Used Sahinler Hpm 30 for sale (71)

Condition: new, Year of construction: 2024, Sheet thickness steel (max.): 15 mm, Sheet thickness (max.): 15 mm, Roller (top) diameter: 300 mm, Roller diameter: 300 mm, Overall weight: 9,900 kg, Total length: 5,150 mm, Total height: 1,550 mm, Total width: 1,500 mm, Roller (bottom) diameter: 300 mm, Bending length: 3,100 mm, Side roll diameter: 280 mm, Warranty duration: 12 months, Power: 11 kW (14.96 HP), Operating speed: 5,000 mm/s, Equipment: Emergency Stop, BEND LENGTH : 3100MM CENTER BALL DIAMETER : 300MM SIDE BALL DIAMETER : 280MM Brhjk3A8Cs ENGINE POWER : 11 KW WEIGHT : 9900KG FRONT UNCURVED THICKNESS : 15MM PRE-CURVED THICKNESS : 13MM LENGTH : 5150MM WIDTH : 1500MM HEIGHT : 1550MM STANDARD 1- Side balls move orbitally up and down with hydraulic piston Protected against overload 2- All cannons are driven by hydromotor and planetary gearbox 3- Hydraulic opening head allows easy removal of the bent part 4- Very easy operation with movable control panel 5- Two digital indicators make it easy to read the position of the lower balls 6- Welded steel construction body 7- SAE 1050 (CK 45) induction hardened, hot rolled steel shafts 8- Bearing conical crimping system Hydraulic balancing system for parallel movement of shafts 9- Extended spindle ends for mounting profile - pipe crimping balls

Condition: new, - Shaft diameter 30 mm - 2 Speed Bx28G3Wq9B - Turns right and left - Horizontal/vertical use - Foot-operated - Emergency stop - Documentations - 400V

Year of construction: 2021, Condition: like new (used), Machine/vehicle number: 158541, in the following version: Bf2Ppyxn8Oz - GEKA tool holders at the top, GEKA No. 8/31, 8/40, 11, 12 - GEKA tool holders below GEKA No. 5, 8, 11, 12 - Large projection of 625 mm - Inching operation for precise tool and Workpiece positioning - Possibility of limiting the stroke for faster Workflow for series work - Large work table - Lighting - Set of operating tools - Foot control - Technical Documentation - CE version - Weight: approx. 3,270 kg Technical data: - Punching force: 85 tons - Max. punching performance: Ø 33 in 20 mm or Ø 57 x 12 mm - Max. stroke length: 80 mm - Number of strokes at 20 mm stroke length: 21 - Throat: 625 mm - Working height: 950 mm - Motor power: 7.5 kW Dimensions: - Length: 1,850 mm - Depth: 950mm - Height: 1,920 mm - Weight approx.: 3,270 kg

Condition: new, die cushion stroke: 200 Bdf3Dmfw0I

Condition: new, Year of construction: 2024, Sheet thickness steel (max.): 30 mm, Sheet thickness (max.): 30 mm, Roller (top) diameter: 400 mm, Roller diameter: 400 mm, Overall weight: 20,000 kg, Total length: 5,850 mm, Total height: 2,250 mm, Total width: 2,350 mm, Roller (bottom) diameter: 400 mm, Bending length: 3,100 mm, Side roll diameter: 300 mm, Warranty duration: 12 months, Power: 38.5 kW (52.35 HP), Equipment: Emergency Stop, BEND LENGTH : 3100MM CENTER BALL DIAMETER : 400MM SIDE BALL DIAMETER : 300MM ENGINE POWER : 38.5 KW WEIGHT : 20000KG FRONT UNCURVED THICKNESS : 30MM PRE-CURVED THICKNESS : 25MM LENGTH : 5950MM WIDTH : 2250MM HEIGHT : 2350MM Shn0Zeou72 STANDARD FEATURES Well suited for crimping medium and heavy platinated sheet metal or stainless materials Well suited for crimping round, elliptical, oval shapes and materials of various diameters 1- Bottom cannon and side cannons move hydraulically up and down linearly with pistons connected to the body Protected against overload 2- Top cannon and side cannons are driven by hydromotor and planetary reducer (3 cannons are motor driven) 3- Three digital indicators make it easy to read the position of the balls 4- Hydraulic opening head and automatic lifting spindle make it easy to remove the bent part 5- Very easy operation with movable control panel 6- Welded steel construction body 7- SAE 1050 (CK 50) induction hardened, forged or rolled steel shafts 8- Conical crimping system 9- Central lubrication system Hydraulic balancing system for parallel movement of shafts (Ø280 -320 -350 -380 -380 -400 -460) Electronic balancing system (Ø500-550-550-580-620 -680) 10- Double speed working system

