Nord-Lackierkabine24 GmbH

Condition: good (used), functionality: fully functional, 2x Powder supply units (Manufacturer: Wagner) 2x Powder control units & spray guns (Manufacturer: Wagner) 1x Curing oven 1x Complete overhead rail system General information about the powder coating plant: 2x Powder supply units (Manufacturer: Wagner): without powder recovery, resulting in short changeover times Curing oven: Oven dimensions (internal): Length: 6500 mm Width: 2400 mm Height: 1400 mm Maximum component weight: 750 kg Fedsxhcx Aspfx Afpjgh Retrofitted to forced-air gas burner (approx. 85kW/h) Rail system: The system was completely renewed in 2013 Load per suspension point: 200 kg Load per suspension traverse: 400 kg Corresponding technical drawing available

Condition: like new (used), Year of construction: 2024, functionality: fully functional, total height: 5,000 mm, total length: 15,000 mm, total width: 5,000 mm, Equipment: cabin, Picture is indicative, not actual. Detailed plans and 3D views can be provided upon request! Fgsdpfjxg Igcjx Afpoh High-performance spray booth installation (15m x 5m x 5m) with integrated paint storage and preparation room. Designed and manufactured by SIMA (Belgium), this turnkey system offers a reliable and energy-efficient solution for industrial surface treatment. Key Features: - Full spray booth with diagonal airflow, advanced ventilation and filtration (EU4, EU5, Andrea, Paintstop). - Direct gas burner (300 kW) with 100% efficiency and frequency-controlled ventilation (31,500 m³/h). - ECO-mode with automatic recirculation: up to 85% energy and gas savings during standby. - Touchscreen HMI (Schneider) with programmable spraying, drying, flash-off, and cooling modes. - LED lighting system (58 fixtures, 1200 lux), optional integrated emergency lighting. - Rigid insulated Jupiter panel construction, fire-resistant, with service and emergency exits. - Separate paint storage/mixing room (3.5m x 2.5m x 2.5m) with ATEX ventilation, fire dampers, and integrated control. - Complete with CE certification, technical dossier, and 2-year warranty (1 shift). Scope of Supply: - Delivery, installation, and commissioning included. - Training, technical documentation, and maintenance options available. - Condition: New – never used. - New price was: €130,000 (excl. VAT). - Price can be discussed = needs to leave! - Was not installed due to sale of business before delivery of cabin. Ideal for industrial applications, OEM production lines, or large workshops requiring a reliable, energy-efficient, and compliant spray booth with integrated paint kitchen.

Condition: good (used), Year of construction: 2023, functionality: fully functional, The machine is in good condition and has been professionally and carefully maintained. Graco airless unit, type Merkur ES with spray gun Fsdjxgn Uaepfx Afpsgh Including various nozzles Further information available by email or phone. Private sale, therefore no return, no warranty and no guarantee. Sale is made with exclusion of any liability. No shipping

Condition: used, Year of construction: 1999, functionality: fully functional, UV varnish drying installation Fjdexb Dppjpfx Afpjgh UV dryer on UV line

Condition: used, Year of construction: 1999, functionality: fully functional, Roller coater; Inline UV coating machine Fsdpjxb Dnfofx Afpegh

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 90-014, Dust removal machine UV line brushing machine Unladen weight 1,000 kg Fgedpfx Ajxb Dl Rjfpjh

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? Fgsdpfx Afjxa H Ewjpoh We are happy to assist you.

