20 x 68 m³ fermentation tank / beer tank

Gross

Condition: excellent (used), Year of construction: 2019, – Feed opening size (width/length): 820 x 1050 mm – Rotor diameter: 300 mm – Rotor length: 820 mm – Total power: 18,5 kW – Power supply: 400 V, 50 Hz Gjdpszkb Uzefx Ahzeud – Rotating knives: 35 x 35 mm – Number of knives: 40 pcs – Siewe Ø: 15 and 25 mm - Output : Screw in the bottum of machine + 3000 mm waste conveyer – HYDRAULIC DRAWER – Pressing drawer height: 320 mm – Outlet diameter: Ø200 mm – Dimensions (L/W/H): 200 / 150 / 175 cm – Weight: ~1600 kg

Condition: used, Complete beer clarification system, comprising the following main components: - Diatomaceous earth cartridge filter (Filtrox, 1979) with a capacity of 27.1 hl and a filter area of 26.62 m². Refurbishment work was carried out by Steinecker in 2002. - Cartridge membrane filter (H&K, 2011) with 24 filter cartridges and a filtration capacity of 200 hl/h - Buffer tank for unfiltered wine (Gross, 1979) with a capacity of 61.5 hl - Buffer tank for filtered wine (Gross, 1979) with a capacity of 10 hl - PVPP dosing vessel (1981) - Diatomaceous earth dosing vessel (1979) Additional title: Complete filtration system with buffer tanks and dosing for filter aids Filtration capacity: 18000 l/h Material: Contact surfaces from stainless steel Features: Cartridge filter; cartridge membrane filter; 2 x buffer tanks; 2 x dosing vessels; various pipes, valves and sensors Gusdpfxszizq Ts Ahzsd

Condition: used, Year of construction: 1991, Yeast management system comprising two harvest yeast tanks (GROSS, 1991), of cylindroconical design, each with two cooling zones. The tanks are fitted with various sensors and fittings. Other components: - two centrifugal pumps with stainless steel casings - aeration system for yeast and wort (Esau & Hueber ‘Turbo Air’) - flow meters and other sensors - pipe panel - various pipework and valves Additional title: coolable, cylindroconical stainless steel tanks with pumps and yeast aeration Volume each: 4500 l Material: stainless steel Position: tanks standing on 3 feet each Guedjzizf Ropfx Ahzsd Base construction: cylindroconical tanks Features: 2 yeast tanks, each with 2 cooling zones (frame+ cone); 2 centrifugal pumps; yeast/wort aeration; sensors; pipe panel; various pipes, valves and sensors

Condition: ready for operation (used), Year of construction: 2007, power: 55 kW (74.78 HP), Fully functional single-shaft wood shredder - currently in operation in our factory. Including electrical control system (PLC), switch cabinet (Rittal/Sarell), anti-vibration foundation and enlarged hopper. Technical data Rotor working length: 1,500 mm Rotor diameter: 485 mm Motor: 55 KW Rotor speed: 100 RPM Gjdpfsra Ex Esx Ahzeud Rotor knives: 76 pieces concave / 35x35 mm 4-fold rotating cutting crowns Screen size: 60 mm (new) Weight: approx. 9,000 kg Further details on request. Errors and omissions excepted.

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Feed opening: 600 x 800 mm Hopper capacity: 0.6 m³ V-rotor Rotor diameter: 252 mm Rotor working width: 600 mm Rotor speed: 60 – 100 rpm Cutting system: 28 knives 40 x 40 mm Screen perforation: 15/20 mm Control: electronic via PLC Control cabinet: fully wired, incl. 5 m cable Motor power: 18.5 kW Connection voltage: 400 V +/- 5% / 50 Hz Extraction nozzle diameter: 160 mm Dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Weight: approx. 1,300 kg Includes: Automatic star-delta starter Automatic shut-off in idle mode Vibration-damping machine feet CE compliant Godpfx Ahsxavtdozeud Availability: short-term Location: Flörsheim