Condition: new, die cushion press capacity: ohne 2Rchkm

Condition: new, Year of construction: 2024, Sheet thickness steel (max.): 22 mm, Sheet thickness (max.): 22 mm, Roller diameter: 300 mm, Power: 11 kW (14.96 HP), Equipment: Emergency Stop, BEND LENGTH : 2050MM CENTER BALL DIAMETER : 300MM SIDE BALL DIAMETER : 280MM ENGINE POWER : 11 KW WEIGHT : 8100KG FRONT UNCURVED THICKNESS : 22MM PRE-CURVED THICKNESS : 20MM LENGTH : 4100MM WIDTH : 1500MM HEIGHT : 1550MM STANDARD 1- Side balls move orbitally up and down with hydraulic piston Dpdbur Protected against overload 2- All cannons are driven by hydromotor and planetary reducer 3- Hydraulic opening head allows easy removal of the bent part 4- Very easy operation with movable control panel 5- Two digital indicators make it easy to read the position of the lower balls 6- Welded steel construction body 7- SAE 1050 (CK 45) induction hardened, hot rolled steel shafts 8- Bearing conical crimping system Hydraulic balancing system for parallel movement of shafts 9- Extended spindle ends for mounting profile - pipe crimping balls

Condition: new, sheet length: 2050sheet thickness: 3total power requirements: 2,2weight approx.: 1.500messurements (LxWxH): 3.200 x 750 x 1.000 Bdf28Aqrrw

Condition: new, Year of construction: 2024, Sheet thickness steel (max.): 18 mm, Sheet thickness (max.): 18 mm, Roller (top) diameter: 300 mm, Roller diameter: 300 mm, Overall weight: 9,100 kg, Total length: 4,100 mm, Total height: 1,500 mm, Total width: 1,550 mm, Roller (bottom) diameter: 300 mm, Bending length: 2,550 mm, Side roll diameter: 280 mm, Warranty duration: 12 months, Power: 11 kW (14.96 HP), Equipment: Emergency Stop, BEND LENGTH : 2550MM CENTER BALL DIAMETER : 300MM SIDE BALL DIAMETER : 280MM ENGINE POWER : 11 KW WEIGHT : 9100KG FRONT UNCURVED THICKNESS : 18MM PRE-CURVED THICKNESS : 16MM LENGTH : 4600MM WIDTH : 1500MM HEIGHT : 1550MM STANDARD 1- Side balls move orbitally up and down with hydraulic piston Protected against overload 2- All cannons are driven by hydromotor and planetary gearbox 3- Hydraulic opening head allows easy removal of the bent part Bj3Rjk7Kj8 4- Very easy operation with movable control panel 5- Two digital indicators make it easy to read the position of the lower balls 6- Welded steel construction body 7- SAE 1050 (CK 45) induction hardened, hot rolled steel shafts 8- Bearing conical crimping system Hydraulic balancing system for parallel movement of shafts 9- Extended spindle ends for mounting profile - pipe crimping balls

