Numa

Condition: ready for operation (used), Year of construction: 1999, functionality: limited functionality, turning diameter over cross slide: 470 mm, turning length: 600 mm, turning diameter: 570 mm, spindle bore: 79 mm, Error message: Actuator not operational lots of accessories Duedpfx Aox Sw Uvoh Sjl

Condition: good (used), Year of construction: 2005, Ref. -No.: 10475 Manufacturer: SPINNER Type: TC52-MC Year of construction: 2005 Type of control: CNC Control: Siemes 810 D ShopTurn Storage location: Halberstadt Country of origin: Germany Machine-No.: AN0XXXX Turning Speeds: 280/400 RPM Tool holder type: Stahlhalter 9 pcs. Turning Diameter: 280/400 mm Turning Length: 550 mm Tool Taper: VDI 30 Spindle Speed Max.: 5.000 RPM Turret places: 12 Pcs Further information: Three-jaw chuck: Schunk brand Driven tool stations Oil mist extraction Djdpfx Ahjx Sw Hxo Seul Coolant system Cabin, extraction Donaldson Tirit DCE Machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10474 Manufacturer: SPINNER Type: TC77 MCY Year of construction: 2008 Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: AP0XXXXX Chuck diameter: 210 mm Tailstock - diameter: 110 mm Feed speed X / Z: 15/24 mm / min Turning Diameter: 500 mm Max. Torque: 113 Nm Travel -X Axis: 350 mm Travel -Y Axis: 230mm (-110mm +120mm) mm Travel -Z Axis: 1160/1840mm mm Distance Between Centres: 800 / 1500 mm Spindle 1 spindle head diameter (flange): A8 mm Spindle 2 spindle head diameter (flange): A6 mm Quills Morse taper: MK4 Turret places: 12 Pcs Machine length: 3250 mm Machine width: 1980 mm Machine Height: 2090 mm Weight Of The Machine Ca.: 7,5 t Dodox Sw Hrjpfx Ah Soul Max. swing diameter: 690 mm Further information: Spindle head: A8 Bar capacity: 77mm Bar capacity: 52mm Number of rotating tool positions: 12 Y axis + C axis. Machine can be inspected under power by arrangement.

Condition: used, Year of construction: 2001, turning diameter 550 mm Dujdpfex Sr Eiex Ah Sjl turning length 900 mm control Fanuc O-TC weight of the machine ca. 8165 kg

Condition: used, Year of construction: 2000, Installed 2000 Mazatrol 640 T Number of axis: 5 Dusdpfxex Ry Ays Ah Sol Spindle motor power 30 kw Number of tools slots: 40 Max dia: 560 mm Max turning length: 1067 max. spindle speed: 5000 1/min Tool Eye System bar diameter: 51 mm

Condition: new, PUMA 5100XLC (2023. 10) 100% NEW Swing over bed: 870 mm Max. Turning Diameter: 650 mm Max. Turning Length: 3042 mm X axis: 362 mm Dusdpex Rxv Ssfx Ah Sol Z axis: 3150 mm RPM: 1000 Spindle: 2-step gear type Spindle thru-hole diameter: 275 mm OPTIONS LIST - FANUC i Series + iHMI - SAMCHULLY MH-224 (24") - 1 Set of Hard Jaws - Tailstock Center Type: Dead Center MT5 - S/R Programmable Twin Type D45-310_SLU5Z - Long Boring Bar Holder - Coolant Pump 4.0kW / 1.45MPa - Coolant Pressure Switch - Coolant Chiller - Coolant Gun - Oil Skimmer - Mist Collector 2.2kW - 12-Station Turret - Right-Side Hinged Chip Conveyor - Bucket - Automatic Tool Setter - Air Gun - Air Blower for Chuck - Signal Tower - Auto Power Off - AICC 200 Block - Arbitrary Speed Threading - Re-machining Function - Threading Repair Function - Stored Pitch Error Compensation (Ball Screw Pitch Error Correction)

