Ahmet

Condition: excellent (used), Year of construction: 2007, Hz: 50/60 Blsdpfxeyqyb Io Ah Ied V250/300 m3/h P 100 hPa (0.1 bar)

Condition: good (used), MAX APPLI.MOTOR: 11kW / 7.5kW Input: AC3PH 380-480V 50/60Hz 24.0A / 20.0A Output: AC3PH 0-480V / 0-400Hz 23.0A/18.0A Application: Drive control Width: 140 mm Height: 260 mm Depth: 140 mm Weight: 3400 g Condition: Good, second-hand Bedpfxeyqybzj Ah Ield

Condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 40 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm Maximum feed speed: 35 m/min MACHINE DETAILS Year of manufacture: 2005 Number of cycles: 35 million EQUIPMENT Top pressure with rubber belt Panel support guides with NC positioning Pre-milling unit with automatic timed intervention Edge magazine with 48 positions Glue pot for EVA hot-melt adhesive Pre-melter for EVA hot-melt adhesive Laser system: laserTec Roller set for pressing the edge with 5 pressure rollers Panel system PC 22 Safety standard: CE marking Processing units: Bodpfx Aoyqybujh Isld - Pre-milling unit: automatic time-controlled intervention - End trimming unit with 2 motors - Fine trimming unit 1: trimming and rounding, 2 motors, motor power: 0.55 kW, 12,000 rpm - Fine trimming unit 2: trimming and rounding, 2 motors, motor power: 0.55 kW, 12,000 rpm - Edge scraping unit - Glue scraping unit - Buffing unit with 2 motors Spraying device Units mounted on protective covers

Condition: used, Year of construction: 2017, Technical details: x-travel: 560 mm y-travel: 560 mm z-travel: 660 mm control: Celos Siemens 840D SL Operate ERGOline Multitouch turning speeds: 20 - 20.000 1/min spindle drive: 25/ 35 kW max. torque on the spindle: 86 / 130 tool taper: HSK-A63 Number of tool station: 60 diameter of tools max.: 70 mm Tool diameter with no neighbouring tools: 170 mm tool length - max.: 450 mm weight of tools max.: 12 kg Blodpfeyqybbex Ah Iod numbers of pallets: 2 Pallet dimension: 400 x 400 mm max. workpiece diameter: 630 mm workpiece height max.: 900 mm table load: 400 kg rapid travel x/y/z: 60 m/min Feed x/y/z: 60 m/min internal coolant system feed: 70 bar weight of the machine ca.: 8,5 t dimensions: 3200 x 4800 x 2900 mm Accerories Rotoclear window Signal lamp 4 colours Electronic handwheel Probe for tool breakage and length measuring Coolant shower Renishaw probe (spindle) Vorbereitung / preparation only HSK cone cleaning station with brushes Horizontal machining center with Siemens - Celos control, full b-axis, tool magazine with 123 pos. HSK-A 63, coolant through spindle 40 bar. The machine has just received a new milling spindle. *

Condition: good (used), Year of construction: 2018, Internal Article No.: 26030 Digital Height Measuring Device Bodpfsyqya Dsx Ah Isld Mahr Digimar 816CL Year of manufacture: 2018 Includes accessory package (Various probes, charger, spare battery, operating manual) Without measuring plate! You are welcome to inspect the measuring device powered on in over 500 m² of heated storage space. The device comes from an educational institution and is in well-maintained condition.

Condition: used, 3 flanges for type 600 U – available for sale individually or as a set Blsdpfx Aoyqyaweh Ied

Year of construction: 2009, condition: used, 3-axis machining center with automatic tool change for aluminum or PVC profiles Max. travel X-axis: 3,850 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Windows control with USB connections Speed continuously adjustable up to 22,000 RPM handheld control unit minimum quantity spraying Tool changer with 2 magazines (total 10 places plus angle head) tensioner detection and tensioner displacement 2 light barrier ranges and 2 material stops, enabling pendulum operation A total of 8 material clamps Bljdpfxsyqyaqo Ah Ied Spindle in good condition, spindle-insertion force: 12 kN Weight: approx. 2,000 kg

Condition: good (used), Year of construction: 2018, total width: 800 mm, total length: 1,200 mm, total height: 980 mm, overall weight: 1,000 kg, Internal item no.: 26029 Granite surface plate Garant DIN 876/0 Year of manufacture: 2018 Dimensions (LxWxH): 1200 x 800 x 170mm (Height with steel frame: 980mm) Bedpfx Ajyqx U Tsh Ijld Weight: approx. 1000kg The surface plate comes from a training facility and is in well-maintained condition.

Condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS X-axis working range: 6,200 mm Y-axis working range: 1,935 mm Maximum panel thickness: 350 mm DRILLING UNITS Unit: Top Spindles for vertical drilling: 28 Spindles for horizontal drilling in X-direction: 4 Spindles for horizontal drilling in Y-direction: 8 Total number of vertical + horizontal spindles: 40 MILLING SPINDLES Unit: Top Number of controlled axes: 4 Motor power: 10.5 kW EDGE BANDING AGGREGATES Edge roll magazine Number of positions: 3 GROOVING AGGREGATE Unit: Top Unit: Fixed for producing grooves in the X-direction TOOL MAGAZINE Number of positions: 22 Tool: Positioned on the rear side of the machine SAFETY SYSTEMS Front safety mats MACHINE DETAILS Year of manufacture: 2007 Total connected load: 31 kW EQUIPMENT Suction cups for securing the workpiece to be processed Bodoyqx U Hjpfx Ah Iold Vacuum pump Waste chip conveyor

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 209981-002-2018, operating pressure: 448 bar, WIWA Airless 28064 Delivery rate DH: 153 cm³ Bljdpfx Ahoyqx Uts Ied Transmission ratio: 64:1 Max. material temperature: 80 °C Max. operating pressure: 448 bar Max. inlet pressure: 7 bar Weight: 80 kg Serial no.: 209981-002-2018 Further information available on request.

Condition: good (used), Year of construction: 1992, fuel type: diesel, Forklift STEINBOCK BOSS QX25D duplo395 WITH FORK POSITIONER 1992 DIESEL Video can be sent via Whatsapp. Continuous stock, see website. Prices are ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without warranties (see our general terms and conditions). To arrange a viewing and/or test drive, you can make a non-binding appointment. Please call in advance as we are not always present. Van de Wert Trading B.V. Bjdpfeyqx Umox Ah Ijld Bedrijfsstraat 3 5391 LR Nuland

Year of construction: 2006, condition: ready for operation (used), functionality: fully functional, working width: 1,200 mm, working height: 1,600 mm, working length: 1,200 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum working width: 1,200 mm Maximum working length: 1,200 mm Maximum working height: 1,600 mm MACHINE DETAILS Total power: 1.5 kW EQUIPMENT Bodpeyqx Ugsfx Ah Isld CE marking, safety regulations The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection, and is responsible for the installation, securing, and operational use of the machine at the destination. External reference: 6724

Condition: good (used), Year of construction: 2000, operating hours: 3,700 h, Forklift HYSTER H3.00XM triplo465 freelift sideshift, 3700 hours, year 2000, DIESEL. Video available on request via Whatsapp. Continuous stock, see website. Prices are ex Nuland. Bsdpeyqx Uaefx Ah Isld Van de Wert Trading B.V. maintains a varying stock of machines, trucks, trailers, and attachments. All deliveries are at trade prices and under AS-IS conditions without warranty (see our general terms). For a viewing and/or test drive you can make a non-binding appointment. Please call in advance, as we are not constantly present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 120 mm, workpiece width (max.): 230 mm, controller model: Siemens Simatic Panel Touch, workpiece length (max.): 8,483 mm, TECHNICAL DETAILS Minimum working height: 6 mm Maximum working height: 120 mm Minimum working length: 370 mm Maximum working length: 8,483 mm Minimum working width: 25 mm Maximum working width: 230 mm Maximum feed speed: 12 m/min Rubber-coated feed rollers: 1 Toothed feed rollers: 4 Total number of rollers: 5 MACHINE DETAILS Control system: Siemens Simatic Panel Touch Processing unit 1 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Processing unit 2 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Max. tool diameter: 4 mm Processing unit 3 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Processing unit 4 Motor power: 5.5 kW Shank diameter: 40 mm Shank length: 240 mm Automatic chip ejection power: 24 kW EQUIPMENT Safety standard: EC marking Bledpeyqx T Ajfx Ah Iod The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photo documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7243

