Battery Charger BATIUM 15-24 - 1 pc

Gys

Condition: new, Storage location: 20319183 Lrjdj Afbhuepfx Akuou Transport dimensions (L x W x H): 0 x 0 x 0 ---- This innovative, grid-independent, mobile professional starting unit features two integrated, high-performance "EXIDE" spiral-cell batteries. The STARTPACK PRO 12.24 XL is ideally suited for starting vans, tractors, trucks, and buses, as well as even tanks with 12 or 24V batteries, without damaging the vehicle's electronics.

Condition: new, Battery charger STARTIUM 680 E 12/24 V 45 A GYS · Professional, portable jump-start and charging device · 4 charging levels (5-15-25-35 (boost)) · Enables 100% charging of all lead-acid battery types: liquid, gel, AGM, START-STOP, calcium, VRLA, starting from a residual voltage of 1V · High starting power · Automatic operation without remote control · Protects the vehicle's electronic systems in automatic mode · Charges starter batteries without overvoltage, requiring no supervision · SOS Recovery function · Automatically regulates the charging current and displays · Voltage and battery charge level on the digital display · Alternator test · Adjustable restart with storage of the last parameters Lsdpfe Ab Hufox Akueru · Cable Ø 25 mm x 2300 mm · Further technical specifications: Width: 370 mm · Length: 320 mm · Weight: 30 kg · Height: 650 mm Starting current: 12V: 380A / 24V: 270A 1V/C Length: 320 mm Height: 650 mm Charging voltage: 12 / 24 V Weight: 30 kg Width: 370 mm Capacity: 12V: 20-675 / 24V: 20-525 Ah Charging current: 45 A Power: 2200 W Mains voltage: 230 V

Condition: new, BATIUM 7-24 6/12/24 V battery charger, effective: 11 / arithmetic: 3-7 A, GYS · Automatic battery charger for professional workshops · Includes maintenance charging · 2 charging stages · Microprocessor-controlled Lsdpfx Ao Ab Ht Iekuoru · For maintenance-free charging of AGM, Gel, START-STOP, and lead-calcium starter batteries with 6V / 12V / 24V, without the need for monitoring · Protects vehicle electronics · Automatic charging of batteries with a residual voltage of 2V or higher · Forced charging of deeply discharged batteries (from 0.5V) possible · Reverse polarity and overvoltage protection · Fully insulated charging clamps · Other technical features: Width: 340mm Length: 210mm Weight: 5.4kg Height: 130mm Charging current: effective: 11 / arithmetic: 3-7 A Width: 340 mm Weight: 5.7 kg Length: 210 mm Capacity: 15-130 Ah Mains voltage: 230 V Charging voltage: 6 / 12 / 24 V Power: max. 210 W Height: 130 mm

Condition: new, GYSMI 200P electrode welding machine with accessories, 10-200 A, GYS · Features and applications: portable electrode welding machine for repair and maintenance work · For welding steel, stainless steel, cast iron, etc. · Practical and comfortable due to its low weight, significantly reduced size, and low power consumption · For welding stick electrodes in the size range of 1.6 - 5.0 mm · PROTEC 400: Protection against over/under voltage as well as mains voltage fluctuations (+/- 15 %) HOT START: improves the ignition properties ARC FORCE: stabilizes the arc ANTI STICKING: prevents the electrode from sticking quickly · Other technical features: Width: 140 mm · Length: 270 mm · Ignition type: Hot start · Weight: 5 kg · Protection class: IP 21 · Design: with accessories Lsdpfx Akj Abk R Deusru · Standard: EN 60974-1 · Height: 180 mm · Mains voltage: 230 V / 50/60 Hz · Power consumption: 10 A · Fuse: 32 A · Open-circuit voltage: 72 V Welding current range: 10 - 200 A Protection class: IP 21S Standard: EN 60974-1 Welding current at 60% duty cycle/40°C: 120 A Mains voltage: 1 x 230 V Weight: 5 kg Dimensions (L x W x H): 27 x 14 x 18 cm

Condition: new, GYSMI 160P electrode welding machine with accessories, 10-160 A, GYS · Features and applications: portable electrode welding machine for repair and maintenance work, for welding steel, stainless steel, cast iron, etc. Practical and convenient due to its low weight, significantly reduced size and low power consumption. · For welding electrode rods in the size range of 1.6 - 4.0 mm · PROTEC 400: protection against over/under voltage as well as fluctuations in mains voltage (+/- 15%) HOT START: improves ignition properties ARC FORCE: stabilizes the arc ANTI STICKING: prevents the electrode from sticking quickly · Other technical features: Width: 110 mm Length: 270 mm Welding voltage: 26.4 V Ignition type: Hot start Weight: 4.2 kg Protection class: IP 21 Design: with accessories Standard: EN60974-1 Height: 170 mm Mains voltage: 230 V / 50/60 Hz Power consumption: 10 A Fuse rating: 16 A Open-circuit voltage: 72 V Standard: EN60974-1 Welding current range: 10 - 160 A Welding voltage: 26.4 V Dimensions (L x W x H): 27 x 11 x 17 cm Fuse rating (slow-blow): 16 A Weight: 4.2 kg Protection class: IP 21S Power consumption (TIG/E): 16 A Welding current at 60% duty cycle/40° C: 85 A Open-circuit voltage: 72 V Mains voltage: 1 x 230 V Lsdps Abk Rwjfx Akueru