Condition: new, Powder Coating Systems For years, powder coating has been continuously evolving as an alternative to wet painting, and it has recently gained increasing importance due to its lower environmental impact—specifically the absence of solvents and paint sludge. Powder recovery further boosts the efficiency of these systems to a particularly high level. For users, powder coating offers the advantage of creating an extremely durable and corrosion-resistant surface that is significantly more impact-resistant than what traditional painting can achieve. Additionally, post-processing tasks such as grinding or drilling the powder-coated parts present no problems, as the coating will not chip off. Pony Luxury Coating powder coating systems provide you with tangible advantages: they are efficient, environmentally friendly, and—as always—unsurpassed in flexibility. We achieve this through a range of system types. Fgodpfexa Hzxex Afpjh Manual Powder Coating Systems Manual coating systems are the ideal solution for complex and demanding workpieces. Thanks to skilled operators, these systems offer continuous adaptation to changing conditions and varying product sizes. Flexibility is paramount—with the added benefit of an attractive entry price into the world of powder coating. Large-Scale Powder Spray Booths No matter how large or challenging your workpieces, our systems are larger! In the commercial vehicle and utility sector, where components are exposed to significant stress, powder coating has established itself as the ideal solution. To accommodate ever-larger components, we offer our large-scale powder booth, which supports unlimited manual coating, and, when combined with a conveyor system, handles any workpiece size with ease. Automatic Powder Coating Systems If your operation requires high throughput and rapid processing, an automated powder system is the way forward. Coupled with a conveyor, light barriers allow precise detection and, consequently, exact powder dosage to ensure maximum efficiency. The system can also be equipped with lifting stations and robots to handle even the most complex components. Powder Curing Ovens & Flash-Off Dryers These provide the perfect finishing touch to powder coating: the curing oven. Our ovens feature the highest insulation class, ensuring consistent, high efficiency. Detailed temperature control also enables use as a flash-off dryer to dry substrates after pre-treatment. Temperatures up to 250 degrees Celsius are possible, which allows usage as a tempering oven, for instance with hot-dip galvanized materials. Of course, typical use as a powder curing oven is straightforward. Optimal air distribution and a visualized control panel prevent over-baking, and even allow multiple color shades to be cured in a single process. Do you have questions or suggestions? We are happy to assist you!

Condition: new, Equipment: cabin, Stationary small parts spray booth Dixi █████ Achieve perfect and uniform coating of small parts. The extraction system ensures optimal results even in the smallest spaces. Optionally equipped with a turntable or a wheel holder, as well as a compact yet powerful extraction unit, it is perfectly suited for processing small workpieces and wheels. The side panels effectively limit the distribution of overspray, allowing work to be carried out in confined spaces without contaminating surrounding areas. Integrated lighting is also available as an option. Additionally, thanks to its low weight and minimal connections, the booth can be relocated to a new site in no time, ensuring your flexibility at all times. The system comes fully pre-assembled and ready for immediate use. Your Benefits Thanks to its compact design, flexible dimensions, and versatile accessories, this booth offers a broad range of applications. The sophisticated modular system requires minimal space and is therefore suitable for use in virtually any premises. Different filter media and stages enable highly efficient operation, while filter changes can be performed in just a few minutes. Fgsdpfx Aexa Hx Rofpoh Application and Safety Processing of both water-based and solvent-based coating materials is enabled by the use of ATEX-certified explosion-proof motors. It can also optionally be used for spraying adhesives. The large filter surface ensures uniform extraction throughout the process.

Condition: used, Year of construction: 2024, Please find attached information about our powder coating and wet painting line, which we established last year in the Izmir Free Trade Zone. The facility is designed for bicycle painting. The dimensions are 680 × 680 × 2100 mm (L × W × H). Plant components: 1. 5-stage pretreatment washer, 2-stage plate heat exchanger, and heated stainless steel sheet 316 1.1. Water drying tunnel with reversing function, 135 m 1.2. Control panel 1.3. Medium-duty overhead conveyor 2.1. Label curing oven and conveyor belt, 75 m 2.2. Labeling area with air-conditioned roof and conveyor belt 3.1. Powder coating system, 135 m 3.2. Powder curing oven with 2 reversing functions 3.3. Powder spray booths not included; two Wagner powder spray booths Fgsdpfxsxa Exps Afpeh 3.4. Medium-duty overhead conveyor 4.1. Wet painting system 4.2. Powder coating oven 4.3. Wet spray oven 4.4. Exhaust ventilation 4.5. Four wet paint spray booths 4.6. Two air-conditioned mixing rooms 4.7. 290 m conveyor belt 5.1. Label application system, 90 m 5.2. Air-conditioned area in the roof The facility cost €2,800,000.00 as new. This is a fully automatic powder and wet paint line. Individual components can also be purchased. If you are interested, please do not hesitate to contact us.