Condition: good (used), Year of construction: 2012, Sheet thickness steel (max.): 25 mm, Sheet thickness aluminum (max.): 32 mm, Roller (top) diameter: 320 mm, Bending length: 2,070 mm, Manufacturer: SAHINLER Type: SHV HS 2070 x 320 Year of construction: 2012 Specifications: Metric Metric US Standard Roller width 2070 mm Sheet thickness with 3 x top roll Ø 20 mm Sheet thickness with 5 x top roll Ø 25 mm Sheet thickness for bending 18 mm Top roll Ø 320 mm Bottom roll Ø 320 mm Side roller Ø 260 mm Number of rollers 4 Bending speed 0 - 5 Adjustment of bottom roller 0 - 100 mm/min. Side roller adjustment 0 - 100 mm/min. Number of driven rollers 2 Urpwqvpced Power output 15 kW Dimensions (estimate) length 4700 mm width 2000 mm height 2200 mm weight 8700 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Year of construction: 2001, Condition: used, Double column hydraulic press SAHINLER type AT 1520 x 100 Workshop press with table and ram plate, test press Machine. No. 21026 Year of construction 2001 Pressure capacity 100 ton. Frame width 1570 mm Frame clearance 240 mm at the side Table surface 1520 x 500 mm Plunger surface 1520 x 200 mm Table top centering hole Ø 100 mm (through hole) Centering hole for ram plate Ø 59 x 110 mm (blind hole) Plunger stroke max. 300 mm Installation height max. 650 mm Table height above floor 770 mm Cmjuatwciy Feed speed 9 mm/s Working speed 5.3 mm/s Return speed 11 mm/s Hydraulic operating pressure 263 bar Piston rod diameter 160 mm Motor power 7.5 kW Mains connection 400 Volt, 50 Hz - 2-hand operation opposite - Manual press force adjustment via handwheel - Manually adjustable limit switch cams for stroke limitation - ram plate additionally guided by 2 lateral guide rods, Ø 60 mm - Table and ram plate with 18 mm T-slots, slot spacing 250-250-270-250-250 mm - Electrical cabinet on the side of the machine stand, electrics retrofitted by the previous owner. - Operating instructions and electrical diagram from original condition available Space requirement L x W x H 2630 x 1400 x 2600 mm Weight 3.7 tons. good condition

Condition: new, neu Dpr2Vj ca. 10 Wochen ab Auftrags Türkei 22500 € 461.25 € 80 mm 245 mm 3 4 kW 6 m/min 100x20 mm / 2000 mm; 80x2 125x25 mm / 600 mm; 60x5 45x45 mm / 500 mm; 15x15 Ø 50 mm / 500 mm; Ø 15 mm Ø 100x2,5 mm / 1.200 mm; 80x25x3 mm / 800 mm; 25x1 70x70x3 mm / 1.300 mm; 25 80x80x8 mm / 800 mm; 30x3 70x70x7 mm / 700 mm; 30x3 UPN 140 / 1600 mm; UPN 12 UPN 140 / 1.600 mm; UPN 1 IPN 120 / 600 mm; IPN 80 1450 mm 1000 mm 1400 mm 1700 kg 3 motor driven rolls strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rolls positions on seperate control panel lateral rolls adjustable in 3 axes horizontal and vertical operation for- and backward drive machine and equipment according to the CE regulations WE HAVE MORE THAN 210 REFERENCES!

Condition: new, 35 mm 35 mm bar material dia. max. 70 x 2 mm rectangle 60 x 60 x 3 mm flat steel 60 x 10 mm Axis diameter 50 mm diameter - cutter standard 115 mm Dcwr7Ir work speed 9,0 U/min total power requirement 1,5 kW weight of the machine ca. 0,4 t dimensions of the machine ca. 0,66 x 0,9 x 1,35 m Profile bending machine with: - Foot pedal right/left rotation - Hardened special steel shafts - 1 set of standard rollers - 2 rollers are driven

Condition: used, Year of construction: 1994, pressure:100 t throat:280 mm piston stroke:300 mm Dpfcqz table-size:1000 X 600 mm dimension of ram:600 X 400 mm total height over floor:300 mm length in width:1200 mm voltage:380 V weight of the machine ca.:4 t