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Okuma LB 3000 MY. * Included equipment value: 20,000–24,000 euros. * 4-axis machine. * Fully independent tailstock, programmable in Z-axis movement and locking via M codes. * 12-station turret, all stations live (motorized). * C-axis. * Y-axis. * Main spindle with built-in motor, 18.5 / 22 kW. * Motor for driven tools: 5.5 kW. * Spindle start-up torque: 620 N·m. * Integrated motor, direct drive without belts or gear steps. * Main spindle nose: A2-8. * Tailstock Morse taper: MT5. * Bar capacity: 75 mm. * Spindle chuck: Kitagawa B-210. * Hardened box ways on all axes. * Main spindle speed: 4,200 rpm. * Driven tool speed: 4,000 rpm. * Swing diameter: 520 mm. * Max turned diameter: 380 mm. * Max turning length: 1,050 mm. * Headstock oil chiller. * IGF OSP P200-L conversational automatic programming system. * Automatic load monitoring and tool consumption monitoring. * Parameterized automatic tool collision avoidance system. Duodpfx Ahsx Nf Eko Ssl * Tool life management and monitoring system. * Rapid traverse speed: 20 and 25 m/min on X and Z axes. * Turret index time: 0.2 seconds. * Renishaw automatic tool measurement arm. * Communication ports: USB, PCMCIA card, and RS 232. * Dual pedal for main chuck and tailstock open/close. * Side chip conveyor, hinged type. * Complete set of external and internal static toolholders. * Complete set of axial and radial driven toolholders. * Electrical transformer. * Documentation: parts list, electrical diagrams, programming, and operation manuals. * Weight: 6,200 kg. * Machine currently in operation. * Immediate delivery subject to prior sale.

Condition: excellent (used), Year of construction: 2010, turning length: 995 mm, spindle bore: 80 mm, Max. turning Ø: 530mm X-Axis: 260mm Z-Axis: 995mm Spindle bore: 80mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:6000Rpm Subspindle bore: 62mm Subspindle power:11kW ATC / revolver: 12 Speed live tools:6000Rpm Tool eye: yes Hours: 2800H Length: 3000mm Width: 1800mm Dujdex I Nbtjpfx Ah Ssl Height: 1900mm Weight: 6350kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1990, condition: used, total length: 4,800 mm, total width: 1,700 mm, total height: 2,000 mm, Empty weight: 5.500 kg Price: On request - Year: 1990 - Documentation available: Yes - CE certificate present: No - Serial number: 3242 - Drive system: CNC - Control system brand: Fanuc - Swing over bed [mm]: 520 - Carriage turning diameter [mm]: 350 - Distance between centres [mm]: 1125 - Spindle bore [mm]: 50 - Min. spindle speed [rpm]: 42 - Max. spindle speed [rpm]: 4200 - Options: Chip conveyor, Turret - └ Tool magazine [pcs.]: 10 - X-axis travel [mm]: 1090 - Y-axis travel [mm]: 160 - Transport dimensions: 4800mm x 1700mm x 2000mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 1 Duedpfxox Ivnye Ah Ssl Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Lathe Hans Schreiner MDB-S900, year 2015, in good condition, 1.5 kW, 900 mm distance between centers, 165 mm center height, 65-1810 rpm, 500 kg. Price changes, errors, and typographical mistakes excepted. Dusdpox H Uiyofx Ah Sel

Condition: ready for operation (used), Year of construction: 2007, turning diameter over cross slide: 300 mm, turning length: 1,100 mm, turning diameter: 590 mm, spindle bore: 82 mm, spindle speed (max.): 2,500 rpm, overall weight: 2,500 kg, Siemens control Multifix turret type C Spindle bore 82mm, max spindle speed 2500 rpm Capacity 1100 x 590mm 300mm on cross slide Weight 2500kg Djdpfx Ahox H R Tho Seul

Condition: good (used), Year of construction: 2021, functionality: fully functional, Description: The machine is in good technical condition and can be tested by prior arrangement. Accessories include: tool holders, tailstock centers, 7 driven tools, tool probe. Available for delivery – 03-04/2026. Dodpsx H Ifbofx Ah Soul

Condition: ready for operation (used), Max. swing over bed: 528 mm Max. swing over cross slide: 370 mm Max. turning length: 785 mm Spindle bore: 77 mm Main spindle speed range: 20 - 3,500 rpm Tool turret: 12 positions Dusdpfx Ahex Hx A Do Ssl Control: FANUC O-T Year of manufacture: 2000 Machine weight approx.: 6,200 kg

Condition: good (used), Year of construction: 1998, Nakamura - Tome SC-450 CNC Lathe with Fanuc Series 21T CNC Control, SMW Autoblok 400mm 3 Jaw Powered Chuck, 12 Position Tool Turret, Tailstock, Swarf Conveyor, Machine Weight 5800kg. S/No. S 451105 - CE Mark Dsdpfjx Hkahsx Ah Soul

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: LU3000EX, Power kVA: 34.2 Dodpfox Hg Eyox Ah Sjul

Condition: used, Year of construction: 2023, Optimum Optiturn TX 5216V – used machine. - Machine bed made from heavily ribbed cast iron - One-piece steel machine base - High rigidity of the spindle head housing due to heavily ribbed 25GG cast iron - Precisely machined saddle - Shafts mounted on needle bearings, all components lubricated in oil bath - Bed guideways hardened and precision-ground - All electronic controls centrally accessible - All feed gearbox gears made from hardened steel - Handwheels decoupled and tested according to EN 23125 - Dual-channel safety electronics - Switches with lifecycle calculation, tested according to EN ISO 13849 - Complete lead screw and feed shaft guard - Full work area illumination - Service-friendly removable rear panel - Hardened and ground faceplate spindle ensures extreme accuracy and durability - Due to the machine’s high cutting capacity, substantial material removal during rough machining is no problem - Energy chain ensures gentle routing of cables and hoses - Lockable chip guard moves with the saddle, featuring integrated position display and coolant hose, manually adjustable - No change gears required - Equipped with safety device to prevent simultaneous operation of thread cutting and feed mechanisms - Electronic feed shut-off for the Z-axis - Coolant system with separate coolant tank, fill level indicator and oil separator; easy, complete draining and cleaning per DIN - Electrical position shut-off with quadruple position stop - 3-jaw chuck included as standard - Quick-change tool post SWH 7-C - Tool holder 32 x 130 type D for 25 mm square tools - Large spindle bore Dimensions and Weights - Length approx. 2925 mm - Width/depth approx. 1195 mm - Height approx. 1930 mm - Weight approx. 2470 kg Working Ranges - Centre height 260 mm - Centre distance 1600 mm - Swing over bed 520 mm - Swing over cross slide 324 mm - Bed width 350 mm Djdpfx Ahjx Hdq Te Seul Speed Range - Number of speed ranges: 2 x 3 steps - Spindle speed range: 12 – 1800 rpm Electrical Data - Output power (motor): 7.5 kW - Total connected load: 5.5 kW - Rated voltage: 400 V - Mains frequency: 50 Hz Coolant System - Coolant pump output: 60 W - Data type: Usage data Tailstock - Mount: MK 5 - Quill stroke: 180 mm - Quill diameter: 72 mm Spindle - Spindle mount: Camlock DIN ISO 702-2 No. 8 - Spindle bore/bar pass diameter: 80 mm - Tool post: SWH 7C - Spindle taper: MK 7 Threading - Metric thread pitch: 0.5 – 15 mm/rev - Number of metric pitches: 55 - Inch thread pitch: 60 – 2 tpi - Number of inch threads: 55 - Diametral pitch: 120 – 4 DP - Number of diametral pitches: 55 - Module thread pitch: 0.25 – 7.5 mm x π - Number of module pitches: 55 Traverse Paths - Top slide travel: 170 mm - Cross slide travel: 340 mm - Carriage travel: 1400 mm Feed - Longitudinal feed range: 0.05 – 1.5 mm/rev - Number of longitudinal feeds: 55 - Cross feed range: 0.025 – 0.75 mm/rev - Number of cross feeds: 55

Condition: not inspected (used), Year of construction: 2002, turning diameter over cross slide: 340 mm, turning length: 2,000 mm, turning diameter: 570 mm, spindle speed (max.): 2,500 rpm, overall weight: 5,000 kg, Fagor 8055 Spindle bore 108 mm Capacity 2000 x 570 mm Steady rest Djdpfx Ahox E Au Ij Ssul