Condition: used, Year of construction: 2020, Overview This chamber pasteurizer was manufactured in 2020 by German company RICO. The machine is designed for pasteurization processes and was previously in operation at a brewery. The equipment is no longer required by the seller and can be visited at any time on request. Technical data  Application: Pasteurization Configuration: Chamber pasteurizer 4x1, indoor installation Bedpfx Aoyqx Tpjh Isld

Condition: good (used), Internal article no.: 26031 Universal milling machine Deckel FP1 Infinitely variable feed + Various SK40 tool holders + Collet set (S20x2) + Hydraulic machine vice Röhm 110 The servomotor has been overhauled! Travel: X300 / Y160 / Z340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Bledpfx Aoyqx S Esh Ijd Feed: Infinitely variable 5-500 mm/min The machine is fully functional and can be inspected under power, by appointment, in a heated storage area of over 500 m².

Condition: good (used), mileage: 476,184 km, power: 272 kW (369.82 HP), first registration: 10/2014, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, fuel: diesel, gearing type: automatic, number of gears: 12, emission class: euro6, Year of construction: 2014, Equipment: AdBlue, air conditioning, central locking, cruise control, fog lights, onboard computer, soot filter, = Further options and accessories = - Front work lights - Heated mirrors - Windscreen - Enclosed cab - Cab - Air suspension - Particulate filter - PTO (power take-off) = Remarks = Volvo FM370 6x2*4 – HIAB X-Hiduo 188 E-5 Crane with remote control – Euro 6 MY: 23-10-2014 KM: 476184 YV2X922C1EA768827 HIAB Crane with remote control Rear steering axle Euro 6 I-Shift Sideboards = Further Information = Transmission Transmission: I-Shift, 12-speed, automatic Axle Configuration Front axle: Tyre size: 385/55R22.5; Max. axle load: 9,000 kg; Steered; Left tyre tread: 40%; Right tyre tread: 40% Rear axle 1: Tyre size: 315/70R22.5; Twin tyres; Max. axle load: 11,500 kg; Left inner tread: 50%; Left outer tread: 50%; Right inner tread: 50%; Right outer tread: 50% Rear axle 2: Tyre size: 385/55R22.5; Max. axle load: 7,500 kg; Steered; Left tread: 50%; Right tread: 50% Weights Unladen weight: 14,363 kg Payload: 13,636 kg Gross vehicle weight: 27,999 kg Functional Details Body manufacturer: HIAB X-Hiduo 188 E-5 Condition Bljdpfx Ahjyqx Sxe Iod Technical condition: good Visual condition: good

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 710 mm, turning diameter: 710 mm, spindle motor power: 11,000 W, spindle speed (min.): 38 rpm, spindle speed (max.): 3,800 rpm, travel distance X-axis: 690 mm, travel distance Y-axis: 115 mm, travel distance Z-axis: 1,545 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 40 m/min, rotational speed (max.): 6,000 rpm, type of input current: three-phase, spindle nose: JIS A2-8, overall weight: 14,000 kg, tool length: 300 mm, tool weight: 10 g, travel distance W-axis: 1,550 mm, Equipment: documentation/manual, Turn mill center OKUMA Multus B400 TECHNICAL CHARACTERISTICS: CNC control: OSP-P200L Distance between centers: 1500 [mm] Max. cutting diameter: 710 [mm] Height of centers over cariage: 710 [mm] Stroke X axis: 690 [mm] Stroke Y axis: -115 / +115 [mm] Stroke Z axis: 1545 [mm] Stroke W axis: 1550 [mm] B axis indexing precision: 0.001 [°] Milling head max. speed: 6000 [rpm] Max. milling spindle power: 11 [kW] Max. milling spindle torque: 65.7 [Nm] Coolant milling head: HSK-A63 Tool magazine capacity: 40 Max. tool length: 300 [mm] Max. tool diameter: 130 [mm] Max. weight of single tool: 10 [Kg] Rapid traverse rate X axis: 4000 [mm/min] Rapid traverse rate Z axis: 40000 [mm/min] Rapid traverse rate Y axis: 26000 [mm/min] Rapid traverse rate W axis: 12000 [mm/min] Spindle nose: JIS A2-8 Min. spindle speed: 38 [rpm] Max. spindle speed: 3800 [rpm] Increment C-axis: 0.001 [°] Supply voltage: 400 [V] Weight: 14000 [Kg] INCLUDED EQUIPMENT: 1 × One-Touch IGF software option 1 × ATLING 2-point steady rest, type AX8I-NAOS (Ø85–360 mm) 1 × SMW AUTOBLOK 3-jaw chuck Ø340 mm, type KNCS-N-340-117 1 × Chuck clamping pressure regulator 1 × Parts catcher 1 × NC tailstock 1 × MARPOSS T18 tool probe Bedpfx Aheyqx Rzj Ield 1 × Remote electronic handwheel 40 × HSK-63 tool holders 1 × 2-color status signal lamp 1 × Chip conveyor 1 × Coolant tank 1 × Transformer 1 × Complete set of manuals + OKUMA CD Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to brands such as Mazak, DMG Mori, Index Traub, Doosan, Hermle, Chiron, and Biglia. Also includes lathes, mill-turn machines, and milling machines.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 21,990 h, functionality: fully functional, machine/vehicle number: 0903, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Travel distance 3000 x 800 x 1100 mm (X-Y-Z) Heidenhain iTNC530 control Handwheel Bodpfx Aoyqx N Doh Isld 48 tools in the chain Motor spindle 12,000 rpm / 30 kW / 198 Nm Tool holder HSK63 Direct measuring systems in all axes ICS 20 bar with band filter system, capacity 450 liters Mounted NC rotary table for H/V, diameter 500 mm 3D probe Renishaw Tool touch probe Renishaw New motor spindle, new X-axis ballscrew, geometry aligned, major maintenance carried out.