Condition: like new (used), Year of construction: 2008, Punching force: 85 t, Punching pressure: 85 t, OUR MACHINE IS A 2012 MODEL ALL MAINTENANCE DONE TROUBLE-FREE AND EXCELLENT PERFORMANCE HOLE PUNCH HKM 85 Diameter at maximum thickness Ø Ø 33 x 20 mm Diameter x thickness (xt) Ø 57 x 12 mm Thickness at maximum diameter Ø 110 x 4 mm Work course 80 mm Number of courses x 25 Groove depth 355 mm Working height 1080 mm FULL MATERIAL SHEAR HKM 85 Round / quadrangular Ø 50- 50 mm ANGLE IRON HKM 85 CUTTING SCISSOR Right angle (90°) 150 x 150 x 15 mm Angle bracket (45°) 80 x 8 mm Working height 1200 mm SHEET METAL SHEARS (LLAMA CUTTING) HKM 85 Flat sheet 380 x 20 mm Flat sheet 480 x 15 mm Blade length 482 mm Angle cut 120 x 15 mm Working height 940 mm NOTCHING HKM 85 Material thickness 13 mm Cilybshlrg Width 52 mm Depth 100 mm Working height 940 mm SPECIAL MOLDS HKM 85 U-I profile knives (UPN - IPN cut 160 x 74 mm T profile blades 100 x 11 mm Special notch set 100 x 100 x 13 mm V crimping 250 x 20 mm Maximum llama crimping V crimping 500x4 mm Sheet metal bending maximum Punch at notch 125 mm Jaw depth Punch Ø 38 x10 mm in the notch section Sheet metal bending maximum TECHNICAL SPECIFICATIONS HKM 85 Engine power 7. 5 kW Weight 2315 kg Machine dimensions (LxWxH) 1920x950x2040 mm Pressure 85 tons 1-2 separate hydraulic pistons and 2 separate foot controls for two people to work at the same time 2-Adjustable piston stroke distance for faster work 3-Centralized lubrication system 4-Backrest with electric switch Work lamp 5-5 separate workstations on the same body: 5.1 - Ø22 mm punch and matrix and standard drilling tools 5.2 - Full round and full square material cutting knife set 5.3 - Angle cutting knife set 5.4 - Blade and sheet metal cutting knives 5.5 - U-notching knife set

Condition: new, Year of construction: 2024, neu 2024 9718 prompt, Zwischenverkauf v Türkei 9500 € 196.65 € 1 50 mm 152 mm 162 mm 3 1.1 kW 4,5 m/min 60x10 mm / 600 mm; 20x10 100x15 mm / 600 mm; 50 x 35x35 mm / 600 mm; 15x15 35 mm / 600 mm; Dm. 20 mm 70x2 mm / 1200 mm; Dm. 25 70x30x3 mm / 1500 mm; 30x 50x50x3 mm / 1600 mm; 20x 50x50x6 mm / 600 mm; 30x3 50x50x6 mm / 900 mm; 30x3 810 mm 950 mm 1500 mm 500 kg 3 mech. driven rolls (brake motor) hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis Dpr2R2 horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!

Condition: new, Year of construction: 2024, Shaft diameter: 60 mm, Overall weight: 1,000 kg, Total length: 1,200 mm, Total width: 850 mm, Total height: 1,200 mm, Warranty duration: 12 months, Power: 3 kW (4.08 HP), Equipment: Emergency Stop, MODEL HPK 65 Isvmd7M Top shaft diameter Ømm 60 Bottom shaft diameter Ømm 50 Roller diameter Ømm 180 Operating speed m/min 5 Engine power kW 3 Length mm 1200 Width mm 850 Height kg 1200 Weight mm 1000 Steel construction welded body Three waltz ball driven Hardened and ground shafts Hardened standard rolls Horizontal and vertical working position Movable control panel 3-way movable side rests Precision bending with brake motor Digital indicators (2 pcs)

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 12900 € 264.45 € 60 mm 215 mm 215 mm 3 1.5 kW 4 m/min 80x20 mm / 1200 mm; 40x10 120x25 mm / 600 mm; 50 x 50x50 mm / 800 mm; 20x20 Cy0Gxzdswa Ø 50 mm / 800 mm; Ø 20 mm Ø 100x2 mm / 1600 mm; Ø 6 80x40x3 mm / 1400 mm; 40x 70x3 mm / 1600 mm; 40x2 m 70x70x7 mm / 1000 mm; 40x 70x70x7 mm / 1200 mm; 40x 1000 mm 1400 mm 1650 mm 950 kg 3 mech. driven rolls (brake motor) hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 260 REFERENCES!