Year of construction: 1995, condition: used, Flotation tank. - Designed for cooling with ammonia (can also be cooled with glycol), 1 x frame cooling. - Stainless steel - Insulated and clad - Stand frame, short - Cleaning air fitting with safety valve Additional title: Refrigerated stainless steel tanks for outdoor installation Capacity: 74480 l Operating pressure: 0,9 bar Width: 12,55 m Height: 3,27 m Material: Stainless steel Position: vertical Base construction: short supporting skirt Gujdpfx Aozgcvljhzed Features: Cooling: 1 x side wall cooling jacket; insulation; dearation and cleaning combination with safety valve; temperature measurement

Condition: new, Sale from stock- New -Briquetting press GP Genius I/40Briquette diameter: 40 mmPressing capacity: material-dependentHopper opening: 900 x 900 mmHopper height: 1025 mmHopper capacity standard: approx. 0.6 m³Motor power: 4.10 kWConnected load: 400 V /- 5% / 50 HzControl cabinet: electronically controlled via PLCHydraulic unit: with approx. 50 l tank for hydraulic oilPaint finish: RAL 7016 5017Overall dimensions: L = 1,600 mm, W = 1,250 mm,H = 1,300 mmWeight: approx. 550 omatic briquette length control, automatic adjustmentof length depending on material density- gear motor with screw conveyor for screw pre-compaction- permanent agitator- connection part for transport tube- chrome-plated tongs- manual control of all cylinders- automatic end position of all cylinders- safety switch for oil temperature- automatic switch-off in the event of bridging in the container andinterruption of the pressing cycle due to foreign bodies- CE-compliant- automatic ON/OFF rotary encoder- oil temperature switch- automatic switch-off in the event of bridging in the container andinterruption of the pressing cycle due to foreign bodies- CE-compliant- automatic ON/OFF rotary encoder ON/OFF- Oil temperature monitor- 2 transport pipe bends 90°, radius 500No. 001 003 Gedpfezd Hcwox Ahzeud

Condition: used, Flame heating device, Roland Groß + Söhne GmbH Ring burner for heating, for weld preheating, casting preheating, etc. Type 1 x 1" Ionization Manufacturer No. ALMA, Year of manufacture 03/20 Connection voltage: 230 volts Pe gas max.: 500 mbar Pe air max.: 10 bar Vgas max.: 30 Nm3/h Vair max.: 300 Nm3/h Includes 10 different flame ring nozzles - Flame monitoring, Hans Henning - Ring nozzle, foldable design consisting of 2 halves, inner diameter 310 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 400 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 490 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 500 mm, with hose quick-connect coupling and ignition system, diffuser on the end face Godpedz Spwjfx Ahzeud - Ring nozzle, foldable design consisting of 2 halves, inner diameter 590 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 690 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 690 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 800 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 890 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 890 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 990 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, arc length 1500 mm, with hose quick-connect coupling and ignition system, diffuser in the center For heating pipes and containers. For heating steel to welding temperature. Ideal for repair welding and manufacturing of welded components made of fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high-velocity flame spraying. Heating with gas for thermal spraying.

Year of construction: 2015, condition: ready for operation (used), Wood rest shredder manufactured in 2015. This GROSS GAZ62 features an 18.5 kW motor and operates at a speed of 91 rpm. Weighing 1.3 tons, it is designed for efficient material processing. If you are looking to get high-quality shredding capabilities, consider the GROSS GAZ62 machine we have for sale. Contact us for further details. Gjdpfxozc Ik Us Ahzeud wood rest shredderBrand: GrossType: GAZ62Year of manufacture: 2015Technical dataMotor: 18.5 kWSpeed: 91 rpmVoltage: 400 VFrequency: 50 HzWeight: 1.3 t

Condition: used, Year of construction: 2013, Colour: Grey Price: On request Godpfxewz Nxxo Ahzsud - Year: 2013 - Documentation available: No - CE certificate present: No - Main motor power [kW]: 30 - Rotor width [mm]: 2500 - Number of shafts [pcs.]: 1 - Opening width [mm]: 3000 - Opening length [mm]: 1400 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels