Styromax

Condition: ready for operation (used), A comprehensive spare parts package for the Arburg Allrounder 221 series is available. 1) Mechanics/Hydraulics/Plasticizing: 6x ejector piston rod, 3x pressure relief valves, clamping cylinder seal kit, 5x ejector seal kit, injection unit seal kit, cylinder D30, screw D30, 20x disc spring D31,5/16,3. 2) Heating/Temperature: 6x barrel heaters 1750W, 5x nozzle heater band 600W, Thermomat, 40x thermocouples. 3) Electrical/Sensors/Switches: 2x coding switch blocks, 6x contact sensors, 5x rocker switches, 2x snap-action switches, 9x switches, 8x microswitches, 2x limit switches, 10x ejector safety switches, 4x initiators, oil level switch, 6x contact pins with contact, 2x pulse counters. 4) Electronics/Control: printed circuit board ARB 279, 2x each membrane keypad ARB 179 and 180, printed circuit board shutdown automation 141, 2x printed circuit board ARB 550, printed circuit board ARB 554. Only package sale is possible. Documentation available. On-site inspection is possible. Kedpfx Abeycig Do Iewt

Year of construction: 2008, operating hours: 26,580 h, condition: ready for operation (used), controller manufacturer: BATTENFELD, controller model: UNILOG B6, overall weight: 4,600 kg, screw diameter: 40 mm, This Battenfeld HM 100/525 was manufactured in 2008. A hydraulic injection moulding machine with a screw diameter of Ø40 mm and injection volume of 251 cm³. It features tie bar spacing of 470 x 420 mm and has been operating for approximately 26580 hours. Currently used with a Battenfeld UNIROB R10S robot for producing polypropylene containers. Net weight is 4600 kg. Contact us for more information about this machine. Kwedpfsychvqex Ab Iet • Total operating hours: approx. 26,580 h • Current application: Producing PP (polypropylene) containers; currently running with a robot (see Additional equipment) • Injection unit: • Injection volume: 251 cm³ • Clamping unit: • Tie bar spacing: 470 x 420 mm • Number of core pulls: 1 Additional equipment • Robot: • Manufacturer: BATTENFELD • Model: UNIROB R10S • Year of manufacture: 2007 • Type: Cartesian handling robot

Year of construction: 2014, operating hours: 36,714 h, condition: ready for operation (used), controller manufacturer: BATTENFELD, controller model: UNILOG B6P, overall weight: 6,500 kg, screw diameter: 50 mm, This Battenfeld HM 150/750 UNILOG B6P was manufactured in 2014. It features a screw diameter of Ø50 mm and an injection volume of 441 cm³. The tie bar spacing is 520 x 470 mm, and it has operated for approximately 36714 hours. Ideal for polystyrene processing, this hydraulic injection moulding machine weighs 6500 kg. If you are looking to get high-quality injection molding capabilities, consider the Battenfeld HM 150/750 UNILOG B6P machine we have for sale. Contact us for more information. • Injection volume: 441 cm³ • Clamping unit: • Tie bar spacing: 520 x 470 mm • Number of cores: 1 • Operating data: • Total operating hours: approx. 36,714 h Kjdpfx Abjychiqj Iowt • Hydraulics & electrics: • Hydraulic system pressure: 277 bar • Type of current: 3-phase + N • Frequency: 50 Hz • Rated voltage: 400 V • Current application: • Material: Polystyrene (PS)

Year of construction: 2019, operating hours: 21,800 h, condition: ready for operation (used), controller manufacturer: BATTENFELD, controller model: UNILOG B8, screw diameter: 35 mm, This WITTMANN Battenfeld EcoPower 110/350 was manufactured in 2019. A robust electrical injection moulding machine featuring a screw diameter of Ø35 mm and an injection volume of 168 cm³. With tie bar spacing of 470 x 420 mm, it's currently producing with polystyrene. Total working hours are approximately 21800, maintaining a very good technical condition. Contact us for more information about this machine. • Injection volume: 168 cm³ Kwjdpfxjyca Sko Ab Ijt • Tie bar spacing: 470 x 420 mm • Number of cores: 1 core • GK: x4 • Total working hours: approx. 21,800 h • Machine currently in production: Yes • Material: Polystyrene (PS) • Technical condition: Very good