Condition: new, Year of construction: 2024, Shaft diameter: 80 mm, Overall weight: 1,700 kg, Total length: 1,400 mm, Roller diameter: 80 mm, Total width: 1,000 mm, Total height: 1,700 mm, Power: 4 kW (5.44 HP), Equipment: Emergency Stop, Top shaft diameter Ømm 80 Bottom shaft diameter Ømm 70 Diameter of roll ball Ømm 245 Operating speed m/min 6 Engine power kW 4 Length mm 1450 Width mm 1000 Height kg 1400 Weight mm 1700 Steel construction welded body Three rolls motor driven Hardened and ground shafts Hardened standard rolls Horizontal and vertical working position R932N7Bicl Movable control panel 3-way movable mechanical side rests Precision bending with brake motor Digital indicators (2 pcs)

Condition: new, Year of construction: 2024, Overall weight: 3,650 kg, Total length: 2,000 mm, Roller diameter: 100 mm, Total width: 1,450 mm, Total height: 1,700 mm, Power: 7.5 kW (10.20 HP), Equipment: Emergency Stop, Diameter of roll shafts Ømm 100 Roll ball diameters Ømm 315 Operating speed m/min 7 Engine power kW 7. 5 Length mm 2000 Width mm 1450 Height mm 1700 E2Ov0Ly Weight kg 3650 Steel construction welded body 3-ball drive with single planetary gearbox, hydromotor and gear system Horizontal and vertical working position Movable control panel separate from the body Hardened standard rolls Hardened and ground shafts made of special high-strength material Digital indicators (2 pcs) 3-way movable mechanical manual side rests

Condition: new, Year of construction: 2024, Warranty duration: 12 months, HOLE PUNCH HKM 115 Diameter at maximum thickness Ø Ø 34 x 26 mm Diameter x thickness (xt) Ø 55 x 16 mm Thickness at maximum diameter Ø 110 x 5 mm Xlhlgdohk Work course 80 mm Number of courses x 25 Groove depth 355 mm Working height 1110 mm FULL MATERIAL SHEAR HKM 115 Round / quadrangular Ø 55- 50 mm ANGLE IRON HKM 115 CUTTING SCISSOR Upright angle (90°) 150 x 150 x 16 mm Angle bracket (45°) 80 x 10 mm Working height 1215 mm SHEET METAL SHEARS (BLADE CUTTING) HKM 115 Flat sheet 380 x 25 mm Flat sheet 600 x 15 mm Blade length 610 mm Angle cut 120 x 15 mm Working height 935 mm NOTCHING HKM 115 Material thickness 13 mm Width 60 mm Depth 100 mm Working height 935 mm SPECIAL MOLDS HKM 115 U-I profile knives (UPN - IPN cut 200 x 90 mm T profile blades 120 x 13 mm Special notch set 100 x 100 x 13 mm V crimping 250 x 22 mm Maximum llama crimping V curling 700 x 3 mm Sheet metal bending maximum Punch at notch 125 mm Jaw depth Punch Ø 38 x12 mm in the notch section Sheet metal bending maximum TECHNICAL SPECIFICATIONS HKM 115 Engine power 11 kW Weight 2920 kg Machine dimensions (LxWxH) 2040x950x2180 mm Pressure 115 tons 1-2 separate hydraulic pistons and 2 separate foot controls for two people to work at the same time 2-Adjustable piston stroke distance for faster work 3-Centralized lubrication system 4-Backrest with electric switch 5-Working lamp 6-5 separate workstations on the same body: 6.1 - Ø26 mm punch and matrix and standard drilling tools 6.2 - Full round and full square material cutting knife set 6.3 - Angle cutting knife set 6.4 - Blade and sheet metal cutting knives 6.5 - U-notching knife set

