Fabryka Automatów Tokarskich we Wrocławiu SA

Condition: used, Year of construction: 2023, Technical details: turning diameter: 770 mm turning diameter over slide: 650 mm turning length: 750 mm max. diameter of work permitted:: 82 mm y-axis: +/- 60 mm turret (x-stations): 12 VDI 40 turning speeds: 4.000 1/min tail stock: ja total power requirement: 47 kVA weight of the machine ca.: 7,8 t dimensions of the machine ca.: 3,3 x 1,9 x 2,3 m Accerories main spindle power 16 / 24 kW CNC lathe, NC-tailstock, C-axis with brake, live tooling (10,5 kW, 5.400 rpm), 3-jaw chuck SCHUNK ROTA THW 260-81, chip conveyor, prepared for oilmist suction, parts catcher and belt (right side), coolant device 300l, 8/20bar, accessories (8pcs. live-toolholder...) Fsdpfxexhd Ufj Afpspn approx. 3.000 working hours *

Condition: good (used), Year of construction: 2008, turning length: 2,000 mm, feed rate X-axis: 3,000 m/min, feed rate Z-axis: 3,000 m/min, HeidenHain ND780 3 Axis dro Variomatic RPM speedrange  Steady rest Multi fix Tool system DBC Turning Length: 2000mm Swing over bed Ø: 830mm Swing over cross slide Ø:420mm Swing in the gap Ø: 1000mm Gap length: 295mm Spindle bore: 110mm Bed width: 560mm Tailstock spindle Ø: 105Ø Stroke pinole: 225mm Spindle taper: 6Mk Power: 15kW Speeds / ranges: 2000Rpm Feed rate X-Axis: 3000mm/min. Fpjdpfjxf Ey Rex Afpjn Feed rate Z-Axis: 3000mm/min. Workpiece load: 2400 Length: 3700mm Width: 1900mm Height: 1900mm Weight: 5500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1991, Technical details: turning diameter over bed: 720 mm turning dia. over face-slide: 430 mm turning length: - mm centre distance: 2000 mm control: Zyklengesteuert/cycle controlled revolution per minute: 1-1800 U/min max. torque on the spindle: 3200 /2700 Nm feed motor: 20000 N rapid motion - x-axis: 3,5 m/min rapid motion - y-axis: - m/min spindle passage: 106 mm operating hours - idle run: - h tailstock taper ISO: MK 6 tailstock quill stroke: 225 mm max. workpiece weight between centers: 2500 kg max. workpiece weight -without tailstock: 500 kg voltage: 380/500 V Fsdpfx Afoxfz Auepspn control voltage: 24 V total power requirement: 33 KVA Weight approx.: 5,5 t dimension machine xH: 4 x 2,0 x 5,2 m

Condition: refurbished (used), functionality: fully functional, Machine Specifications: Brand and Model: YOU-JI YV-800A Category: CNC Vertical Lathes Year of Manufacture: 2007 CNC Control: FANUC SERIES 18i-TB Machine Weight: 16,000 kg Machine Dimensions: Length: 4,400 mm Width: 2,650 mm Height: 3,350 mm Total Installed Power: 60 kVA Capacity: Max Swing Diameter: Ø 1,000 mm Max Turning Diameter: Ø 900 mm Max Turning Height: 800 mm Fpodexfblijpfx Afpjn Max Admissible Chuck Load: 3,000 kg Spindle: Spindle Nose: ASA A2-11 Chuck Diameter: Ø 630 mm Spindle Speed Range: 10 – 800 rpm Number of Speed Ranges: 2 ranges (High/Low) Spindle Motor Power (30 min rating): 18.5/22 kW Travel: X-Axis: +810 mm / -50 mm Z-Axis: 880 mm Rapid Traverse: X-Axis Rapid: 20,000 mm/min Z-Axis Rapid: 20,000 mm/min Turret: Number of Stations: 6 Tool Slot Size: 32 x 32 mm / Ø50 mm Accessories: Chip Conveyor: With coolant collection and washdown pump Manuals, Electrical Schematics and CE Declaration: Included