Condition: good (used), Airless sprayer, painting device, spray pack, paint sprayer, paint spray system, paint pump, electrostatic sprayer, airless complete system, pneumatic piston pumps, airless high-pressure pump, air motor, AIR MOTOR -Manufacturer: Wagner, Airless sprayer type: 33-70 with transport trolley and spray gun -Material flow: max. 12.6 l/min -Air inlet pressure: max. 8 bar, operating pressure max. 264 bar Fodpfxjw U T Ats Afpjgh -Individual components: see photos -Dimensions: 830/680/H1140 mm -Weight: 50 kg

Condition: not inspected (used), Paint booth, manufacturer: Walther Pilot Fgodow U R Dzspfx Afpjh

Condition: new, Year of construction: 2017, functionality: fully functional, total height: 2,485 mm, total length: 4,000 mm, total width: 2,400 mm, working width: 500 mm, Equipment: cabin, lighting, Sale of a double cabin for powder coating, packaged, new, unused. The item is a “Double ID Booth 4000” from the German manufacturer Wagner GmbH. All parameters are shown in the attached drawing. Fsdpfx Afow Exx Nopogh

Condition: new, Year of construction: 2025, total height: 982 mm, total length: 4,000 mm, total width: 1,100 mm, volume flow: 18,000 m³/h, warranty duration: 12 months, Extraction wall with 18,000 m3/h Max. power consumption 5 kW/h Electric motor 4 kW Fgedpfjwz Ic Njx Afpoh Air unit 18,000 m3/h Nicotra ADH 400 The full description can be found in the attachment to this listing.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, Pony 7000 Sales Price List Paint booth 7 x 4 x 3 meters • Reinforced partial grating 5 mm • Height 3 meters (Sprinter height) • 2 x 7.5 kW motors (belt drive) • ATEX ceiling lighting • 24,000 m³/h • Incl. 2 drive-on ramps for above-floor version • Above-floor and in-ground version at same base price Base price: €28,900 Base price for 2.76 meter height version minus €1,000 (passenger car height) Base price for 3.5 meter height version plus €1,000 (motorhome height) Door-in-door system: €1,800 Double glazed doors: €1,800 11 kW motor incl. larger fans and enhanced control cabinet with direct drive: €7,770 15 kW motor incl. larger fans and enhanced control cabinet with direct drive: €8,610 Side lighting: €2,870 Ceiling lighting EX protection according to ATEX: €1,470 Full light-duty grating: €1,785 Full heavy-duty grating, reinforced 5 mm: €2,990 Direct drive with PLC control for 11 kW motors (incl. soft start): €15,120 Direct drive with PLC control for 15 kW motors (incl. soft start): €17,640 Soft start for 7.5 kW motor (belt drive only): €1,239 PLC control for 7.5 kW 24k m³/h motors with 3-stage energy saving program: €5,670 PLC control for 11 kW 30k m³/h motors with 3-stage energy saving program: €7,770 PLC control for 15 kW 30k m³/h motors with 3-stage energy saving program: €8,610 PLC control for 2 x 5.5 kW 36k m³/h (belt drive) motors with 3-stage energy saving program: €5,565 Pneumatic drive-on ramp: €4,900 Fodpfxswzmcbo Afpogh Grating modification for lift: €1,785 Pass-through system with double gates (without door-in-door): €3,250 Tri Axis ramp: €7,980 Second service door (position freely selectable): €1,150 Info: 11 kW motor set at 1,200 rpm (inverter) (1,000 rpm motor) achieves 36,000 m³/h

