Hall construction

Graf Leichtbauhalle

Condition: ready for operation (used), Year of construction: 1990, functionality: limited functionality, total width: 16,000 mm, total length: 91,000 mm, total height: 4,500 mm, The halls are constructed from galvanized steel sheet. The vertical supports (Figure 2) are also made of double-layer galvanized sheet and are not concreted in. A strip foundation made of wood/metal was built and secured to the ground with ground anchors, onto which the hall framework was placed and screwed. (20 mm nuts) During disassembly, unscrew the sheet metal cladding; the longitudinal beams are only clipped in. If you release the lateral, diagonal braces, you can fold the individual frames together. If the loading area is short, you can separate the frames in the middle. We have indicated the functionality as limited. This is not entirely accurate, but it is intended to emphasize that there are also minor collision damages where the sheet metal is dented. This concerns hall 2B – 92m x 16m = 1,460 square meters. We will be closing the site on December 31, 2026, which is why we cannot offer any guarantee or warranty. Therefore, we are selling everything as DIY material or spare parts. Until December 31, we can assist with loading using a forklift. The hall must be dismantled by the buyer!!! Four new, electric sectional doors were installed in the hall four months ago, for which we will charge an additional 4,000.00 € (gross) each! Fpedps Ai Rmgjfx Acisp Inspections can be arranged on weekdays during normal office hours, subject to prior appointment.

Condition: ready for operation (used), Year of construction: 1990, functionality: limited functionality, The halls are constructed from galvanized sheet steel. The vertical supports (Image 2) are also made of double-layered galvanized sheet and are not embedded in concrete. A strip foundation made of wood/metal was built and secured to the ground with ground anchors, on which the hall framework was placed and screwed together (using 20mm nuts). During disassembly: unscrew the sheet metal cladding; the longitudinal supports are only snapped into place. If you detach the lateral, diagonal struts, you can fold the individual frames together. If the loading area is short, you can separate the frames in the middle. We have indicated the functionality as “limited.” While this is not entirely accurate, it is intended to highlight that there are also instances of damage, such as dents in the sheet metal. This concerns hall 2B, which is 41m x 16m = 656 sqm. We will be closing the site on December 31, 2026, which is why we cannot offer any guarantee or warranty. Therefore, we are selling everything as DIY materials or spare parts. Until December 31, we can assist with loading using a forklift. The hall must be disassembled by the buyer!!! Fjdpfxj Ai Rfce Acispp Inspections can be arranged on weekdays during normal business hours, subject to prior appointment.

Condition: ready for operation (used), Year of construction: 1990, functionality: limited functionality, The halls are constructed from galvanized sheet steel. The vertical supports (Image 2) are also made of double-thickness galvanized sheet and are not concreted into the ground. A strip foundation made of wood/metal was built and secured to the ground with ground anchors, onto which the hall frame was placed and screwed. (20mm nuts) During disassembly: Unscrew the sheet metal cladding; the longitudinal beams are only clipped in. If you release the lateral, angled struts, you can fold the individual frames together. If the loading area is short, you can separate the frames in the middle. We have indicated the functionality as "limited." While this is not entirely accurate, it is intended to illustrate that there are also minor damages, such as dents in the sheet metal. This refers to Hall 1A, which measures 19m x 21m = 464 square meters. Fodpfx Acj Ai N Nreijpp We will be closing the site on December 31, 2026, which is why we cannot offer any guarantee or warranty. Therefore, we are selling everything as DIY materials or spare parts. Until December 31, we can assist with loading using a forklift. The hall must be disassembled by the buyer!!! Viewings can be arranged on weekdays during regular business hours, subject to prior appointment.