Used Ravensburg Kdbz 55 for sale (11)

Condition: excellent (used), Year of construction: 1995, Functionality: fully functional, RAVENSBURG TOWER 3 METRE BETWEEN POINTS Nelsvazk Sshccqrjcr TYPE KD 55 Traditional Lathe Ø 600 x 3000 Broken Ø 900 Complete machines with lots of tooling

Condition: ready for operation (used), Year of construction: 2000, capacity 4500X2000MM Ncjlhju Spf Eeccqror glasses

Year of construction: 1959, Condition: ready for operation (used), Turning diameter: 1500mm, turning length: 2000mm, a Siemens panel control was installed in 2018. An on-site inspection is possible. Ncslhccqowa Tkijrer

Condition: ready for operation (used), 3 guideway flat bed lathe - heavy duty 2 steadies are included Distance between centers: 6100 mm Swing over bed: 1500 mm Swing over cross-slide: 1320 mm Swing in gap: 2000 mm Diametre of main spindle bore: 102 mm Ncolhcov Sfr Rocqror Number of speeds: 4 > 180 rpm

Condition: used, Technical details: faceplate diameter: 1500 mm center height: über Fundament: 1250 mm revolution per minute: 2,1 ... 96 / 12 step U/min feed min/max: 0,3 ... 2,5 / 18 step mm/min. spindle bore: Ø 82 mm tailstock adjustment - manual: quer: 55 mm tailstock quill stroke: 400 mm tailstock taper MT: 6 weight of the machine ca.: 15 t dimensions L x W x H: Spindelkasten: ca. 2,0 x 1,6 x 2,1 m dimensions L x W x H: Support: ca. 6,0 x 2,1 x 1,6 m Stand support with bed slide: -bed slide travel 4,300mm motorized -cross slide 1500mm -Cross slide 600mm -Top slide 250mm -Tool holder with clamping claw Bed guide dimensions LxW: 6000 x 1500mm 4 base plates each 6000x2050x200mm Ncjlhccqeu Ix Sgersr *

Condition: not inspected (used), Faceplate diameter: 2650 mm Max. turning diameter: 3200 mm Max. turning length: 10,000 mm Max. workpiece weight: 50 tons Max. turning length in one setup: approx. 6000 mm Faceplate speed: 40 rpm Machine comes with a boring bar (approx. 6 meters) holder Lunneten Njlhccevnrxceqrjcr Control: NUM 1060

Condition: used, Year of construction: 1990, diameter 250 mm tool adaptor 250 length 700 mm Nolhccsu Sbkmeqrecr total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: used, Year of construction: 1972, turning diameter Ø 2000 mm turning length 3500 mm Ncolhcsunucmocqrjr swing diameter over bed slide 1500 mm total power requirement 28 kW weight of the machine ca. 22 t dimensions of the machine ca. 10 x 3 x 3 m No. 4944 RAVENSBURG K 66 - 3500 ( 4500 ) Working range: Sph.1050x Spw.3500 (4350) Drive: 28 kW Faceplate Ø 1500 mm Tailstock Bed extension 700 mm Roller support Ø 150 - 1400 mm steady rest Lathe Ø 2000 / 1500 Spindle bore 90 mm Speed range 0.6 - 250 min-1 Space requirement approx. 10 x 3 x 3 m Weight approx. 22 tons 20 % discount for ex-works delivery

Year of construction: 1963, Condition: ready for operation (used), Center height: 930mm, center width: 3000mm, turning diameter over faceplate/bed: 2200mm/1700mm, max. workpiece weight in the chuck holder/in the centers: 3000kg/8000kg, spindle bore: 80mm, faceplate speed: 180rpm, dimensions X/Y/Z: approx. 4000mm/1500mm/1800mm, weight: approx. 24000kg. Documentation available. On-site inspection is possible. Ncolhccqotva Dvsrsr

Condition: good (used), Year of construction: 2001, operating hours: 0 h, Functionality: fully functional, machine/vehicle number: 0, Wolf chip silo made of prefabricated steel-concrete parts, diameter 6 m, 16.5 m high, volume approx. 350 m³, incl. concrete roof, 1 lower intermediate ceiling, 1 vertical ladder, 1 steel door 120/160 cm, 3 poking platforms, 1 extinguishing system - dry pipe - Nslhccqjttrcxorjcr

Condition: good (used), Year of construction: 1988, Functionality: fully functional, Description: Heavy duty high precision horizontal lathe with hydraulic clamping system Rohm, slide with two working positions, Sauter 4 side tool holder, circular turning unit, CNC 6 axes, tailstock, chip conveyor, suitable for both, high volume material removal and high precission turning. Machine modified with 2000 mm face clamping plate and increased in size. A one-owner machine, total time 88.000 hrs, used only for high precision manufacturing of printing cylinders. The machine comes with the device COF which allows the workpiece to stay in place while the COF works around it. Year of production: 1988 Made in: Germany Turning diameter over bed: 2500 mm Turning diameter over telescopic covers 2200 mm Ibkanx9 Turning diameter over slide: 1400 mm Turning length: 6000 mm Clamping 3 chucks table 2000 mm Spindle bore: 200 mm Attachment for circular turning Weight of the workpiece 4.500-40.000 kg Revolver head: 4 pcs. Spindle r.p.m. range: 4 - 400 r.p.m. Main motor Siemens 95,5 kW Max torque 40000 Nm Overall power demand: 125 kW Ncjlhcovfdbwscqrer Control: CNC SIEMENS 8T, 6 controlled movements Machine weight: 43 000 kg Space required: 13.000x4.000