forklift workshop specialises in repairs, overhauls, refurbishment, and custom builds for forklifts from 8 tons upwards. We are also happy to offer your vehicle for consignment sale. Sideshift, Fork Positioner, Heater, Full Cabin,

Condition: used, functionality: fully functional, Year of construction: 1998, operating hours: 13,049 h, load capacity: 20,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,900 mm, fork carriage width: 3,300 mm, fork length: 2,400 mm, empty load weight: 36,400 kg, total length: 5,900 mm, drive type: Diesel, construction width: 3,300 mm, Diesel forklift Load center: 1200 mm Fork width: 200 mm Fork thickness: 110 mm Gsdpfx Aljy Sixasxjub Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 14.00-24 Rear tires type: Superelastic Rear tires size: 14.00-24 Description: In addition to this SMV model, we have around 200 heavy-duty forklifts, compact forklifts, forklift trucks & side loaders in our Hamburg and Gdansk warehouses. Visit our website – sago-online. Leasing and financing on favorable terms are always possible for us. We are also happy to buy your used machine outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail on this SL20-1200A. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons upwards. We are also happy to offer your vehicle for consignment sale in our facility. Side shifter, fork positioner, Heater, full cabin,

Condition: used, Year of construction: 2020, operating hours: 31,623 h, laser power: 4,000 W, working length: 3,000 mm, working width: 1,500 mm, year of last overhaul: 2026, Machine Configuration: Standard Equipment: Machine - Working area: 3000 × 1500 mm - Enclosed machine frame - Longitudinal conveyor belt - Motion unit for high-precision processing - Gantry drive in combination with linear direct drives - Cooling unit for machine and laser (water-air) - Work area lighting - Positioning laser diode - Spray device - Automatic nozzle cleaning - Integrated control cabinets - Integrated cabinet - Enclosed beam guidance via laser light cable (LLK) - Machine status light - Ambient operating temperature 5 to 40 °C - Transport and assembly device TRUMPF Laser - Excitation via pump diodes - Laser power control Cutting unit - Single-head cutting strategy - Universal cutting unit with adaptive lens system - Protective glass - Online condition monitoring of protective glass Control - Fast reproduction - SINUMERIK 840D SL control - Ergonomic control panel with 21.5″ wide-screen multi-touch color display - Integrated technology data - Auto shut-off - Programmable selection of cutting gas/pressure - Microweld Gedpfsy Sivfox Alxeub - Remote support interface - Production planning - Multi-sheet processing - Condition Guide - Cutting Guide Functions - AdjustLine - ControlLine - FastLine - FlyLine - FocusLine - NitroLine - PierceLine - Copper cutting package - Brass cutting package Data transmission - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety - CE marking - Light barriers - Multi-chamber extraction system - Machine paneling with certified viewing window, right door Extended Standard Equipment - Compact dust extractor - Support slats made of construction steel - Network installation via remote support Extended Machine Equipment Extended Laser Equipment - External solid-state laser TruDisk 4001 with 1 LLK output Additional Machine Functions - Drop&Cut - Integrated camera 1 for process monitoring Additional Cutting Packages - Highspeed Eco cutting package Extended Machine Equipment - Dust protection for device panel Data transmission - Wireless Operation Point Availability: approx. 6–8 weeks after receipt of order, at the earliest end of June 2026 Price: on request Current location: TRUMPF Reconditioning Facility Netherlands The machine is currently undergoing reconditioning!

Condition: excellent (used), Year of construction: 2013, S016737 MANUFACTURER: ATLAS COPCO MODEL: GA7VSD SERIAL NO.: CAI716650 Godpfx Aljy Sit Dexsub YEAR: 2013 POWER (kW): 7.5 CAPACITY (m3/min): 1.21 PRESSURE (bar): 13 OPERATING HOURS (DOC/TOTAL): 46,345 FREQUENCY INVERTER: yes BUILT-IN DRYER: no HEAT EXCHANGER: no COOLED (AIR/WATER): air ON TANK: no DOCUMENTS: no NEW/USED: USED

Condition: new, AUMA GF125.3 i=208:1 4000Nm IP67 Gusdpfxoy Sitwe Alxeb

Condition: excellent (used), Year of construction: 2016, MANUFACTURER: ATLASCOPCO MODEL: GA11VSDFF PLUS S/N: API259443 Year: 2016 Power (kW): 11 Output (m³/min): 1.95 Pressure (bar): 12.75 Operating hours (recorded/total): 35695 Frequency inverter: yes Built-in dryer: yes, R134a 0.40kg Heat exchanger: no Cooling (air/water): air Mounted on tank: no Documentation: no Gedpey Sitqjfx Alxjub Connection: 3/4" New/Used: Used

Condition: new, Year of construction: 2026, MANUFACTURER: ATLASCOPCO MODEL: G11FF S/N: ITJ1036821 YEAR: 2026 POWER (kW): 11 CAPACITY (m3/min): 1.51 PRESSURE (bar): 9.75 OPERATING HOURS (DOC/TOTAL): 0 FREQUENCY INVERTER: no BUILT-IN DRYER: yes, R513a 0.5kg HEAT EXCHANGER: no COOLING (AIR/WATER): air ON RECEIVER TANK: yes, 500 L Gjdpfx Aloy Sitkoxsub DOCUMENTATION: yes CONNECTION: 1 NEW/USED: new