Condition: new, Year of construction: 2023, functionality: fully functional, total height: 550 mm, total width: 300 mm, total length: 680 mm, input voltage: 400 V, ground cable length: 3 mm, overall weight: 36 kg, type of cooling: air, welding current at 100% duty cycle: 280 A, input current: 320 A, welding current (min.): 10 A, welding current (max.): 320 A, input frequency: 60 Hz, Equipment: head guard, The GYS NEOPULSE 320 C is a professional digital three-phase welding power source designed for high-performance MIG/MAG, Pulse MIG/MAG, TIG DC, and MMA welding. Welding current: 10–320 A Power supply: 3 × 400 V AC, 50/60 Hz, ±15% Maximum input current: 26 A Effective input current: 22 A MIG/MAG duty cycle: 320 A 40%, 300 A 60%, 280 A 100% TIG DC duty cycle: 320 A 40%, 300 A 60%, 280 A 100% MMA duty cycle: 320 A 40%, 300 A 60%, 280 A 100% Open-circuit voltage: 85 V Wire feed speed: 1–22 m/min Lsdpfxoz H Uize Akueru Protection class: IP23 Insulation class: Class A Cooling: Air-cooled power source; compatible with an optional water-cooling unit for water-cooled torches Processes: MIG/MAG, Pulse MIG/MAG, TIG DC, and MMA Manufacturer: GYS S.A.S., France The NEOPULSE 320 C is equipped with digital synergic control, allowing for precise adjustment of welding parameters and providing stable, high-quality welding performance. It is suitable for welding mild steel, stainless steel, aluminum, and other alloys in professional and industrial applications.

Condition: new, The NEOMIG-i 500 G is a three-phase multiprocess welding machine with separate wire feeder. Its advanced digital technology and its duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. The integrated synergies facilitate setup and reduce spatter during welding. Equipped with the WF wire feeder, it offers a control precise welding parameters to ensure perfect quality. MULTI-PROCESS MIG/MAG : - steel and stainless steel wire: Ø 0.6 to 1.6 mm - aluminum wire : Ø 0.8 to 1.6 mm - CuSi and CuAl wire : Ø 0.8 to 1.6 mm - flux-cored wire (reverse polarity) : Ø 0.9 to 2.4 mm Lrodpfx Aomxkdpskusu MMA DC / Pulsed : basic, rutile and cellulosic electrodes. TIG DC Lift / Pulsed. Gouging.

Condition: new, With digital technology, the NEOPULSE 400 CW is a three-phase pulsed MIG / MAG generator for heavy industry. Mobile and equipped with a cooling unit and a high-performance unwinding system, the NEOPULSE 400 CW is ideal for tackling the most demanding applications. Intuitive and functional, its digital interface makes it possible to act on the welding parameters with ease. MULTIPROCESS WELDING MIG/MAG : - steel and stainless steel wire: Ø 0.6 to 1.6 mm - aluminum wire : Ø 0.8 to 1.6 mm - CuSi and CuAl wire : Ø 0.8 to 1.6 mm - Flux-cored wire: Ø 0.9 to 2.4 mm Lrodjmxkggepfx Akueu MMA DC / Pulsed: basic, rutile and cellulosic electrodes (up to Ø 6 mm). TIG DC CONTACT / PULSED. Gouging (up to Ø 6.5 mm).

Condition: used, Inverter welding machine for manual electric welding IMS - GYS type PROGYS FLEX 280A CEL MMA welding machine, inverter welding machine, manual electric welding inverter Serial no. IEC 60974 Year of manufacture 2020 Power with mains operation 400 Volt (40% ED) 280 Amp. Power with mains operation 400 Volt (60% ED) 200 Amp. Power for mains operation 400 Volt (100% ED) 170 Amp. Power for mains operation 230 Volt (40% ED) 200 Amp. Power for mains operation 230 Volt (60% ED) 180 Amp. Power for mains operation 230 Volt (100% ED) 150 Amp. Adjustment range 5-280 Amp. stepless Mains connection 230 / 400 Volt, 50 Hz. - Operating voltage from 110 to 480 volts alternating current - Adapts fully automatically to the existing mains supply - equipped with 16 Amp. CEE plug for 400 Volt mains voltage - Hot-start function (optimizes the ignition behaviour, simplifies the welding start of electrodes that are difficult to ignite) - Anti-stick function (optimizes electrode guidance and prevents the electrode from sticking) - Arc-Force function (optimizes arc stability and improves penetration) - Digital display - Plug socket for remote control connection - Earth cable with plug connection - Electrode tongs with 3 meter cable and plug connection - Stick electrode welding, can be used for all electrode types up to Ø 5 mm - TIG-DC welding (without TIG hosepack) - The device may be connected to a flexible three-phase power supply between 110 V and 480 V or to a fixed three-phase 400 V power supply (50 - 60 Hz) plus ground wire. Lrsdovg Rh Tjpfx Akusu This appliance may only be connected to a 3-phase power supply system with 4 conductors, where the neutral conductor is earthed. Dimensions (appliance without cable) L x W x H 470 x 270 x 430 mm Weight (without cable) 23 kg New, unused