Digisign

Condition: ready for operation (used), nominal power: 65 kW (88.38 HP), H&C Fours ETG 250°C Max temperature: 250 °C Capacity: 2650 x 2400 x 1950 mm Voltage: 400V Hnjdpfxjxpgdfs Afpju

Condition: ready for operation (used), H&C Fours 700°C 1000 x 1100 x 1000 mm Max temperature: 400°C Hjdpfxjxpgdle Afponu

Condition: ready for operation (used), Raim KP 450 - Ø 450 mm Hsdpfx Afjxpggtopjnu

Condition: ready for operation (used), BELANGRIJKSTE KENMERKEN: Tafelafmetingen: 3000 x 3500 mm Omgeschreven cirkel: 4300 mm Toelaatbare belasting (gelijkmatig verdeeld): 50 ton op 3000 x 3500 mm Totale tafelhoogte zonder cilinder: 1.250 m Aantal T-gleuven, breedte 36 H7: 13 T-sleufafstand: 250 mm Lengteverplaatsing: 2700 mm Longitudinale voedingen / bed: • positionering: 2 mm/min • werkend: 1 tot 3000 mm/min • snel: 3000 mm/min Circulaire feeds: • werkend: 0,0006 tot 0,6 tpm • snel (50-tons belasting): 0,6 tpm Nominaal koppel van longitudinale motor/bed: 9,4 mkg Nominaal koppel van cirkelmotor/tafel: 22 mkg Totaal geïnstalleerd vermogen: 50 kVA Tafelgewicht (zonder elektrische apparatuur): 31.000 kg Hjdpfxsxpggye Afponu

Condition: ready for operation (used), LVD 200 x 6 mm (variable) Capacity: 200 x 6 mm Fixed angle -- variable angle: variabel Hnodpfexpghkjx Afpju Driven: hydr.

Condition: ready for operation (used), power: 2 kW (2.72 HP), empty load weight: 550 kg, total length: 800 mm, total height: 1,200 mm, Haco 220 x 4 mm (fixed) Hnedpjxpghwefx Afpju Capacity: 220 x 4 mm Strokes/min: 35 Fixed angle -- variable angle: fixed: 90° Driven: hydraulic Workspace: 650 x 650 mm Work height: 890 mm Depht: 660 mm

Condition: ready for operation (used), Type: Ti 1800 Hedpfx Afsxpgkljpenu Turning table 1800 x 2000 mm Cap on Table: 15.000 kg 360° turnable cross displacement: 1250 mm 6 kW T-slot width: 28 mm T-slot distance: 160 mm Length: 3700 mm Width: 2100 mm Weight: 7600 kg Dia / Dimensions: 1800 x 2000 mm

Condition: ready for operation (used), broach with movable supporting steady-rest stroke: 1230 mm Hodpfx Aoxpgkxefpenu Type H-10-48 Max draw strenght: 10 ton

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 22359, Equipment: UVV, Compact design allows storage and transport in the smallest of spaces. The ideal solution when large amounts of light are temporarily needed. Suitable for all types of lighting applications, such as construction sites, roadworks, events, film and photography, or securing hazardous areas. The light balloon can be mounted on work machines and thus ideally illuminates the operating area of the equipment. Energy-saving LED technology with high light output. Hodpexn S Duefx Afpsnu

Condition: new, functionality: fully functional, gearing type: automatic, color: orange, empty load weight: 7,650 kg, Year of construction: 2024, machine/vehicle number: 162923240, Equipment: AdBlue, The machine is designed for pumping concrete in construction and installation works, foundations and pilot activities as well as tunnel construction. Maximum speed 2300rpm, Engine TDC 6.1 L, diesel Stage V. Weight 7650kg. Date of manufacture 2024. Chain undercarriage, maximum speed 2.6km per hour. Maximum hydraulic pressure 320 bar Hsdjxn Nlcopfx Afpjnu Cylinders 125/80mm*1400mm Maximum concrete flow rate 102 cubic meters per hour

Condition: new, With this offer, you are purchasing a new ‘Apodis Airguard 1000’ air purifier. Item for sale: 1 x Apodis Air Guard with the following specifications: As an experienced medical technology company specialising in filter systems, it was only natural for us to offer this quality for the home, waiting room or office. With the AIR GUARD 1000, we have succeeded in developing a product that is perfect for smaller rooms while maintaining the same professional quality. Whether due to the current situation, the next flu season or for allergy sufferers, the AIR GUARD filters harmful aerosols, viruses, bacteria, pollen and dust from the air before it is returned to the room. Condition: Hnjdoxn Hy Depfx Afpou This offer is for a new device. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Year of construction: 2018, condition: ready for operation (used), This DR. HOCHSTRATE SBM 3000/6 was manufactured in 2018. It features a PLC control system, operates on 400/50 V/Hz with a power of 7.5 kW, and handles sheet bending up to 6 mm thick and 3000 mm wide. It includes hydraulic clamping and programmable rear stops. Consider the opportunity to buy this DR. HOCHSTRATE SBM 3000/6 Folding Machine. Contact us for more information. Hodoxn Dmnepfx Afpjnu Application Types Other Sheet Metal Machinery

