Van Maele Benelux N.V.

Condition: used, Technical specifications: Saw blade diameter: 350 mm Manual saw feed Max. cutting height at 0°: 140 mm Max. cutting width at 0°: 150 mm Bodpfx Amsziknusbodd Max. cutting height at 45°: 140 mm Max. cutting width at 45°: 100 mm Capability for angled cutting Power supply: 400 V Motor speed: 2800 rpm Motor power: 2.2 kW Overall dimensions: Length: 800 mm Width: 620 mm Height: 530 mm

Condition: used, Technical specifications: Saw blade diameter: 300 mm Manual feed Angle cutting capability Bdjdpjzikm Rofx Ambjd Power supply: 400 V Motor speed: 2800 rpm Motor power: 1.5 kW Overall dimensions: Length: 530 mm Width: 530 mm Height: 520 mm

Condition: used, Technical specifications: Saw blade diameter: 300 mm Manual blade feed Bdsdozikmqjpfx Ambsd Angle cutting capability Power supply: 400 V Motor speed: 2800 rpm Motor power: 1.1 kW Overall dimensions: Length: 530 mm Width: 530 mm Height: 520 mm

Condition: used, Technical specifications: Saw blade diameter: 350 mm Manual feed Max. cutting height: 105 mm Max. cutting width: 140 mm Angle cutting capability Bdodpszikl Hsfx Ambed Max. cutting height at 45°: 105 mm Max. cutting width at 45°: 100 mm Power supply: 400 V Motor power: 2.2 kW

Condition: used, Technical specifications: Max. saw blade diameter: 350 mm Saw feed: manual Max. cutting height at 0°: 150 mm Max. cutting width at 0°: 150 mm Max. cutting height at 45°: 150 mm Max. cutting width at 45°: 105 mm Power supply: 400 V Motor power: 2.2 kW Manufacturer: OMS Overall dimensions: Length: 1040 mm Bdedpfxoziklae Ambod Width: 700 mm Height: 1630 mm

Condition: used, Technical specifications: Bdedjzikk Nopfx Ambjd Maximum cutting height: 130 mm Maximum saw blade diameter: 350 mm Bevel cutting: YES Power supply: 400 V Main motor power: 2.2 kW Overall dimensions: Height: 890 mm Width: 750 mm Length: 800 mm

Condition: like new (used), Year of construction: 2020, functionality: fully functional, power: 2.2 kW (2.99 HP), input voltage: 380 V, type of input current: three-phase, cutting height (max.): 373 mm, cutting width (max.): 218 mm, saw blade diameter: 600 mm, tilt adjustment saw blade: 135 °, height adjustment type: electric, actuation type: electric, rotational speed (max.): 2,800 rpm, rotational speed (min.): 2,800 rpm, total length: 7,800 mm, total width: 2,100 mm, total height: 2,120 mm, overall weight: 2,400 kg, table height: 70 mm, Equipment: CE marking, documentation/manual, saw blade guard, Blades, Ø 600 mm, Digital head tilting, Cutting angles from 20° to 135°, Opening: 5 m, Motor power: 2.2 kW, With a follower conveyor on the movable head: 2500 mm, Retractable intermediate support, 4 horizontal clamps, 2 vertical clamps, Bdsdjzh E Umepfx Ambed FSTCUT4 software, Year 2020.

Condition: excellent (used), Year of construction: 2015, Miter and crosscut saw with a maximum cutting height of 170 mm sturdy gray cast iron construction precise ball bearing guide for the tool carriage on hardened and ground steel shafts manual feed quick miter adjustment up to 65° horizontally adjustable fixed stops lower saw blade guard, connectable to dust extraction Bdsdpfxszhx Ado Ambod Model-----Motor-----Speed-----Cutting length ZS 170: 400 V / 2.0 kW--3500 rpm---410 mm (at 90 degrees) Model-----Cutting height----Miter range horizontal ZS 170 ----- 170 mm----- 45 degrees - 90 degrees Machine stand - Main switch with locking mechanism - Infeed roller conveyor Ro-St60, 3 meters, right-hand - Roller conveyor RLK-ST60 L 3.0 meters, measuring length Heavy-duty length stop/roller conveyor mm - Scale on the rear upright, measuring gauge with magnifying glass and stop flap - Saw blade 420 x 3.5 x 40 Z 84 Neg Location: In stock, 54634 Bitburg - free loading - - immediately available -