Condition: good (used), Year of construction: 2001, clamping force: 250 kN, screw diameter: 18 mm, clearance between the columns: 220 mm, displacement volume: 20 cm³, injection pressure: 2,500 bar, injection weight: 18 g, General information Year of manufacture: 2001 Control system: Selogica Weight: 2,000 kg Dimensions (L × W × H): 2.9 × 0.9 × 1.9 m Clamping unit Clamping force: 25 t Tool clamping system: 250 / … Plate dimensions: 400 × 400 mm Clearance between tie bars: 220 × 220 mm Maximum distance between plates: 425 mm Injection unit Injection unit: … / 60 Screw diameter: 18 mm Screw L/D ratio: 24.5 Specific injection pressure: 2,500 bar Injection volume: 20 ccm Shot weight: 18 g Ejector Ejector force: 18 kN Bjdpfx Aheyqx Hvj Ijld Ejector stroke: 95 mm

Condition: new, Type 1000-2S metal Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Metal shaft 7.5KW Grinding motor 2.2KW Feed motor 1.5 kW Lifting motor 0.37KW Bsdpfxoyqx Dbj Ah Iold Total motor power 11,57 kW Transport dimensions 1600x1650x1450mm Weight 750 kg Price 6700 Eur (EXW Jonava, Lithuania)

Condition: new, spindle bore: 51 mm, turning diameter: 360 mm, turning length: 1,000 mm, – Centre distance 1000 mm – Swing diameter over bed 360 mm – Swing diameter over cross slide 230 mm – Spindle bore 51 mm – Longitudinal and cross feed – SINO digital readout on two axes – Brake – Coolant system – Lighting Bedpfx Ahoyqx A Ds Isld – Protective cover – Fixed steady rest – Follow rest – Three-jaw chuck – Four-jaw chuck – Emergency stop – Documentation – 400V

Condition: used, Year of construction: 2016, Milling machines Travel distance X: 760 mm Travel distance Y :430 mm Travel distance Z: 460 mm Number of axis: 3 milling machine / machining center Control: Siemens Sinumerik 828D CNC spindle chuck: SK40 spindle revolutions: 10000 rpm Speed range from: 10 U/min Speed range to: 10000 U/min table size X: 900 mm table size Y: 410 mm max. workpiece weight: 350 kg tool changer: 16 - time input Power : 12 kW Rapid traverse: 24 m/min Bjdpfxjyqxy As Ah Ijld feed rate: 10000 mm/min control Siemens

Condition: used, New: No Part suitable for: trucks Bedpoyqxyvjfx Ah Iold Price: On request VAT/differential taxation: VAT deductible Type number: 5937529/16055262

Condition: used, machine/vehicle number: 006376, Max. panel width: 1000 mm Max. panel length: 2500 mm Blsdpfjyqxypox Ah Iod Length of conveyor: 10000 mm Panel return for edgebander: Left