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V. Fgjdewzl Hxspfx Afpoh

Condition: good (used), Year of construction: 2014, FEIGE, type FE37-E-18, year of manufacture: 2014, base dimensions 6,000 x 6,000 mm, height approx. 6,000 mm, useful volume 98 m³, heating capacity 252 kW, with paint mixing station, control and operating unit, with supply and exhaust air system. Fedpfx Afewyxcdspjgh

Condition: good (used), Year of construction: 2014, FEIGE, type FE37-E-18, serial no.: 1127758, year of manufacture: 2014, base dimensions 6,000 x 6,000 mm, height approx. 6,000 mm, usable volume 98 m³, heating capacity 252 kW, with paint mixing station, control and command unit, with supply and exhaust air system. Fsdpfx Aswyxb Hsfpogh

Condition: excellent (used), Year of construction: 2006, GIARDINA Painting Line Year of manufacture: 2006 Fjdpfx Aowycggsfpsgh Machine very little used, in perfect condition Working width: 1400 mm The line consists of the following devices: - GIARDINA Dualtech 401 paint automaton - MOS 4 PLUS microwave dryers – 3 units.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, total height: 920 mm, total width: 1,300 mm, overall weight: 900 kg, working width: 1,200 mm, feed rate X-axis: 80 m/min, compressed air connection: 6 bar, working height: 920 mm, year of last overhaul: 2021, Equipment: documentation/manual, emergency stop, For sale is a used Hymmen TLX M roller coating machine (year of manufacture 1993) designed for the precise application of lacquers and oils. The machine shows signs of use appropriate to its age; however, some parts have been newly repainted and maintained, so it is in good technical condition. Fedpfx Aewxb Slofpegh A robust and versatile machine for precise coatings. Please feel free to contact us if you are interested or have any questions!

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: Inv.119140, total length: 26,000 mm, total width: 9,000 mm, Equipment: cabin, lighting, 1 used painting line, featuring circulating conveyor belt, manual spray booth for sample coating, automatic spray booth equipped with robot and workpiece rotary holder, reverse osmosis system for DI water, paint preparation, and exhaust air treatment system. The system operates two shifts in serial production. Manual loading and unloading onto a conveyor belt; otherwise fully automatic. 18.7.25: Update: Dismantling is to be carried out from September 2025 on-site in Lohr by the buyer. The buyer is responsible for all costs related to dismantling, packaging, collection, and transport to their own facility (FCA terms). The area must be vacated no later than mid-January 2026 for installation of new production machines. For further details, see attached handout/flyer. Due to the significant effort required for dismantling, early and thorough planning with the disassembly company is essential, as is prompt contact or a visit to the site. Additional information is provided in the attached handout. --- 1 used painting line, with circulating conveyor, manual paint booth for samples, automatic paint booth with robot and workpiece rotary fixture, reverse osmosis system for DI-water, paint preparation, exhaust air treatment. Info in English, French, Spanish available upon request. --- Please indicate your offer price. Sale only within the EU, Switzerland, Turkey, and United Kingdom. Dismantling to be performed by the buyer. --- Fodewqg Iijpfx Afpegh No packaging; all warranty rights are excluded. Should you wish to dismantle the system yourselves, please indicate this in your offer. We do not guarantee the accuracy of technical data, completeness of accessories and tools, or compliance with all safety and environmental regulations as per accident prevention guidelines.

Condition: like new (used), functionality: fully functional, machine/vehicle number: MD1001, total height: 150 mm, total length: 45 mm, total width: 52 mm, overall weight: 50 kg, PROMIX 2KS MIXER, 1 COLOR + 1 CATALYST + 1 AIR + SOLVENT SHIPPING AVAILABLE 🚚 -Brand: Graco -Reference: MD1001 -UPC Code: 633955370647 -General Industry: Paints and Glues -Application: Two-component paints, solvent and water, glues, varnishes, lacquers. Fodpfx Aswp Slksfpsgh -Mixing close to the guns for greater control -Compatible with solvent- and water-based epoxies and polyurethanes -Mixing ratio up to 30:1 -Pressure: 275.6 bar (4000 psi) -Pre-owned, fully inspected -Warranty: 1 year -OPTIONAL: COLOR AND CATALYST CHANGE WITH CONTROL (PRICE ON REQUEST)