Condition: excellent (used), Year of construction: 2011, 16768 MANUFACTURER: KAESER MODEL: SK25 Serial No.: 1015 Year: 2011 Power (kW): 15 Output (m3/min): 2.25 Pressure (bar): 11 Operating hours (DOC/TOTAL): 19238/36933 Frequency inverter: no Guodpsy Sitdsfx Alxob Built-in dryer: no Heat exchanger: no Cooling (air/water): air Mounted on tank: no Documents: no Connection: 3/4

Condition: excellent (used), Year of construction: 2014, Foliant 520 HP with feeder Max size: 520 x 710 mm Min size: 250 x 350 mm Max speed: 15 m/min Separator Feeder Working temperatureL 80 - 140 C Available immediately Guodpjy Sir Tofx Alxeb

Condition: new, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 1209942CHP029A, (NEW)(UNUSED) Stainless steel centrifugal pump Flowserve brand, Model MK3STD, Series 1209942CHP029A, Year 2017; With Durco Brand Pump 3" Suction, 2" Discharge; With a 15 hp baldor electric motor, 1180 RPM, 460V; Includes 3 gallon capacity hydraulic sealant for pressure, maximum capacity of 195 psi / 13.7 bar, maximum temperature 200°F, with valve control. (NUEVO) Bomba centrifuga en acero inoxidable Marca Flowserve, Modelo MK3STD, Serie 1209942CHP029A, Año 2017; Con bomba Marca Durco 3" de Succión, 2" de Descarga; Con motor electrico marca baldor de 15 hp, 1180 RPM, 460V; Incluye Sellador hidraulico con capacidad de 3 galones para presion, con capacidad maxima de 195 PSI / 13.7 bar, temperatura maxima 200 °F, con control de valvulas. Gjdey Sir Hjpfx Alxeub

Condition: new, functionality: fully functional, machine/vehicle number: 1AA141GC40A, (NEW)(UNUSED) Lot Containing: 13 Electric Duct Heaters, Centrifugal Extractor SOLER PALAU Brand, Model PL-304, with 2 HP Electric Motor, CSC Brand Metal Container Type 1AA141GC40A, 2 Surface Burning rock board type 24 x 48 x 5/8 ", 11 Metal Laboratory Furniture of different sizes, 2 Metal Cabinets for Fire Fighting Equipment Brand FLARM LQD UNIT, Approximate dimensions 122 x56 x 88 cm, A/I Extraction Hood with 2 12" Extractors with Approximate measures 244 x 92 x 152 cm. Please Inspect Godpfxey Sirye Alxeub (NUEVO) Lote que Contiene: 13 Calentadores de de ducto electrico, Extractor Centrifugo Marca SOLER PALAU, Modelo PL-304, con motor electrico de 2 HP, Contenedor Metalico Marca CSC Tipo 1AA141GC40A, 2 Surface Burning tipo tabla roca 24 x 48 x 5/8 ", 11 Muebles para Laboratorio Metalicos de dioferentes medidas, 2 Gabinetes Metalicos para Equipo contra Incendio Marca FLARM LQD UNIT, Medidas aproix 122 x56 x 88 cm, Campana de Extraccion en A/I con 2 Extractores de 12" con Medidas aprox 244 x 92 x 152 cm. Favor de Inspeccionar

Condition: excellent (used), Year of construction: 2008, Used flexo machine NILPETER FA4-8-color Labelpress •⁠ ⁠Age: 2008 •⁠ ⁠Serial No.: F4289 •⁠ ⁠Web Width: 420 mm - 16.5 inches •⁠ ⁠Servo Driven •⁠ ⁠8 x Flexographic Print Units •⁠ ⁠8 x UV Dryers System from GEW •⁠ ⁠Labelshifter •⁠ ⁠Web Control •⁠ ⁠Splicing Table •⁠ ⁠Die Cutting Guodjy Sirtspfx Alxob •⁠ ⁠Die Cutting Stations •⁠ ⁠Maximum Rewind Diameter 1000 mm – 40“ •⁠ ⁠Video Monitoring BST •⁠ ⁠Turn Bar •⁠ ⁠Automatic Register •⁠ ⁠Prints Film 25-300 Microns (3 Options: Folie or Paper or Carton) •⁠ ⁠And tools (Magneticcylinder, Printingcylinder, Aniloxcylinder etc.) In production Available immediately

Year of construction: 1998, condition: used, functionality: fully functional, (USED) General Cargo Container in Steel, approximate measurements 12 m long x 2.30 m wide x 2.30 m high, Year 1998. Please Inspect. DOES NOT INCLUDE CONTENTS, DELIVERY WILL BE MADE WHEN THE CONTAINER IS EMPTY (USADO) Contenedor de carga General en Acero, medidas aproximadas 12 m de longitud x 2.30 m de ancho x 2.30 m de altura, Año 1998. Favor de Inspeccionar. NO INCLUYE CONTENIDOS, LA ENTREGA SE REALIZARÁ AL VACÍAR EL CONTENEDOR Guodpfxsy Sirgs Alxob

