Gestamp Polska

Year of construction: 1977, condition: used, This profile press SP 2000 is being auctioned online in our industrial auction / machinery auction due to the site closure of ContiTech Transportsysteme. Fpodjyz Sw Dopfx Af Ejf

Year of construction: 2002, condition: ready for operation (used), A repair-required Safan CNC press brake is available. Working width: 2050mm, press force: 400kN, ram stroke: 180mm, installation height: 450mm, closing speed: 90mm/s, working speed: 20mm/s, machine dimensions X/Y/Z: approx. 3000mm/1500mm/2500mm, weight: approx. 5000kg. The tool clamping system of the machine is defective. Documentation available. An on-site inspection is possible. Fpsdpfx Afsyz Anae Ejf

Year of construction: 2021, condition: used, Technical details: pressure: 5 t distance between columns: - mm dayligth: 60 mm rated capacity: 8 kVA table height adjustment: 60 mm Fpedsyzzh Ejpfx Af Esf compressed air: 6 bar connection voltage: 400 V electrics - voltage/frequency: 400/50 V/Hz total power requirement: 4 kW machine weight ab.: 610 kg SERVO-MECHANICAL SPINDLE PRESS Machine is programmable! MACHINE DESCRIPTION (2 machines available) MACHINE: Electrically driven press with a pressing force of 50,000 N The machine is designed for pressing bearings and rubber seals. It consists of a welded L-shaped frame. A movable press table is mounted on the horizontal arm, which can be manually adjusted along linear guides. In the front position, the table can be manually locked using a spring-loaded pin. In the working position (under the press head), the table is automatically locked by a pneumatic cylinder. The press head can only be lowered using two-hand operation when the table is in this position. The control panel includes: ·Two-hand control switches ·Emergency stop switch ·Table lowering button ·Force selection switches (1, 2) The pressing force can be adjusted using potentiometers in the control cabinet. Two force levels and the corresponding pressing speed can be set there. The press head moves along the vertical arm of the press on linear guides. It is driven by a lead screw, powered by an electric motor with gearbox via pulleys and a timing belt. The entire machine is mounted on a table made of aluminum profiles. *

Year of construction: 2008, operating hours: 2,008 h, condition: ready for operation (used), overall weight: 15,000 kg, This Dunkes HZS 160 Bending machine was manufactured in the year 2008 and has 2250 production hours. The machine is in good condition and well maintained. Machine Benefits Qualitative Machine Benefits • The machine is in good condition and fully functional Fpodpjyzf A Tofx Af Esf

Condition: used, This press brake will be auctioned online in our industrial/machinery auction due to the closure of the ContiTech Transportsysteme site. Fpedpfx Ajyzdlmef Eof

Condition: used, Hydraulic press by UVA Fodpfx Ajyxnavjf Eopf

Condition: ready for operation (used), A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible. Fpsdpfxjyxgr Re Af Eef

Year of construction: 1994, condition: ready for operation (used), A hydraulic transfer molding press Lauffer is available. Press force: 125t, power: 15kW, hydraulic oil volume: 300l, machine dimensions X/Y/Z: approx. 2200mm/1400mm/3000mm, weight: approx. 6500kg. An on-site inspection is possible. Fodsyxgq Topfx Af Eepf

Condition: used, For sale: Vaccari Press 330T. The machine is currently not in operation. Ideal for refurbishment or spare parts. For more information or if interested, feel free to send a message. Fsdpfx Asyvia Sef Eopf

Year of construction: 1985, condition: ready for operation (used), Press force: 100t, stroke rate: 60/min, ram stroke: 8mm-137mm, ram adjustment: 80mm, throat depth: 375mm, table dimensions X/Y/Z: 800mm/630mm, machine dimensions X/Y/Z: approx. 1500mm/2400mm/3500mm, weight: approx. 8800kg. An on-site inspection is possible. Fodpfxsyu T Dqo Af Eopf

Year of construction: 1978, condition: ready for operation (used), Pressing force: 63t, working dimensions X/Y: 620mm/500mm, motor power: 22kW. An on-site inspection is possible. Fpedpfx Aeyu T Dwof Eef