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: F-00334, controller manufacturer: Siemens, controller model: SINUMERIK 802C, MACHINE DETAILS Control brand: SIEMENS Dodpfx Aex D T A Deh Ssul Control model: SINUMERIK 802C

Condition: excellent (used), TECHNICAL SPECIFICATIONS SOMAB UNIMAB 350 CNC TEACH-IN LATHE, used MAIN SPINDLE - Max. diameter over bed: 410 mm - Max. diameter over carriage: 290 mm - Distance between centres: 550 mm - Spindle bore: 52 mm - Spindle speed: 5000 rpm Dsdpfex Dzg Dex Ah Seul - Spindle nose: A1-6'' TAILSTOCK - Quill diameter: 72 mm - Quill stroke: 100 mm DIMENSIONS - Machine dimensions: 2020 x 1530 x H1800 mm - Machine weight: 3400 kg

Condition: good (used), Year of construction: 1980, functionality: fully functional, turning length: 1,580 mm, turning diameter: 510 mm, spindle bore: 80 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 6 rpm, travel distance X-axis: 450 mm, travel distance Z-axis: 1,060 mm, rapid traverse X-axis: 10 m/min, rapid traverse Z-axis: 12 m/min, quill travel distance: 130 mm, overall weight: 6,800 kg, spindle nose: M.T. No. 5, Manufactured by Mazak (Japan) Year of manufacture 1980 CNC control: Fanuc 6T Max. swing, mm 510 Standard cutting diameter, mm 305 Distance between centers, mm 1580 Turret travel, mm: Dusdpox A Tb Dofx Ah Sjl X axis 450 Z axis 1060 Hole through spindle, mm 80 Spindle center, M.T. No. 5 Spindle speed range, rpm 6...3000 Turret rapid traverse, mm/min: X axis 10000 Z axis 12000 Tailstock spindle travel, mm 130 Main drive motor, kW 22 Machine weight, kg 6800

Condition: used, Year of construction: 2012, DMG CTX 620 linear Turning diameter: 600 mm Turning length: 2000 mm Djdpsxzccbjfx Ah Ssul Control: Siemens 840 D powerline Main spindle speed: 2,500 rpm Total power requirement: 72 kVA Machine weight approx. 12 t

Condition: good (used), Year of construction: 1999, Ref. -No.: 10443 Manufacturer: VDF BOEHRINGER Type: 16 M - G Year of construction: 1999 Type of control: CNC Control: REXROTH INDRAMAT SYSTEM 200 BTV 30 Storage location: Halberstadt Country of origin: Germany Turning Diameter: 520 mm Duedpfsxxpabex Ah Sel Turning Diameter Over Slide Rest: 150 mm Spindle Speeds: 25 - 4.500 RPM Spindle Bore: 78 mm Tool Taper: VDI 40 Rapid Traverse: 15.000 mm / min Distance Between Centres: 1110 mm Spindle motor drive: 18 kW Turret places: 12 Pcs Machine length: 5000 mm Machine width: 2800 mm Machine Height: 3200 mm Weight Of The Machine Ca.: 14,5 t Further information: 2x revolver (12 places) Machine can be inspected under power by appointment.

Condition: new, Year of construction: 2025, 0554 mm 2000 mm 277 mm 104 mm 400 mm 2000 U/min Djdpsxxb A Usfx Ah Seul D1-11 DIN 55029 95 mm 145 mm

Condition: good (used), Year of construction: 2007, 770mm Swing, 550mm max. machining diameter, 1100mm Distance between Centres, 2000rpm spindle, Dodpfjxv Tf Nsx Ah Ssul 116mm bar capacity, 10 station turret 26kW spindle motor, FANUC 21iTB control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant, tool setter.

Condition: excellent (used), Year of construction: 2017, 533mm max. machining diameter, Dedpfx Aexugtkjh Soul 584mm cutting length, 3,200rpm spindle speed, 102mm bar capacity, 12 station turret, 4,000rpm milling speed, Y axis -/+ 51mm, 40Hp spindle motor, HAAS control, 254mm, 3 jaw chuck, tool setter, swarf conveyor, coolant, Tailstock, Magazine barfeed .