Condition: good (used), Binns & Berry Versa Turn 7 x 7000mm CNC Lathe Serial Number 300013 Year 2011 800mm 4 Jaw, 1000mm Swing Over Bed, 7000mm Between Centres, 104mm Spindle Bore Fpedpfxew U Ulco Afpjn Spindle Speeds 1.5 – 1200 RPM, Main Motor 37kw / 50hp Tailstock, Steadies, 12 station turret, Fanuc OiTD Control Swarf Conveyor

Condition: good (used), Binns & Berry Versa Turn 6 x 6000mm CNC Lathe Serial Number 300014 Year 2011 Fsdpfxsw U Uihj Afpspn 2 x 800mm 4 Jaw Chuck, Front & Rear with 325mm Spindle Bore 325mm Hollow Spindle, Spindle Speeds 1.5 – 550RPM 850mm Swing Over Bed, 6000mm Between Centres, Max Weight 8000kg Main Motor 37kw / 50hp Turn Through Steadies, Fanuc OiTD Control 4 Way Auto Toolpost, Swarf Conveyor

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, HANKOOK MODEL PROTEC 9NC x 4000, UNIVERSAL CNC LATHE WITH 254 MM DIAMETER SPINDLE BORE, REAR 4-JAW INDEPENDENT CHUCK, V8 AUTO INDEXING TOOLPOST & FANUC 21iT CONTROL SYSTEM SWING OVER BED 950 MM SWING OVER CARRIAGE 630 MM MAX.TURNING DIA. 950 MM DISTANCE BETWEEN CENTRES 4000 MM LOAD CAPACITY BETWEEN CENTRES 5000 KG MAX.TURNING LENGTH 4000 MM SPINDLE BORE 254 MM SPINDLE SPEEDS 2 to 1000 RPM NUMBER OF SPINDLE SPEED RANGES 2 – AUTOMATIC SELECTION TRAVERSE RATES MAX PER MIN X: 4M/MIN Z: 6M/MIN NUMBER OF TURRET STATIONS 8 SPINDLE DRIVE MOTOR 37/30 KW TAILSTOCK QUILL TRAVEL 250 MM ELECTRICAL SUPPLY 415V, 3PH, 50HZ Fedpow Nqgrofx Afpjpn FEATURES AND EQUIPMENT REAR 254 MM DIAMETER 4 JAW INDEPENDENT CHUCK, DUPLOMATIC V8 ELECTRIC AUTO TOOLPOST, COOLANT AND LIGHTING, FULL LENGTH REAR CHIP GUARD & SLIDING FRONT DOOR, 250 to 450 MM DIAMETER 3 POINT ROLLER STEADY REST, 150mm DIA BORING ATTACHMENT, STANDARD ACCESSORIES. CE MARKED MACHINE, LENGTH 6470 MM WIDTH 2205 MM HEIGHT 1890 MM WEIGHT 11360 KGS

Condition: used, Year of construction: 1999, functionality: fully functional, Equipment: documentation/manual, For sale is a robust and precise cycle lathe WEILER E90 x 4500, year of manufacture 1999, featuring a large swing diameter and cycle control – ideal for heavy workpieces up to 6000 kg. The machine is in technically good condition and was most recently used in industrial production. It is perfectly suited for single-part and small-batch manufacturing of large components. The machine is equipped with cycle control, a steady rest, and a tailstock with large quill travel. Fedpfxjw Idx So Afpopn

Condition: used, Year of construction: 2008, turning diameter 720 mm turning length 3000 mm centre height 360 mm spindle bore 106 mm turning speed range 1 - 1800 U/min tailstock quill taper MT 6 workpiece weight max. 3800 kg total power requirement 36 kW weight of the machine ca. 6100 kg dimensions of the machine ca. 4800 x 2450 x 2000 mm CNC lathe - cycle controlled Fpjdpfx Aew A Sqmefpen