Year of construction: 2003, condition: ready for operation (used), overall weight: 16,300 kg, total width: 3,110 mm, total height: 1,855 mm, pressing force: 23 t, product length (max.): 3,735 mm, stroke length: 275 mm, Hydraulic press manufactured in 2003. This Darley EHP-LS 230.31/25 features a press force of 230 tons and a maximum bending length of 3100 mm. It includes a throat depth of 400 mm and a stroke of 275 mm. The machine is equipped with CNC control and independent hydraulic axes for enhanced precision. If you are looking to get high-quality bending capabilities, consider the Darley EHP-LS 230.31/25 hydraulic press we have for sale. Contact us for further details. • Technical specifications • Max hydraulic pressure: 250–300 bar • Distance between columns: 2550 mm • Throat depth: 400 mm • Table width: 170 mm • Table height: 900 mm • Max opening: 500 mm • Rapid approach speed: 120 / 140 mm/s • Working speed: 10 mm/s Fpedpoyuya Sefx Af Eof • Oil tank capacity: 200 L • Main drive power: 24.5 kW • Max power consumption: approx. 27–32 kW • Noise level: 72–78 dB(A) • Backgauge • X-axis range: 0–800 mm • Z-axis range: 80–2150 mm • R-axis height adjustment: 190 mm • Accuracy: ±0.05 mm (X/Z), 0.1 mm (R) • Positioning speed: • X axis: up to 400 mm/s • Z axis: up to 250 mm/s • R axis: up to 100 mm/s • Number of backgauge fingers: 2 (expandable) • Axes configuration: 6 axes (X1, X2, Z1, Z2, R1, R2) • Equipment / Features • CNC control (commonly Delem DA series) • CNC crowning (table compensation) • Independent Y1/Y2 hydraulic axes • Backgauge with X, R, Z axes • WILA hydraulic upper clamping • Pneumatic lower clamping • Optional front laser safety system Technical Specification Bending Length 3100 mm

Year of construction: 2019, condition: like new (used), functionality: fully functional, Technical Specifications * Machine Type: Cortazar Press * Pressure: 5000 ton/m² * Useful Dimensions: 4700 × 1820 mm * Number of Cylinders: 10 Fsdpfxjyt Rf Ae Af Ejpf * Plate Type: Pre-drilled stainless steel plates with vacuum system * Press Opening: 300 mm * Cylinder Diameter: 500 / 480 mm * Number of Plates: 2 * First Height: 1370 mm * Last Height: 1570 mm * Total Force: 5000 tons * Filter Belt: Yes * Integrated Water Tank: Yes * Loading and Unloading System: Automatic * Overall Dimensions: 5355 × 2500 mm * Usage: 546 pressing cycles

Year of construction: 2016, condition: good (used), 1.00 - GENERAL MACHINE DATA · Machine type: APC 1500 TON · Closing direction: Downstroke · Max. operating pressure (primary circuit): 220 BAR · Clamping force: 1500 TON · Weight: approx. 42,000 kg · Dimensions (W x D x H): 2500 mm x 2500 mm x 5500 mm 1.01 - HYDRAULICS & CYLINDERS · Number of clamping pistons: 1 · Clamping piston diameter: 930 mm · Clamping piston stroke: 700 mm · Number of rapid traverse/return cylinders: 2 (oil-hydraulic) · Force of rapid traverse cylinders: 20 TON (each) · Rapid traverse cylinder (bore): 120 x 50 mm · Guide columns: Steel C45, hard-chromed (0.15 mm), Ø 200 mm · Guide length: 600 mm 1.02 - DIE HANDLING TROLLEY (TRANSFER CART) · Transfer cart dimensions: 900 mm x 1900 mm · Transfer cart stroke: 1500 mm · Number of cart cylinders: 2 · Cart cylinder bore: Ø 70 x 40 mm (stroke 1400 mm) · Loading and unloading side: Front 1.03 - WORK AREA & TOOLING Fodpfjytc Shox Af Eepf · Number of working levels: 2 · Number of usable spaces: 1 · Clear distance between levels: 800 mm · Ejector travel area: 650 mm x 600 mm · Minimum tool height: 100 mm 1.04 - ELECTRICAL DATA & CONTROL · Control system: Programmable Logic Controller (PLC) · Motor voltage: 380 V / 50 Hz · Control voltage: 24 V DC · Installed power (main motor): 37.5 kW · Frequency converter: Yes (for low-noise operation and energy savings) · Vertical travel measurement: Linear transducer · Cart travel measurement: Encoder with absolute zero point · Pressure monitoring: Electronic pressure transmitter 1.05 - SAFETY FEATURES · Fall protection: Progressively acting mechanical safety device (effective in any position) · Safety zones: Light curtains (Category 4) at loading and unloading sides · Side guards: Fixed frames with interlocked safety doors (safety switches) · Standards: Complies with CE guidelines 1.06 - CONSTRUCTION & MATERIALS · Frame: Electrically welded steel (ribbed) · Bearing bushes: Bronze bushings · Hydraulic components: CETOP standard (e.g. ATOS) · Pneumatic components: UNI-CETOP standard