Condition: good (used), table width: 260 mm, table length: 1,120 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 90 rpm, – ISO40 – 90–2000 rpm – Table 1120 × 260 mm Gujdpsy Sirajfx Alxjb – Automatic feed on X, Y, and Z axes – Rapid traverse – Digital readout on 3 axes – Quill – Milling head is swiveling – Lighting – 400V

Condition: good (used), Year of construction: 1990, Headop Smyth 55 Max format: 310 x 550 mm Min format: 60 x 120 mm Max speed: 125/min Gedpfxoy Siq Ne Alxeub Number of openings: 6 on top 1 on bottom Weight: 900kg Available immediately

Condition: ready for operation (used), functionality: fully functional, The machine is currently in storage and everything is operational, but it requires maintenance. It comes with plenty of spare parts and toners. Guedpfx Aey Siq Aelxeb

Condition: new, functionality: fully functional, (NEW)(UNUSED) Tempest-1600 Floating Unit Hovercraft. ASTON Brand. Main components: Foam-filled MDPE floats; Fan array – 16 in total; Hydraulic water pump, Heat exchangers; Structure made of 304 stainless steel. Atomization capacity: One fan atomizes 0.019 m³/minute; 16 fans atomize 0.302 m³/minute; 16 fans atomize 18.17 m³/hour; 16 fans atomize 587.5 m³ in 24 hours Gjdpey Siqpofx Alxoub Aerolancha Unidad Flotante Tempest-1600. Marca ASTON. Componentes principales: Flotadores de MDPE rellenos de espuma; Arreglo de ventiladores – 16 en total; Bomba hidráulica de agua, Intercambiadores de calor; Estructura fabricada en acero inoxidable 304. Capacidad de atomización: Un ventilador atomiza 0.019 m³/minuto; 16 ventiladores atomizan 0.302 m³/minuto; 16 ventiladores atomizan 18.17 m³/hora; 16 ventiladores atomizan 587.5 m³ en 24 horas

Condition: repair required (used), Year of construction: 2018, functionality: not functional, machine/vehicle number: SG65Q11001, The machine was acquired in working condition. It has not been in operation for a long time. It requires maintenance. Gsdpsy Siqijfx Alxsub

Condition: used, Currently in use in Zaventem, Belgium. In very good condition. Gedpsy Siqcsfx Alxsub

Condition: ready for operation (used), functionality: fully functional, mileage: 88,000 km, first registration: 01/2021, fuel type: diesel, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 2,500 mm, loading space width: 1,765 mm, loading space height: 1,700 mm, Year of construction: 2021, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, sliding door, soot filter, traction control, Renault Master L1H1 📅 Registration: 01/2021 📍 Mileage: 88,000 km Gujdpfx Aley Sip Sexsb 🔧 Engine: 2.3 dCi – 135 HP ♻️ Euro 6D Temp Evap Final ✔ Short wheelbase ✔ Low roof ✔ Payload: 840 kg ✔ Cruise control ✔ Air conditioning ✔ Vehicle in excellent condition ✔ Neat loading compartment 🛡 12-month warranty

Condition: ready for operation (used), Theisen & Bonitz 303 stitching unit Booklet Maker / Brochure Finishing Equipped with 2 Hohner stitching heads and delivery belt. Gusdpfx Ajy Sip Eelxeb 9-station high-pile collating machine Complete with 1 pump Max format: 350 x 50 cm

Condition: new, functionality: fully functional, (INDIVIDUAL)(NEW)(UNUSED)(Price subject to final confirmation) Complete building of approximately 440 m" in carbon steel structure of measurements. 22.5 mts. Length X 19.5 X mts. wide. Includes: Beams, Panels. Electric Room of 15.2 mts X 4.1 mts. (NUEVO) Edificio completo de aproximadamente 440 m" en estructura de acero al carbon de medidas. 22.5 mts. Largo X 19.5 X mts. de ancho. Incluye: Vigas, Paneles. Cuarto Eléctrico de 15.2 mts X 4.1 mts. Guodpfx Aloy Sipxsxjb Este lote se venderá al mejor postor, ya sea de manera individual (INDIVIDUAL) o como sistema completo (COMPLETE SYSTEM), adjudicándose en la modalidad que genere el mayor valor de venta. / This lot will be sold to the highest bidder, either individually (INDIVIDUAL) or as a complete system (COMPLETE SYSTEM), and will be awarded in the mode that generates the highest sales value.

Condition: ready for operation (used), Year of construction: 2000, Müller Martini Amyrs/Prima Gujdey Siprepfx Alxeb Year 2000, 8 stations, 1 cover feeder, stitching, three-knife trimming, stacker Production capacity: 14,000 units/hour Min. format: 90 x 105 mm Max. format: 320 x 480 mm