Year of construction: 2020, condition: used, SPITZENBERGER & SPIES – On-Board Power Supply Simulation System PAS 15000/GN/KFZ/OPD The following tests can be performed according to the specifications: • Audi BDM LAH XXX.915.181.XX • ISO 7637-2 • ISO 16750-2 • ISO 21848 • LV 124 • SAE J 1113-11 • VW TL 80101 • VW TL 82066 Hodpoxn Dfdefx Afpjnu • VW TL 82366 The system includes: • Power Supply NT 15000/GN/Kfz • SyCore • Two-Quadrant Amplifier PAS 15000/GN/Kfz • Surge Protection Device OPD 15000/GN/Kfz Condition: Inspection required. Price: €8,999.00 Pickup location: 58-500 Jelenia Góra, Poland. Device weight approx. 1000 kg. Damage: Display – F VAT invoice included

Year of construction: 2016, condition: used, Power: 11 kW (15 HP) // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) – Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% – 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L – EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 – EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter Hnodpfsxn Az Rex Afpeu D) Vacuum unit: SAURUS939 piston vacuum pump, model VVDPump support benchATEX: Ex-d-IIB-T4 – IP55Power: 11 kWAtmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit – AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar – Jacket temperature: 142°C – Surface area: 1.65 m² Cooler, mounted on the heater: cold water or brine – Pipe jacket pressure: 12 barg – Jacket temperature: 142°C – Pipe temperature: -10°C /+ 99°C – Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: used, Year of construction: 2004, functionality: fully functional, 3630 kg / hour continuous rating, 188C saturation temp working pressure 10.0 bar g design pressure 11.0 bar g hydraulic pressure 16.5 bar g Hnsdsxnzgrepfx Afpou control circuit 240v electrical supply 415v 3ph 50hz

Condition: used, surface 4000x1500x270mm, weight 3500kg, 2 plates Hsdpfx Afoxnwnrspenu

Condition: used, machine/vehicle number: 46-1056, overall weight: 52 kg, This inductive shrink fit device SECO-epb EasyShrink 20 is being auctioned online in our industrial auction/machinery auction for mechanical engineering companies – machinery park clearance & restructuring. Hnjdoxnqi Nspfx Afpsu

Year of construction: 2019, condition: excellent (used), functionality: fully functional, 120 mm cold feed vacuum rubber extruder (20D) suitable for rubber production (EPDM, SBR, NBR). Siemens motor, 0-50 r/min. Total power 155 kW. Hnjdpfsxnpx Njx Afpeu

Condition: ready for operation (used), functionality: fully functional, Gas inlet: AR Alternatre Gas inlet. Hnsdpfexnpw Ejx Afpsu Good working condition. Please check out our other listings as well.

Year of construction: 2014, operating hours: 10,083 h, condition: used, functionality: limited functionality, We are selling a water jet from the Czech manufacturer PTV. It has been non-functional for 4 years now. Surplus stock. Hedpfx Aoxnm R Nsfponu

Condition: excellent (used), functionality: fully functional, overall weight: 23 kg, Year of construction: 2016, machine/vehicle number: 20161500027, Cutting of openings up to a maximum depth of 400 mm is possible in several work steps. Suitable for creating cut-outs and channels in concrete or masonry. Optimized engine performance thanks to efficient cylinder design, digital ignition system, and X-Torq engine technology. Cutting disc pair with very stable core and excellent cutting performance. Hnedoxnm Ihspfx Afpsu

Condition: used, Alluris SMS-400 Strobovision, In Flight Case with Associated Cables & Manual. S/No. TS - 10678 - CE Mark Hedpoxnmnusfx Afpjnu Please Note: These lots are located in Ferrara, Italy. All/Any tooling is being offered as specifically described.

Condition: used, power: 2 kW (2.72 HP), color: black, overall weight: 120 kg, Year of construction: 2018, Air output: 32200 m3/h Speed: Variable Waterreservoir: 180 L Hnedjxnmmwspfx Afpou Noise: 50db~70db Dimensions (cm): 186(H)×155(W)×81(D)cm Weight: 120 kg Power consumption: 1.35 kw ( 1250Watt ) If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Year of construction: 2018, condition: used, Cemb ZB 300 TC/GV Horizontal Balancing Machine, Capacity Weight 3kg to 300kg, Max Rotor Diameter 1000mm, Distance between Support Bearings 180 - 1050mm. S/No. 307554 (2018) - CE Mark Please Note: These lots are located in Ferrara, Italy. All/Any tooling is being offered as specifically described. Please Note: Dismantling and Loading will be carried out by our own supplier. More information to follow... Hedpfxsxnl Tio Afpjnu

Year of construction: 2019, operating hours: 325 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: BL 6000000, TRIVENTEK BL60 DRY ICE BLASTING MACHINE Includes 6 m blast hose + ice gun (applicator). Nozzle box and special ice splitter nozzle included. 325 operating hours Machine in good condition, immediately ready for use. Worldwide Shipping. Cold Jet dry ice machine for sale dry ice machine for sale dry ice blasting machine for sale Dryice blaster for sale buy dry ice blasting machine Dry ice blasting machine – dry ice blasting | dry ice machine | dry-ice blaster Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Hsdpfx Afsxnl Akjponu Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machine for sale Dry ice blasting machine for sale Dry ice blasting machines Cold Jet various models Servicing and repair of Cold Jet dry ice machines