Condition: used, Year of construction: 2012, functionality: fully functional, turning diameter over cross slide: 720 mm, turning length: 3,065 mm, turning diameter: 650 mm, travel distance X-axis: 362 mm, travel distance Z-axis: 3,100 mm, DOOSAN PUMA 480XLM CNC Lathe – Year 2012 The DOOSAN PUMA 480XLM is a high-power, high-precision CNC lathe, ideal for large-scale machining and maximum productivity. Equipped with a FANUC Series 32i-A control, it offers extensive turning capacity and top-level performance. Main Features: CNC Control: FANUC Series 32i-A Year of manufacture: 2012 Machine weight: 12,700 kg Machine dimensions: 8,100 × 2,340 × 2,410 mm Required power: 68 kVA Machining Capacity: Max swing over bed: Ø 900 mm Max swing over carriage: Ø 720 mm Max turning diameter: Ø 650 mm Max turning length: 3,065 mm Bar capacity: Ø 165.5 mm Chuck diameter: Ø 530 mm Max weight on chuck: 900 kg Max weight between chuck and tailstock: 3,400 kg Max overhang weight: 235 kg Axis Travels: X-axis: 362 mm Fedpswyxuysfx Afpopn Z-axis: 3,100 mm C-axis: +/- 360° (with 0.001° resolution) Spindle: Chuck diameter: Ø 530 mm Spindle speed: 15 – 1,500 rpm Spindle nose: ASA A2-15 Main motor power: 37/45 kW (cont. / 30 min) C-axis angular positioning: 0.001° Turret (BMT 75): 12 stations (including live tooling) Live tool speed: 30 – 3,000 rpm Live tool motor power: 5.5 / 7.5 / 11 kW Tool dimensions: 32×32 mm (turning) / Ø 60 mm (boring) Feeds: Rapid traverse rates: X-axis: 30,000 mm/min Z-axis: 10,000 mm/min Interpolated feed X/Z: 0.001 – 500 mm/rev Tailstock (in cycle): Travel: 1,200 mm Taper: Morse 5 Quill diameter: Ø 120 mm Additional Equipment: Chip conveyor with right-side discharge Hydraulic steady rest min Ø 150 mm – max Ø 420 mm Coolant tank with wash pumps No. 4 live toolholders (2 radial / 2 axial) Various fixed toolholders and jaw sets Manuals, electrical diagrams, and CE Declaration

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 1,105 mm, Tooling package  Chip conveyor Samchully 3 chuck 400 mm with jaws Max. turning Ø: 790mm X-Axis: 352mm Z-Axis: 1105mm Spindle bore: 116.5mm Speedrange: 2000Rpm Spindle power: 37kW ATC / revolver: 10 Speed live tools:4000Rpm Power live tools:25kW Chip conveyor: Yes Tool eye: Yes Fedpfxjwyun Aj Afpspn Pinole taper: 6Mk Stroke pinole: 120mm Quill Ø: 120mm Workpiece load: 1700 Length: 4600mm Width: 2056mm Height: 2195mm Weight: 11050kg

Condition: excellent (used), Year of construction: 2005, turning diameter over cross slide: 580 mm, turning length: 6,000 mm, turning diameter: 850 mm, spindle bore: 130 mm, spindle speed (max.): 1,600 rpm, rapid traverse X-axis: 4,000 m/min, total height: 2,550 mm, total length: 9,800 mm, total width: 3,100 mm, turning diameter over bed slide: 850 mm, overall weight: 14,000 kg, Extended center height to 550 = 1100 swing over bed Double chip conveyor  Motorized tailstock CAPTO Tool system turning & Milling Central lubrication   3e guide way bed construction to support cariage   Box type construction with double prism guide Siemens 810D power Line with Shop-Turn  35841 Power on hours (ca 17.000 spindle hours) Fixed Steady Rest 4 x   SCHUNCK THW 500-128 3 chuck Swing over bed Ø: 850mm Swing over cross slide Ø:580mm DBC Turning Length: 6000mm Spindle bore: 130mm Spindle power: 52kW Fpodpfxewycpbs Afpsn Bed width: 560mm Tailstock spindle Ø: 160Ø Stroke pinole: 315mm Spindle taper: 6Mk Workpiece weight: 7000 Speeds / ranges: 1600Rpm Feed rate X-Axis: 4000mm/min. Feed rate Z-Axis: 7000mm/min. Length: 9800mm Width: 3100mm Height: 2550mm Weight: 14000kg

Condition: good (used), turning length: 6,000 mm, spindle bore: 260 mm, Swing over bed Ø: 850mm Swing over cross slide Ø:500mm DBC Turning Length: 6000mm Spindle bore: 260mm Fpjdowvtg Aepfx Afpon Spindle power: 28kW Bed width: 650mm Stroke pinole: 300mm Spindle taper: 6Mk Workpiece weight: 5000 Length: 10000mm Width: 2100mm Height: 2600mm Weight: 12800kg