Condition: used, Technical specifications: Max. blade diameter: 300 mm Max. cutting height: 110 mm Max. cutting width: 2,800 mm Adjustable blade angle up to 45° Pneumatic clamping system Pneumatic blade lifting Operating pressure: 6 bar Safety switch Power supply: 400 V Motor power: 2.5 kW Bdjdpfxozhubio Ambod Overall dimensions: Length: 1100 mm Width: 3600 mm Height: 1300 mm

Condition: used, Technical specifications: Maximum saw blade diameter: 300 mm Maximum cutting width with two blades: 2700 mm Minimum cutting width with two blades: 250 mm Capability for angled cutting Bdjdpfjzht Tqjx Ambjd Motor power: 2 x 2.2 kW Power supply: 380 V Dimensions: Height: 1300 mm Length: 3600 mm Width: 1000 mm

Condition: used, Technical specifications: Max. blade diameter: 300 mm Bdjdpfx Amjzht Saebod Cutting range: 45° Pneumatic clamping Blade guard Pneumatic blade lifting Operating pressure: 6 bar Safety switch Power supply: 400 V Motor power: 2 x 1.5 kW

Condition: excellent (used), functionality: fully functional, MITRE SAW model OMS SALVARANI FC 300 RAP with dust aspirator second hand machine working conditions : good CE regulation : Yes Bdedpjzghdzefx Ambsd complete with extractor cabinet volt. 380/50 blade diameter mm. 300

Condition: good (used), functionality: fully functional, OMGA Radial 700 radial saw Cutting width at 90°: max. 700 mm Bdodpfjzdy E Ejx Ambjd Cutting height: 125 mm Saw blade diameter: 400 mm Cutting angle adjustment in 3 positions Motor power: 3 kW Machine dimensions: 125 x 130 x 152 cm

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 23022001, tilt adjustment saw blade: 45 °, workpiece width (max.): 80 mm, workpiece height (max.): 70 mm, main saw diameter: 350 mm, production capacity: 1,900 unit/h, This machine is an automatic double miter saw! TECHNICAL DETAILS Process stations: up to 6 Cutting angle: 45° Suitable materials: wood, MDF, strips, profiles, and aluminum, depending on the saw blade Cutting performance / production output Production output: 1,500 to 1,900 cuts/hour Cutting type: simultaneous double miter cut Workpiece dimensions Workpiece width max.: max. 80 mm Workpiece height max.: 70 mm Saw unit Saw blades: 2 x diameter 350 mm Cutting positions: 2 Saw blade position: 45° Bodpfx Amezdkttsbjdd Feed / material feed Feed stroke max.: 1,200 mm Feed stroke optional max.: 1,600 mm Feed length max.: 3,200 to 6,200 mm Vertical feed length: 3,000, 4,000, 5,000, or 6,000 mm MACHINE DETAILS Motor power: 2 x 1.5 kW System: industrial pneumatic system Clamping system: vertical and horizontal pneumatic clamping Software version: 6.0.7.0 Operation: touchscreen, mouse, or external keyboard Programming methods: frame method and list method Production data: production reporting Extraction nozzle: 2 x diameter 80 mm Extraction: prepared for dust and chip extraction Control: PLC / control modules Control cabinet: industrial control cabinet with relays, transformer, circuit breakers, and cable ducts Cooling: forced ventilation Layout / installation dimensions / weight Installation length Layout 1: 6,282 mm Installation depth Layout 1: 1,100 mm Installation length Layout 2: 8,250 mm Installation depth Layout 2: 4,000 mm Installation length Layout 3: 13,952 mm Installation depth Layout 3: 9,000 mm Partial dimension Layout 2: 2,560 mm Partial dimension Layout 2: 2,490 mm Partial dimension Layout 2: 3,200 mm Machine weight: 550 kg EQUIPMENT Automatic double miter cut Vertical or horizontal material feed Primary material gripper system Optional advanced material gripper system Speed-feed servo system Vertical and horizontal clamping device Unloading belt with ejector Kick-out conveyor Pneumatic transfer conveyor Touchscreen control Password-protected software platform Manual control of all machine commands Programming via frame or list method Simulation and visualization of cutting programs Cutting and material optimization Production data acquisition Operating panel with screen and indicators PLC / control modules Industrial relays Mean-Well power supply Transformer Circuit breaker Wiring in cable ducts Forced ventilation Industrial pneumatic actuators Tested connections and hoses Emergency stop Safety devices Prepared for dust and chip extraction

