Carpentry machine

Graule ZS200 N

Condition: new, Year of construction: 2026, machine/vehicle number: diverse, The professional for cutting to length, miter and bevel cuts The ZS 200 N is ideally suited for cutting to length, mitre and bevel cuts. Materials such as wood, PVC and aluminum profiles can be cut cleanly and precisely. The saw unit runs on a hardened guide arm and can be tilted horizontally on both sides for miter cuts. The N stands for tilt and means that the saw unit can also be tilted vertically to the side, making it easy to carry out rip cuts. Fact check ZS 200 N Crosscut and mitre circular saw with a maximum cutting height of 200 mm Sturdy cast iron construction precise ball bushing guide of the tool carriage on hardened and ground steel shafts manual saw feed fast miter adjustment up to 65° horizontal and up to 60° vertical Adjustable fixed stops Lower saw blade guard Can be connected to extraction system Machine can be tilted on both sides from the front Hydraulic feed brake Technical details: Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°-90°-25° Vertical mitre range 60°-90°-30° Saw blade Ø 520 mm Weight 310 kg Scope of delivery: Hedpfx Ahsh Nu Iujujng ZS 200 N cross-cut and shifter saw Machine stand Machine can be tilted from the front on both sides Hydraulic feed brake HM Z 60 neg. circular saw blade Operating tool and hand crank

Condition: good (used), Maximum diameter of saw 400mm Maximum saw projection 133mm Crosscut capacity 90° 340 x 133mm Crosscut capacity 45° 290 x 133mm Height of work table 813mm Motor power 4.5Kw Speed of spindle 3000 RPM Hnsdperl Sknofx Ahujg Spring return for saw unit DC brake

Condition: new, Year of construction: 2026, crosscut and miter saw type: ZS 200 N - 5 KW motor Hnedpsi Dfidofx Ahueg with machine stand, but without saw blade Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake u. Automat. Star delta motor control cutting width at 90deg: 420 mm cutting width at 45deg: swivelled: 295 mm Cutting height at 90deg: 200 mm Cutting height at 45deg tilted: 140 mm Saw can be tilted on one side up to approx. 25 degrees to acute angles and tilted flat to the left up to 30 degrees Machine stitched: approx. 250 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, functionality: fully functional, Technical Data: Cutting height: 200 mm Cutting height at 45° incline: 140 mm Tiltable to the left up to 67° Hedpfon R A Ewjx Ahusng Tiltable to the right up to 45° 5 kW hydraulic feed brake (optional) Cutting length: 420 mm at 90° position Cutting length at 45° swivel: 295 mm Tilt angle: left 60°, right 30° Tilt adjustment from the front via hand crank. 1 wood saw blade, diameter 520 mm 1 heavy-duty cross-cut roller conveyor, length 6,000 mm, mounted on the left. The stop is adjusted from the front via handwheel. Length is digitally readable to the millimeter. The stop is pneumatically locked. 1 digital readout (230 V version) 1 heavy-duty feed roller conveyor, right side, length 4,000 mm Machine length: 11,700 mm Fully mobile Machine packed on wooden planks Images show a customer’s machine. Available upon request also with 215 mm or 240 mm cutting height.

Year of construction: 2026, condition: new, ProfiStop Lazer is a simple, no frills saw measurement solution for light-duty industrial applications. High speed, high accuracy cutting production cut, after cut, after cut. • Fast and high-accuracy automatic servo motor cut measuring • Simple to use and setup, compatible with most saws / drills • Light duty 10-20 kg recommended material weight • Ideal for aluminium, softwood or light steel • Automated and streamlined jobs management • Label printing and bar-code / QR code jobs input (optional) • Jobbing integration to your ERP system (optional) Hjdpef Dp Idsfx Ahuong Available lengths: 1.5 m, 3 m, 4.5 m, 6 m, 7.5 m, 9 m. Highly suitable for: • Kitchens and wardrobes manufacture • Stairs and banisters manufacture • Furniture manufacture • Windows and doors manufacture • Woodcraft manufacture Can be used with all your existing saws including: • Mitre drop saws • Industrial drop saws • Guarded up-cut saws • Radial arm saws • Drills and presses Model: ProfiStop Lazer Length: 6 m Stroke: 5674 mm Pushing capacity: 10-20 kg Software: Basic Supplied with a roller table or as a linear unit only for installation to your existing tables. The quoted price is excluding the table. QUALITY AUSTRALIAN-MADE MACHINES.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 520 mm, total length: 1,750 mm, total width: 1,030 mm, total height: 1,800 mm, type of input current: three-phase, input voltage: 400 V, saw blade bore: 50 mm, ❇️ Graule ZS 200 N – Crosscut and Mitre Saw | Very Good Condition | Fully Functional | UVV Safety Inspected For sale on behalf of a client is a high-quality Graule ZS 200 N crosscut and mitre saw from a window manufacturing facility. The machine is in very good, well-maintained, and fully functional condition and has been regularly used until recently. Current UVV/safety inspection available (see photos). Viewing and function testing on site can be arranged at any time. ⸻ ❇️ Technical Specifications: • Manufacturer: Graule Maschinenbau GmbH, Aalen • Model: ZS 200 N • Machine type: Crosscut & Mitre Saw (for aluminium, wood, plastic) • Saw blade diameter: 520 mm • Bore: 50 mm • Swivel range: large, finely scaled mitre range • Drive: 400 V Hnedpsx N Hxxofx Ahuog • Application area: Primarily for processing aluminium and profiles • Design: Heavy-duty industrial standard construction ⸻ ❇️ Features & Highlights • Very robust machine stand • Large dual-sided worktable (multiplex coated) • Pneumatic hold-down clamps • Extraction hood / extraction port • Digital measuring/length stop system (display mounted on top) • Precise swivelling mechanism with angle scale • Ideal for aluminium profiles in window manufacturing • Ready for immediate operation • Only original Graule circular saw blades permitted (manufacturer’s note) ⸻ ❇️ Condition • Very good, well-maintained, immediately ready for use • Fully functional • Well-kept appearance • Still in use • UVV safety inspected ⸻ ❇️ Sale & Processing • Invoice with VAT shown is possible • Delivery or transport available upon request and cost coverage • Location: 72229 Rohrdorf • On-site loading by overhead crane possible ⸻ ❇️ Price: Net asking price: €8,990 + VAT ⸻ ❇️ Dimensions: • Approx. D 175 cm x W 103 cm x H 180 cm ⸻ ⚠️ Other accessories for the workshop and metalworking are also available in my other listings. ‼️ Please also take a look at my other items. It’s worth it!

Condition: used, Year of construction: 1996, Cutting height at 90°: 200 mm Cutting length: 410 mm Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Roller conveyor / support table: no Saw blade diameter: 520 mm Speed: 2800 rpm Hjdpoxu Dhxsfx Ahujng Motor power: 5 kW Motor brake: yes Extraction port: 100 mm Hold-down device: yes Machine length: Machine width: Weight: 300 kg

Condition: new, Year of construction: 2026, A700 Fully Automatic Mitre Solid Wood 6 m Fully automatic cutting of large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. For every piece of aluminium you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new aluminium stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic optimiser mode with timber laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: Hsdpfxemdq I De Ahueng • Frame and truss manufacture • Mitre timber structures manufacture • Bulk timber cutting • Furniture manufacture • Planters and boxes manufacture Model: A700 Length: 6 m Material Length: 4680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, saw blade diameter 520 x Ø 50 mm cutting diameter 200 mm cutting length 420 mm Cutting height at 45° 140 mm dimensions of saw-blade 520x3,6/3,0x50 mm Hnodpfxsxaaxds Ahusg turning speeds 2800 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 310 kg. range L-W-H 1400 x 900 x 1650 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60°/45°), with fixed stops - Shift cut on both sides (60°/45°), with fixed stops - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Furnishing : - 3.0 kW motor for ALU cuttings - Saw blade can be tilted via handwheel and worm gear (shift cut) - Saw blade diameter 520 mm - Saw blade mounting hole 50 mm - Saw blade speed 2,800 rpm - 400 Volt / 3 kW (S6/40%) motor with brake and automatic. Star-delta motor circuit - Machine weight approx. 250 kg Cutting data : - Cutting length at 90° = 420 mm - Cutting height at 90° = 200 mm - Cutting length at 45° = 295 mm - Cutting height at 45° = 140 mm Special accessories included: - HM saw blade 520x3.6/3.0x50 mm - Hydraulic feed brake, continuously adjustable - Pneumatic material clamping from above best. from : 2 vertical clamping cylinders adjustable with lever valve - pneumaschine saw blade spray device - Machine can be tilted from the front on both sides using a hand crank - Machine stand