Condition: good (used), Year of construction: 2003, Daewoo Heavy Puma 600 CNC Turning Centre with Fanuc Series 18i-T CNC Control, Chuck size 610mm, X axis 900mm, Z axis 1575mm, Spindle speed 1400rpm, 12 Station Turret and programmable Tailstock, Mills Swarf and Coolant Conveyor System, Machine weight 16100 kgs, fitted with Tool Presetter. S/No. PM600042 (2003) Fpodpfxowvbubo Afpen

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, turning diameter over cross slide: 470 mm, turning length: 3,000 mm, turning diameter: 720 mm, spindle bore: 104 mm, CNC Lathe Geminis 4 Plus 720 x 3000 mm Description Manufacturer: Geminis Model: CNC 4 Plus Control: CNC Fagor 8055 FL-BT Capacities: Distance between centers: 3,000 mm Swing over bed: 720 mm Fedpfx Aowuligjfpepn Swing over cross slide: 470 mm Spindle bore: 104 mm Tailstock diameter: 100 mm (Morse 6 taper) Bed width: 550 mm Speeds: 2 speed ranges: 0–1600 rpm Rapid traverse: X-axis: 8 m/min Z-axis: 8 m/min Motor: Power: 22 kW Weight: 8,000 kg Equipment: CNC Fagor 8055 FL-BT 3-jaw SHUNK Rota-S Plus chuck Ø 315 mm Additional 3-jaw chuck Fixed steady rest Chip conveyor General condition: Lathe in excellent condition

Condition: good (used), turning diameter over cross slide: 570 mm, turning length: 6,000 mm, turning diameter: 840 mm, Manufacturer: L&W Type: FB 33240 Control: Siemens 840D Solution Line Year of manufacture: 2021 3-jaw chuck SCHUNK ROTA-S Plus 500-102 3 x Fixed steady rest Duplomatic VDI turret Siemens 840 DSL This type of lathe is commonly used in industries such as: - Oil & gas (pipe threading, tool joint machining) - Steel industry (roll turning) - Power generation (turbine shaft turning) - Heavy machinery manufacturing Specifications Metric US Standard Turning length: 6000 mm Swing over bed: 840 mm Swing over cross slide: 570 mm Spindle bore: 105 mm Spindle power: 33 kW Bed width: 450 mm Quill diameter: 220 mm Spindle taper: 5 MT Spindle speed: 1200 rpm Feedrate X-axis: 5000 mm/min Feedrate Z-axis: 7000 mm/min Workpiece weight: 2500 kg Fsdpfxewtdz Ej Afpepn Dimensions (approximate) Length: 9500 mm Width: 2300 mm Height: 2300 mm Weight: 8600 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute representation or contractual terms. We recommend verifying all critical details.

Condition: good (used), Year of construction: 2003, Hyundai Hit 30M CNC Lathe With Large Amount of Tool Holders and Driven Tooling Package. Driven tooling Simens sinumerik control Kitagawa 12” 3 Jaw chuck B-212 Max Rpm: 3300 Max swing: 580mm Swing on the carriage: 580mm Swing on the cross slide: 400mm Max Cutting Dia: 334mm Max cutting length (shaft): 990mm Standard cutting dia: 290mm Distance between section of main spindle and section of turret: 146-1136mm Max bar work capacity: 90mm Centre height (from ground): 1050mm Max support weight: 1000kg Main spindle nose: ASA A2-8 Main spindle taper: 1/16 Spindle bore: 104 dia Speed range of main spindle: 25-2500rpm Speed variation range of main spindle: Automatic speed variation Type of turret: VDI turret Number of tools: 12 Index time: 0.52 sec/ 1 step Tool size (outer dia): 25 x 150mm Tool size (inner dia): max 50mm Index coupling dia: 200mm Travel: X axis: 290mm Z axis: 1000mm Fpodpswqyhcsfx Afpjn Rapid traverse X: 18m/min Rapid Traverse Z: 24m/min Bed shape: Flat Bed width: 405mm Full automatic tailstock Tailstock quill stroke: 130mm Tailstock quill dia: 100mm Taper (sleeve): MT No5 Maximum thrust: 10kN Tailstock body stroke: 835mm