Condition: used, Year of construction: 1982, machine/vehicle number: 27563, functionality: not functional, power: 2 kW (2.72 HP), input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, type of input current: three-phase, total length: 750 mm, total width: 750 mm, ELU / ELUMATEC DG 79 double miter saw – defective / for DIY enthusiasts Selling a used ELUMATEC DG 79 double miter saw. Bdsdsy Ulvaopfx Ambsd The machine is explicitly sold as defective or untested. It is sold exclusively as a DIY project, for spare parts, or for repair. For safety reasons, the machine has been taken out of service. No guarantee regarding function or operational safety. The DG 79 is an industrial double miter saw for aluminum and plastic profiles, featuring a robust machine construction and pneumatic clamps. Technical data Manufacturer: ELU / Elumatec Type: DG 79 Machine type: Double miter saw Saw blade diameter: 380 mm Speed: 2,800 rpm Motor power: 2 × 3 kW Swivel range: 0°–45° left/right Minimum cutting length: 520 mm Maximum cutting length: depending on the model, up to 3,000 mm Cutting range approx. 195 × 120 mm at 90° Pneumatic material clamps Hydropneumatic feed 400 V high voltage Compressed air connection required Condition Used Sold explicitly as defective No guarantee No returns Inspection welcome Loading to be done by the buyer

Condition: new, Number of motors , Stück 0 , mm Control , 0 cutting width 115 und 82 mm Cutting height 55 mm Motor output 2.0 kW machine weight ab. 45 kg KS crosscut saw for cutting (glass) beads with a rebated joint with manual and electronic length stop Suitable for wood, PVC, aluminum ----- Brief manufacturer's description: - Crosscut and miter saw for precise and user-friendly cutting to length in the strip area - Sturdy gray cast iron construction - A double ball-bearing axle acts as a pivot point below the material support table, facilitating material cutting. The cut is always made at the rear top. - Quick miter adjustment up to 45° - Readjustable fixed stops at 90° and 45° - Upper saw blade guard can be connected to extraction system ----- Technical data: Motor: 400 V / 2.0 kW Speed: 2,800 rpm Max. cutting width: 115 mm (at 90°); 82 mm (at 45°) Max. cutting height: 55 mm Mitre range: 45° - 90° - 45° Saw blade diameter: 250 mm Extraction nozzle diameter: 45 kg ----- Technical description: Item 1.1 Crosscut and miter saw type KS, 2 kW, 400 V, 30/40 mm saw blade holder Bedpjy T R Sqofx Ambjdd Item 1.2 Pivot point LEFT Item 1.3 Pneumatic material clamping for KS, on both sides of the saw blade, 2 horizontal pneumatic cylinders, controlled via roller valve during saw stroke, can be switched off Item 1.4 HM circular saw blade for wood 250 x 2.8 x 40 mm 80 teeth neg ----- ----- Price of the above machine on request! Plus packaging and shipping ----- Options with additional charge: Item 1.5: EUR 1,270.00 Digital electronic angle display for one axis, crystal display, 1.5 V battery power supply, reading via magnetic tape and magnetic sensor, resolution 0.1° Item 1.6: EUR 695.00 Machine stand for KS crosscut saw ----- Item 2.1: Electronic length stop with support plate EUR 7,290.00 Electronic length stop type RLE 2.0 m – with support plate Mounting side: LEFT Electronic length stop system for cutting strips Travel distance 1.8 m, overall length 2.0 m 10" touch display, 230 V connection Feed speed 40 m/min Direct measuring system – repeat accuracy +/- 0.1 mm Working mode: (1) automatic absolute stop, (2) cutting lists, (3) pusher cutting lists, (4) step measurement, (5) fine adjustment Program memory for up to 999 cutting lists USB import and direct editing of cutting lists on the terminal Stop can be folded away to the rear With support foot Item 2.2: 295.00 EUR Support 2 m, right, 110 mm wide, with support ----- Item 3.1: Manual length stop EUR 600.00 Length stop 2 m, left, with 110 mm wide support, with scale, foldable stop slider and support Item 3.2: EUR 295.00 Support 2 m, right, 110 mm wide, with bracket ----- (Technical data according to manufacturer - no guarantee!) All prices quoted are net. Plus statutory VAT.