Year of construction: 2001, condition: ready for operation (used), This Krauss Maffei 125-520 C1 was manufactured in 2001. It features a MC4 controller, Euromap Interface 12, and a screw diameter of 50 mm. With a maximum pressure of 1521 bar and an injection volume of 340 cm³, it is ideal for precision moulding tasks. Contact us for more information. Machine Benefits Technical Machine Benefits • Screw diameter: 50 mm/ max. Pressure: 1521 bar / max. Injection volume: 340 cm³ Kodpfxoyary Us Ab Iswt • Euromap interface: 12 / hydraulic units: 1 / air units: 1 / hot nozzle zones: 1

Year of construction: 2000, condition: ready for operation (used), This Krauss Maffei 110-520 C1 was manufactured in 2000. It features a MC4 controller, Euromap Interface 12, and a hydraulic unit. With a screw diameter of 45 mm, it offers a maximum pressure of 1878 bar and an injection volume of 275 cm³. Consider the opportunity to buy this Krauss Maffei 110-520 C1 hydraulic injection moulding machine. Contact us for more information. Additional equipment • Euromap Interface: 12 / Hydraulic Units: 1 Kjdpfxjyaryus Ab Iswt Machine Benefits Technical Machine Benefits • Max. Pressure: 1878 bar / max. Injection volume: 275 cm³ • Hot nozzle zones: 1 / screw diameter: 45 mm

Year of construction: 2010, condition: ready for operation (used), overall weight: 8,800 kg, This Kloeckner Desma 968.250 ZO was manufactured in 2010. A hydraulic injection moulding machine, it represents a reliable option for precision moulding tasks. Consider the opportunity to buy this Kloeckner Desma 968.250 ZO hydraulic injection moulding machine. Contact us for more information. Additional equipment • 2 ejectors • Vacuum pump Kwodpfxeyaqdfj Ab Ist Machine Benefits Technical Machine Benefits • Clamping force: 2700 kn / 280 us tons • Injection volume: 2000 cm³ / injection pressure: 1730 bar / nozzle force: 75 kn

Year of construction: 2015, operating hours: 38,845 h, condition: ready for operation (used), controller manufacturer: FANUC, overall weight: 4,400 kg, screw diameter: 16 mm, This FANUC Roboshot S50iA was manufactured in 2015. It's an electrical injection moulding machine with a closing force of 50 tons and a screw diameter of 16/20mm. It weighs 4.4 tons and operates on a power supply of 200 V~50/60 Hz or 220 V~60 Hz. Consider the opportunity to buy this FANUC Roboshot S50iA electrical injection moulding machine. Contact us for further details regarding this machine. • Power supply: 200 V∼50/60 Hz, 220 V∼60 Hz Kwedeyam Hispfx Ab Ijt

Year of construction: 2014, operating hours: 44,382 h, condition: ready for operation (used), controller manufacturer: FANUC, overall weight: 4,400 kg, screw diameter: 26 mm, This FANUC Roboshot S100iA was manufactured in 2014. It features a closing force of 100 tons and a screw diameter of 26mm. Weighing 4.4 tons, it operates on a power supply of 200 V~50/60 Hz or 220 V~60 Hz. Consider the opportunity to buy this FANUC Roboshot S100iA electrical injection moulding machine. Contact us for more information. Kwedpfx Asyam Hcjb Iet • Power supply: 200 V AC, 50/60 Hz; 220 V AC, 60 Hz

Year of construction: 2016, condition: ready for operation (used), controller manufacturer: FANUC, screw diameter: 26 mm, This FANUC Roboshot S100iA was manufactured in 2021. It features a 100 ton clamping force, ideal for precision electrical injection moulding. Consider the opportunity to buy this FANUC Roboshot S100iA electrical injection moulding machine. Contact us for more information. Kwodpfx Aoyam E Ssb Ist • 35,099h = screw diameter 32 mm • 32,691h = screw diameter 32 mm • 29,023h = screw diameter 26 mm

Year of construction: 2008, operating hours: 3,200 h, condition: ready for operation (used), screw diameter: 60 mm, This Krauss Maffei KM 200 CX 1400 MC5 was manufactured in 2008. It features a clamping force of 200 tons, expandable to 300 tons, and a screw diameter of 60 mm. The machine includes a hydraulic ejector, side air valve, robot interface, and a 4-zone mold temperature control system. If you are looking to get high-quality injection molding capabilities, consider the Krauss Maffei KM 200 CX 1400 MC5 machine we have for sale. Contact us for more information. Additional equipment • Hydraulic ejector • Side air valve • Robot interface • 4-zone mold temperature control system Machine Benefits Technical Machine Benefits • Tie bar spacing: 560 x 560 mm Kodjyaizvepfx Ab Iowt Extra Information Machine still under power