Condition: used, inner dimension height: 1,950 mm, inner dimension width: 1,850 mm, No. 3230 Complete paint shop Wagner Rafi / Wildcat / Finish 104 B Ex Used Complete spray room equipment Spray wall Rafi mobile 1850 x 1950 mm width x height 2 drying trolleys 1 spray gun Wagner Wildcat / IceBreaker motor / pump type 18 - 40 1 Wagner Finish 104 B Ex sprayer Sale by customer order, ex location near 69124 Heidelberg, without dismantling, without transport and assembly Dismantling, loading and transportation by us optionally possible Errors in description and price reserved To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Fodpfx Afown Tvuspjgh Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total height: 3,000 mm, total length: 8,880 mm, total width: 4,000 mm, volume flow: 38,000 m³/h, type of input current: three-phase, workpiece weight (max.): 80 kg, compressed air connection: 8 bar, suction capacity: 38,000 m³/h, load capacity: 80 kg, heating capacity: 340 kW (462.27 HP), Equipment: cabin, lighting, For sale is a brand new wet painting line. Internal dimensions of the cabin 8880x4000x3000mm. Overhead conveyor of products with a length of 41m. Pitch of swivel hinges 400mm. Load capacity 80kg/m. Production speed maximum 4m/min. Large door to the cabin 2000x2500mm (possibility of painting large parts). Ventilation exhaust unit 38,000m3/min. Paint preparation room including membrane pump 01D140. Application electrostatic gun. Gas heating 340kW. Fedowmm U Uepfx Afpjgh

Condition: new, Year of construction: 2025, Mobile Paint Container Take your painting process to the next level with mobile convenience. Mobile paint booths in a container design for painting and coating various objects. They are specifically designed for mobility, making them easy to transport and set up on different construction sites. The booth is typically equipped with a ventilation system to ensure air quality, lighting, and a filtration system to prevent paint overspray. The ventilation system ensures that fumes and particles released during painting are contained within the booth, preventing any danger to the surrounding area. Mobile paint booths are a practical and flexible solution for companies that need a portable and effective painting system that can be transported from one construction site to another. Design and Features Overview Our mobile 20-foot Sapi paint containers consist of a robust steel frame with welded wall and ceiling panels. We can add special equipment such as cranes or lifting devices inside. The floor is made of teardrop plate. Both door panels contain ventilation grilles fitted with fine-pored filter mats. One panel is designed as an emergency exit for safety reasons and features a viewing window. It's also worth mentioning that these aren't simply converted shipping containers! We manufacture all of our containers from scratch. We use only the most robust materials that meet our requirements and have also been safety-tested and proven. Conventional shipping containers would not meet the required safety standards. Paint extraction system in the mobile painting container The paint mist extraction panel for paint mist separation is located in front of the rear wall and is equipped with multi-layer filter mats. The extraction panel consists of a galvanized housing, folded with guide plates, including various suspension and fastening elements for the filter assembly. The powerful, explosion-proof extraction fan with drive motor is installed on a console in the rear wall area on the outside of the container. Fedpfx Aswf Dmxefpsgh Next-generation mobile paint booths: Meeting EU requirements and advancing coating solutions The new generation of mobile paint booths must meet the highest EU requirements. The inclusion of new coating systems such as hydro-based paints, polyurethane resins, epoxy zinc dust, or epoxy iron mica paints places high demands on existing paint booths. Therefore, we have developed a new and unique mobile paint booth for the next generation of coating solutions. A key criterion is the transport of workpieces for painting and further processing steps. Whether it is dry paint mist separation or wet washing, air humidification or air drying, condensation drying using low-temperature processes or warm air drying, or whether workpiece pretreatment is carried out using high-pressure washing with water in a recirculating system, compressed air blasting, or wheel blasting technology.