Condition: new, Year of construction: 2025, functionality: fully functional, saw blade diameter: 520 mm, cutting height (max.): 200 mm, feed length X-axis: 420 mm, rotational speed (min.): 2,800 rpm, cutting length (max.): 420 mm, space requirement length: 8,800 mm, space requirement width: 1,200 mm, length stop: 8,800 mm, pressure: 5 bar, power: 5.5 kW (7.48 HP), workpiece height (max.): 200 mm, Equipment: double-sided, Mobile saw base frame; total length approx. 8600 mm for Graule ZS 200 saw; stop roller conveyor on the left side 5200 mm, measuring length from 400 - 5960 mm, with digital LED measurement display, measuring length including extension approx. 8800 mm, Saw base frame with 6 crank supports ensure safe standing when working. With electrical power distribution and 3-way socket 230 V Hnjdjv Hhg Topfx Ahusg Mobile saw base frame Beck ESF 1, saw ZS 200 mounted on base frame

Condition: excellent (used), Year of construction: 1999, Good morning, We offer for sale an automatic radial arm saw from the excellent Italian company OMGA model RN700 To begin with, some useful information about the machine: * blade diameter in the range of 295 - 300 mm. * spindle 30 mm * saw motor 4.0 HP ( 2.9 kW ). * max dimensions of the cut element 80 x 700 mm * pneumatic pressures of the cut element - 2 pcs. * CNC controller for programming the parameters of the saw, including feed speed, width of cut * movement of the saw head on the stepper motor * own sawdust extraction * adjustment of cutting in three planes * very good technical and visual condition * safety guards and mushrooms for the safety of the saw operator. * 1999 year of production * overall dimensions 150 x 95 x 140 cm ( length x width x height ). Hnjdpfsn Nyfyjx Ahusg * meets CE standards

Condition: new, Year of construction: 2026, Cut-to-length and mitre saw type: ZS 200 N - 5 KW motor with machine stand, Machine via handwheel and worm gear (rear) Tiltable Hnodpek H Ic Uefx Ahusg Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automat. Star delta motor control Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: swiveled: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees inclined: 140 mm Saw can be swiveled on one side up to approx. 25 degrees to an acute angle and tilted flat to the left up to 30 degrees Carbide circular saw blade 520x4.0/2.8 x 50 mm 60 WZ neg. for wood RLH-ST60 6.0 mtr. measuring length, mounting side: left Cross-cut fence / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital dimension display, pneumatic clamping of stop slider, stop flap folds backwards, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 mtr. Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Powerful dark red LED display. Higher accuracy than the battery-powered crystal display RO-ST60 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm Diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connection piece Location: From stock 54634 Bitburg - immediately available - Picture: similar. Machine is still in original packaging

Condition: new, Year of construction: 2025, Depth of cut at 90°: 200 mm Depth of cut at 45°: 140 mm Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Miter range horizontal: 45° -90° -25° Miter range vertically: 60° -90° -30° Sawblade diameter: 520 mm rpm: 2800 U/min Hjdsiy Ry Aepfx Ahueng Motor: 5 kW motor brake: yes suction plant diameter: 100 mm weight: 490 kg

Condition: new, Year of construction: 2024, cutting hight at 90°: 200 mm cutting width: 410 mm miter square horizontal: 45° - 90° - 25° miter square vertical: 60° - 90° -30° roller convoyer/ supporting table: no saw blade diameter: 520 mm Hodpfjiuld Sjx Ahuong speed: 2800U/min motor power: 5 kW motor brake: yes suction connection: 100mm machine length: machine width: Gewicht: 300kg