Crosscut and miter saw

GRAULE ZS 200 N

Condition: new, Year of construction: 2022, New machine Year of manufacture 2022 Motor 400 V / 5.0 kW speed 2800 rpm cutting length 420 mm Cutting width 420 mm at 90 295 mm at 45° Cutting height 200 mm at 90° 140 mm at 45 Crw8Nehe0E Saw can be tilted on one side up to approx. 25° to acute angles and tilted flat to the left up to 30°. Saw blade-Ø 520 mm x 50 mm suction nozzle-Ø 100 mm Weight 250kg With the following equipment options: - HM circular saw blade 520x4,0/2,8 x 50 60 WZ for wood - Machine can be tilted on both sides from the front via hand crank Availability: short term/2022 Location: Solingen

Condition: good (used), Year of construction: 1996, machine/vehicle number: 1996-3-07, Offer 25034 Cutting and mitering - slitting - circular sawing machine Technical data: - Saw blade dimensions 520 x 3.5 x 40 mm - Horizontal miter adjustment 45° - 90° - 20 ° - Vertical miter adjustment 60° - 90° - 45 ° - Cutting range - at 90° L 450 x H 200 mm - at 45° L 295 x H 200 mm - at 45° inclined H 140 mm - Working height 900 mm - Saw blade speed 3500 rpm - Drive 400 V / 5 kW Drfl7L - Space requirement approx. W 900 x H 1600 x D 1600 mm - Weight approx. 250 kg - with: - Pull brake - Saw blade - Discharge roller conveyor with manual stop 6000 mm - original machine stand

Condition: new, Year of construction: 2025, crosscut and miter saw type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake u. Automat. Star delta motor control cutting width at 90deg: 420 mm cutting width at 45deg: swivelled: 295 mm Cju0V9Cbdd Cutting height at 90deg: 200 mm Cutting height at 45deg tilted: 140 mm Saw can be tilted on one side up to approx. 25 degrees to acute angles and tilted flat to the left up to 30 degrees Machine stitched: approx. 250 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: like new (used), Year of construction: 2024, Functionality: fully functional, saw blade diameter: 520 mm, cutting height (max.): 200 mm, Motor 5 kW / 400 V Motor with brake and automatic star-delta circuit Saw blade holder 50 mm Saw blade diameter 520 mm Saw blade speed 2,800 rpm Cutting width at 90° 420 mm Cutting width at 45° tilted 295 mm Cutting height at 90° 200 mm Cutting height at 45° inclined 140 mm Drehgl Saw can be tilted to one side up to approx. 25° to an acute angle and tilted flat to the left up to 30° Machine weight approx. 250 kg Equipment: HM circular saw blade 520x4.0/2.8x50 mm 60 WZ, neg. for wood Machine can be tilted to both sides from the front using a hand crank Hydraulic feed brake as reversing brake Laser device, laser beam with approx. 300 mm line length Pneumatic material clamping on both sides from above consisting of 2 vertical clamping cylinders adjustable, with roller valve Extraction system 400 V / 1.5 KW, 1900 m³/h, max. negative pressure 1700 Pa, Connection diameter 100 and 120 mm, with linen filter bag, plastic chip bag 110 ltr. and 2.5 m spiral hose (not permitted in commercial areas for wood dust due to the wood dust regulations) Automatic switch-on 400 V type ALV 10 Input and output each with a 230 V and 400 V socket Length stop type ST 60 RLH-ST 60, 8.0 m measuring length, left-hand side Length stop + roller conveyor, heavy-duty version Stop slide adjustable from the workstation using a handwheel, electronic-digital measurement display, stop slide pneumatically clampable, stop flap folds back, with steel rollers 60 mm Ø, roller spacing 200 mm, roller width 400 mm, with 6 support feet and connector, overall length 8.7 m Digital electronic display device type FIAMA EP6 for 230 V mains operation with electrical on/off switch and socket. Powerful dark red LED display. Higher accuracy than the battery-powered crystal display

Condition: new, 400 Volt Drehstrom-Bremsmotor 5,0 kWSägeblattdurchmesser 520 mm,Sägeblattaufnahme 50 mm,Schnitthöhe 200 mmSägeblatt auf 45° geneigt: Schnitthöhe 140 mm,Schnittlänge 420 mm,mit Maschinenständer und Handkurbel hintenzur Neigungseinstellung Bkfqeqqqog

Condition: new, Year of construction: 2025, Functionality: fully functional, Technical data: Cutting height 200 mm Cutting height at 45° inclination 140 mm Can be swiveled to the left up to 67 Can be swiveled to the right up to 45 5 KW 1Hydraulic feed brake Cutting length 420 mm at 90° position Cutting length 45° tilted - 295 mm Tiltable to the left 60 °, tiltable to the right 30 ° Paapupis The tilt is adjusted from the front using a hand crank. 1 saw blade for wood, diameter 520 mm 1 heavy-duty cross-cut roller conveyor, length 6,000 mm, mounting side left. The fence is adjusted from the front using a hand wheel. The length can be read off digitally to the nearest millimeter. The stop is locked pneumatically. 1 digital display in 230 volt version 1 heavy-duty feed roller conveyor, attachment side right, length 4,000 mm Machine length 11,700 mm Completely mobile Machine packed on planks Pictures show a customer's machine.

Condition: new, Year of construction: 2024, machine/vehicle number: diverse, The professional for cutting to length, miter and bevel cuts The ZS 200 N is ideally suited for cutting to length, mitre and bevel cuts. Materials such as wood, PVC and aluminum profiles can be cut cleanly and precisely. The saw unit runs on a hardened guide arm and can be tilted horizontally on both sides for miter cuts. The N stands for tilt and means that the saw unit can also be tilted vertically to the side, making it easy to carry out rip cuts. Fact check ZS 200 N Crosscut and mitre circular saw with a maximum cutting height of 200 mm Sturdy cast iron construction precise ball bushing guide of the tool carriage on hardened and ground steel shafts manual saw feed fast miter adjustment up to 65° horizontal and up to 60° vertical Adjustable fixed stops Lower saw blade guard Can be connected to extraction system Machine can be tilted on both sides from the front Hydraulic feed brake Technical details: Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°-90°-25° Vertical mitre range 60°-90°-30° 93Uvm0Q Saw blade Ø 520 mm Weight 310 kg Scope of delivery: ZS 200 N cross-cut and shifter saw Machine stand Machine can be tilted from the front on both sides Hydraulic feed brake HM Z 60 neg. circular saw blade Operating tool and hand crank

Condition: new, Year of construction: 2024, Cutting height at 90°: 200 mm Cutting length: 410 mm Horizontal mitre range: 45° - 90° - 25° Vertical mitre range: 60° - 90° -30° Roller conveyor / support table: no Saw blade diameter: 520 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Suction connection: 100mm Machine length: Machine width: Weight: 300kg Rbox7

Condition: new, Year of construction: 2025, Cut-to-length and mitre saw type: ZS 200 N - 5 KW motor with machine stand, Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automat. Star delta motor control Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: swiveled: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees inclined: 140 mm Saw can be swiveled on one side up to approx. 25 degrees to an acute angle and tilted flat to the left up to 30 degrees Carbide circular saw blade 520x4.0/2.8 x 50 mm 60 WZ neg. for wood RLH-ST60 6.0 mtr. measuring length, mounting side: left Cross-cut fence / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, Ct9Thzbqo9 electronic-digital dimension display, pneumatic clamping of stop slider, stop flap folds backwards, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 mtr. Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Powerful dark red LED display. Higher accuracy than the battery-powered crystal display RO-ST60 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm Diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connection piece Location: From stock 54634 Bitburg - immediately available - Picture: similar. Machine is still in original packaging