Condition: good (used), Year of construction: 2003, Machine weight: 8100 kg Brand: FANUC Model: 21i-TB Series Spindle speed range: 3500 rpm Spindle motor power: 18.5/22 kW Spindle diameter: 75 mm Number of tool slots: 12 Rotating tools: Yes Tool holder type: VDI40 Chip conveyor: Yes External coolant: Yes Chip conveyor: Yes Tool positioner: Yes Tool holder: Yes Bar feeder interface: Yes Rotating tool speed: 4000 rpm Fjdpewqx R Asfx Afpopn Rotating tool power: 5.5 kW Bed swing: 650 mm Carriage swing: 300 mm Maximum workpiece length: 1000 mm Diameter from the mandrel: 250 mm

Condition: excellent (used), Year of construction: 2011, FANUC 32i A CNC Control Spindle Hours: 8,541h Technical Details Travel over Slide: 900 mm Turning Length: 3,200 mm Travel over Bed: 1,030 mm Standard Turning Diameter: 750 mm Spindle Bore: 110 mm X Stroke: 471 mm Z Stroke: 2,100 mm Rapid Feed - Longitudinal/Transverse: 15/20 m/min Spindle Speed: 3,000 rpm Spindle Motor: 45 kW Turret: 12/6 BMT 85 Electric Motor: Tools: 7.5/5.7 kW Driven Speed: Tools: 3,000 rpm Total Power Requirement: 62.2 kVA Machine Weight: Approx. 22 t Dimensions: 7,357 x 2,710 x 2590 mm Accessories: Fjdpewqpn Esfx Afpopn 12-position turret for driven tools Hydraulic tailstock Sandvik Capto C6 tool holders – 4 pcs Hydraulic chuck Ø630 mm SMW Autoblock Hydraulic steady rest (min. 110 mm, max. 530 mm)

Condition: excellent (used), Year of construction: 2014, operating hours: 2,000 h, Doosan Puma Heavy Duty CNC Lathe Model: 700 L Year: 2014 - October Control: Fanuc 31i – Model B Turning Dia.: 900mm Turning Length: 3200mm Max Swing: 1030mm Spindle Bore: 160mm Spindle Speeds: To 1500 RPM Machine With: Fpjdpfjwqf U Iex Afpjn 750mm 3 Jaw Power Chucks Programmable Steady

Condition: used, Year of construction: 2014, functionality: fully functional, turning length: 3,200 mm, turning diameter: 900 mm, spindle speed (max.): 1,500 rpm, travel distance X-axis: 470 mm, travel distance Z-axis: 3,235 mm, spindle motor power: 45 W, total height: 2,780 mm, total length: 7,360 mm, quill travel distance: 150 mm, quill diameter: 160 mm, swing diameter over cross slide: 800 mm, overall weight: 21,800 kg, swing diameter over bed slide: 1,030 mm, bar passage: 164 mm, spindle nose: A1-15, Doosan Puma 700L Large Capacity Lathe Fjdpfewqf Uujx Afpopn Built 2014 Accessories include Swarf Conveyor, Tailstock with Mt #6 Taper, SMW Hydraulic Steady, 800mm 3 Jaw Chuck, FANUC 32i Control.

Condition: good (used), Weiler E70 Hollow Spindle CNC Lathe Year: 2003 Distance Between Centres: 2000mm Fpedpfx Afowmqkyepen Spindle Bore: 8" (200mm) Machine with: Front & Rear chucks Tailstock Fixed Steady

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, turning diameter over cross slide: 580 mm, turning length: 3,000 mm, turning diameter: 850 mm, spindle bore: 130 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 7 m/min, feed length Z-axis: 20,000 mm, feed rate X-axis: 16,000 m/min, turning diameter over bed slide: 850 mm, Technical Data SEIGER SLZ-850-3000 Working Area: Distance between centers: 3,000 mm Swing diameter over bed: 850 mm Swing diameter over cross slide: 580 mm Cross slide travel: 500 mm Bed width: 560 mm Turning tool: Cross-section (height x width): 32 x 32 mm Spindle: Spindle nose acc. to DIN 55027: Size 11 Spindle diameter at front bearing: 170 mm Spindle bore: 130 mm Chuck diameter: mm Main drive AC: Drive power 100%/60% duty cycle: 37/52 kW Max. spindle torque: 6,000 Nm Total speed range: 1–1,600 rpm Feed drive AC: X-feed force 100% duty cycle (transverse): 16,000 N Z-feed force 100% duty cycle (longitudinal): 20,000 N X rapid traverse: 4 m/min Y rapid traverse: 7 m/min Tailstock: Quill diameter: 140 mm Quill stroke: 350 mm Quill taper (internal taper): MK 6 Steady rest (fixed): Passage (max.): 450 mm X-axis: Torque: 27 Nm Z-axis: Torque: 50 Nm Additional hydraulics for chuck: Delivery flow: 24 l/min Pump pressure: 50 bar Tank capacity: 90 dm³ Impulse lubrication: Delivery flow: 0.1 l/min Pump pressure: 30 bar Tank capacity: 2 dm³ Circulating lubrication: Delivery flow: 5 l/min Pump pressure: 0.4 bar Tank capacity: 40 dm³ Permissible workpiece weights: Between centers without steady rest: 5,000 kg Between centers with one steady rest: 6,000 kg Between centers with two steady rests: 7,000 kg Flying in the face plate (center of gravity distance 250 mm): 1,800 kg Weights: Machine: 14,000 kg Frame: 3,500 kg Additional hydraulics: 300 kg Electrical control cabinet: 1,000 kg Space requirement: Fpodpfx Afswk Nxdspsn Machine fully assembled with extraction unit: 8,500 x 5,000 x 3,200 mm Machine fully assembled without extraction unit: 8,500 x 5,000 x 2,500 mm Dimensions (L x W x H): Machine, 3,000 mm center distance, without guarding: 6,400 x 2,200 x 2,300 mm Frame: 7,700 x 1,300 x 2,500 mm Additional hydraulics: 800 x 500 x 900 mm Electrical: Supply voltage: 400 VAC ±10% Rated frequency: 50 Hz Max. current consumption: 200 A Control supply voltage: 24 VDC ±10% Main drive power consumption: 52 kW Impulse lubrication pump power consumption: 0.22 kW Circulating lubrication pump power consumption: 1.0 kW Additional hydraulics pump power consumption: 2.2 kW Model designation key: SLZ-850-3000 Lathe: SLZ Swing over bed: 850 Workpiece length between centers Machine has been dismantled, no longer under power.

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, Manufacturer GEMINIS Model GHT4 720×2.000 Year 2002 CNC FAGOR 8055 Capacities Max. Swing Over Bed Max. Ø 720 mm. Max Swing Over Cross Slide Ø 470 mm. Centers height over guide 366 mm. Distance between Centres 2.000 mm. Rapid Feed X/Z Axis 8 m/min Spindle Spindle Nose DIN-55027-11 Main spindle hole 104 mm. Turning Speed 0-1600 Spindle Automatic Ranges 2 Main Motor Power 17/ 20.5 kW. Max torque 1590/1920 Nm Tailstock Ø Tailstock Quill 100 mm Fedpfx Afswgcgmjpepn Tailstock Quill Traverse 200 mm Tailstock Quill Morse 6 Equipment Turret 4 Pos-Automática. Back Protection INCLUDED 3-Jaw universal chuck INCLUDED Fix Steady Rest 50/220 INCLUDED Max allowed weight Max allowed weight between centers 2.560 kg With 1 Steady rest / 2 steady rests 3.200/4.000 kg At air with gravity centre 250 mm 800 kg Others Total power 28 kW Machine weight 4.900 kg. Machine Dimensions 6.600 x 2.300 mm

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 14038, turning diameter over cross slide: 470 mm, turning length: 4,000 mm, turning diameter: 720 mm, spindle bore: 104 mm, spindle speed (max.): 1,600 rpm, Geminis GHT 4 G2 - 700 x 4000 G teach-in lathe with Heidenhain control. Specifications: Heidenhain control Turning diameter over the bed 720mm Turning diameter over the cross slide 470mm Distance between the centers 4000mm Main spindle passage 104mm Speed 0-1600rpm Fpjdpfx Afswf U Elspjn Motor power 17kW Dimensions 6600x2300mm Weight approx. 6500kg Machine equipped with: 4-jaw fixed steady Parrat betel holder with 3 holders Chips conveyor