Condition: good (used), Used hose crimping machine from Finn Power Lillbackan Konepaja Fpsdpfxjytb D As Af Esf Type: P 32 RAE Including various dies up to 52 mm diameter Capacity up to 78 mm (excluding dies)

Condition: excellent (used), selection of AMADA PROMECAM press brakes for sale ranging from 50 tonne plus call or email for inquiries Fpodpoyryqlefx Af Ejf

Condition: ready for operation (used), Press force: 250kN, ram stroke: 8mm-80mm, stroke rate: 180/min, installation height: 310mm, table dimensions X/Y: 550mm/400mm, ram dimensions X/Y: 355mm/220mm, machine dimensions X/Y/Z: approx. 1100mm/1400mm/2300mm, weight: approx. 2500kg. An on-site inspection is possible. Fedpfeyq R Edox Af Eopf

Year of construction: 1973, condition: ready for operation (used), A single-column eccentric press Edelhoff including transfer unit is available. Press force: 130t, stroke adjustment: 30mm-130mm, ram adjustment: 75mm, stroke rate: 45/min, table dimensions X/Y: 1000mm/700mm, weight: approx. 5000kg. An on-site inspection is possible. Fpedpfx Aoyq R D Tof Eef

Year of construction: 1981, condition: ready for operation (used), Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible. Fedoyq R D Hopfx Af Eepf

Year of construction: 1977, condition: ready for operation (used), An old eccentric press Elmerding with defective foot switch is available. Press capacity 30°: 25t, stroke adjustment range: 12mm-80mm, ram adjustment: 60mm, stroke rate: 120rpm, table adjustment: 150mm, safety distance: 144mm, weight: approx. 1450kg. Only 2-hand operation is possible. Documentation available. An on-site inspection is possible. Fsdpfx Ajypr Spof Ejpf

Condition: used, functionality: fully functional, Knuckle joint / coining presses CINCINNATI HME K-360 tons (3 units) Fjdsypathjpfx Af Eopf K-600 tons (1 unit) Cincinnati HME K360 360 Tons capacity Stroke 2.125" Speed 90-200 SPM Main Motor 22 kW Maximum Coin Diameter 34 mm Maximum Coin Thickness 3.5 mm Cincinnati HME K600 600 Ton Capacity, 4.5'' Stroke, 25 Strokes per min, 17.5'' Shut Height (SDAU), 9/16'' Top Tool Adjustment

Year of construction: 1991, condition: ready for operation (used), Press force: 250kN, Operating pressure: 280bar, Stroke: 300mm, Installation height: 500mm, Reach: 250mm, Oil filling: 280l, Ram speed: 105mm/s, Weight: approx. 2550kg. Documentation available. An on-site inspection is possible. Fodpfx Afeynlubo Eopf

Condition: not inspected (used), functionality: unexamined, overall weight: 4,250 kg, total length: 1,500 mm, total height: 2,900 mm, table length: 750 mm, table width: 620 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Pressing force: 100 kg Table dimensions: 750 x 620 mm Capacity: 180 l Fpsdpfx Afjym Rtas Eof MACHINE DETAILS Operating voltage: 380 V Connected load: 7.5 kW Dimensions & Weight Dimensions (L x W x H): 1,500 x 1,200 x 2,900 mm Weight: 4,250 kg External reference: Lot 136 / Lotec

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, YAMADA DOBBY Model: DP-35CS Capacity: 35ton Stroke: 30mm SPM: 150~500 Fsdpfxeylr Nmj Af Ejpf Die Height: 260mm Slide Adjustment: 50mm Slide Area: 320 x 250mm Bolster: 600 x 390 x 100mm Bed Opening: 350 x 120mm Manufactured Year: 1994

Year of construction: 2015, condition: excellent (used), functionality: fully functional, SAMDO (KOREA) MODEL: SDH-80KTP CAPACITY : 80 STROKE LENGTH : 226mm DIE HEIGHT: MAX. 580mm Fpedpfx Afeyldr Ho Esf SLIDE AREA: 1400 X 500 BOLSTER AREA: 1400 X 500 MFD: 2015 SUITABLE FOR DEEP DRAWING PART PRODUCTION