Condition: new, saw blade diameter 520 x Ø 50 mm cutting diameter 200 mm cutting length 420 mm Cutting height at 45° 140 mm dimensions of saw-blade 520x3,6/3,0x50 mm turning speeds 2800 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 310 kg. range L-W-H 1400 x 900 x 1650 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60°/45°), with fixed stops - Shift cut on both sides (60°/45°), with fixed stops - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Furnishing : - 3.0 kW motor for ALU cuttings - Saw blade can be tilted via handwheel and worm gear (shift cut) - Saw blade diameter 520 mm Bohvaogg9W - Saw blade mounting hole 50 mm - Saw blade speed 2,800 rpm - 400 Volt / 3 kW (S6/40%) motor with brake and automatic. Star-delta motor circuit - Machine weight approx. 250 kg Cutting data : - Cutting length at 90° = 420 mm - Cutting height at 90° = 200 mm - Cutting length at 45° = 295 mm - Cutting height at 45° = 140 mm Special accessories included: - HM saw blade 520x3.6/3.0x50 mm - Hydraulic feed brake, continuously adjustable - Pneumatic material clamping from above best. from : 2 vertical clamping cylinders adjustable with lever valve - pneumaschine saw blade spray device - Machine can be tilted from the front on both sides using a hand crank - Machine stand

Year of construction: 2008, Condition: used, Max. saw blade diameter: 520 mm Cutting height: 200 mm at 90°, 140 mm at 45° Dpc2Mr Cutting length: 420 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60°-90°-30°

Condition: new, Year of construction: 2024, Product detail Crosscut and mitre circular saws Type ZS 200NF Crosscut and mitre circular saw with maximum cutting height of 200mm solid cast iron construction precise ball-bearing guide of the tool slide on hardened and ground steel shafts manual saw feed fast mitre adjustment up to 65° horizontal and 60° vertical readjustable fixed stops lower saw blade protection connectable to suction unit machine mounted on mobile machine base with 1,5 mtr. long roller conveyors left and right side left side with scale and stop slide technical data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°- 90°- 25° Mitre range Wry8Xrfqr vertical 60°- 90°- 30° Saw blade Ø 520 mm ( not included in standard ) Suction nozzle 100 mm Weight 490 kg Location: Ex stock 54634 Bitburg - Immediately available - On request we can also offer you the saw blade.

Condition: new, GRAULE ZS 170 N cross-cut and mitre saw - tiltable - Includes: - GRAULE ZS 170 N cross-cut and mitre saw - tiltable - - without machine stand and saw blade - Including: - GRAULE machine stand for type ZS 135 N and ZS 170 N Bsmcxttxaum Includes: - GRAULE type RO feed roller conveyor complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm - new exhibition machine -

Condition: ready for operation (used), Year of construction: 1992, saw blade diameter: 420 mm, Graule ZS 170 N For long cuts of ALU, PVC and Wood Bygaydrwoe Motor: 400 V / 3.0 kW rpm: 3500 U/min Length of cut : 410 mm Cutting width : 410 mm at 90° 290 mm at 45° Depth of cut: 170 mm at 90°115 mm at 45° Miter range horizontal : 45°-90°-25° Miter range vertically : 90°-45° (left-leaning) Sawblade-Ø : 420 mm Weight : 120 Kg Suction plant-Ø : 100 mm Cross-cut and mitre saw with maximum cutting height of 170 mm Stable grey cast iron construction Precise ball bearing guide of the tool slide on hardened and ground steel shafts Manual saw feed Fast mitre adjustment up to 25° horizontal and up to 45° vertical Readjustable fixed stops at 90° and 45° Lower saw blade protection can be connected to extraction system Cooling and lubricating system for cutting ALU. Machine is ready for operation saw blade was sharpened. Shipping in EU 100-150 EUR

Condition: good (used), Cutting height 170mm Tiltable and swiveling Saw blade diameter 420mm Bpvgrenp3Y Incl. roller conveyors/tables

Condition: used, machine/vehicle number: 18656, Schnitthöhe : 85 mm Schnitthöhe bei 45° Neigung : 60 mm Schnittbreite bei 90° : 380 mm Schnittbreite bei 45° : 265 mm Neigbar : einseitig Schwenkbar : zweiseitig Sägblattdurchmesser : 300 mm Sägeblattbohrung : 30/40 mm Motorleistung : 1 kW Bpaoqcucn8

Condition: refurbished (used), Functionality: fully functional, GRAULE CUTTING AND MITER SAW TYPE ZS85N Radial saw for cutting PVC and aluminum profiles Cutting and miter saw with maximum cutting height of 85 mm Mobile base frame with castors. Technical data: Drive motor: brake motor 3.0 kW Blj2Ltx9Eq Speed: 2,800 rpm Cutting length: 420 mm Cutting height: 85 mm Voltage: 230/400 V, 50 Hz, 3.0 kW

Year of construction: 1985, Condition: good (used), machine/vehicle number: xxxxx, Cutting to length - and mitre - rafter cut - circular sawing machine Technical data: - Saw blade dimensions 300 x 3.5 x 40 mm Etcnlsn - Horizontal mitre adjustment 45° - 90° - 20 - Vertical mitre adjustment 60° 90° - 45 - Cutting range - at 90° W 380 x H 85 mm - at 45° W 265 x H 85 mm - at 45° inclined H 65 mm - Saw blade speed 2750 rpm - Drive 220 V - Space requirement approx. W 700 x H 1400 x D 1400 mm - Weight approx. 180 kg - with: - hydr. feed brake - Saw blade

Condition: new, NEW Description: - Crosscut and miter saw with maximum cutting height of 135 mm - Machines can be mitered in 2 levels - Stable gray cast iron construction - Precise ball bushing guide of the tool carriage on hardened and ground steel shafts - Manual saw feed - Fast miter adjustment up to 25° horizontally and up to 45° vertically - Readjustable fixed stops at 90° and 45° - Lower saw blade guard can be connected to the extraction system Scope of delivery: Crosscut and miter saw type ZS 135 N without saw blade Technical data: - Motor: 400 V / 2.2 kW - Speed: 3800 rpm - Cutting length: 430 mm - Cutting width: 430 mm at 90° / 300 mm at 45° - Cutting height: 135 mm at 90° / 92 mm at 45° - Miter range horizontal: 45°-90°-25° Dq77G7 - Miter range vertical: 90°-45° (tilted to the left) - Saw blade diameter: 350 mm - Extractor nozzle diameter: 100 mm - Weight: 100 kg

Year of construction: 1999, Condition: excellent (used), RADIAL ARM SAW Graule ZS 170 N Sawblade-Ø 420 mm shipping EU ~300euro Djjaqh

Condition: new, Year of construction: 2024, Mobile chop station with extremely robust base, ready assembled and ready for use. Included special equipment: - Machine tiltable on both sides from the front - Circular saw blade HM 520x50 Z60 W neg. - Undercarriage mobile, especially stable Data of the machine: - especially due to constant zero point good when using measuring equipment and stop systems (miter and tilt!) - Powerful three-phase motor 5 kW with automatic Star-delta starting - stable guide arm with 4 ball bushings for precise and safe preference - swiveling left 45 ° (miter) - swiveling right 65 ° (miter) - Tilt left 60 °, right 30 ° - Cutting width at 90 ° 420 mm - Cutting width for miter 45 ° 295 mm - Cutting height vertical 200 mm - Cutting height at inclination 45 ° 140 mm - Cutting height at inclination 60 ° 80 mm - for saw blade 520x50 mm Rw3Vkear9 - Suction nozzle 100 mm - Weight with stand 300 kg - CE and GS signs. dust tested - German quality product Data base: Extremely stable frame construction from large dimensioned profiles, powder-coated, sturdy steel carrying rollers with ball bearing high wall thickness galv. galvanized, sustainable Double-stop swivel castors with PU tread, easy to move Roll width 450 mm Conditions about threaded spindles adjustable 1500 mm roller conveyor per side 2750 mm stop length per side Total length 5990 mm Stiff profile heavily ribbed 100x50 mm Anodised aluminum (extendable as option) 1 hinged stop right and left Measuring tape right and left