Condition: new, Year of construction: 2024, Punching force: 85 t, Total height: 1,920 mm, Total width: 950 mm, Total length: 2,040 mm, Overall weight: 2,315 kg, Hole diameter: 38 mm, Material thickness: 10 mm, Warranty duration: 12 months, Power: 7.5 kW (10.20 HP), HOLE PUNCH HKM 85 Diameter at maximum thickness Ø Ø 33 x 20 mm Diameter x thickness (xt) Ø 57 x 12 mm Thickness at maximum diameter Ø 110 x 4 mm Work course 80 mm Number of courses x 25 Groove depth 355 mm Working height 1080 mm R9Vojwz FULL MATERIAL SHEAR HKM 85 Round / quadrangular Ø 50- 50 mm ANGLE IRON HKM 85 CUTTING SCISSOR Right angle (90°) 150 x 150 x 15 mm Angle bracket (45°) 80 x 8 mm Working height 1200 mm SHEET METAL SHEARS (LLAMA CUTTING) HKM 85 Flat sheet 380 x 20 mm Flat sheet 480 x 15 mm Blade length 482 mm Angle cut 120 x 15 mm Working height 940 mm NOTCHING HKM 85 Material thickness 13 mm Width 52 mm Depth 100 mm Working height 940 mm SPECIAL MOLDS HKM 85 U-I profile knives (UPN - IPN cut 160 x 74 mm T profile blades 100 x 11 mm Special notch set 100 x 100 x 13 mm V crimping 250 x 20 mm Maximum llama crimping V crimping 500x4 mm Sheet metal bending maximum Punch at notch 125 mm Jaw depth Punch Ø 38 x10 mm in the notch section Sheet metal bending maximum TECHNICAL SPECIFICATIONS HKM 85 Engine power 7. 5 kW Weight 2315 kg Machine dimensions (LxWxH) 1920x950x2040 mm Pressure 85 tons 1-2 separate hydraulic pistons and 2 separate foot controls for two people to work at the same time 2-Adjustable piston stroke distance for faster work 3-Centralized lubrication system 4-Backrest with electric switch Work lamp 5-5 separate workstations on the same body: 5.1 - Ø22 mm punch and matrix and standard drilling tools 5.2 - Full round and full square material cutting knife set 5.3 - Angle cutting knife set 5.4 - Blade and sheet metal cutting knives 5.5 - U-notching knife set

Condition: new, Year of construction: 2024, Punching force: 55 t, Total height: 1,880 mm, Total width: 950 mm, Total length: 1,700 mm, Overall weight: 1,600 kg, Equipment: Emergency Stop, Type Plate Available, HOLE PUNCH HKM 55 Diameter Ø Ø 20 x 20 mm at maximum thickness Diameter x thickness (xt) Ø 40 x 10 mm Thickness at maximum diameter Ø 100 x 3 mm Work course 60 mm Number of courses x 25 Groove depth 255 mm Working height 1030 mm FULL MATERIAL SHEAR HKM 55 Round / quadrangular Ø 40- 40 mm ANGLE IRON HKM 55 CUTTING SCISSOR Upright angle (90°) 120 x 120 x 12 mm Angle bracket (45°) 70 x 10 mm Working height 1130 mm SHEET METAL SHEARS (BLADE CUTTING) HKM 55 Flat sheet 200 x 20 mm Flat sheet 300 x 15 mm Blade length 317 mm Angle cut 80 x 15 mm Working height 900 mm NOTCHING HKM 55 Material thickness 10 mm Width 45 mm Depth 90 mm Working height 900 mm SPECIAL MOLDS HKM 55 U-I profile knives (UPN - IPN cut 120 x 58 mm T profile blades 80 x 9 mm Special notch set 100 x 100 x 10 mm V crimping 250 x 12 mm Maximum llama crimping V crimping 500x3 mm Sheet metal bending maximum Punch at notch 125 mm Jaw depth Punch Ø 38 x8 mm in the notch section Sheet metal bending maximum TECHNICAL SPECIFICATIONS HKM 55 Engine power 5. 5 kW Weight 1520 kg Machine dimensions (LxWxH) 1500x950x1880 mm Pressure 55 tons 1- 2 separate hydraulic pistons and 2 separate foot controls for two people to work at the same time 2- Adjustable piston stroke distance for faster work 3- Central lubrication system 4- Backrest with electric switch 5- Work lamp 6- 5 separate workstations on the same body: 6.1 - Ø22 mm punch and matrix and standard drilling tools 6.2 - Full round and full square material cutting knife set Dper0X 6.3 - Angle cutting knife set 6.4 - Blade and sheet metal cutting knives 6.5 - U-notching knife set