Year of construction: 2006, condition: ready for operation (used), This Arburg Allrounder 1200T 800-150 was manufactured in 2006. A vertical injection moulding machine, it offers robust functionality for specialized plastic processing tasks. Consider the opportunity to buy this Arburg Allrounder 1200T 800-150 vertical injection moulding machine. Contact us for more information. Machine Benefits Technical Machine Benefits Kedpfxsyaizpe Ab Iswt • Clamping force: 800 kn • Distance of the tie bars: 1200 mm / screw diameter: 25 mm / max part weight (g, ps): 45 / core pull: 1 • Configuration: vertical

Year of construction: 2003, condition: ready for operation (used), screw diameter: 45 mm, This Arburg Allrounder 630S 2500-675 was manufactured in 2003. It is a hydraulic injection moulding machine featuring a screw diameter of 45mm. Consider the opportunity to buy this Arburg Allrounder 630S 2500-675 hydraulic injection moulding machine. Contact us for more information. Kwjdpfxoyaizie Ab Ijt

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 9171h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Kwodsyab I Uspfx Ab Iet

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 13361h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Kodpfx Abeyab Nfj Iewt

Year of construction: 2016, condition: ready for operation (used), This HAITIAN JU9000II/6800 PLUS was manufactured in 2016. It features a clamping force of 9000 kN and an injection unit with a capacity of 2362 cm³. Operating on a 400 V / 50 Hz power supply, it consumes 199 kW and handles a rated current of 354 A. Weighing 39,000 kg, consider the opportunity to buy this HAITIAN JU9000II/6800 PLUS hydraulic injection moulding machine. Contact us for more information about this machine. • Clamping force: 9000 kN • Injection unit – screw: 2362 cm³ / 80° • Power supply: 400 V / 50 Hz • Power consumption: 199 kW • Rated current: 354 A Kwsdpfx Abeyab Afe Ist • Short-circuit withstand current (In): 25 kA • Machine weight: 39000 kg

Year of construction: 2017, condition: ready for operation (used), overall weight: 56,000 kg, This HAITIAN JU12000II/8400 was manufactured in 2017. It features a screw diameter of 110 mm and operates with a power of 135 kW. The machine runs on AC 400 V, 50 Hz, and can handle a nominal current of 279 A. Weighing 56,000 kg, it's robust for demanding tasks. Consider the opportunity to buy this HAITIAN JU12000II/8400 hydraulic injection moulding machine. Contact us for more information. • Power: 135 kW • Voltage: AC 400 V, 3P / N / PE, 50 Hz • Nominal Current: 279 A • Short-circuit Resistance: 25 kA • Screw Diameter: Ø 110 mm Kodpfsyabwcex Ab Iowt

Year of construction: 2014, operating hours: 39,176 h, condition: ready for operation (used), total height: 4,000 mm, product length (max.): 8,700 mm, This FERROMATIK K-TEC 200 2F was manufactured in 2014. A robust hydraulic injection moulding machine, it features a screw diameter of 18 mm and a clamping force of 200 KN. Ideal for working with materials like ABS and PC, it operates on 400V and 50Hz, ensuring efficient performance. Dimensions are 8700mm in length, 2300mm in width, and 4000mm in height. Consider the opportunity to buy this FERROMATIK K-TEC 200 2F hydraulic injection moulding machine. Contact us for more information. • Clamping Force 200 KN • Screw Diameter: 18 mm • Previous Material Use: ABS, PC Kwsdpfx Abjyabtds Ist • Turning System (HxV): 750 x 750 mm • Power Rating: 192 KW • Voltage: 400V, 50Hz Dimensions Machine Depth 2300 mm

Year of construction: 2016, condition: ready for operation (used), This HAITIAN JU9000II/6800 PLUS was manufactured in 2016. It is a hydraulic injection moulding machine featuring a power consumption of 126 kW and a rated current of 207 A. It operates on AC 400 V, 3-phase / N / PE, 50 Hz. Consider the opportunity to buy this HAITIAN JU9000II/6800 PLUS hydraulic injection moulding machine. Contact us for more information. • Voltage: AC 400 V, 3-phase / N / PE, 50 Hz • Power consumption: 126 kW • Rated current: 207 A Kwjdpfoyabq Nex Ab Ijt • Short-circuit withstand capacity: 25 kA

