Michael Preißel Vermietung

Condition: used, Year of construction: 1988, Item 1.0 Precision turntable make EIMELDINGEN with aerostatic axial bearing Table diameter 3,400 mm Total height approx. 1,230 mm Centering bore Ø 250H7X 25 mm Permissible transport load 20,000 kg Holding torque of the table clamp 2,400 daNm Table speed 0.002 - 2 min Dead weight approx. 22,000 kg Operating voltage 380 V, 50 Hz. Control voltage 24V Positioning accuracy (without controller error) ± 1" Plan accuracy 0.02 mm Axial run-out accuracy 0.01 mm Concentricity deviation of the centering bore 0.01 mm Resolution of the position measuring systems 0.0001° Item 2.0 3-axis cross-bed boring mill Technical data Column stroke transverse "X" 500 mm Horizontal slide stroke "Z" 650 mm Vertical headstock "Y" 800 mm Rapid traverse speed Y + Z 8,000 mm/min Feed speed (infinitely variable) 0-1000 mm/min Spindle drive power 15 kW Spindle diameter in front bearing 100 mm Speed range 0-4000 rpm Tool holder ISO 50 Position tolerance Tp (1000) 0.012 mm Dedpfx Aou R Nm Hjh Iecd Position spread Ps 0.008 mm Position deviation PA 0.008 mm Measurements carried out at room temperature + 20°C. Item 3.0 Grinding device for clamping fixture Item 4.0 Coolant system/chip disposal Total coolant volume 1,200 l High-pressure pump for unit 1 60 l/min 10 bar Low-pressure pump for units 2+3 40 l/min 2 bar Flushing pump 200 l/min 0.2 bar The pressure of the high-pressure pump is monitored. A rinsing hose for cleaning the workpiece and clamping device is available. General: Data of the complete system Base area of the entire system approx. 8,800 x 10,800 mm Base area of the actual machine approx. 8,000 x 6,200 mm Max. Machine height without workpiece approx. 3,700 mm Max. Machine height with workpiece approx. 5,500 mm Operating voltage 380 V. 50Hz. Control voltage 220 V./24 V Total installed power approx. 55 kW Max. Power consumption in normal operation approx. 28 kw

Condition: used, Year of construction: 1984, cycle time 0 sec total power requirement 2,5 kW weight of the machine ca. 1 t dimensions of the machine ca. m P O S A L U X (Switzerland) Dedpet Hwvgofx Ah Iecd Horizontal 3-Spindle Fine Boring Machines Model MICROFOR PNC 3 Year 1984 Serial Nos. 6.8230/9 Boring Æ 0.15 - 2 mm Spindle stroke 0 - 18 mm Working stroke, max. 0 - 12 mm Quick feed 60 mm/sec Boring feed 0 - 5 mm/sec Spindle speeds 3,500 - 11,500 rpm Distance between spindles, vertical, approx. 80 mm Table speeds (for deburring) approx. 100 rpm Table Æ, approx. 100 mm Table bore, approx. 70 mm Table slide swivelling device, approx. 60 °/sec Swivelling range 0 - 100 ° Total drive, approx. 2.5 kW Weight 1,000 kg Accessories / Special Features Serial No. 6.8230/9 Machine is equipped with a modern POSALUX SELECTRON Control with keyboard and LED for direct programming on the machine (in principle the same as with a punchboard control). With setting microscope and machine lamp.

Condition: excellent (used), Year of construction: 1999, Drilling capacity (steel): 18mm Drilling capacity (cast): 23mm Thread cutting (steel): M14mm Dcedpfx Askytxzeh Ijd Spindle holder: MK 2 Spindle stroke: 100mm Extension: 250mm Column diameter: 90mm Power: 0.55 kW Spindle speed: 125 – 2400 RPM / 225 – 4300 RPM

Year of construction: 1966, condition: not inspected (used), Rough SM fine drilling mill, drilling mill -WKG 385- Offered here is fine boring mill of the company Grob. Technical data: Manufacturer: Grob Djdpfxjhg Nxxj Ah Ijcd Type: SM Year of manufacture: 1966 spindle throat max.: 450mm spindle speed min.: 205 rpm spindle speed max.: 610 rpm number of spindles: 2 pieces table length: 300mm table width: 550mm distance table to spindle: 750mm feed: hydraulic

Condition: used, Jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, -Table dimensions: 700 x 405 mm -Travel: Z 330 mm/Y 410 mm/X 630 mm -Quill stroke: 155 mm -Recording: MK4 Dcsdpfx Ajd Tk Stjh Ied -Speeds: 31 - 1500 rpm -Dimensions: 1570/1800/H2600 mm -Weight: 2600 kg