Condition: new, Year of construction: 2024, Sheet thickness steel (max.): 30 mm, Sheet thickness (max.): 30 mm, Roller (top) diameter: 380 mm, Roller diameter: 380 mm, Overall weight: 17,300 kg, Total length: 5,400 mm, Total height: 2,350 mm, Total width: 2,250 mm, Roller (bottom) diameter: 380 mm, Working length: 2,550 mm, Side roll diameter: 300 mm, Warranty duration: 12 months, Power: 31.5 kW (42.83 HP), Equipment: Emergency Stop, BEND LENGTH : 2550MM CENTER BALL DIAMETER : 380MM SIDE BALL DIAMETER : 300MM ENGINE POWER : 31.5 KW WEIGHT : 17300KG FRONT UNCURVED THICKNESS : 30MM PRE-CURVED THICKNESS : 25MM LENGTH : 5400MM WIDTH : 2250MM HEIGHT : 2350MM STANDARD FEATURES Brhincllsi Well suited for crimping medium and heavy platinated sheet metal or stainless materials Well suited for crimping round, elliptical, oval shapes and materials of various diameters 1- Bottom cannon and side cannons move hydraulically up and down linearly with pistons connected to the body Protected against overload 2- Top cannon and side cannons are driven by hydromotor and planetary reducer (3 cannons are motor driven) 3- Three digital indicators make it easy to read the position of the balls 4- Hydraulic opening head and automatic lifting spindle make it easy to remove the bent part 5- Very easy operation with movable control panel 6- Welded steel construction body 7- SAE 1050 (CK 50) induction hardened, forged or rolled steel shafts 8- Conical crimping system 9- Central lubrication system Hydraulic balancing system for parallel movement of shafts (Ø280 -320 -350 -380 -380 -400 -460) Electronic balancing system (Ø500-550-550-580-620 -680) 10- Double speed working system

Condition: new, Year of construction: 2024, Bending radius: 150 mm, Total length: 750 mm, Total height: 1,050 mm, Total width: 850 mm, Overall weight: 330 kg, Pipe diameter: 60 mm, Sheet thickness steel (max.): 4 mm, Warranty duration: 12 months, Power: 2.2 kW (2.99 HP), Standard Hardware Self-memorizing NC Control display ensures professional and easy operation of the machine Pipe bending up to Ø 60mm x 4 mm The holder bracket supports the pipe when fixing it to the machine Blank holes for mounting special attachments Steel construction welded body Thermal - Power & Reset lamps Emergency stop button Dpeah7 The machine has 500 internal program memory The minimum bending radius is 3 times the diameter (Ø) of the pipe (depending on the wall thickness of the pipe and the material) Ø 33.7 mm Standard 1 Set Pipe mold included User manual Special Equipment Pipe, Profile or Filled material ball molds in desired dimensions MODEL SPB 60 Minimum Diameter mm 80 Maximum Diameter mm 320 Operating Speed m/sec. 3 Engine Power kW 2 Weight kg 250 Dimensions (L x W x H) 750 x 850 x 1050 Curling Capacity SPB 60 Thick Wall Pipes mm 60×4 Black Steel Pipe mm 48×4 Aluminum Pipe mm 60×8 Round solid tube (black steel) mm 40 Square tube (black steel) mm 40x40x4