Condition: excellent (used), saw blade diameter: 420 mm, cutting height (max.): 170 mm, total length: 410 mm, Motor 400 V / 2.0 kW Speed 3500 rpm Cutting length 410 mm (at 90°) Cutting height 170 mm (at 90°) Gme27C9Ec Mitre range horizontal 45°-90°-25° Vertical mitre range 90°-45° (left) Saw blade O 420 mm Suction nozzle 100 mm Weight 120 kg

Condition: new, Description:- Crosscut and miter circular saw with a maximum cutting height of 170 mm- Miter-adjustable machines in 2 levels- Stable gray cast iron construction- Precise ball bushing of the tool slide on hardened andground steel shafts- Manual saw feed- Fast miter adjustment up to 25 ° horizontally and up to 45 ° vertically- Readjustable fixed stops at 90 ° and 45 °- Lower saw blade protection can be connected to the suction systemScope of delivery:1 x Graule crosscut and miter circular saw, type ZS 170 Nincluding additional charge for 3 kW 400 volt motor1 x machine stand for type ZS 135 N and ZS 170 NTechnical specifications:- Motor: 400 V / 3.0 kW- Speed: 3500 rpm- Cutting length: 410 mm- Cutting width: 410 mm at 90 ° / 290 mm at 45 °- Cutting height: 170 mm at 90 ° / 115 mm at 45 ° 2- Horizontal miter range: 45 ° -90 ° -25 °- Vertical miter range: 90 ° -45 ° (inclined to the left)- Saw blade Ø: 420 mm- Suction nozzle Ø: 100 mm- Weight: 120 kg Dq77Ed

Condition: new, Description:- Crosscut and miter circular saw with a maximum cutting height of 170 mm- Miter-adjustable machines in 2 levels- Stable gray cast iron construction- Precise ball bushing of the tool slide on hardened andground steel shafts- Manual saw feed- Fast miter adjustment up to 25 ° horizontally and up to 45 ° vertically- Readjustable fixed stops at 90 ° and 45 °- Lower saw blade protection can be connected to the suction systemScope of delivery:1 x Graule crosscut and miter circular saw, type ZS 170 Nincluding additional charge for 3 kW 400 volt motorTechnical specifications:- Motor: 400 V / 3.0 kW- Speed: 3500 rpm- Cutting length: 410 mm- Cutting width: 410 mm at 90 ° / 290 mm at 45 °- Cutting height: 170 mm at 90 ° / 115 mm at 45 ° 2- Horizontal miter range: 45 ° -90 ° -25 °- Vertical miter range: 90 ° -45 ° (inclined to the left)- Saw blade Ø: 420 mm- Suction nozzle Ø: 100 mm- Weight: 120 kg Bgieadqul8

Condition: used, Year of construction: 1986, incl. 2 saw blades d, good conditionmake Grauletype ZS 85 Nyear of manufacture 1986motor 2.2 kWcutting height approx. 85 mmcutting length approx. 380 mmblade diameter approx. 300 mmsaw blade bore approx. 40 mmswivel right up to 45°swivel left up to 45°tiltablemachine basefeed brakematerial system made of aluminum-steelnew price approx. 5.000,00 € with accessoriessuction connection D 80 mmweight approx. 150 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as inspected,without guarantee and warranty Bggb3Eusfy