Condition: excellent (used), functionality: fully functional, Saw in very good condition. Includes towing brake. Bsdpoy Tt Hdjfx Ambjdd

Condition: used, cutting width 330 mm Cutting height 135 mm Motor output 2,2 kW The Graule type ZS 135 cross-cut saw is a pivoting cross-cut saw for cutting to length and mitre cuts. Bedjy Tpqlepfx Ambodd

Condition: excellent (used), Working height: 8 cm, pneumatic motor: 2 x 0.9 kW In very good condition. Bedpfsy Tm Hdox Ambedd

Condition: good (used), Code: 0390 Bedey Tk I Sjpfx Ambjdd Brand: OMS SALVARANI Model: FC 350 R - CE Standard Crosscutting machine with base frame for wood, aluminium, PVC, plastic, etc. - CE Standard Technical data Blade diameter mm 350 Three-phase motor Watt 2800 - Rpm 3000 Cutting capacity height mm 145 Cutting capacity width at 45 degrees mm 113 Cutting capacity width at 90 degrees mm 160 Base complete with suction Overall dimensions mm 800 x 600 x 1500 h Weight kg 110

Condition: excellent (used), Motor power: 2.2 kW x 2; Cutting angle: 45° in both directions; Cutting height: 9 cm; Length: 175 cm; Bdedpoy S S Ukofx Ambod Width: 145 cm.

Condition: good (used), functionality: fully functional, Double blade radial saw OMGA RADIALMATIC 900-5 Min./max. working length: 130/2700 mm Cutting height: 125 mm Cutting depth: 825 mm Blade diameter: 400 mm Motor power: 2×3.68 kW Bodpfx Aey Sr H Tombedd

Condition: used, power: 2 kW (2.72 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 135 mm, height adjustment type: mechanical, rotational speed (max.): 3,800 rpm, rotational speed (min.): 3,800 rpm, Graule crosscut and mitre saw ZS 135, max. cutting height 135 mm, max. cutting width approx. 430 mm, saw blade D = 350 mm, mitre adjustment +45°/ 0°/-45°, motor 2 kW, extraction port D = 100 mm, as inspected, ex location Seevetal, without transport, subject to prior sale. Bdodpfxey Sla Ts Ambsd

Condition: used, functionality: fully functional, Crosscut Saw, Mitre Saw OMS FC 350 R 2.2 kW – after technical inspection Specification: • Technical condition: used, after inspection • Manufacturer: OMS • Model: FC 350 R • Blade diameter: 350 mm Bedpfx Amoy Rh D Ejbodd • Saw motor: 2.2 kW • Maximum dimensions of workpiece cut at right angle: 110 x 150 mm (height x width) • Blade guard for operator safety • Extraction port diameter: 60 mm • Cutting angle adjustment: +/- 45 degrees (machine does not maintain perfect extreme angles) • Overall dimensions without tables: 82 x 80 x 76 cm (length x width x height) Additional information: • The machine is in decent technical condition, ready for immediate use • The presented photos show the actual condition of the item for sale • Possibility to power up and test the device on site • The price listed in the auction does not include VAT or transport costs Financing and Transport: • We organise transport with the MDD fleet, courier companies, or external carriers • Financial support available in the form of leasing or lease loan

Condition: excellent (used), Year of construction: 1997, machine/vehicle number: 90F, functionality: fully functional, Double miter saw with circular blades of 250–275 mm diameter and cuts at 45°+45° with fixed fence. The operator performs the 45° horizontal cut by pulling one blade at a time. Wide cutting capacity (120 mm width x 80 mm height). Bjdpfx Amey Iag Tebodd Precise and high-quality cuts in soft and hard woods – PS and all MDF materials. Low noise and high safety standards. Particularly suitable for all picture framers with small production runs.