Year of construction: 2004, condition: ready for operation (used), controller manufacturer: ENGEL, controller model: n/a, overall weight: 10,500 kg, This Engel Elast 1500/250V was manufactured in 2004. It's a vertical injection moulding machine designed for precision and efficiency in plastic processing. Consider the opportunity to buy this Engel Elast 1500/250V vertical injection moulding machine. Contact us for more information. Machine Benefits Technical Machine Benefits • 3 machines available - note that one of the available machines has a defective control unit. • Rated voltage: 3 x 400v • Frequency: 50 hz Kwsdpfxox U U Ixo Ab Ijt • Connected load: 64kw • Rated current: 107a • Control voltage: 230 v Extra Information Machine still under power

Year of construction: 2020, condition: ready for operation (used), overall weight: 28,400 kg, This Arburg Allrounder 920H 5000-4600 was manufactured in 2020. A robust plastic processing machine featuring a clamping force of 5000 kN and an injection unit of 4600. It has a significant opening stroke of 900 mm and mold platens size of 1280 x 1280 mm. Consider the opportunity to buy this Arburg Allrounder 920H 5000-4600 plastic processing machine. Contact us for more information about this machine. Additional equipment • The robot + auto line are not included. These PIOVAN accessories are included: Piovan Hot Air Dryer G35 / Piovan Suction Unit PF30 / 3x Piovan Temp Unit THW118-F (+1x brand new unused temperature unit) Machine Benefits Technical Machine Benefits • Pump hours in operation: 1769 hours, hours in automatic cycle: 695 hours • Clamping force: 5000 kn / injection unit: 4600 • Opening stroke: 900 mm / distance between bars: 920 x 920 mm / mould height min-max: 400-1050 mm • Size of mold platens: 1280 x 1280 mm / ejector stroke: 250 mm / ejector force: 86 kn Kedex U Tqrepfx Ab Iswt Extra Information The machine has been used very little

Year of construction: 2016, condition: ready for operation (used), This MAPLAN MFT 750/160 edition S was manufactured in 2016. It is a vertical injection moulding machine, ideal for precision plastic processing. Contact us for more information. Machine Benefits Kjdpfx Aex U Tihob Ijwt Technical Machine Benefits • Connected load: 84 kw • Nominal voltage: 3 x 400 v • Control voltage: 24 v • Safety distance: 310 mm • Overrun time: 128 ms • Overtravel: 62. 3 mm • Max platform height: 750 mm • Platform dimensions: 1850 x 1300 mm • The systems are fully functional and were used in 2/3-shift operation between 2017 and 2022. • The spray cylinders were resealed and the insulation panels replaced in 2023. Extra Information Machine still under power

Year of construction: 2004, condition: ready for operation (used), This Arburg 720 S 3200 -1300 was manufactured in 2004. A hydraulic injection moulding machine featuring an operating voltage of 400 V, control voltage of 24 V, and a total connected load of approximately 39.0 kW. Consider the opportunity to buy this Arburg 720 S 3200 -1300 hydraulic injection moulding machine. Contact us for more information. Kwodpfxsx U D A Ee Ab Ist

Year of construction: 2016, operating hours: 48,336 h, condition: ready for operation (used), This Engel victory 1800/300 was manufactured in 2016. A hydraulic injection moulding machine with a 300-ton machine power, it features a screw diameter of 60 mm and supports up to 16 hot runners. Equipped with four hydraulic core pullers and a Viper 12 robot, it offers enhanced automation capabilities. Contact us for more information about this machine. Kjdpfx Aex U Dp Eob Ijwt • Machine power (tons): 300 • Between columns w x h (mm): 750 x 1000 • Min. mold height (mm): 400 • Max. mold height (mm): 900 • Max. distance between plates: 1300 • Diameter of center ring / height: 160/15 • Diameter of thread on ejector coupling: M24 • Diameter of screw (mm): 60 • Hot runners: 16 • Hydraulic core pullers: 4 • Robot: Viper 12

Year of construction: 2018, condition: ready for operation (used), This HAITIAN JU12000III was manufactured in 2018. A robust hydraulic injection moulding machine, it features a power supply of AC 400 V, 3-phase + N + PE, 50 Hz, and an input power of 148 kW. Rated current stands at 243 A. CE compliant, consider the opportunity to buy this HAITIAN JU12000III hydraulic injection moulding machine. Contact us for more information. • Power Supply: AC 400 V, 3-phase + N + PE, 50 Hz • Input Power: 148 kW Kwsdpfxox U Dl Ho Ab Ijt • Rated Current: 243 A • Short-circuit Withstand Rating: 25 kA • Certification: CE compliant